diff mbox

[1/6] arm/cpuimx51: gpio_to_irq() should be used to get irq from gpio number

Message ID 1313135701-22456-2-git-send-email-shawn.guo@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Shawn Guo Aug. 12, 2011, 7:54 a.m. UTC
Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq
from gpio number.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/board-cpuimx51.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Comments

Jason Liu Aug. 12, 2011, 9:36 a.m. UTC | #1
2011/8/12 Shawn Guo <shawn.guo@linaro.org>:
> Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq
> from gpio number.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  arch/arm/mach-mx5/board-cpuimx51.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
> index 7c893fa..68934ea 100644
> --- a/arch/arm/mach-mx5/board-cpuimx51.c
> +++ b/arch/arm/mach-mx5/board-cpuimx51.c
> @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
>                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
>        }, {
>                .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
> -               .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
> +               .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
>                .irqflags = IRQF_TRIGGER_HIGH,
>                .uartclk = CPUIMX51_QUART_XTAL,
>                .regshift = CPUIMX51_QUART_REGSHIFT,
> --

The fix has already in Sascah's tree:

Author: Ben Dooks <ben-linux@fluff.org>
Date:   Thu Aug 4 16:47:35 2011 +0100

    ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage

    irq_to_gpio() is being called on a GPIO so change to using
    gpio_to_irq() instead.

    Signed-off-by: Ben Dooks <ben-linux@fluff.org>
    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Jason

> 1.7.4.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
Shawn Guo Aug. 12, 2011, 11:13 a.m. UTC | #2
On Fri, Aug 12, 2011 at 05:36:32PM +0800, Jason Liu wrote:
> 2011/8/12 Shawn Guo <shawn.guo@linaro.org>:
> > Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq
> > from gpio number.
> >
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  arch/arm/mach-mx5/board-cpuimx51.c |    2 +-
> >  1 files changed, 1 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
> > index 7c893fa..68934ea 100644
> > --- a/arch/arm/mach-mx5/board-cpuimx51.c
> > +++ b/arch/arm/mach-mx5/board-cpuimx51.c
> > @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
> >                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
> >        }, {
> >                .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
> > -               .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
> > +               .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
> >                .irqflags = IRQF_TRIGGER_HIGH,
> >                .uartclk = CPUIMX51_QUART_XTAL,
> >                .regshift = CPUIMX51_QUART_REGSHIFT,
> > --
> 
> The fix has already in Sascah's tree:
> 
> Author: Ben Dooks <ben-linux@fluff.org>
> Date:   Thu Aug 4 16:47:35 2011 +0100
> 
>     ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage
> 
>     irq_to_gpio() is being called on a GPIO so change to using
>     gpio_to_irq() instead.
> 
>     Signed-off-by: Ben Dooks <ben-linux@fluff.org>
>     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> 
> Jason
> 
Sorry, I missed that.  Thanks for pointing it out, Jason.

I will fold Ben's patch here, as I see Russell would probably pick up
the series.  Otherwise, Russell, please let me know if I should base
it on Sascha's tree.
Russell King - ARM Linux Aug. 13, 2011, 9:35 a.m. UTC | #3
On Fri, Aug 12, 2011 at 07:13:07PM +0800, Shawn Guo wrote:
> On Fri, Aug 12, 2011 at 05:36:32PM +0800, Jason Liu wrote:
> > 2011/8/12 Shawn Guo <shawn.guo@linaro.org>:
> > > Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq
> > > from gpio number.
> > >
> > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > > ---
> > >  arch/arm/mach-mx5/board-cpuimx51.c |    2 +-
> > >  1 files changed, 1 insertions(+), 1 deletions(-)
> > >
> > > diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
> > > index 7c893fa..68934ea 100644
> > > --- a/arch/arm/mach-mx5/board-cpuimx51.c
> > > +++ b/arch/arm/mach-mx5/board-cpuimx51.c
> > > @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
> > >                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
> > >        }, {
> > >                .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
> > > -               .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
> > > +               .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
> > >                .irqflags = IRQF_TRIGGER_HIGH,
> > >                .uartclk = CPUIMX51_QUART_XTAL,
> > >                .regshift = CPUIMX51_QUART_REGSHIFT,
> > > --
> > 
> > The fix has already in Sascah's tree:
> > 
> > Author: Ben Dooks <ben-linux@fluff.org>
> > Date:   Thu Aug 4 16:47:35 2011 +0100
> > 
> >     ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage
> > 
> >     irq_to_gpio() is being called on a GPIO so change to using
> >     gpio_to_irq() instead.
> > 
> >     Signed-off-by: Ben Dooks <ben-linux@fluff.org>
> >     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > 
> > Jason
> > 
> Sorry, I missed that.  Thanks for pointing it out, Jason.
> 
> I will fold Ben's patch here, as I see Russell would probably pick up
> the series.  Otherwise, Russell, please let me know if I should base
> it on Sascha's tree.

Shouldn't this patch be targetted for -rc and maybe stable?  It's
difficult to tell from the commit description whether it really does
cause a runtime problem or not.

If it does go in to a -rc, then I can easily move my gpio patch set
forward.
Shawn Guo Aug. 13, 2011, 12:12 p.m. UTC | #4
On Sat, Aug 13, 2011 at 10:35:29AM +0100, Russell King - ARM Linux wrote:
> On Fri, Aug 12, 2011 at 07:13:07PM +0800, Shawn Guo wrote:
> > On Fri, Aug 12, 2011 at 05:36:32PM +0800, Jason Liu wrote:
> > > 2011/8/12 Shawn Guo <shawn.guo@linaro.org>:
> > > > Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq
> > > > from gpio number.
> > > >
> > > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > > > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > > > ---
> > > >  arch/arm/mach-mx5/board-cpuimx51.c |    2 +-
> > > >  1 files changed, 1 insertions(+), 1 deletions(-)
> > > >
> > > > diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
> > > > index 7c893fa..68934ea 100644
> > > > --- a/arch/arm/mach-mx5/board-cpuimx51.c
> > > > +++ b/arch/arm/mach-mx5/board-cpuimx51.c
> > > > @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
> > > >                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
> > > >        }, {
> > > >                .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
> > > > -               .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
> > > > +               .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
> > > >                .irqflags = IRQF_TRIGGER_HIGH,
> > > >                .uartclk = CPUIMX51_QUART_XTAL,
> > > >                .regshift = CPUIMX51_QUART_REGSHIFT,
> > > > --
> > > 
> > > The fix has already in Sascah's tree:
> > > 
> > > Author: Ben Dooks <ben-linux@fluff.org>
> > > Date:   Thu Aug 4 16:47:35 2011 +0100
> > > 
> > >     ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage
> > > 
> > >     irq_to_gpio() is being called on a GPIO so change to using
> > >     gpio_to_irq() instead.
> > > 
> > >     Signed-off-by: Ben Dooks <ben-linux@fluff.org>
> > >     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > > 
> > > Jason
> > > 
> > Sorry, I missed that.  Thanks for pointing it out, Jason.
> > 
> > I will fold Ben's patch here, as I see Russell would probably pick up
> > the series.  Otherwise, Russell, please let me know if I should base
> > it on Sascha's tree.
> 
> Shouldn't this patch be targetted for -rc and maybe stable?  It's
> difficult to tell from the commit description whether it really does
> cause a runtime problem or not.
> 
> If it does go in to a -rc, then I can easily move my gpio patch set
> forward.
> 
Ah, yes.  I just noticed that the patch is on the way to -rc2 through
arm-soc tree.
diff mbox

Patch

diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 7c893fa..68934ea 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -81,7 +81,7 @@  static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,