| Message ID | 048190779ef056f407e812f85e955b6eecdf6cef.1579553817.git.jsarha@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/tidss: New driver for TI Keystone platform Display SubSystem | expand |
Hi Jyri. dt_binding_check gives following warning: CHECK Documentation/devicetree/bindings/display/ti/ti,k2g-dss.example.dt.yaml Documentation/devicetree/bindings/display/ti/ti,k2g-dss.example.dt.yaml: dss@02540000: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Documentation/devicetree/bindings/display/ti/ti,k2g-dss.example.dt.yaml: dss@02540000: 'port' is a required property The ports definition in the yaml file does not looks like what you have in the other yaml files. The rest was fine - not other warnings in my build testing. When you have the above warning fixed then I suggest you apply the driver to drm-misc-next. And then handle eventual updates in-tree. If you lack commit-access I can commit the driver, but you should apply for commit access theni, allowing you to maintain the driver in the future. Sam On Mon, Jan 20, 2020 at 11:02:20PM +0200, Jyri Sarha wrote: > Add dt-schema yaml bindig for K2G DSS, an ultra-light version of TI > Keystone Display SubSystem. > > Version history: > > v2: no change > > v3: - Add ports node > - Add includes to dts example > - reindent dts example > > v4: - Add descriptions to reg and clocks properties > - Remove minItems when its value is the same as maxItems value > - Remove ports node > > v5: - itemize reg and clocks properties' descriptions > > v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and > Benoit Parrot <bparrot@ti.com> > > v7: no change > > v8: no change > > Signed-off-by: Jyri Sarha <jsarha@ti.com> > Reviewed-by: Rob Herring <robh@kernel.org> > Reviewed-by: Benoit Parrot <bparrot@ti.com> > --- > .../bindings/display/ti/ti,k2g-dss.yaml | 109 ++++++++++++++++++ > 1 file changed, 109 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml > > diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml > new file mode 100644 > index 000000000000..532bb4794968 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml > @@ -0,0 +1,109 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2019 Texas Instruments Incorporated > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Texas Instruments K2G Display Subsystem > + > +maintainers: > + - Jyri Sarha <jsarha@ti.com> > + - Tomi Valkeinen <tomi.valkeinen@ti.com> > + > +description: | > + The K2G DSS is an ultra-light version of TI Keystone Display > + SubSystem. It has only one output port and video plane. The > + output is DPI. > + > +properties: > + compatible: > + const: ti,k2g-dss > + > + reg: > + items: > + - description: cfg DSS top level > + - description: common DISPC common > + - description: VID1 video plane 1 > + - description: OVR1 overlay manager for vp1 > + - description: VP1 video port 1 > + > + reg-names: > + items: > + - const: cfg > + - const: common > + - const: vid1 > + - const: ovr1 > + - const: vp1 > + > + clocks: > + items: > + - description: fck DSS functional clock > + - description: vp1 Video Port 1 pixel clock > + > + clock-names: > + items: > + - const: fck > + - const: vp1 > + > + interrupts: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + description: phandle to the associated power domain > + > + port: > + type: object > + description: > + Port as described in Documentation/devictree/bindings/graph.txt. > + The DSS DPI output port node > + > + max-memory-bandwidth: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Input memory (from main memory to dispc) bandwidth limit in > + bytes per second > + > +required: > + - compatible > + - reg > + - reg-names > + - clocks > + - clock-names > + - interrupts > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + dss: dss@02540000 { > + compatible = "ti,k2g-dss"; > + reg = <0x02540000 0x400>, > + <0x02550000 0x1000>, > + <0x02557000 0x1000>, > + <0x0255a800 0x100>, > + <0x0255ac00 0x100>; > + reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; > + clocks = <&k2g_clks 0x2 0>, > + <&k2g_clks 0x2 1>; > + clock-names = "fck", "vp1"; > + interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>; > + > + power-domains = <&k2g_pds 0x2>; > + > + max-memory-bandwidth = <230000000>; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + dpi_out: endpoint { > + remote-endpoint = <&sii9022_in>; > + }; > + }; > + }; > + }; > -- > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml new file mode 100644 index 000000000000..532bb4794968 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments K2G Display Subsystem + +maintainers: + - Jyri Sarha <jsarha@ti.com> + - Tomi Valkeinen <tomi.valkeinen@ti.com> + +description: | + The K2G DSS is an ultra-light version of TI Keystone Display + SubSystem. It has only one output port and video plane. The + output is DPI. + +properties: + compatible: + const: ti,k2g-dss + + reg: + items: + - description: cfg DSS top level + - description: common DISPC common + - description: VID1 video plane 1 + - description: OVR1 overlay manager for vp1 + - description: VP1 video port 1 + + reg-names: + items: + - const: cfg + - const: common + - const: vid1 + - const: ovr1 + - const: vp1 + + clocks: + items: + - description: fck DSS functional clock + - description: vp1 Video Port 1 pixel clock + + clock-names: + items: + - const: fck + - const: vp1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + port: + type: object + description: + Port as described in Documentation/devictree/bindings/graph.txt. + The DSS DPI output port node + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Input memory (from main memory to dispc) bandwidth limit in + bytes per second + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + dss: dss@02540000 { + compatible = "ti,k2g-dss"; + reg = <0x02540000 0x400>, + <0x02550000 0x1000>, + <0x02557000 0x1000>, + <0x0255a800 0x100>, + <0x0255ac00 0x100>; + reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; + clocks = <&k2g_clks 0x2 0>, + <&k2g_clks 0x2 1>; + clock-names = "fck", "vp1"; + interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>; + + power-domains = <&k2g_pds 0x2>; + + max-memory-bandwidth = <230000000>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + dpi_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; + }; + };
Add dt-schema yaml bindig for K2G DSS, an ultra-light version of TI Keystone Display SubSystem. Version history: v2: no change v3: - Add ports node - Add includes to dts example - reindent dts example v4: - Add descriptions to reg and clocks properties - Remove minItems when its value is the same as maxItems value - Remove ports node v5: - itemize reg and clocks properties' descriptions v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and Benoit Parrot <bparrot@ti.com> v7: no change v8: no change Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Benoit Parrot <bparrot@ti.com> --- .../bindings/display/ti/ti,k2g-dss.yaml | 109 ++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml