diff mbox series

[v4,3/7] input: keyboard: Add support for Azoteq IQS620A/621/622/624/625

Message ID 1579228475-6681-4-git-send-email-jeff@labundy.com (mailing list archive)
State New, archived
Headers show
Series Add support for Azoteq IQS620A/621/622/624/625 | expand

Commit Message

Jeff LaBundy Jan. 17, 2020, 2:35 a.m. UTC
This patch adds key and switch support for the Azoteq IQS620A,
IQS621, IQS622, IQS624 and IQS625 multi-function sensors.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
Changes in v4:
  - None

Changes in v3:
  - None

Changes in v2:
  - Merged 'Copyright' and 'Author' lines into one in introductory comments
  - Replaced 'error' with 'ret' throughout
  - Updated iqs62x_keys_parse_prop to use unified device property interface
  - Clarified the comment in iqs62x_keys_notifier to state that wheel up or
    down events elicit an emulated release cycle
  - Eliminated tabbed alignment of platform_driver struct members

 drivers/input/keyboard/Kconfig       |  10 ++
 drivers/input/keyboard/Makefile      |   1 +
 drivers/input/keyboard/iqs62x-keys.c | 340 +++++++++++++++++++++++++++++++++++
 3 files changed, 351 insertions(+)
 create mode 100644 drivers/input/keyboard/iqs62x-keys.c

--
2.7.4

Comments

Dmitry Torokhov Jan. 17, 2020, 9:33 p.m. UTC | #1
Hi Jeff,

On Fri, Jan 17, 2020 at 02:35:46AM +0000, Jeff LaBundy wrote:
> This patch adds key and switch support for the Azoteq IQS620A,
> IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
> 
> Signed-off-by: Jeff LaBundy <jeff@labundy.com>
> ---
> Changes in v4:
>   - None
> 
> Changes in v3:
>   - None
> 
> Changes in v2:
>   - Merged 'Copyright' and 'Author' lines into one in introductory comments
>   - Replaced 'error' with 'ret' throughout
>   - Updated iqs62x_keys_parse_prop to use unified device property interface
>   - Clarified the comment in iqs62x_keys_notifier to state that wheel up or
>     down events elicit an emulated release cycle
>   - Eliminated tabbed alignment of platform_driver struct members
> 
>  drivers/input/keyboard/Kconfig       |  10 ++
>  drivers/input/keyboard/Makefile      |   1 +
>  drivers/input/keyboard/iqs62x-keys.c | 340 +++++++++++++++++++++++++++++++++++
>  3 files changed, 351 insertions(+)
>  create mode 100644 drivers/input/keyboard/iqs62x-keys.c
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 4706ff0..28de965 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -663,6 +663,16 @@ config KEYBOARD_IPAQ_MICRO
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ipaq-micro-keys.
> 
> +config KEYBOARD_IQS62X
> +	tristate "Azoteq IQS620A/621/622/624/625 keys and switches"
> +	depends on MFD_IQS62X
> +	help
> +	  Say Y here to enable key and switch support for the Azoteq IQS620A,
> +	  IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
> +
> +	  To compile this driver as a module, choose M here: the module will
> +	  be called iqs62x-keys.
> +
>  config KEYBOARD_OMAP
>  	tristate "TI OMAP keypad support"
>  	depends on ARCH_OMAP1
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index f5b1752..1d689fd 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
>  obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
>  obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
>  obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
> +obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
>  obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
>  obj-$(CONFIG_KEYBOARD_IMX_SC_KEY)	+= imx_sc_key.o
>  obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
> diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
> new file mode 100644
> index 0000000..b477334
> --- /dev/null
> +++ b/drivers/input/keyboard/iqs62x-keys.c
> @@ -0,0 +1,340 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Azoteq IQS620A/621/622/624/625 Keys and Switches
> + *
> + * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/iqs62x.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +enum {
> +	IQS62X_SW_HALL_N,
> +	IQS62X_SW_HALL_S,
> +};
> +
> +static const char * const iqs62x_switch_names[] = {
> +	[IQS62X_SW_HALL_N] = "hall-switch-north",
> +	[IQS62X_SW_HALL_S] = "hall-switch-south",
> +};
> +
> +struct iqs62x_switch_desc {
> +	enum iqs62x_event_flag flag;
> +	unsigned int code;
> +	bool enabled;
> +};
> +
> +struct iqs62x_keys_private {
> +	struct iqs62x_core *iqs62x;
> +	struct input_dev *input;
> +	struct notifier_block notifier;
> +	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
> +	unsigned int keycode[IQS62X_NUM_KEYS];
> +	unsigned int keycodemax;
> +	u8 interval;
> +};
> +
> +static int iqs62x_keys_parse_prop(struct platform_device *pdev,
> +				  struct iqs62x_keys_private *iqs62x_keys)
> +{
> +	struct fwnode_handle *child;
> +	unsigned int val;
> +	int ret, i;
> +
> +	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
> +					     NULL, 0);

You can use device_property_count_u32().

