diff mbox series

[v2] arm64: xen: Use modern annotations for assembly functions

Message ID 20191219122532.6538-1-broonie@kernel.org (mailing list archive)
State Mainlined
Commit b6a5c58240be8a9521358a4efcaadaa5e3586062
Headers show
Series [v2] arm64: xen: Use modern annotations for assembly functions | expand

Commit Message

Mark Brown Dec. 19, 2019, 12:25 p.m. UTC
In an effort to clarify and simplify the annotation of assembly functions
in the kernel new macros have been introduced. These replace ENTRY and
ENDPROC. Update the annotations in the xen code to the new macros.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Julien Grall <julien@xen.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
---
 arch/arm64/xen/hypercall.S | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Stefano Stabellini Dec. 19, 2019, 9:07 p.m. UTC | #1
On Thu, 19 Dec 2019, Mark Brown wrote:
> In an effort to clarify and simplify the annotation of assembly functions
> in the kernel new macros have been introduced. These replace ENTRY and
> ENDPROC. Update the annotations in the xen code to the new macros.
> 
> Signed-off-by: Mark Brown <broonie@kernel.org>
> Reviewed-by: Julien Grall <julien@xen.org>
> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

Thank you!

> ---
>  arch/arm64/xen/hypercall.S | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S
> index c5f05c4a4d00..5b09aca55108 100644
> --- a/arch/arm64/xen/hypercall.S
> +++ b/arch/arm64/xen/hypercall.S
> @@ -56,11 +56,11 @@
>  #define XEN_IMM 0xEA1
>  
>  #define HYPERCALL_SIMPLE(hypercall)		\
> -ENTRY(HYPERVISOR_##hypercall)			\
> +SYM_FUNC_START(HYPERVISOR_##hypercall)		\
>  	mov x16, #__HYPERVISOR_##hypercall;	\
>  	hvc XEN_IMM;				\
>  	ret;					\
> -ENDPROC(HYPERVISOR_##hypercall)
> +SYM_FUNC_END(HYPERVISOR_##hypercall)
>  
>  #define HYPERCALL0 HYPERCALL_SIMPLE
>  #define HYPERCALL1 HYPERCALL_SIMPLE
> @@ -86,7 +86,7 @@ HYPERCALL2(multicall);
>  HYPERCALL2(vm_assist);
>  HYPERCALL3(dm_op);
>  
> -ENTRY(privcmd_call)
> +SYM_FUNC_START(privcmd_call)
>  	mov x16, x0
>  	mov x0, x1
>  	mov x1, x2
> @@ -109,4 +109,4 @@ ENTRY(privcmd_call)
>  	 */
>  	uaccess_ttbr0_disable x6, x7
>  	ret
> -ENDPROC(privcmd_call);
> +SYM_FUNC_END(privcmd_call);
> -- 
> 2.20.1
>
Will Deacon Jan. 8, 2020, 3:55 p.m. UTC | #2
On Thu, Dec 19, 2019 at 01:07:50PM -0800, Stefano Stabellini wrote:
> On Thu, 19 Dec 2019, Mark Brown wrote:
> > In an effort to clarify and simplify the annotation of assembly functions
> > in the kernel new macros have been introduced. These replace ENTRY and
> > ENDPROC. Update the annotations in the xen code to the new macros.
> > 
> > Signed-off-by: Mark Brown <broonie@kernel.org>
> > Reviewed-by: Julien Grall <julien@xen.org>
> > Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
> 
> Thank you!
> 
> > ---
> >  arch/arm64/xen/hypercall.S | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)

Is this going via the Xen tree, or shall I queue it along with the other
asm annotation patches in the arm64 tree? I don't see it in -next yet.

Cheers,

Will
Catalin Marinas Jan. 9, 2020, 3:58 p.m. UTC | #3
On Wed, Jan 08, 2020 at 03:55:52PM +0000, Will Deacon wrote:
> On Thu, Dec 19, 2019 at 01:07:50PM -0800, Stefano Stabellini wrote:
> > On Thu, 19 Dec 2019, Mark Brown wrote:
> > > In an effort to clarify and simplify the annotation of assembly functions
> > > in the kernel new macros have been introduced. These replace ENTRY and
> > > ENDPROC. Update the annotations in the xen code to the new macros.
> > > 
> > > Signed-off-by: Mark Brown <broonie@kernel.org>
> > > Reviewed-by: Julien Grall <julien@xen.org>
> > > Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
> > 
> > Thank you!
> > 
> > > ---
> > >  arch/arm64/xen/hypercall.S | 8 ++++----
> > >  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> Is this going via the Xen tree, or shall I queue it along with the other
> asm annotation patches in the arm64 tree? I don't see it in -next yet.

