diff mbox series

[1/2] arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180.

Message ID 1577106871-19863-2-git-send-email-rkambl@codeaurora.org (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series Add critical interrupt and cooling maps for TSENS in SC7180 | expand

Commit Message

Rajeshwari Ravindra Kamble Dec. 23, 2019, 1:14 p.m. UTC
Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 289 +++++++++++++++++++++++++++++------
 1 file changed, 239 insertions(+), 50 deletions(-)

Comments

Bjorn Andersson Dec. 27, 2019, 6:22 a.m. UTC | #1
On Mon 23 Dec 05:14 PST 2019, Rajeshwari wrote:

This patch adds critical interrupt to tsens nodes, add cooling maps,
renames nodes and renames labels.

While the end result looks reasonable I would like to see this split in
a few different patches - and perhaps a line or two in the commit
message describing the new naming scheme for the renames.

Thanks,
Bjorn

> Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 289 +++++++++++++++++++++++++++++------
>  1 file changed, 239 insertions(+), 50 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 3676bfd..e419ca0 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/phy/phy-qcom-qusb2.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	interrupt-parent = <&intc>;
> @@ -78,6 +79,7 @@
>  			reg = <0x0 0x0>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_0>;
> +			#cooling-cells = <2>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			L2_0: l2-cache {
>  				compatible = "cache";
> @@ -94,6 +96,7 @@
>  			reg = <0x0 0x100>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_100>;
> +			#cooling-cells = <2>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			L2_100: l2-cache {
>  				compatible = "cache";
> @@ -107,6 +110,7 @@
>  			reg = <0x0 0x200>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_200>;
> +			#cooling-cells = <2>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			L2_200: l2-cache {
>  				compatible = "cache";
> @@ -120,6 +124,7 @@
>  			reg = <0x0 0x300>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_300>;
> +			#cooling-cells = <2>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			L2_300: l2-cache {
>  				compatible = "cache";
> @@ -133,6 +138,7 @@
>  			reg = <0x0 0x400>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_400>;
> +			#cooling-cells = <2>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			L2_400: l2-cache {
>  				compatible = "cache";
> @@ -146,6 +152,7 @@
>  			reg = <0x0 0x500>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_500>;
> +			#cooling-cells = <2>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			L2_500: l2-cache {
>  				compatible = "cache";
> @@ -159,6 +166,7 @@
>  			reg = <0x0 0x600>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_600>;
> +			#cooling-cells = <2>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
>  			L2_600: l2-cache {
>  				compatible = "cache";
> @@ -172,6 +180,7 @@
>  			reg = <0x0 0x700>;
>  			enable-method = "psci";
>  			next-level-cache = <&L2_700>;
> +			#cooling-cells = <2>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
>  			L2_700: l2-cache {
>  				compatible = "cache";
> @@ -1058,8 +1067,9 @@
>  			reg = <0 0x0c263000 0 0x1ff>, /* TM */
>  				<0 0x0c222000 0 0x1ff>; /* SROT */
>  			#qcom,sensors = <15>;
> -			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
> -			interrupt-names = "uplow";
> +			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow","critical";
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> @@ -1068,8 +1078,9 @@
>  			reg = <0 0x0c265000 0 0x1ff>, /* TM */
>  				<0 0x0c223000 0 0x1ff>; /* SROT */
>  			#qcom,sensors = <10>;
> -			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
> -			interrupt-names = "uplow";
> +			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow","critical";
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> @@ -1301,277 +1312,455 @@
>  	};
>  
>  	thermal-zones {
> -		cpu0-thermal {
> +		cpu_0_0-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 1>;
>  
>  			trips {
> -				cpu0_alert0: trip-point0 {
> +				cpu_0_0_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu0_alert1: trip-point1 {
> +				cpu_0_0_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu0_crit: cpu_crit {
> +				cpu_0_0_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_0_0_alert0>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_0_0_alert1>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		cpu1-thermal {
> +		cpu_0_1-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 2>;
>  
>  			trips {
> -				cpu1_alert0: trip-point0 {
> +				cpu_0_1_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu1_alert1: trip-point1 {
> +				cpu_0_1_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu1_crit: cpu_crit {
> +				cpu_0_1_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_0_1_alert0>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_0_1_alert1>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		cpu2-thermal {
> +		cpu_0_2-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 3>;
>  
>  			trips {
> -				cpu2_alert0: trip-point0 {
> +				cpu_0_2_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu2_alert1: trip-point1 {
> +				cpu_0_2_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu2_crit: cpu_crit {
> +				cpu_0_2_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_0_2_alert0>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_0_2_alert1>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		cpu3-thermal {
> +		cpu_0_3-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 4>;
>  
>  			trips {
> -				cpu3_alert0: trip-point0 {
> +				cpu_0_3_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu3_alert1: trip-point1 {
> +				cpu_0_3_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu3_crit: cpu_crit {
> +				cpu_0_3_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_0_3_alert0>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_0_3_alert1>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		cpu4-thermal {
> +		cpu_0_4-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 5>;
>  
>  			trips {
> -				cpu4_alert0: trip-point0 {
> +				cpu_0_4_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu4_alert1: trip-point1 {
> +				cpu_0_4_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu4_crit: cpu_crit {
> +				cpu_0_4_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_0_4_alert0>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_0_4_alert1>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		cpu5-thermal {
> +		cpu_0_5-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 6>;
>  
>  			trips {
> -				cpu5_alert0: trip-point0 {
> +				cpu_0_5_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu5_alert1: trip-point1 {
> +				cpu_0_5_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu5_crit: cpu_crit {
> +				cpu_0_5_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_0_5_alert0>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_0_5_alert1>;
> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		cpu6-thermal {
> +		cpu_1_0-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 9>;
>  
>  			trips {
> -				cpu6_alert0: trip-point0 {
> +				cpu_1_0_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu6_alert1: trip-point1 {
> +				cpu_1_0_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu6_crit: cpu_crit {
> +				cpu_1_0_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_1_0_alert0>;
> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_1_0_alert1>;
> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		cpu7-thermal {
> +		cpu_1_1-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 10>;
>  
>  			trips {
> -				cpu7_alert0: trip-point0 {
> +				cpu_1_1_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu7_alert1: trip-point1 {
> +				cpu_1_1_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu7_crit: cpu_crit {
> +				cpu_1_1_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_1_1_alert0>;
> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_1_1_alert1>;
> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		cpu8-thermal {
> +		cpu_1_2-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 11>;
>  
>  			trips {
> -				cpu8_alert0: trip-point0 {
> +				cpu_1_2_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu8_alert1: trip-point1 {
> +				cpu_1_2_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu8_crit: cpu_crit {
> +				cpu_1_2_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_1_2_alert0>;
> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_1_2_alert1>;
> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		cpu9-thermal {
> +		cpu_1_3-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
>  			thermal-sensors = <&tsens0 12>;
>  
>  			trips {
> -				cpu9_alert0: trip-point0 {
> +				cpu_1_3_alert0: trip-point0 {
>  					temperature = <90000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu9_alert1: trip-point1 {
> +				cpu_1_3_alert1: trip-point1 {
>  					temperature = <95000>;
>  					hysteresis = <2000>;
>  					type = "passive";
>  				};
>  
> -				cpu9_crit: cpu_crit {
> +				cpu_1_3_crit: cpu_crit {
>  					temperature = <110000>;
>  					hysteresis = <1000>;
>  					type = "critical";
>  				};
>  			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_1_3_alert0>;
> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +				map1 {
> +					trip = <&cpu_1_3_alert1>;
> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
>  		};
>  
> -		aoss0-thermal {
> +		aoss_0-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
> @@ -1586,7 +1775,7 @@
>  			};
>  		};
>  
> -		cpuss0-thermal {
> +		cpuss_0-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
> @@ -1606,7 +1795,7 @@
>  			};
>  		};
>  
> -		cpuss1-thermal {
> +		cpuss_1-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
> @@ -1626,7 +1815,7 @@
>  			};
>  		};
>  
> -		gpuss0-thermal {
> +		gpuss_0-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
> @@ -1641,7 +1830,7 @@
>  			};
>  		};
>  
> -		gpuss1-thermal {
> +		gpuss_1-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
> @@ -1656,7 +1845,7 @@
>  			};
>  		};
>  
> -		aoss1-thermal {
> +		aoss_1-thermal {
>  			polling-delay-passive = <250>;
>  			polling-delay = <1000>;
>  
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
>
Rajeshwari Ravindra Kamble Dec. 27, 2019, 10:56 a.m. UTC | #2
On 12/27/2019 11:52 AM, Bjorn Andersson wrote:
> On Mon 23 Dec 05:14 PST 2019, Rajeshwari wrote:
>
> This patch adds critical interrupt to tsens nodes, add cooling maps,
> renames nodes and renames labels.
>
> While the end result looks reasonable I would like to see this split in
> a few different patches - and perhaps a line or two in the commit
> message describing the new naming scheme for the renames.
yeah sure, I'll provide separate patch for renames.
> Thanks,
> Rajeshwari
>
>> Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 289 +++++++++++++++++++++++++++++------
>>   1 file changed, 239 insertions(+), 50 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index 3676bfd..e419ca0 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -10,6 +10,7 @@
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>>   #include <dt-bindings/phy/phy-qcom-qusb2.h>
>>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +#include <dt-bindings/thermal/thermal.h>
>>   
>>   / {
>>   	interrupt-parent = <&intc>;
>> @@ -78,6 +79,7 @@
>>   			reg = <0x0 0x0>;
>>   			enable-method = "psci";
>>   			next-level-cache = <&L2_0>;
>> +			#cooling-cells = <2>;
>>   			qcom,freq-domain = <&cpufreq_hw 0>;
>>   			L2_0: l2-cache {
>>   				compatible = "cache";
>> @@ -94,6 +96,7 @@
>>   			reg = <0x0 0x100>;
>>   			enable-method = "psci";
>>   			next-level-cache = <&L2_100>;
>> +			#cooling-cells = <2>;
>>   			qcom,freq-domain = <&cpufreq_hw 0>;
>>   			L2_100: l2-cache {
>>   				compatible = "cache";
>> @@ -107,6 +110,7 @@
>>   			reg = <0x0 0x200>;
>>   			enable-method = "psci";
>>   			next-level-cache = <&L2_200>;
>> +			#cooling-cells = <2>;
>>   			qcom,freq-domain = <&cpufreq_hw 0>;
>>   			L2_200: l2-cache {
>>   				compatible = "cache";
>> @@ -120,6 +124,7 @@
>>   			reg = <0x0 0x300>;
>>   			enable-method = "psci";
>>   			next-level-cache = <&L2_300>;
>> +			#cooling-cells = <2>;
>>   			qcom,freq-domain = <&cpufreq_hw 0>;
>>   			L2_300: l2-cache {
>>   				compatible = "cache";
>> @@ -133,6 +138,7 @@
>>   			reg = <0x0 0x400>;
>>   			enable-method = "psci";
>>   			next-level-cache = <&L2_400>;
>> +			#cooling-cells = <2>;
>>   			qcom,freq-domain = <&cpufreq_hw 0>;
>>   			L2_400: l2-cache {
>>   				compatible = "cache";
>> @@ -146,6 +152,7 @@
>>   			reg = <0x0 0x500>;
>>   			enable-method = "psci";
>>   			next-level-cache = <&L2_500>;