> +	if (ret > IQS62X_NUM_KEYS) {
> +		dev_err(&pdev->dev, "Too many keycodes present\n");
> +		return -EINVAL;
> +	} else if (ret < 0) {
> +		dev_err(&pdev->dev, "Failed to count keycodes: %d\n", ret);
> +		return ret;
> +	}
> +	iqs62x_keys->keycodemax = ret;
> +
> +	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
> +					     iqs62x_keys->keycode,
> +					     iqs62x_keys->keycodemax);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
> +		return ret;
> +	}

I wonder why you can't simply use

	error = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
						iqs62x_keys->keycode,
						IQS62X_NUM_KEYS);

Are you concerned with someone trying to set up keys that are not
actually exposed later via EVOCSKEYCODES and that is why you are
limiting keycodemax?

> +
> +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> +		child = device_get_named_child_node(&pdev->dev,
> +						    iqs62x_switch_names[i]);
> +		if (!child)
> +			continue;
> +
> +		ret = fwnode_property_read_u32(child, "linux,code", &val);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
> +				ret);
> +			return ret;
> +		}
> +		iqs62x_keys->switches[i].code = val;
> +		iqs62x_keys->switches[i].enabled = true;
> +
> +		if (fwnode_property_present(child, "azoteq,use-prox"))
> +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> +							 IQS62X_EVENT_HALL_N_P :
> +							 IQS62X_EVENT_HALL_S_P);
> +		else
> +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> +							 IQS62X_EVENT_HALL_N_T :
> +							 IQS62X_EVENT_HALL_S_T);
> +	}
> +
> +	return 0;
> +}
> +
> +static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
> +{
> +	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
> +	enum iqs62x_event_flag flag;
> +	unsigned int event_mask_reg;
> +	unsigned int event_mask = 0;
> +	unsigned int val;
> +	int ret, i;
> +
> +	switch (iqs62x->dev_desc->prod_num) {
> +	case IQS620_PROD_NUM:
> +	case IQS621_PROD_NUM:
> +	case IQS622_PROD_NUM:
> +		event_mask_reg = IQS620_GLBL_EVENT_MASK;
> +
> +		/*
> +		 * Discreet button, hysteresis and SAR UI flags represent keys
> +		 * and are unmasked if mapped to a valid keycode.
> +		 */
> +		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> +			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
> +				continue;
> +
> +			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
> +				event_mask |= iqs62x->dev_desc->prox_mask;
> +			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
> +				event_mask |= (iqs62x->dev_desc->hyst_mask |
> +					       iqs62x->dev_desc->sar_mask);
> +		}
> +
> +		ret = regmap_read(iqs62x->map, iqs62x->dev_desc->hall_flags,
> +				  &val);
> +		if (ret)
> +			return ret;
> +
> +		/*
> +		 * Hall UI flags represent switches and are unmasked if their
> +		 * corresponding child nodes are present.
> +		 */
> +		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> +			if (!(iqs62x_keys->switches[i].enabled))
> +				continue;
> +
> +			flag = iqs62x_keys->switches[i].flag;
> +
> +			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
> +				continue;
> +
> +			event_mask |= iqs62x->dev_desc->hall_mask;
> +
> +			input_report_switch(iqs62x_keys->input,
> +					    iqs62x_keys->switches[i].code,
> +					    (val & iqs62x_events[flag].mask) ==
> +					    iqs62x_events[flag].val);
> +		}
> +
> +		input_sync(iqs62x_keys->input);
> +		break;
> +
> +	case IQS624_PROD_NUM:
> +		event_mask_reg = IQS624_HALL_UI;
> +
> +		/*
> +		 * Interval change events represent keys and are unmasked if
> +		 * either wheel movement flag is mapped to a valid keycode.
> +		 */
> +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
> +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> +
> +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
> +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> +
> +		ret = regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
> +				  &val);
> +		if (ret)
> +			return ret;
> +
> +		iqs62x_keys->interval = val;
> +		break;
> +
> +	default:
> +		return 0;
> +	}
> +
> +	return regmap_update_bits(iqs62x->map, event_mask_reg, event_mask, 0);
> +}
> +
> +static int iqs62x_keys_notifier(struct notifier_block *notifier,
> +				unsigned long event_flags, void *context)
> +{
> +	struct iqs62x_event_data *event_data = context;
> +	struct iqs62x_keys_private *iqs62x_keys;
> +	int ret, i;
> +
> +	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
> +				   notifier);
> +
> +	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
> +		ret = iqs62x_keys_init(iqs62x_keys);
> +		if (ret) {
> +			dev_err(iqs62x_keys->input->dev.parent,
> +				"Failed to re-initialize device: %d\n", ret);
> +			return NOTIFY_BAD;
> +		}
> +
> +		return NOTIFY_OK;
> +	}
> +
> +	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> +		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
> +		    event_data->interval == iqs62x_keys->interval)
> +			continue;
> +
> +		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
> +				 event_flags & BIT(i));
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> +		if (iqs62x_keys->switches[i].enabled)
> +			input_report_switch(iqs62x_keys->input,
> +					    iqs62x_keys->switches[i].code,
> +					    event_flags &
> +					    BIT(iqs62x_keys->switches[i].flag));
> +
> +	input_sync(iqs62x_keys->input);
> +
> +	if (event_data->interval == iqs62x_keys->interval)
> +		return NOTIFY_OK;
> +
> +	/*
> +	 * Each frame contains at most one wheel event (up or down), in which
> +	 * case a complementary release cycle is emulated.
> +	 */
> +	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
> +		input_report_key(iqs62x_keys->input,
> +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
> +				 0);
> +		input_sync(iqs62x_keys->input);
> +	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
> +		input_report_key(iqs62x_keys->input,
> +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
> +				 0);
> +		input_sync(iqs62x_keys->input);
> +	}
> +
> +	iqs62x_keys->interval = event_data->interval;
> +
> +	return NOTIFY_OK;
> +}
> +
> +static int iqs62x_keys_probe(struct platform_device *pdev)
> +{
> +	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
> +	struct iqs62x_keys_private *iqs62x_keys;
> +	struct input_dev *input;
> +	int ret, i;
> +
> +	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
> +				   GFP_KERNEL);
> +	if (!iqs62x_keys)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, iqs62x_keys);
> +
> +	ret = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
> +	if (ret)
> +		return ret;
> +
> +	input = devm_input_allocate_device(&pdev->dev);
> +	if (!input)
> +		return -ENOMEM;
> +
> +	input->keycodemax = iqs62x_keys->keycodemax;
> +	input->keycode = iqs62x_keys->keycode;
> +	input->keycodesize = sizeof(*iqs62x_keys->keycode);
> +
> +	input->name = iqs62x->dev_desc->dev_name;
> +	input->id.bustype = BUS_I2C;
> +
> +	__set_bit(EV_KEY, input->evbit);
> +
> +	for (i = 0; i < iqs62x_keys->keycodemax; i++)
> +		__set_bit(iqs62x_keys->keycode[i], input->keybit);
> +
> +	__clear_bit(KEY_RESERVED, input->keybit);
> +
> +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> +		if (iqs62x_keys->switches[i].enabled) {
> +			__set_bit(EV_SW, input->evbit);
> +			__set_bit(iqs62x_keys->switches[i].code, input->swbit);