Since it has been reviewed by the Xen maintainers, just queue it via the
arm64 tree.
Stefano Stabellini Jan. 9, 2020, 4:33 p.m. UTC | #4
On Thu, 9 Jan 2020, Catalin Marinas wrote:
> On Wed, Jan 08, 2020 at 03:55:52PM +0000, Will Deacon wrote:
> > On Thu, Dec 19, 2019 at 01:07:50PM -0800, Stefano Stabellini wrote:
> > > On Thu, 19 Dec 2019, Mark Brown wrote:
> > > > In an effort to clarify and simplify the annotation of assembly functions
> > > > in the kernel new macros have been introduced. These replace ENTRY and
> > > > ENDPROC. Update the annotations in the xen code to the new macros.
> > > > 
> > > > Signed-off-by: Mark Brown <broonie@kernel.org>
> > > > Reviewed-by: Julien Grall <julien@xen.org>
> > > > Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
> > > 
> > > Thank you!
> > > 
> > > > ---
> > > >  arch/arm64/xen/hypercall.S | 8 ++++----
> > > >  1 file changed, 4 insertions(+), 4 deletions(-)
> > 
> > Is this going via the Xen tree, or shall I queue it along with the other
> > asm annotation patches in the arm64 tree? I don't see it in -next yet.
> 
> Since it has been reviewed by the Xen maintainers, just queue it via the
> arm64 tree.

Yes, that's fine by me
Will Deacon Jan. 9, 2020, 4:35 p.m. UTC | #5
On Thu, Jan 09, 2020 at 08:33:37AM -0800, Stefano Stabellini wrote:
> On Thu, 9 Jan 2020, Catalin Marinas wrote:
> > On Wed, Jan 08, 2020 at 03:55:52PM +0000, Will Deacon wrote:
> > > On Thu, Dec 19, 2019 at 01:07:50PM -0800, Stefano Stabellini wrote:
> > > > On Thu, 19 Dec 2019, Mark Brown wrote:
> > > > > In an effort to clarify and simplify the annotation of assembly functions
> > > > > in the kernel new macros have been introduced. These replace ENTRY and
> > > > > ENDPROC. Update the annotations in the xen code to the new macros.
> > > > > 
> > > > > Signed-off-by: Mark Brown <broonie@kernel.org>
> > > > > Reviewed-by: Julien Grall <julien@xen.org>
> > > > > Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
> > > > 
> > > > Thank you!
> > > > 
> > > > > ---
> > > > >  arch/arm64/xen/hypercall.S | 8 ++++----
> > > > >  1 file changed, 4 insertions(+), 4 deletions(-)
> > > 
> > > Is this going via the Xen tree, or shall I queue it along with the other
> > > asm annotation patches in the arm64 tree? I don't see it in -next yet.
> > 
> > Since it has been reviewed by the Xen maintainers, just queue it via the
> > arm64 tree.
> 
> Yes, that's fine by me

Done. Will update the branch tomorrow.

Cheers,

Will
diff mbox series

Patch

diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S
index c5f05c4a4d00..5b09aca55108 100644
--- a/arch/arm64/xen/hypercall.S
+++ b/arch/arm64/xen/hypercall.S
@@ -56,11 +56,11 @@ 
 #define XEN_IMM 0xEA1
 
 #define HYPERCALL_SIMPLE(hypercall)		\
-ENTRY(HYPERVISOR_##hypercall)			\
+SYM_FUNC_START(HYPERVISOR_##hypercall)		\
 	mov x16, #__HYPERVISOR_##hypercall;	\
 	hvc XEN_IMM;				\
 	ret;					\
-ENDPROC(HYPERVISOR_##hypercall)
+SYM_FUNC_END(HYPERVISOR_##hypercall)
 
 #define HYPERCALL0 HYPERCALL_SIMPLE
 #define HYPERCALL1 HYPERCALL_SIMPLE
@@ -86,7 +86,7 @@  HYPERCALL2(multicall);
 HYPERCALL2(vm_assist);
 HYPERCALL3(dm_op);
 
-ENTRY(privcmd_call)
+SYM_FUNC_START(privcmd_call)
 	mov x16, x0
 	mov x0, x1
 	mov x1, x2
@@ -109,4 +109,4 @@  ENTRY(privcmd_call)
 	 */
 	uaccess_ttbr0_disable x6, x7
 	ret
-ENDPROC(privcmd_call);
+SYM_FUNC_END(privcmd_call);