| Message ID | 20200113141555.16117-2-beniamin.bia@analog.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface | expand |
On Mon, Jan 13, 2020 at 8:14 AM Beniamin Bia <beniamin.bia@analog.com> wrote: > > From: Michael Hennerich <michael.hennerich@analog.com> > > Document support for Analog Devices MC425A Step Attenuator. > > Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> > Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> > --- > .../bindings/iio/amplifiers/adi,hmc425a.yaml | 55 +++++++++++++++++++ > 1 file changed, 55 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml Check your bindings with 'make dt_binding_check'. It fails: Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml: while scanning a simple key in "<unicode string>", line 24, column 5 could not find expected ':' in "<unicode string>", line 25, column 5 > > diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml > new file mode 100644 > index 000000000000..6f4a292395e4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml > @@ -0,0 +1,55 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: HMC425A 6-bit Digital Step Attenuator > + > +maintainers: > +- Michael Hennerich <michael.hennerich@analog.com> > + > +description: | > + Digital Step Attenuator IIO device with gpio interface. > + HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz > + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf > + > +properties: > +compatible: > + enum: > + - adi,hmc425a nit: this should be indented 2 more spaces. Or use 'const' instead if there's not more similar parts. > + > +vcc-supply: > + description: > + digital voltage regulator (see regulator/regulator.txt) Text must be indented under the key. > + maxItems: 1 > + > +ctrl-gpios: > + description: > + Must contain an array of 6 GPIO specifiers, referring to the GPIO pins > + connected to the control pins V1-V6. > + maxItems: 6 > + > +required: > +- compatible > +- ctrl-gpios > + > +examples: > +- | > + #include <dt-bindings/gpio/gpio.h> > + > + &gpio { > + #address-cells = <1>; > + #size-cells = <0>; > + gpio_hmc425a: hmc425a { > + compatible = "adi,hmc425a"; > + ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>, > + <&gpio 39 GPIO_ACTIVE_HIGH>, > + <&gpio 38 GPIO_ACTIVE_HIGH>, > + <&gpio 37 GPIO_ACTIVE_HIGH>, > + <&gpio 36 GPIO_ACTIVE_HIGH>, > + <&gpio 35 GPIO_ACTIVE_HIGH>; > + > + vcc-supply = <&foo>; > + }; > + } > -- > 2.17.1 >
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml new file mode 100644 index 000000000000..6f4a292395e4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HMC425A 6-bit Digital Step Attenuator + +maintainers: +- Michael Hennerich <michael.hennerich@analog.com> + +description: | + Digital Step Attenuator IIO device with gpio interface. + HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + +properties: +compatible: + enum: + - adi,hmc425a + +vcc-supply: + description: + digital voltage regulator (see regulator/regulator.txt) + maxItems: 1 + +ctrl-gpios: + description: + Must contain an array of 6 GPIO specifiers, referring to the GPIO pins + connected to the control pins V1-V6. + maxItems: 6 + +required: +- compatible +- ctrl-gpios + +examples: +- | + #include <dt-bindings/gpio/gpio.h> + + &gpio { + #address-cells = <1>; + #size-cells = <0>; + gpio_hmc425a: hmc425a { + compatible = "adi,hmc425a"; + ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>, + <&gpio 39 GPIO_ACTIVE_HIGH>, + <&gpio 38 GPIO_ACTIVE_HIGH>, + <&gpio 37 GPIO_ACTIVE_HIGH>, + <&gpio 36 GPIO_ACTIVE_HIGH>, + <&gpio 35 GPIO_ACTIVE_HIGH>; + + vcc-supply = <&foo>; + }; + }