input_set_capability(input, EV_SW, iqs62x_keys->switches[i].code)

> +		}
> +
> +	iqs62x_keys->iqs62x = iqs62x;
> +	iqs62x_keys->input = input;
> +
> +	ret = iqs62x_keys_init(iqs62x_keys);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to initialize device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = input_register_device(iqs62x_keys->input);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to register device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
> +	ret = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
> +					       &iqs62x_keys->notifier);
> +	if (ret)
> +		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static int iqs62x_keys_remove(struct platform_device *pdev)
> +{
> +	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
> +	int ret;
> +
> +	ret = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
> +						 &iqs62x_keys->notifier);
> +	if (ret)
> +		dev_err(&pdev->dev, "Failed to unregister notifier: %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static struct platform_driver iqs62x_keys_platform_driver = {
> +	.driver = {
> +		.name = IQS62X_DRV_NAME_KEYS,
> +	},
> +	.probe = iqs62x_keys_probe,
> +	.remove = iqs62x_keys_remove,
> +};
> +module_platform_driver(iqs62x_keys_platform_driver);
> +
> +MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
> +MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Keys and Switches");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" IQS62X_DRV_NAME_KEYS);

Otherwise

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

I suppose it will be merged through MFD?

Thanks.
Jeff LaBundy Jan. 19, 2020, 10:40 p.m. UTC | #2
Hi Dmitry,

Thank you for your continued support on this project.

