Message ID | 20200120100014.23488-1-kraxel@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | fbdev: wait for references go away | expand |
Hi, On 1/20/20 11:00 AM, Gerd Hoffmann wrote: > Problem: do_unregister_framebuffer() might return before the device is > fully cleaned up, due to userspace having a file handle for /dev/fb0 do_unregister_framebuffer() doesn't guarantee that fb_info is freed after function's return (it only drops the kernel reference on fb_info). > open. Which can result in drm driver not being able to grab resources > (and fail initialization) because the firmware framebuffer still holds > them. Reportedly plymouth can trigger this. Could you please describe issue some more? I guess that a problem is happening during DRM driver load while fbdev driver is loaded? I assume do_unregister_framebuffer() is called inside do_remove_conflicting_framebuffers()? At first glance it seems to be an user-space issue as it should not be holding references on /dev/fb0 while DRM driver is being loaded. > Fix this by trying to wait until all references are gone. Don't wait > forever though given that userspace might keep the file handle open. Where does the 1s maximum delay come from? Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics > Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> > --- > drivers/video/fbdev/core/fbmem.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c > index d04554959ea7..2ea8ac05b065 100644 > --- a/drivers/video/fbdev/core/fbmem.c > +++ b/drivers/video/fbdev/core/fbmem.c > @@ -35,6 +35,7 @@ > #include <linux/fbcon.h> > #include <linux/mem_encrypt.h> > #include <linux/pci.h> > +#include <linux/delay.h> > > #include <asm/fb.h> > > @@ -1707,6 +1708,8 @@ static void unlink_framebuffer(struct fb_info *fb_info) > > static void do_unregister_framebuffer(struct fb_info *fb_info) > { > + int limit = 100; > + > unlink_framebuffer(fb_info); > if (fb_info->pixmap.addr && > (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT)) > @@ -1726,6 +1729,10 @@ static void do_unregister_framebuffer(struct fb_info *fb_info) > fbcon_fb_unregistered(fb_info); > console_unlock(); > > + /* try wait until all references are gone */ > + while (atomic_read(&fb_info->count) > 1 && --limit > 0) > + msleep(10); > + > /* this may free fb info */ > put_fb_info(fb_info); > }
On 1/20/20 6:51 PM, Bartlomiej Zolnierkiewicz wrote: > do_unregister_framebuffer() doesn't guarantee that fb_info is freed after > function's return (it only drops the kernel reference on fb_info). s/kernel/fbdev device driver/ Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics
On Mon, Jan 20, 2020 at 06:51:17PM +0100, Bartlomiej Zolnierkiewicz wrote: > I guess that a problem is happening during DRM driver load while fbdev > driver is loaded? I assume do_unregister_framebuffer() is called inside > do_remove_conflicting_framebuffers()? Yes, exactly. More details here: https://lists.linuxfoundation.org/pipermail/virtualization/2020-January/045026.html > At first glance it seems to be an user-space issue as it should not be > holding references on /dev/fb0 while DRM driver is being loaded. How plymouth would know when exactly it needs to release /dev/fb0?