>> +			#cooling-cells = <2>;
>>   			qcom,freq-domain = <&cpufreq_hw 0>;
>>   			L2_500: l2-cache {
>>   				compatible = "cache";
>> @@ -159,6 +166,7 @@
>>   			reg = <0x0 0x600>;
>>   			enable-method = "psci";
>>   			next-level-cache = <&L2_600>;
>> +			#cooling-cells = <2>;
>>   			qcom,freq-domain = <&cpufreq_hw 1>;
>>   			L2_600: l2-cache {
>>   				compatible = "cache";
>> @@ -172,6 +180,7 @@
>>   			reg = <0x0 0x700>;
>>   			enable-method = "psci";
>>   			next-level-cache = <&L2_700>;
>> +			#cooling-cells = <2>;
>>   			qcom,freq-domain = <&cpufreq_hw 1>;
>>   			L2_700: l2-cache {
>>   				compatible = "cache";
>> @@ -1058,8 +1067,9 @@
>>   			reg = <0 0x0c263000 0 0x1ff>, /* TM */
>>   				<0 0x0c222000 0 0x1ff>; /* SROT */
>>   			#qcom,sensors = <15>;
>> -			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
>> -			interrupt-names = "uplow";
>> +			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "uplow","critical";
>>   			#thermal-sensor-cells = <1>;
>>   		};
>>   
>> @@ -1068,8 +1078,9 @@
>>   			reg = <0 0x0c265000 0 0x1ff>, /* TM */
>>   				<0 0x0c223000 0 0x1ff>; /* SROT */
>>   			#qcom,sensors = <10>;
>> -			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
>> -			interrupt-names = "uplow";
>> +			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "uplow","critical";
>>   			#thermal-sensor-cells = <1>;
>>   		};
>>   
>> @@ -1301,277 +1312,455 @@
>>   	};
>>   
>>   	thermal-zones {
>> -		cpu0-thermal {
>> +		cpu_0_0-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 1>;
>>   
>>   			trips {
>> -				cpu0_alert0: trip-point0 {
>> +				cpu_0_0_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu0_alert1: trip-point1 {
>> +				cpu_0_0_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu0_crit: cpu_crit {
>> +				cpu_0_0_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_0_0_alert0>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_0_0_alert1>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		cpu1-thermal {
>> +		cpu_0_1-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 2>;
>>   
>>   			trips {
>> -				cpu1_alert0: trip-point0 {
>> +				cpu_0_1_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu1_alert1: trip-point1 {
>> +				cpu_0_1_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu1_crit: cpu_crit {
>> +				cpu_0_1_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_0_1_alert0>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_0_1_alert1>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		cpu2-thermal {
>> +		cpu_0_2-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 3>;
>>   
>>   			trips {
>> -				cpu2_alert0: trip-point0 {
>> +				cpu_0_2_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu2_alert1: trip-point1 {
>> +				cpu_0_2_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu2_crit: cpu_crit {
>> +				cpu_0_2_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_0_2_alert0>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_0_2_alert1>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		cpu3-thermal {
>> +		cpu_0_3-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 4>;
>>   
>>   			trips {
>> -				cpu3_alert0: trip-point0 {
>> +				cpu_0_3_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu3_alert1: trip-point1 {
>> +				cpu_0_3_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu3_crit: cpu_crit {
>> +				cpu_0_3_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_0_3_alert0>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_0_3_alert1>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		cpu4-thermal {
>> +		cpu_0_4-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 5>;
>>   
>>   			trips {
>> -				cpu4_alert0: trip-point0 {
>> +				cpu_0_4_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu4_alert1: trip-point1 {
>> +				cpu_0_4_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu4_crit: cpu_crit {
>> +				cpu_0_4_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_0_4_alert0>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_0_4_alert1>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		cpu5-thermal {
>> +		cpu_0_5-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 6>;
>>   
>>   			trips {
>> -				cpu5_alert0: trip-point0 {
