diff mbox series

[v2,13/17] dt-bindings: atmel-usart: remove wildcard

Message ID 1578673089-3484-14-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
State New, archived
Headers show
Series add device tree for SAM9X60 SoC and SAM9X60-EK board | expand

Commit Message

Claudiu Beznea Jan. 10, 2020, 4:18 p.m. UTC
Remove chip whildcard and introduce the list of compatibles instead.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 Documentation/devicetree/bindings/mfd/atmel-usart.txt | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Rob Herring (Arm) Jan. 14, 2020, 12:24 a.m. UTC | #1
On Fri, Jan 10, 2020 at 06:18:05PM +0200, Claudiu Beznea wrote:
> Remove chip whildcard and introduce the list of compatibles instead.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  Documentation/devicetree/bindings/mfd/atmel-usart.txt | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
> index 699fd3c9ace8..09013c49f6cc 100644
> --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
> +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
> @@ -1,10 +1,11 @@
>  * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
>  
>  Required properties for USART:
> -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
> -  The compatible <chip> indicated will be the first SoC to support an
> -  additional mode or an USART new feature.
> -  For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
> +- compatible: Should be one of the following:
> +	- "atmel,at91rm9200-usart"
> +	- "atmel,at91sam9260-usart"
> +	- "atmel,at91rm9200-dbgu"
> +	- "atmel,at91sam9260-dbgu"

Should be:

"atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
"atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"

>  - reg: Should contain registers location and length
>  - interrupts: Should contain interrupt
>  - clock-names: tuple listing input clock names.
> -- 
> 2.7.4
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 699fd3c9ace8..09013c49f6cc 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
@@ -1,10 +1,11 @@ 
 * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
 
 Required properties for USART:
-- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
-  The compatible <chip> indicated will be the first SoC to support an
-  additional mode or an USART new feature.
-  For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
+- compatible: Should be one of the following:
+	- "atmel,at91rm9200-usart"
+	- "atmel,at91sam9260-usart"
+	- "atmel,at91rm9200-dbgu"
+	- "atmel,at91sam9260-dbgu"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt
 - clock-names: tuple listing input clock names.