Hi, > > open. Which can result in drm driver not being able to grab resources > > (and fail initialization) because the firmware framebuffer still holds > > them. Reportedly plymouth can trigger this. > > Could you please describe issue some more? > > I guess that a problem is happening during DRM driver load while fbdev > driver is loaded? I assume do_unregister_framebuffer() is called inside > do_remove_conflicting_framebuffers()? Yes. Specifically bochs-drm.ko and efifb in virtual machines. > At first glance it seems to be an user-space issue as it should not be > holding references on /dev/fb0 while DRM driver is being loaded. Well, the drm driver is loaded by udev like everything else. Dunno what plymouth (graphical boot screen tool) does to handle the situation. I guess listening to udev events. So it should notice efifb going away and drop the /dev/fb0 reference, but this races against bochs-drm initializing. > > Fix this by trying to wait until all references are gone. Don't wait > > forever though given that userspace might keep the file handle open. > > Where does the 1s maximum delay come from? Pulled out something out of thin air which I expect being on the safe side. plymouth responding on the udev event should need only a small fraction of that. cheers, Gerd
On 1/21/20 6:53 AM, Gerd Hoffmann wrote: > Hi, > >>> open. Which can result in drm driver not being able to grab resources >>> (and fail initialization) because the firmware framebuffer still holds >>> them. Reportedly plymouth can trigger this. >> >> Could you please describe issue some more? >> >> I guess that a problem is happening during DRM driver load while fbdev >> driver is loaded? I assume do_unregister_framebuffer() is called inside >> do_remove_conflicting_framebuffers()? > > Yes. Specifically bochs-drm.ko and efifb in virtual machines. > >> At first glance it seems to be an user-space issue as it should not be >> holding references on /dev/fb0 while DRM driver is being loaded. > > Well, the drm driver is loaded by udev like everything else. > > Dunno what plymouth (graphical boot screen tool) does to handle the > situation. I guess listening to udev events. So it should notice efifb > going away and drop the /dev/fb0 reference, but this races against > bochs-drm initializing. It has been a week and there have been no alternative proposals to address the problem so I incline to accepting this approach.. However please rework the patch slightly: - Don't wait in the usual fb_info removal code-path, only in the driver replacement one. You can achieve this by adding additional "bool wait" parameter to do_unregister_framebuffer() - Add a FIXME comment just before the wait loop with the description of the issue (the above explanation of the race between plymouth and udev would be fine) so we will remember why this workaround is needed. - Change patch summary to something more descriptive (i.e. to "fbdev: workaround race on driver replacement"). Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics >>> Fix this by trying to wait until all references are gone. Don't wait >>> forever though given that userspace might keep the file handle open. >> >> Where does the 1s maximum delay come from? > > Pulled out something out of thin air which I expect being on the safe > side. plymouth responding on the udev event should need only a small > fraction of that. > > cheers, > Gerd
On Mon, Jan 20, 2020 at 11:00 AM Gerd Hoffmann <kraxel@redhat.com> wrote: > > Problem: do_unregister_framebuffer() might return before the device is > fully cleaned up, due to userspace having a file handle for /dev/fb0 > open. Which can result in drm driver not being able to grab resources > (and fail initialization) because the firmware framebuffer still holds > them. Reportedly plymouth can trigger this. > > Fix this by trying to wait until all references are gone. Don't wait > forever though given that userspace might keep the file handle open. > > Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> (Missed this because lca, so a bit late) This isn't really how driver unload is supposed to happen. Instead: - Driver unload starts - Driver calls the foo_unregister function, which stops new userspace from getting at the driver. If you're subsystem is good (i.e. drm since Noralf fixed it) this will also sufficiently synchronize with any pending ioctl. - Important: This does _not_ wait until userspace closes all references. You can't force that. - Driver releases all hw structures and mappings and everything else. With fbdev this is currently not fully race free because no one is synchronizing with userspace everywhere correctly. ... much time can pass ... - Userspace releases the last references, which triggers the final destroy stuff and which releases the memory occupied by various structures still (but not anything releated to hw or anything else really). So there's two bits: 1. Synchronizing with pending ioctls. This is mostly there already with lock_fb_info/unlock_fb_info. From a quick look the missing bit seems to be that the unregister code is not taking that lock, and so not sufficiently synchronizing against concurrent ioctl calls and other stuff. Plus would need to audit all entry points. 