>> +				cpu_0_5_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu5_alert1: trip-point1 {
>> +				cpu_0_5_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu5_crit: cpu_crit {
>> +				cpu_0_5_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_0_5_alert0>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_0_5_alert1>;
>> +					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		cpu6-thermal {
>> +		cpu_1_0-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 9>;
>>   
>>   			trips {
>> -				cpu6_alert0: trip-point0 {
>> +				cpu_1_0_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu6_alert1: trip-point1 {
>> +				cpu_1_0_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu6_crit: cpu_crit {
>> +				cpu_1_0_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_1_0_alert0>;
>> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_1_0_alert1>;
>> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		cpu7-thermal {
>> +		cpu_1_1-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 10>;
>>   
>>   			trips {
>> -				cpu7_alert0: trip-point0 {
>> +				cpu_1_1_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu7_alert1: trip-point1 {
>> +				cpu_1_1_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu7_crit: cpu_crit {
>> +				cpu_1_1_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_1_1_alert0>;
>> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_1_1_alert1>;
>> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		cpu8-thermal {
>> +		cpu_1_2-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 11>;
>>   
>>   			trips {
>> -				cpu8_alert0: trip-point0 {
>> +				cpu_1_2_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu8_alert1: trip-point1 {
>> +				cpu_1_2_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu8_crit: cpu_crit {
>> +				cpu_1_2_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_1_2_alert0>;
>> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_1_2_alert1>;
>> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		cpu9-thermal {
>> +		cpu_1_3-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>>   			thermal-sensors = <&tsens0 12>;
>>   
>>   			trips {
>> -				cpu9_alert0: trip-point0 {
>> +				cpu_1_3_alert0: trip-point0 {
>>   					temperature = <90000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu9_alert1: trip-point1 {
>> +				cpu_1_3_alert1: trip-point1 {
>>   					temperature = <95000>;
>>   					hysteresis = <2000>;
>>   					type = "passive";
>>   				};
>>   
>> -				cpu9_crit: cpu_crit {
>> +				cpu_1_3_crit: cpu_crit {
>>   					temperature = <110000>;
>>   					hysteresis = <1000>;
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_1_3_alert0>;
>> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +				map1 {
>> +					trip = <&cpu_1_3_alert1>;
>> +					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>> -		aoss0-thermal {
>> +		aoss_0-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>> @@ -1586,7 +1775,7 @@
>>   			};
>>   		};
>>   
>> -		cpuss0-thermal {
>> +		cpuss_0-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>> @@ -1606,7 +1795,7 @@
>>   			};
>>   		};
>>   
>> -		cpuss1-thermal {
>> +		cpuss_1-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>> @@ -1626,7 +1815,7 @@
>>   			};
>>   		};
>>   
>> -		gpuss0-thermal {
>> +		gpuss_0-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>> @@ -1641,7 +1830,7 @@
>>   			};
>>   		};
>>   
>> -		gpuss1-thermal {
>> +		gpuss_1-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>> @@ -1656,7 +1845,7 @@
>>   			};
>>   		};
>>   
>> -		aoss1-thermal {
>> +		aoss_1-thermal {
>>   			polling-delay-passive = <250>;
>>   			polling-delay = <1000>;
>>   
>> -- 
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>> of Code Aurora Forum, hosted by The Linux Foundation
>>
Amit Kucheria Jan. 1, 2020, 9:08 p.m. UTC | #3
On Mon, Dec 23, 2019 at 6:46 PM Rajeshwari <rkambl@codeaurora.org> wrote:
>
> Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 289 +++++++++++++++++++++++++++++------
>  1 file changed, 239 insertions(+), 50 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 3676bfd..e419ca0 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/phy/phy-qcom-qusb2.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/thermal/thermal.h>


