| Message ID | 1580305919-30946-8-git-send-email-sanm@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add QUSB2 PHY support for SC7180 | expand |
On Wed, Jan 29, 2020 at 07:21:58PM +0530, Sandeep Maheswaram wrote: > Use generic QUSB2 V2 Phy configuration for sdm845. > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index d42302b..317347a 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -2387,7 +2387,7 @@ > }; > > usb_1_hsphy: phy@88e2000 { > - compatible = "qcom,sdm845-qusb2-phy"; > + compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; > reg = <0 0x088e2000 0 0x400>; > status = "disabled"; > #phy-cells = <0>; > @@ -2402,7 +2402,7 @@ > }; > > usb_2_hsphy: phy@88e3000 { > - compatible = "qcom,sdm845-qusb2-phy"; > + compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; > reg = <0 0x088e3000 0 0x400>; > status = "disabled"; > #phy-cells = <0>; FWIW Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Quoting Sandeep Maheswaram (2020-01-29 05:51:58) > Use generic QUSB2 V2 Phy configuration for sdm845. > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > --- Reviewed-by: Stephen Boyd <swboyd@chromium.org>
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index d42302b..317347a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2387,7 +2387,7 @@ }; usb_1_hsphy: phy@88e2000 { - compatible = "qcom,sdm845-qusb2-phy"; + compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; reg = <0 0x088e2000 0 0x400>; status = "disabled"; #phy-cells = <0>; @@ -2402,7 +2402,7 @@ }; usb_2_hsphy: phy@88e3000 { - compatible = "qcom,sdm845-qusb2-phy"; + compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; reg = <0 0x088e3000 0 0x400>; status = "disabled"; #phy-cells = <0>;
Use generic QUSB2 V2 Phy configuration for sdm845. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)