1a. fbcon works differently. Don't look too closely, but this is also not the problem your facing here. 2. Refcounting of the fb structure and hw teardown. That's what's tracked in fb_info->count. Most likely the fbdev driver you have has a wrong split between the hw teardown code and what's in fb_destroy. If you have any hw cleanup code in fb_destroy that driver is buggy. efifb is very buggy in that area :-) Same for offb, simplefb, vesafb and vesa16fb. We might need a new fb_unregister callback for these drivers to be able to fix this properly. Because the unregister comes from the fbdev core, and not the driver as usual, so the usual driver unload sequence doesnt work: drm_dev_unregister(); ... release all hw resource ... drm_dev_put(); Or in terms of fbdev: unregister_framebuffer(info); ... release all hw resources ... <- everyone gets this wrong framebuffer_release(info); <- also wrong because not refcounted, hooray, this should be moved to to end of the ->fb_destroy callback So we need a callback to put the "release all hw resources" step into the flow at the right place. Another option (slightly less midlayer) would be to add a fb_takeover hook, for these platforms drivers, which would then do the above sequence (like at driver unload). Also adding Noralf, since he's fixed up all the drm stuff in this area in the past. Cheers, Daniel > --- > drivers/video/fbdev/core/fbmem.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c > index d04554959ea7..2ea8ac05b065 100644 > --- a/drivers/video/fbdev/core/fbmem.c > +++ b/drivers/video/fbdev/core/fbmem.c > @@ -35,6 +35,7 @@ > #include <linux/fbcon.h> > #include <linux/mem_encrypt.h> > #include <linux/pci.h> > +#include <linux/delay.h> > > #include <asm/fb.h> > > @@ -1707,6 +1708,8 @@ static void unlink_framebuffer(struct fb_info *fb_info) > > static void do_unregister_framebuffer(struct fb_info *fb_info) > { > + int limit = 100; > + > unlink_framebuffer(fb_info); > if (fb_info->pixmap.addr && > (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT)) > @@ -1726,6 +1729,10 @@ static void do_unregister_framebuffer(struct fb_info *fb_info) > fbcon_fb_unregistered(fb_info); > console_unlock(); > > + /* try wait until all references are gone */ > + while (atomic_read(&fb_info->count) > 1 && --limit > 0) > + msleep(10); > + > /* this may free fb info */ > put_fb_info(fb_info); > } > -- > 2.18.1 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Tue, Jan 28, 2020 at 5:39 PM Daniel Vetter <daniel@ffwll.ch> wrote: > > On Mon, Jan 20, 2020 at 11:00 AM Gerd Hoffmann <kraxel@redhat.com> wrote: > > > > Problem: do_unregister_framebuffer() might return before the device is > > fully cleaned up, due to userspace having a file handle for /dev/fb0 > > open. Which can result in drm driver not being able to grab resources > > (and fail initialization) because the firmware framebuffer still holds > > them. Reportedly plymouth can trigger this. > > > > Fix this by trying to wait until all references are gone. Don't wait > > forever though given that userspace might keep the file handle open. > > > > Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> > > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> > > (Missed this because lca, so a bit late) > > This isn't really how driver unload is supposed to happen. Instead: > > - Driver unload starts > - Driver calls the foo_unregister function, which stops new userspace > from getting at the driver. If you're subsystem is good (i.e. drm > since Noralf fixed it) this will also sufficiently synchronize with > any pending ioctl. > - Important: This does _not_ wait until userspace closes all > references. You can't force that. > - Driver releases all hw structures and mappings and everything else. > With fbdev this is currently not fully race free because no one is > synchronizing with userspace everywhere correctly. > > ... much time can pass ... > > - Userspace releases the last references, which triggers the final > destroy stuff and which releases the memory occupied by various > structures still (but not anything releated to hw or anything else > really). > > So there's two bits: > > 1. Synchronizing with pending ioctls. This is mostly there already > with lock_fb_info/unlock_fb_info. From a quick look the missing bit > seems to be that the unregister code is not taking that lock, and so > not sufficiently synchronizing against concurrent ioctl calls and > other stuff. Plus would need to audit all entry points. Correction: The check here is file_fb_info(), which checks for unregister. Except it's totally racy and misses the end marker (unlike drm_dev_enter/exit in drm). So bunch of work to do here