<snip>

> -               cpu1-thermal {
> +               cpu_0_1-thermal {

Is this renaming to include the cluster number really improving
anything considering that the cpus section defines them as CPU0..CPU7?

Leave them as-is.

>                         polling-delay-passive = <250>;
>                         polling-delay = <1000>;
>
>                         thermal-sensors = <&tsens0 2>;
>
>                         trips {
> -                               cpu1_alert0: trip-point0 {
> +                               cpu_0_1_alert0: trip-point0 {

cpu_0_1_alert0 is unnecessarily too long, IMO. Leave it as-is. Same
for all the renames below.

>                                         temperature = <90000>;
>                                         hysteresis = <2000>;
>                                         type = "passive";
>                                 };
>
> -                               cpu1_alert1: trip-point1 {
> +                               cpu_0_1_alert1: trip-point1 {
>                                         temperature = <95000>;
>                                         hysteresis = <2000>;
>                                         type = "passive";
>                                 };
>
> -                               cpu1_crit: cpu_crit {
> +                               cpu_0_1_crit: cpu_crit {
>                                         temperature = <110000>;
>                                         hysteresis = <1000>;
>                                         type = "critical";
>                                 };
>                         };

<snip>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3676bfd..e419ca0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -10,6 +10,7 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -78,6 +79,7 @@ 
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 				compatible = "cache";
@@ -94,6 +96,7 @@ 
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
 				compatible = "cache";
@@ -107,6 +110,7 @@ 
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
 				compatible = "cache";
@@ -120,6 +124,7 @@ 
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
 				compatible = "cache";
@@ -133,6 +138,7 @@ 
 			reg = <0x0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_400: l2-cache {
 				compatible = "cache";
@@ -146,6 +152,7 @@ 
 			reg = <0x0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_500: l2-cache {
 				compatible = "cache";
@@ -159,6 +166,7 @@ 
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
 				compatible = "cache";
@@ -172,6 +180,7 @@ 
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
+			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_700: l2-cache {
 				compatible = "cache";
@@ -1058,8 +1067,9 @@ 
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 				<0 0x0c222000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <15>;
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -1068,8 +1078,9 @@ 
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 				<0 0x0c223000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -1301,277 +1312,455 @@ 
 	};
 
 	thermal-zones {
-		cpu0-thermal {
+		cpu_0_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				cpu0_alert0: trip-point0 {
+				cpu_0_0_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu0_alert1: trip-point1 {
+				cpu_0_0_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu0_crit: cpu_crit {
+				cpu_0_0_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu1-thermal {
+		cpu_0_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				cpu1_alert0: trip-point0 {
+				cpu_0_1_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu1_alert1: trip-point1 {
+				cpu_0_1_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu1_crit: cpu_crit {
+				cpu_0_1_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu2-thermal {
+		cpu_0_2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu2_alert0: trip-point0 {
+				cpu_0_2_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu2_alert1: trip-point1 {
+				cpu_0_2_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu2_crit: cpu_crit {
+				cpu_0_2_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu3-thermal {
+		cpu_0_3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				cpu3_alert0: trip-point0 {
+				cpu_0_3_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu3_alert1: trip-point1 {
+				cpu_0_3_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu3_crit: cpu_crit {
+				cpu_0_3_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu4-thermal {
+		cpu_0_4-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				cpu4_alert0: trip-point0 {
+				cpu_0_4_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu4_alert1: trip-point1 {
+				cpu_0_4_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu4_crit: cpu_crit {
+				cpu_0_4_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_4_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_4_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu5-thermal {
+		cpu_0_5-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
-				cpu5_alert0: trip-point0 {
+				cpu_0_5_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu5_alert1: trip-point1 {
+				cpu_0_5_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu5_crit: cpu_crit {
+				cpu_0_5_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_0_5_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_0_5_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu6-thermal {
+		cpu_1_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				cpu6_alert0: trip-point0 {
+				cpu_1_0_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu6_alert1: trip-point1 {
+				cpu_1_0_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu6_crit: cpu_crit {
+				cpu_1_0_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_1_0_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_1_0_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu7-thermal {
+		cpu_1_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu7_alert0: trip-point0 {
+				cpu_1_1_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu7_alert1: trip-point1 {
+				cpu_1_1_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu7_crit: cpu_crit {
+				cpu_1_1_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_1_1_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_1_1_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu8-thermal {
+		cpu_1_2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
-				cpu8_alert0: trip-point0 {
+				cpu_1_2_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu8_alert1: trip-point1 {
+				cpu_1_2_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu8_crit: cpu_crit {
+				cpu_1_2_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_1_2_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_1_2_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		cpu9-thermal {
+		cpu_1_3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
-				cpu9_alert0: trip-point0 {
+				cpu_1_3_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu9_alert1: trip-point1 {
+				cpu_1_3_alert1: trip-point1 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu9_crit: cpu_crit {
+				cpu_1_3_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_1_3_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_1_3_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		aoss0-thermal {
+		aoss_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1586,7 +1775,7 @@ 
 			};
 		};
 
-		cpuss0-thermal {
+		cpuss_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1606,7 +1795,7 @@ 
 			};
 		};
 
-		cpuss1-thermal {
+		cpuss_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1626,7 +1815,7 @@ 
 			};
 		};
 
-		gpuss0-thermal {
+		gpuss_0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1641,7 +1830,7 @@ 
 			};
 		};
 
-		gpuss1-thermal {
+		gpuss_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -1656,7 +1845,7 @@ 
 			};
 		};
 
-		aoss1-thermal {
+		aoss_1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;