On Fri, Jan 17, 2020 at 01:33:30PM -0800, dmitry.torokhov@gmail.com wrote:
> Hi Jeff,
> 
> On Fri, Jan 17, 2020 at 02:35:46AM +0000, Jeff LaBundy wrote:
> > This patch adds key and switch support for the Azoteq IQS620A,
> > IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
> > 
> > Signed-off-by: Jeff LaBundy <jeff@labundy.com>
> > ---
> > Changes in v4:
> >   - None
> > 
> > Changes in v3:
> >   - None
> > 
> > Changes in v2:
> >   - Merged 'Copyright' and 'Author' lines into one in introductory comments
> >   - Replaced 'error' with 'ret' throughout
> >   - Updated iqs62x_keys_parse_prop to use unified device property interface
> >   - Clarified the comment in iqs62x_keys_notifier to state that wheel up or
> >     down events elicit an emulated release cycle
> >   - Eliminated tabbed alignment of platform_driver struct members
> > 
> >  drivers/input/keyboard/Kconfig       |  10 ++
> >  drivers/input/keyboard/Makefile      |   1 +
> >  drivers/input/keyboard/iqs62x-keys.c | 340 +++++++++++++++++++++++++++++++++++
> >  3 files changed, 351 insertions(+)
> >  create mode 100644 drivers/input/keyboard/iqs62x-keys.c
> > 
> > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> > index 4706ff0..28de965 100644
> > --- a/drivers/input/keyboard/Kconfig
> > +++ b/drivers/input/keyboard/Kconfig
> > @@ -663,6 +663,16 @@ config KEYBOARD_IPAQ_MICRO
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called ipaq-micro-keys.
> > 
> > +config KEYBOARD_IQS62X
> > +	tristate "Azoteq IQS620A/621/622/624/625 keys and switches"
> > +	depends on MFD_IQS62X
> > +	help
> > +	  Say Y here to enable key and switch support for the Azoteq IQS620A,
> > +	  IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
> > +
> > +	  To compile this driver as a module, choose M here: the module will
> > +	  be called iqs62x-keys.
> > +
> >  config KEYBOARD_OMAP
> >  	tristate "TI OMAP keypad support"
> >  	depends on ARCH_OMAP1
> > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> > index f5b1752..1d689fd 100644
> > --- a/drivers/input/keyboard/Makefile
> > +++ b/drivers/input/keyboard/Makefile
> > @@ -28,6 +28,7 @@ obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
> >  obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
> >  obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
> >  obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
> > +obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
> >  obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
> >  obj-$(CONFIG_KEYBOARD_IMX_SC_KEY)	+= imx_sc_key.o
> >  obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
> > diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
> > new file mode 100644
> > index 0000000..b477334
> > --- /dev/null
> > +++ b/drivers/input/keyboard/iqs62x-keys.c
> > @@ -0,0 +1,340 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Azoteq IQS620A/621/622/624/625 Keys and Switches
> > + *
> > + * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/input.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/iqs62x.h>
> > +#include <linux/module.h>
> > +#include <linux/notifier.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/property.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +
> > +enum {
> > +	IQS62X_SW_HALL_N,
> > +	IQS62X_SW_HALL_S,
> > +};
> > +
> > +static const char * const iqs62x_switch_names[] = {
> > +	[IQS62X_SW_HALL_N] = "hall-switch-north",
> > +	[IQS62X_SW_HALL_S] = "hall-switch-south",
> > +};
> > +
> > +struct iqs62x_switch_desc {
> > +	enum iqs62x_event_flag flag;
> > +	unsigned int code;
> > +	bool enabled;
> > +};
> > +
> > +struct iqs62x_keys_private {
> > +	struct iqs62x_core *iqs62x;
> > +	struct input_dev *input;
> > +	struct notifier_block notifier;
> > +	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
> > +	unsigned int keycode[IQS62X_NUM_KEYS];
> > +	unsigned int keycodemax;
> > +	u8 interval;
> > +};
> > +
> > +static int iqs62x_keys_parse_prop(struct platform_device *pdev,
> > +				  struct iqs62x_keys_private *iqs62x_keys)
> > +{
> > +	struct fwnode_handle *child;
> > +	unsigned int val;
> > +	int ret, i;
> > +
> > +	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
> > +					     NULL, 0);
> 
> You can use device_property_count_u32().

Sure thing, will do.

> 
> > +	if (ret > IQS62X_NUM_KEYS) {
> > +		dev_err(&pdev->dev, "Too many keycodes present\n");
> > +		return -EINVAL;
> > +	} else if (ret < 0) {
> > +		dev_err(&pdev->dev, "Failed to count keycodes: %d\n", ret);
> > +		return ret;
> > +	}
> > +	iqs62x_keys->keycodemax = ret;
> > +
> > +	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
> > +					     iqs62x_keys->keycode,
> > +					     iqs62x_keys->keycodemax);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
> > +		return ret;
> > +	}
> 
> I wonder why you can't simply use
> 
> 	error = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
> 						iqs62x_keys->keycode,
> 						IQS62X_NUM_KEYS);
> 
> Are you concerned with someone trying to set up keys that are not
> actually exposed later via EVOCSKEYCODES and that is why you are
> limiting keycodemax?

When I try this, I find that device_property_read_u32_array returns -EOVERFLOW
for arrays with fewer than IQS62X_NUM_KEYS elements. To avoid forcing users to
pad the array all the way out to IQS62X_NUM_KEYS in the case of simple channel
assignments (like those in the example bindings), keycodemax must be passed to
device_property_read_u32_array which means it must be limited before-hand. The
same method seems to be used in other drivers as well (e.g. mpr121_touchkey).