too. The lock_fb_info is purely locking, not lifetime (and I think in a bunch of places way too late). > 1a. fbcon works differently. Don't look too closely, but this is also > not the problem your facing here. > > 2. Refcounting of the fb structure and hw teardown. That's what's > tracked in fb_info->count. Most likely the fbdev driver you have has a > wrong split between the hw teardown code and what's in fb_destroy. If > you have any hw cleanup code in fb_destroy that driver is buggy. efifb > is very buggy in that area :-) Same for offb, simplefb, vesafb and > vesa16fb. > > We might need a new fb_unregister callback for these drivers to be > able to fix this properly. Because the unregister comes from the fbdev > core, and not the driver as usual, so the usual driver unload sequence > doesnt work: > > drm_dev_unregister(); > ... release all hw resource ... > > drm_dev_put(); > > Or in terms of fbdev: > > unregister_framebuffer(info); > ... release all hw resources ... <- everyone gets this wrong > framebuffer_release(info); <- also wrong because not refcounted, > hooray, this should be moved to to end of the ->fb_destroy callback > > So we need a callback to put the "release all hw resources" step into > the flow at the right place. Another option (slightly less midlayer) > would be to add a fb_takeover hook, for these platforms drivers, which > would then do the above sequence (like at driver unload). > > Also adding Noralf, since he's fixed up all the drm stuff in this area > in the past. > > Cheers, Daniel > > > --- > > drivers/video/fbdev/core/fbmem.c | 7 +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c > > index d04554959ea7..2ea8ac05b065 100644 > > --- a/drivers/video/fbdev/core/fbmem.c > > +++ b/drivers/video/fbdev/core/fbmem.c > > @@ -35,6 +35,7 @@ > > #include <linux/fbcon.h> > > #include <linux/mem_encrypt.h> > > #include <linux/pci.h> > > +#include <linux/delay.h> > > > > #include <asm/fb.h> > > > > @@ -1707,6 +1708,8 @@ static void unlink_framebuffer(struct fb_info *fb_info) > > > > static void do_unregister_framebuffer(struct fb_info *fb_info) > > { > > + int limit = 100; > > + > > unlink_framebuffer(fb_info); > > if (fb_info->pixmap.addr && > > (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT)) > > @@ -1726,6 +1729,10 @@ static void do_unregister_framebuffer(struct fb_info *fb_info) > > fbcon_fb_unregistered(fb_info); > > console_unlock(); > > > > + /* try wait until all references are gone */ > > + while (atomic_read(&fb_info->count) > 1 && --limit > 0) > > + msleep(10); > > + > > /* this may free fb info */ > > put_fb_info(fb_info); > > } > > -- > > 2.18.1 > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch
On Tue, Jan 28, 2020 at 5:44 PM Daniel Vetter <daniel@ffwll.ch> wrote: > > On Tue, Jan 28, 2020 at 5:39 PM Daniel Vetter <daniel@ffwll.ch> wrote: > > > > On Mon, Jan 20, 2020 at 11:00 AM Gerd Hoffmann <kraxel@redhat.com> wrote: > > > > > > Problem: do_unregister_framebuffer() might return before the device is > > > fully cleaned up, due to userspace having a file handle for /dev/fb0 > > > open. Which can result in drm driver not being able to grab resources > > > (and fail initialization) because the firmware framebuffer still holds > > > them. Reportedly plymouth can trigger this. > > > > > > Fix this by trying to wait until all references are gone. Don't wait > > > forever though given that userspace might keep the file handle open. > > > > > > Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> > > > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> > > > > (Missed this because lca, so a bit late) > > > > This isn't really how driver unload is supposed to happen. Instead: > > > > - Driver unload starts > > - Driver calls the foo_unregister function, which stops new userspace > > from getting at the driver. If you're subsystem is good (i.e. drm > > since Noralf fixed it) this will also sufficiently synchronize with > > any pending ioctl. > > - Important: This does _not_ wait until userspace closes all > > references. You can't force that. > > - Driver releases all hw structures and mappings and everything else. > > With fbdev this is currently not fully race free because no one is > > synchronizing with userspace everywhere correctly. > > > > ... much time can pass ... > > > > - Userspace releases the last references, which triggers the final > > destroy stuff and which releases the memory occupied by various > > structures still (but not anything releated to hw or anything else > > really). > > > > So there's two bits: > > > > 1. Synchronizing with pending ioctls. This is mostly there already > > with lock_fb_info/unlock_fb_info. From a quick look the missing bit > > seems to be that the unregister code is not taking that lock, and so > > not sufficiently synchronizing against concurrent ioctl calls and > > other stuff. Plus would need to audit all entry points. > > Correction: The check here is file_fb_info(), which