diff mbox series

[v3,2/6] thermal: brcmstb_thermal: Prepare to support a different process

Message ID 20200114190607.29339-3-f.fainelli@gmail.com (mailing list archive)
State Accepted
Delegated to: Daniel Lezcano
Headers show
Series brcmstb_thermal updates for new processes | expand

Commit Message

Florian Fainelli Jan. 14, 2020, 7:06 p.m. UTC
The driver is currently assuming that it is operating with a 28nm
process chip, which has a specific formula to convert temperature to a
code and vice versa. Update the code to support providing two key
values: offset and multiplier to derive the correct formulas.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/thermal/broadcom/brcmstb_thermal.c | 47 +++++++++++++++-------
 1 file changed, 33 insertions(+), 14 deletions(-)

Comments

Amit Kucheria Jan. 15, 2020, 5:59 a.m. UTC | #1
On Wed, Jan 15, 2020 at 12:36 AM Florian Fainelli <f.fainelli@gmail.com> wrote:
>
> The driver is currently assuming that it is operating with a 28nm
> process chip, which has a specific formula to convert temperature to a
> code and vice versa. Update the code to support providing two key
> values: offset and multiplier to derive the correct formulas.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>

> ---
>  drivers/thermal/broadcom/brcmstb_thermal.c | 47 +++++++++++++++-------
>  1 file changed, 33 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
> index 680f1a070606..2d555e7b884a 100644
> --- a/drivers/thermal/broadcom/brcmstb_thermal.c
> +++ b/drivers/thermal/broadcom/brcmstb_thermal.c
> @@ -102,18 +102,27 @@ static struct avs_tmon_trip avs_tmon_trips[] = {
>         },
>  };
>
> +struct brcmstb_thermal_params {
> +       unsigned int offset;
> +       unsigned int mult;
> +};
> +
>  struct brcmstb_thermal_priv {
>         void __iomem *tmon_base;
>         struct device *dev;
>         struct thermal_zone_device *thermal;
> +       /* Process specific thermal parameters used for calculations */
> +       const struct brcmstb_thermal_params *temp_params;
>  };
>
>  /* Convert a HW code to a temperature reading (millidegree celsius) */
> -static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
> +static inline int avs_tmon_code_to_temp(struct brcmstb_thermal_priv *priv,
>                                         u32 code)
>  {
> -       return (AVS_TMON_TEMP_OFFSET -
> -               (int)((code & AVS_TMON_TEMP_MAX) * AVS_TMON_TEMP_SLOPE));
> +       int offset = priv->temp_params->offset;
> +       int mult = priv->temp_params->mult;
> +
> +       return (offset - (int)((code & AVS_TMON_TEMP_MASK) * mult));
>  }
>
>  /*
> @@ -122,21 +131,22 @@ static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
>   * @temp: temperature to convert
>   * @low: if true, round toward the low side
>   */
> -static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz,
> +static inline u32 avs_tmon_temp_to_code(struct brcmstb_thermal_priv *priv,
>                                         int temp, bool low)
>  {
> +       int offset = priv->temp_params->offset;
> +       int mult = priv->temp_params->mult;
> +
>         if (temp < AVS_TMON_TEMP_MIN)
>                 return AVS_TMON_TEMP_MAX;       /* Maximum code value */
>
> -       if (temp >= AVS_TMON_TEMP_OFFSET)
> +       if (temp >= offset)
>                 return 0;       /* Minimum code value */
>
>         if (low)
> -               return (u32)(DIV_ROUND_UP(AVS_TMON_TEMP_OFFSET - temp,
> -                                         AVS_TMON_TEMP_SLOPE));
> +               return (u32)(DIV_ROUND_UP(offset - temp, mult));
>         else
> -               return (u32)((AVS_TMON_TEMP_OFFSET - temp) /
> -                             AVS_TMON_TEMP_SLOPE);
> +               return (u32)((offset - temp) / mult);
>  }
>
>  static int brcmstb_get_temp(void *data, int *temp)
> @@ -154,7 +164,7 @@ static int brcmstb_get_temp(void *data, int *temp)
>
>         val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
>
> -       t = avs_tmon_code_to_temp(priv->thermal, val);
> +       t = avs_tmon_code_to_temp(priv, val);
>         if (t < 0)
>                 *temp = 0;
>         else
> @@ -188,7 +198,7 @@ static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
>         val &= trip->reg_msk;
>         val >>= trip->reg_shift;
>
> -       return avs_tmon_code_to_temp(priv->thermal, val);
> +       return avs_tmon_code_to_temp(priv, val);
>  }
>
>  static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
> @@ -201,7 +211,7 @@ static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
>         dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
>
>         /* round toward low temp for the low interrupt */
> -       val = avs_tmon_temp_to_code(priv->thermal, temp,
> +       val = avs_tmon_temp_to_code(priv, temp,
>                                     type == TMON_TRIP_TYPE_LOW);
>
>         val <<= trip->reg_shift;
> @@ -218,7 +228,7 @@ static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
>         u32 val;
>
>         val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
> -       return avs_tmon_code_to_temp(priv->thermal, val);
> +       return avs_tmon_code_to_temp(priv, val);
>  }
>
>  static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
> @@ -282,8 +292,13 @@ static const struct thermal_zone_of_device_ops of_ops = {
>         .set_trips      = brcmstb_set_trips,
>  };
>
> +static const struct brcmstb_thermal_params brcmstb_28nm_params = {
> +       .offset = 410040,
> +       .mult   = 487,
> +};
> +
>  static const struct of_device_id brcmstb_thermal_id_table[] = {
> -       { .compatible = "brcm,avs-tmon" },
> +       { .compatible = "brcm,avs-tmon", .data = &brcmstb_28nm_params },
>         {},
>  };
>  MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
> @@ -299,6 +314,10 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
>         if (!priv)
>                 return -ENOMEM;
>
> +       priv->temp_params = of_device_get_match_data(&pdev->dev);
> +       if (!priv->temp_params)
> +               return -EINVAL;
> +
>         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>         priv->tmon_base = devm_ioremap_resource(&pdev->dev, res);
>         if (IS_ERR(priv->tmon_base))
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 680f1a070606..2d555e7b884a 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -102,18 +102,27 @@  static struct avs_tmon_trip avs_tmon_trips[] = {
 	},
 };
 