> 
> > +
> > +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> > +		child = device_get_named_child_node(&pdev->dev,
> > +						    iqs62x_switch_names[i]);
> > +		if (!child)
> > +			continue;
> > +
> > +		ret = fwnode_property_read_u32(child, "linux,code", &val);
> > +		if (ret) {
> > +			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
> > +				ret);
> > +			return ret;
> > +		}
> > +		iqs62x_keys->switches[i].code = val;
> > +		iqs62x_keys->switches[i].enabled = true;
> > +
> > +		if (fwnode_property_present(child, "azoteq,use-prox"))
> > +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> > +							 IQS62X_EVENT_HALL_N_P :
> > +							 IQS62X_EVENT_HALL_S_P);
> > +		else
> > +			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
> > +							 IQS62X_EVENT_HALL_N_T :
> > +							 IQS62X_EVENT_HALL_S_T);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
> > +{
> > +	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
> > +	enum iqs62x_event_flag flag;
> > +	unsigned int event_mask_reg;
> > +	unsigned int event_mask = 0;
> > +	unsigned int val;
> > +	int ret, i;
> > +
> > +	switch (iqs62x->dev_desc->prod_num) {
> > +	case IQS620_PROD_NUM:
> > +	case IQS621_PROD_NUM:
> > +	case IQS622_PROD_NUM:
> > +		event_mask_reg = IQS620_GLBL_EVENT_MASK;
> > +
> > +		/*
> > +		 * Discreet button, hysteresis and SAR UI flags represent keys
> > +		 * and are unmasked if mapped to a valid keycode.
> > +		 */
> > +		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> > +			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
> > +				continue;
> > +
> > +			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
> > +				event_mask |= iqs62x->dev_desc->prox_mask;
> > +			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
> > +				event_mask |= (iqs62x->dev_desc->hyst_mask |
> > +					       iqs62x->dev_desc->sar_mask);
> > +		}
> > +
> > +		ret = regmap_read(iqs62x->map, iqs62x->dev_desc->hall_flags,
> > +				  &val);
> > +		if (ret)
> > +			return ret;
> > +
> > +		/*
> > +		 * Hall UI flags represent switches and are unmasked if their
> > +		 * corresponding child nodes are present.
> > +		 */
> > +		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
> > +			if (!(iqs62x_keys->switches[i].enabled))
> > +				continue;
> > +
> > +			flag = iqs62x_keys->switches[i].flag;
> > +
> > +			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
> > +				continue;
> > +
> > +			event_mask |= iqs62x->dev_desc->hall_mask;
> > +
> > +			input_report_switch(iqs62x_keys->input,
> > +					    iqs62x_keys->switches[i].code,
> > +					    (val & iqs62x_events[flag].mask) ==
> > +					    iqs62x_events[flag].val);
> > +		}
> > +
> > +		input_sync(iqs62x_keys->input);
> > +		break;
> > +
> > +	case IQS624_PROD_NUM:
> > +		event_mask_reg = IQS624_HALL_UI;
> > +
> > +		/*
> > +		 * Interval change events represent keys and are unmasked if
> > +		 * either wheel movement flag is mapped to a valid keycode.
> > +		 */
> > +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
> > +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> > +
> > +		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
> > +			event_mask |= IQS624_HALL_UI_INT_EVENT;
> > +
> > +		ret = regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
> > +				  &val);
> > +		if (ret)
> > +			return ret;
> > +
> > +		iqs62x_keys->interval = val;
> > +		break;
> > +
> > +	default:
> > +		return 0;
> > +	}
> > +
> > +	return regmap_update_bits(iqs62x->map, event_mask_reg, event_mask, 0);
> > +}
> > +
> > +static int iqs62x_keys_notifier(struct notifier_block *notifier,
> > +				unsigned long event_flags, void *context)
> > +{
> > +	struct iqs62x_event_data *event_data = context;
> > +	struct iqs62x_keys_private *iqs62x_keys;
> > +	int ret, i;
> > +
> > +	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
> > +				   notifier);
> > +
> > +	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
> > +		ret = iqs62x_keys_init(iqs62x_keys);
> > +		if (ret) {
> > +			dev_err(iqs62x_keys->input->dev.parent,
> > +				"Failed to re-initialize device: %d\n", ret);
> > +			return NOTIFY_BAD;
> > +		}
> > +
> > +		return NOTIFY_OK;
> > +	}
> > +
> > +	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
> > +		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
> > +		    event_data->interval == iqs62x_keys->interval)
> > +			continue;
> > +
> > +		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
> > +				 event_flags & BIT(i));
> > +	}
> > +
> > +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> > +		if (iqs62x_keys->switches[i].enabled)
> > +			input_report_switch(iqs62x_keys->input,
> > +					    iqs62x_keys->switches[i].code,
> > +					    event_flags &
> > +					    BIT(iqs62x_keys->switches[i].flag));
> > +
> > +	input_sync(iqs62x_keys->input);
> > +
> > +	if (event_data->interval == iqs62x_keys->interval)
> > +		return NOTIFY_OK;
> > +
> > +	/*
> > +	 * Each frame contains at most one wheel event (up or down), in which
> > +	 * case a complementary release cycle is emulated.
> > +	 */
> > +	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
> > +		input_report_key(iqs62x_keys->input,
> > +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
> > +				 0);
> > +		input_sync(iqs62x_keys->input);
> > +	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
> > +		input_report_key(iqs62x_keys->input,
> > +				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
> > +				 0);
> > +		input_sync(iqs62x_keys->input);
> > +	}
> > +
> > +	iqs62x_keys->interval = event_data->interval;
> > +
> > +	return NOTIFY_OK;
> > +}
> > +
> > +static int iqs62x_keys_probe(struct platform_device *pdev)
> > +{
> > +	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
> > +	struct iqs62x_keys_private *iqs62x_keys;
> > +	struct input_dev *input;
> > +	int ret, i;
> > +
> > +	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
> > +				   GFP_KERNEL);
> > +	if (!iqs62x_keys)
> > +		return -ENOMEM;
> > +
> > +	platform_set_drvdata(pdev, iqs62x_keys);
> > +
> > +	ret = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
> > +	if (ret)
> > +		return ret;
> > +
> > +	input = devm_input_allocate_device(&pdev->dev);
> > +	if (!input)
> > +		return -ENOMEM;
> > +
> > +	input->keycodemax = iqs62x_keys->keycodemax;
> > +	input->keycode = iqs62x_keys->keycode;
> > +	input->keycodesize = sizeof(*iqs62x_keys->keycode);
> > +
> > +	input->name = iqs62x->dev_desc->dev_name;
> > +	input->id.bustype = BUS_I2C;
> > +
> > +	__set_bit(EV_KEY, input->evbit);
> > +
> > +	for (i = 0; i < iqs62x_keys->keycodemax; i++)
> > +		__set_bit(iqs62x_keys->keycode[i], input->keybit);
> > +
> > +	__clear_bit(KEY_RESERVED, input->keybit);

It occurs to me that we can also collapse the __set_bit ... __clear_bit logic
above into the following:

for (i = 0; i < iqs62x_keys->keycodemax; i++)
	if (iqs62x_keys->keycode[i] != KEY_RESERVED)
		input_set_capability(input, EV_KEY, iqs62x_keys->keycode[i]);

Since this seems straightforward enough, I plan on sneaking it into v5 along
with the change below while keeping your Acked-by. If you have any objection,
please let me know.