checks for > unregister. Except it's totally racy and misses the end marker (unlike > drm_dev_enter/exit in drm). So bunch of work to do here too. The > lock_fb_info is purely locking, not lifetime (and I think in a bunch > of places way too late). Oh and since your patch is full of races too I expect you'll be able to get away with just adding the ->fb_remove hook, fix up drivers, and leave fixing the various races to someone else. -Daniel > > > 1a. fbcon works differently. Don't look too closely, but this is also > > not the problem your facing here. > > > > 2. Refcounting of the fb structure and hw teardown. That's what's > > tracked in fb_info->count. Most likely the fbdev driver you have has a > > wrong split between the hw teardown code and what's in fb_destroy. If > > you have any hw cleanup code in fb_destroy that driver is buggy. efifb > > is very buggy in that area :-) Same for offb, simplefb, vesafb and > > vesa16fb. > > > > We might need a new fb_unregister callback for these drivers to be > > able to fix this properly. Because the unregister comes from the fbdev > > core, and not the driver as usual, so the usual driver unload sequence > > doesnt work: > > > > drm_dev_unregister(); > > ... release all hw resource ... > > > > drm_dev_put(); > > > > Or in terms of fbdev: > > > > unregister_framebuffer(info); > > ... release all hw resources ... <- everyone gets this wrong > > framebuffer_release(info); <- also wrong because not refcounted, > > hooray, this should be moved to to end of the ->fb_destroy callback > > > > So we need a callback to put the "release all hw resources" step into > > the flow at the right place. Another option (slightly less midlayer) > > would be to add a fb_takeover hook, for these platforms drivers, which > > would then do the above sequence (like at driver unload). > > > > Also adding Noralf, since he's fixed up all the drm stuff in this area > > in the past. > > > > Cheers, Daniel > > > > > --- > > > drivers/video/fbdev/core/fbmem.c | 7 +++++++ > > > 1 file changed, 7 insertions(+) > > > > > > diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c > > > index d04554959ea7..2ea8ac05b065 100644 > > > --- a/drivers/video/fbdev/core/fbmem.c > > > +++ b/drivers/video/fbdev/core/fbmem.c > > > @@ -35,6 +35,7 @@ > > > #include <linux/fbcon.h> > > > #include <linux/mem_encrypt.h> > > > #include <linux/pci.h> > > > +#include <linux/delay.h> > > > > > > #include <asm/fb.h> > > > > > > @@ -1707,6 +1708,8 @@ static void unlink_framebuffer(struct fb_info *fb_info) > > > > > > static void do_unregister_framebuffer(struct fb_info *fb_info) > > > { > > > + int limit = 100; > > > + > > > unlink_framebuffer(fb_info); > > > if (fb_info->pixmap.addr && > > > (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT)) > > > @@ -1726,6 +1729,10 @@ static void do_unregister_framebuffer(struct fb_info *fb_info) > > > fbcon_fb_unregistered(fb_info); > > > console_unlock(); > > > > > > + /* try wait until all references are gone */ > > > + while (atomic_read(&fb_info->count) > 1 && --limit > 0) > > > + msleep(10); > > > + > > > /* this may free fb info */ > > > put_fb_info(fb_info); > > > } > > > -- > > > 2.18.1 > > > > > > _______________________________________________ > > > dri-devel mailing list > > > dri-devel@lists.freedesktop.org > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > > > > > > > -- > > Daniel Vetter > > Software Engineer, Intel Corporation > > +41 (0) 79 365 57 48 - http://blog.ffwll.ch > > > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index d04554959ea7..2ea8ac05b065 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -35,6 +35,7 @@ #include <linux/fbcon.h> #include <linux/mem_encrypt.h> #include <linux/pci.h> +#include <linux/delay.h> #include <asm/fb.h> @@ -1707,6 +1708,8 @@ static void unlink_framebuffer(struct fb_info *fb_info) static void do_unregister_framebuffer(struct fb_info *fb_info) { + int limit = 100; + unlink_framebuffer(fb_info); if (fb_info->pixmap.addr && (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT)) @@ -1726,6 +1729,10 @@ static void do_unregister_framebuffer(struct fb_info *fb_info) fbcon_fb_unregistered(fb_info); console_unlock(); + /* try wait until all references are gone */ + while (atomic_read(&fb_info->count) > 1 && --limit > 0) + msleep(10); + /* this may free fb info */ put_fb_info(fb_info); }
Problem: do_unregister_framebuffer() might return before the device is fully cleaned up, due to userspace having a file handle for /dev/fb0 open. Which can result in drm driver not being able to grab resources (and fail initialization) because the firmware framebuffer still holds them. Reportedly plymouth can trigger this. Fix this by trying to wait until all references are gone. Don't wait forever though given that userspace might keep the file handle open. Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> --- drivers/video/fbdev/core/fbmem.c | 7 +++++++ 1 file changed, 7 insertions(+)