+struct brcmstb_thermal_params {
+	unsigned int offset;
+	unsigned int mult;
+};
+
 struct brcmstb_thermal_priv {
 	void __iomem *tmon_base;
 	struct device *dev;
 	struct thermal_zone_device *thermal;
+	/* Process specific thermal parameters used for calculations */
+	const struct brcmstb_thermal_params *temp_params;
 };
 
 /* Convert a HW code to a temperature reading (millidegree celsius) */
-static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
+static inline int avs_tmon_code_to_temp(struct brcmstb_thermal_priv *priv,
 					u32 code)
 {
-	return (AVS_TMON_TEMP_OFFSET -
-		(int)((code & AVS_TMON_TEMP_MAX) * AVS_TMON_TEMP_SLOPE));
+	int offset = priv->temp_params->offset;
+	int mult = priv->temp_params->mult;
+
+	return (offset - (int)((code & AVS_TMON_TEMP_MASK) * mult));
 }
 
 /*
@@ -122,21 +131,22 @@  static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
  * @temp: temperature to convert
  * @low: if true, round toward the low side
  */
-static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz,
+static inline u32 avs_tmon_temp_to_code(struct brcmstb_thermal_priv *priv,
 					int temp, bool low)
 {
+	int offset = priv->temp_params->offset;
+	int mult = priv->temp_params->mult;
+
 	if (temp < AVS_TMON_TEMP_MIN)
 		return AVS_TMON_TEMP_MAX;	/* Maximum code value */
 
-	if (temp >= AVS_TMON_TEMP_OFFSET)
+	if (temp >= offset)
 		return 0;	/* Minimum code value */
 
 	if (low)
-		return (u32)(DIV_ROUND_UP(AVS_TMON_TEMP_OFFSET - temp,
-					  AVS_TMON_TEMP_SLOPE));
+		return (u32)(DIV_ROUND_UP(offset - temp, mult));
 	else
-		return (u32)((AVS_TMON_TEMP_OFFSET - temp) /
-			      AVS_TMON_TEMP_SLOPE);
+		return (u32)((offset - temp) / mult);
 }
 
 static int brcmstb_get_temp(void *data, int *temp)
@@ -154,7 +164,7 @@  static int brcmstb_get_temp(void *data, int *temp)
 
 	val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
 
-	t = avs_tmon_code_to_temp(priv->thermal, val);
+	t = avs_tmon_code_to_temp(priv, val);
 	if (t < 0)
 		*temp = 0;
 	else
@@ -188,7 +198,7 @@  static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
 	val &= trip->reg_msk;
 	val >>= trip->reg_shift;
 
-	return avs_tmon_code_to_temp(priv->thermal, val);
+	return avs_tmon_code_to_temp(priv, val);
 }
 
 static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
@@ -201,7 +211,7 @@  static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
 	dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
 
 	/* round toward low temp for the low interrupt */
-	val = avs_tmon_temp_to_code(priv->thermal, temp,
+	val = avs_tmon_temp_to_code(priv, temp,
 				    type == TMON_TRIP_TYPE_LOW);
 
 	val <<= trip->reg_shift;
@@ -218,7 +228,7 @@  static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
 	u32 val;
 
 	val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
-	return avs_tmon_code_to_temp(priv->thermal, val);
+	return avs_tmon_code_to_temp(priv, val);
 }
 
 static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
@@ -282,8 +292,13 @@  static const struct thermal_zone_of_device_ops of_ops = {
 	.set_trips	= brcmstb_set_trips,
 };
 
+static const struct brcmstb_thermal_params brcmstb_28nm_params = {
+	.offset	= 410040,
+	.mult	= 487,
+};
+
 static const struct of_device_id brcmstb_thermal_id_table[] = {
-	{ .compatible = "brcm,avs-tmon" },
+	{ .compatible = "brcm,avs-tmon", .data = &brcmstb_28nm_params },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
@@ -299,6 +314,10 @@  static int brcmstb_thermal_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
+	priv->temp_params = of_device_get_match_data(&pdev->dev);
+	if (!priv->temp_params)
+		return -EINVAL;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->tmon_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(priv->tmon_base))