> > +
> > +	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
> > +		if (iqs62x_keys->switches[i].enabled) {
> > +			__set_bit(EV_SW, input->evbit);
> > +			__set_bit(iqs62x_keys->switches[i].code, input->swbit);
> 
> input_set_capability(input, EV_SW, iqs62x_keys->switches[i].code)

Sure thing, will do.

> 
> > +		}
> > +
> > +	iqs62x_keys->iqs62x = iqs62x;
> > +	iqs62x_keys->input = input;
> > +
> > +	ret = iqs62x_keys_init(iqs62x_keys);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to initialize device: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = input_register_device(iqs62x_keys->input);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to register device: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
> > +	ret = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
> > +					       &iqs62x_keys->notifier);
> > +	if (ret)
> > +		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
> > +
> > +	return ret;
> > +}
> > +
> > +static int iqs62x_keys_remove(struct platform_device *pdev)
> > +{
> > +	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
> > +	int ret;
> > +
> > +	ret = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
> > +						 &iqs62x_keys->notifier);
> > +	if (ret)
> > +		dev_err(&pdev->dev, "Failed to unregister notifier: %d\n", ret);
> > +
> > +	return ret;
> > +}
> > +
> > +static struct platform_driver iqs62x_keys_platform_driver = {
> > +	.driver = {
> > +		.name = IQS62X_DRV_NAME_KEYS,
> > +	},
> > +	.probe = iqs62x_keys_probe,
> > +	.remove = iqs62x_keys_remove,
> > +};
> > +module_platform_driver(iqs62x_keys_platform_driver);
> > +
> > +MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
> > +MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Keys and Switches");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:" IQS62X_DRV_NAME_KEYS);
> 
> Otherwise
> 
> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> 
> I suppose it will be merged through MFD?

That's the plan; Lee confirmed this would be OK once the series is ready. Just
as a heads up, I expect minor changes to this and other patches as iqs62x.h is
hardened (e.g. "iqs62x->map" --> "iqs62x->regmap"). I assume you're OK with me
keeping your Acked-by unless there are major changes, but let me know if you'd
prefer I didn't.

> 
> Thanks.
> 
> -- 
> Dmitry

Kind regards,
Jeff LaBundy
Dmitry Torokhov Jan. 21, 2020, 6:55 a.m. UTC | #3
On Sun, Jan 19, 2020 at 10:40:31PM +0000, Jeff LaBundy wrote:
> On Fri, Jan 17, 2020 at 01:33:30PM -0800, dmitry.torokhov@gmail.com wrote:
> > On Fri, Jan 17, 2020 at 02:35:46AM +0000, Jeff LaBundy wrote:
> > > +
> > > +	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
> > > +					     iqs62x_keys->keycode,
> > > +					     iqs62x_keys->keycodemax);
> > > +	if (ret) {
> > > +		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
> > > +		return ret;
> > > +	}
> > 
> > I wonder why you can't simply use
> > 
> > 	error = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
> > 						iqs62x_keys->keycode,
> > 						IQS62X_NUM_KEYS);
> > 
> > Are you concerned with someone trying to set up keys that are not
> > actually exposed later via EVOCSKEYCODES and that is why you are
> > limiting keycodemax?
> 
> When I try this, I find that device_property_read_u32_array returns -EOVERFLOW
> for arrays with fewer than IQS62X_NUM_KEYS elements. To avoid forcing users to
> pad the array all the way out to IQS62X_NUM_KEYS in the case of simple channel
> assignments (like those in the example bindings), keycodemax must be passed to
> device_property_read_u32_array which means it must be limited before-hand. The
> same method seems to be used in other drivers as well (e.g. mpr121_touchkey).

Ah, indeed, ignore me here please.

...

> > > +MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
> > > +MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Keys and Switches");
> > > +MODULE_LICENSE("GPL");
> > > +MODULE_ALIAS("platform:" IQS62X_DRV_NAME_KEYS);
> > 
> > Otherwise
> > 
> > Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > 
> > I suppose it will be merged through MFD?
> 
> That's the plan; Lee confirmed this would be OK once the series is ready. Just
> as a heads up, I expect minor changes to this and other patches as iqs62x.h is
> hardened (e.g. "iqs62x->map" --> "iqs62x->regmap"). I assume you're OK with me
> keeping your Acked-by unless there are major changes, but let me know if you'd
> prefer I didn't.

Yes, please keep Acked-by unless there is significant rework.

Thanks.
diff mbox series

Patch

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4706ff0..28de965 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -663,6 +663,16 @@  config KEYBOARD_IPAQ_MICRO
 	  To compile this driver as a module, choose M here: the
 	  module will be called ipaq-micro-keys.

+config KEYBOARD_IQS62X
+	tristate "Azoteq IQS620A/621/622/624/625 keys and switches"
+	depends on MFD_IQS62X
+	help
+	  Say Y here to enable key and switch support for the Azoteq IQS620A,
+	  IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called iqs62x-keys.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on ARCH_OMAP1
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index f5b1752..1d689fd 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
+obj-$(CONFIG_KEYBOARD_IQS62X)		+= iqs62x-keys.o
 obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
 obj-$(CONFIG_KEYBOARD_IMX_SC_KEY)	+= imx_sc_key.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c
new file mode 100644
index 0000000..b477334
--- /dev/null
+++ b/drivers/input/keyboard/iqs62x-keys.c
@@ -0,0 +1,340 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620A/621/622/624/625 Keys and Switches
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+enum {
+	IQS62X_SW_HALL_N,
+	IQS62X_SW_HALL_S,
+};
+
+static const char * const iqs62x_switch_names[] = {
+	[IQS62X_SW_HALL_N] = "hall-switch-north",
+	[IQS62X_SW_HALL_S] = "hall-switch-south",
+};
+
+struct iqs62x_switch_desc {
+	enum iqs62x_event_flag flag;
+	unsigned int code;
+	bool enabled;
+};
+
+struct iqs62x_keys_private {
+	struct iqs62x_core *iqs62x;
+	struct input_dev *input;
+	struct notifier_block notifier;
+	struct iqs62x_switch_desc switches[ARRAY_SIZE(iqs62x_switch_names)];
+	unsigned int keycode[IQS62X_NUM_KEYS];
+	unsigned int keycodemax;
+	u8 interval;
+};
+
+static int iqs62x_keys_parse_prop(struct platform_device *pdev,
+				  struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct fwnode_handle *child;
+	unsigned int val;
+	int ret, i;
+
+	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
+					     NULL, 0);
+	if (ret > IQS62X_NUM_KEYS) {
+		dev_err(&pdev->dev, "Too many keycodes present\n");
+		return -EINVAL;
+	} else if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to count keycodes: %d\n", ret);
+		return ret;
+	}
+	iqs62x_keys->keycodemax = ret;
+
+	ret = device_property_read_u32_array(&pdev->dev, "linux,keycodes",
+					     iqs62x_keys->keycode,
+					     iqs62x_keys->keycodemax);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to read keycodes: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+		child = device_get_named_child_node(&pdev->dev,
+						    iqs62x_switch_names[i]);
+		if (!child)
+			continue;
+
+		ret = fwnode_property_read_u32(child, "linux,code", &val);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to read switch code: %d\n",
+				ret);
+			return ret;
+		}
+		iqs62x_keys->switches[i].code = val;
+		iqs62x_keys->switches[i].enabled = true;
+
+		if (fwnode_property_present(child, "azoteq,use-prox"))
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_P :
+							 IQS62X_EVENT_HALL_S_P);
+		else
+			iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ?
+							 IQS62X_EVENT_HALL_N_T :
+							 IQS62X_EVENT_HALL_S_T);
+	}
+
+	return 0;
+}
+
+static int iqs62x_keys_init(struct iqs62x_keys_private *iqs62x_keys)
+{
+	struct iqs62x_core *iqs62x = iqs62x_keys->iqs62x;
+	enum iqs62x_event_flag flag;
+	unsigned int event_mask_reg;
+	unsigned int event_mask = 0;
+	unsigned int val;
+	int ret, i;
+
+	switch (iqs62x->dev_desc->prod_num) {
+	case IQS620_PROD_NUM:
+	case IQS621_PROD_NUM:
+	case IQS622_PROD_NUM:
+		event_mask_reg = IQS620_GLBL_EVENT_MASK;
+
+		/*
+		 * Discreet button, hysteresis and SAR UI flags represent keys
+		 * and are unmasked if mapped to a valid keycode.
+		 */
+		for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+			if (iqs62x_keys->keycode[i] == KEY_RESERVED)
+				continue;
+
+			if (iqs62x_events[i].reg == IQS62X_EVENT_PROX)
+				event_mask |= iqs62x->dev_desc->prox_mask;
+			else if (iqs62x_events[i].reg == IQS62X_EVENT_HYST)
+				event_mask |= (iqs62x->dev_desc->hyst_mask |
+					       iqs62x->dev_desc->sar_mask);
+		}
+
+		ret = regmap_read(iqs62x->map, iqs62x->dev_desc->hall_flags,
+				  &val);
+		if (ret)
+			return ret;
+
+		/*
+		 * Hall UI flags represent switches and are unmasked if their
+		 * corresponding child nodes are present.
+		 */
+		for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) {
+			if (!(iqs62x_keys->switches[i].enabled))
+				continue;
+
+			flag = iqs62x_keys->switches[i].flag;
+
+			if (iqs62x_events[flag].reg != IQS62X_EVENT_HALL)
+				continue;
+
+			event_mask |= iqs62x->dev_desc->hall_mask;
+
