| Message ID | a86be6121986d1c37b34f791532cd65ec13f1e00.1577976221.git.amit.kucheria@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | thermal: tsens: Handle critical interrupts | expand |
On Thu 02 Jan 06:54 PST 2020, Amit Kucheria wrote: > Register critical interrupts for each of the two tsens controllers > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> > Link: https://lore.kernel.org/r/3686bd40c99692feb955e936b608b080e2cb1826.1568624011.git.amit.kucheria@linaro.org I was under the impression that this series was already picked up, so I merged the three dts patches last week (it's a nop until the driver is updated anyways). Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index ddb1f23c936f..8986553cf2eb 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -2950,8 +2950,9 @@ > reg = <0 0x0c263000 0 0x1ff>, /* TM */ > <0 0x0c222000 0 0x1ff>; /* SROT */ > #qcom,sensors = <13>; > - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "uplow"; > + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow", "critical"; > #thermal-sensor-cells = <1>; > }; > > @@ -2960,8 +2961,9 @@ > reg = <0 0x0c265000 0 0x1ff>, /* TM */ > <0 0x0c223000 0 0x1ff>; /* SROT */ > #qcom,sensors = <8>; > - interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "uplow"; > + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow", "critical"; > #thermal-sensor-cells = <1>; > }; > > -- > 2.20.1 >
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index ddb1f23c936f..8986553cf2eb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2950,8 +2950,9 @@ reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -2960,8 +2961,9 @@ reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; - interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; };
Register critical interrupts for each of the two tsens controllers Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/3686bd40c99692feb955e936b608b080e2cb1826.1568624011.git.amit.kucheria@linaro.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)