| Message ID | 20191218143416.v3.2.Id445d0057bedcb0a190009e0706e9254c2fd48eb@changeid (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 2f8fcc7794c147fbb6c0b0e2e4d65876034ff874 |
| Headers | show |
| Series | drm/bridge: ti-sn65dsi86: Improve support for AUO B116XAK01 + other DP | expand |
On Wed 18 Dec 14:35 PST 2019, Douglas Anderson wrote: > When we iterate over ti_sn_bridge_dp_rate_lut, there's no reason to > start at index 0 which always contains the value 0. 0 is not a valid > link rate. > > This change should have no real effect but is a small cleanup. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > Tested-by: Rob Clark <robdclark@gmail.com> > Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > Changes in v3: None > Changes in v2: None > > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c > index 2fb9370a76e6..7b596af265e4 100644 > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c > @@ -458,7 +458,7 @@ static void ti_sn_bridge_set_dp_rate(struct ti_sn_bridge *pdata) > /* set DP data rate */ > dp_rate_mhz = ((bit_rate_mhz / pdata->dsi->lanes) * DP_CLK_FUDGE_NUM) / > DP_CLK_FUDGE_DEN; > - for (i = 0; i < ARRAY_SIZE(ti_sn_bridge_dp_rate_lut) - 1; i++) > + for (i = 1; i < ARRAY_SIZE(ti_sn_bridge_dp_rate_lut) - 1; i++) > if (ti_sn_bridge_dp_rate_lut[i] > dp_rate_mhz) > break; > > -- > 2.24.1.735.g03f4e72817-goog >
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 2fb9370a76e6..7b596af265e4 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -458,7 +458,7 @@ static void ti_sn_bridge_set_dp_rate(struct ti_sn_bridge *pdata) /* set DP data rate */ dp_rate_mhz = ((bit_rate_mhz / pdata->dsi->lanes) * DP_CLK_FUDGE_NUM) / DP_CLK_FUDGE_DEN; - for (i = 0; i < ARRAY_SIZE(ti_sn_bridge_dp_rate_lut) - 1; i++) + for (i = 1; i < ARRAY_SIZE(ti_sn_bridge_dp_rate_lut) - 1; i++) if (ti_sn_bridge_dp_rate_lut[i] > dp_rate_mhz) break;