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    (val & iqs62x_events[flag].mask) ==
+					    iqs62x_events[flag].val);
+		}
+
+		input_sync(iqs62x_keys->input);
+		break;
+
+	case IQS624_PROD_NUM:
+		event_mask_reg = IQS624_HALL_UI;
+
+		/*
+		 * Interval change events represent keys and are unmasked if
+		 * either wheel movement flag is mapped to a valid keycode.
+		 */
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		if (iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN] != KEY_RESERVED)
+			event_mask |= IQS624_HALL_UI_INT_EVENT;
+
+		ret = regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
+				  &val);
+		if (ret)
+			return ret;
+
+		iqs62x_keys->interval = val;
+		break;
+
+	default:
+		return 0;
+	}
+
+	return regmap_update_bits(iqs62x->map, event_mask_reg, event_mask, 0);
+}
+
+static int iqs62x_keys_notifier(struct notifier_block *notifier,
+				unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs62x_keys_private *iqs62x_keys;
+	int ret, i;
+
+	iqs62x_keys = container_of(notifier, struct iqs62x_keys_private,
+				   notifier);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		ret = iqs62x_keys_init(iqs62x_keys);
+		if (ret) {
+			dev_err(iqs62x_keys->input->dev.parent,
+				"Failed to re-initialize device: %d\n", ret);
+			return NOTIFY_BAD;
+		}
+
+		return NOTIFY_OK;
+	}
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++) {
+		if (iqs62x_events[i].reg == IQS62X_EVENT_WHEEL &&
+		    event_data->interval == iqs62x_keys->interval)
+			continue;
+
+		input_report_key(iqs62x_keys->input, iqs62x_keys->keycode[i],
+				 event_flags & BIT(i));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled)
+			input_report_switch(iqs62x_keys->input,
+					    iqs62x_keys->switches[i].code,
+					    event_flags &
+					    BIT(iqs62x_keys->switches[i].flag));
+
+	input_sync(iqs62x_keys->input);
+
+	if (event_data->interval == iqs62x_keys->interval)
+		return NOTIFY_OK;
+
+	/*
+	 * Each frame contains at most one wheel event (up or down), in which
+	 * case a complementary release cycle is emulated.
+	 */
+	if (event_flags & BIT(IQS62X_EVENT_WHEEL_UP)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_UP],
+				 0);
+		input_sync(iqs62x_keys->input);
+	} else if (event_flags & BIT(IQS62X_EVENT_WHEEL_DN)) {
+		input_report_key(iqs62x_keys->input,
+				 iqs62x_keys->keycode[IQS62X_EVENT_WHEEL_DN],
+				 0);
+		input_sync(iqs62x_keys->input);
+	}
+
+	iqs62x_keys->interval = event_data->interval;
+
+	return NOTIFY_OK;
+}
+
+static int iqs62x_keys_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs62x_keys_private *iqs62x_keys;
+	struct input_dev *input;
+	int ret, i;
+
+	iqs62x_keys = devm_kzalloc(&pdev->dev, sizeof(*iqs62x_keys),
+				   GFP_KERNEL);
+	if (!iqs62x_keys)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, iqs62x_keys);
+
+	ret = iqs62x_keys_parse_prop(pdev, iqs62x_keys);
+	if (ret)
+		return ret;
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->keycodemax = iqs62x_keys->keycodemax;
+	input->keycode = iqs62x_keys->keycode;
+	input->keycodesize = sizeof(*iqs62x_keys->keycode);
+
+	input->name = iqs62x->dev_desc->dev_name;
+	input->id.bustype = BUS_I2C;
+
+	__set_bit(EV_KEY, input->evbit);
+
+	for (i = 0; i < iqs62x_keys->keycodemax; i++)
+		__set_bit(iqs62x_keys->keycode[i], input->keybit);
+
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++)
+		if (iqs62x_keys->switches[i].enabled) {
+			__set_bit(EV_SW, input->evbit);
+			__set_bit(iqs62x_keys->switches[i].code, input->swbit);
+		}
+
+	iqs62x_keys->iqs62x = iqs62x;
+	iqs62x_keys->input = input;
+
+	ret = iqs62x_keys_init(iqs62x_keys);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize device: %d\n", ret);
+		return ret;
+	}
+
+	ret = input_register_device(iqs62x_keys->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register device: %d\n", ret);
+		return ret;
+	}
+
+	iqs62x_keys->notifier.notifier_call = iqs62x_keys_notifier;
+	ret = blocking_notifier_chain_register(&iqs62x_keys->iqs62x->nh,
+					       &iqs62x_keys->notifier);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+
+	return ret;
+}
+
+static int iqs62x_keys_remove(struct platform_device *pdev)
+{
+	struct iqs62x_keys_private *iqs62x_keys = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs62x_keys->iqs62x->nh,
+						 &iqs62x_keys->notifier);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to unregister notifier: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver iqs62x_keys_platform_driver = {
+	.driver = {
+		.name = IQS62X_DRV_NAME_KEYS,
+	},
+	.probe = iqs62x_keys_probe,
+	.remove = iqs62x_keys_remove,
+};
+module_platform_driver(iqs62x_keys_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620A/621/622/624/625 Keys and Switches");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" IQS62X_DRV_NAME_KEYS);