Message ID | 20200203150917.176391-2-tmaimon77@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2,1/2] dt-binding: iio: add NPCM ADC reset support | expand |
On Mon, 3 Feb 2020 17:09:17 +0200 Tomer Maimon <tmaimon77@gmail.com> wrote: > Modify NPCM ADC reset support from > direct register access to reset controller support. > > please make sure to modify NPCM adc device tree > parameters as described at nuvoton,npcm-adc.txt > document for using this change. > > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Applied. I added a note for anyone browsing the tree in future to say that we know this is a breaking change, but in this case close ecosystem etc so it's fine.. I don't want others to point at your patch when I tell them no for similar changes in more generic parts! Thanks, Jonathan > --- > drivers/iio/adc/npcm_adc.c | 30 +++++++++--------------------- > 1 file changed, 9 insertions(+), 21 deletions(-) > > diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c > index a6170a37ebe8..83bad2d5575d 100644 > --- a/drivers/iio/adc/npcm_adc.c > +++ b/drivers/iio/adc/npcm_adc.c > @@ -14,6 +14,7 @@ > #include <linux/regulator/consumer.h> > #include <linux/spinlock.h> > #include <linux/uaccess.h> > +#include <linux/reset.h> > > struct npcm_adc { > bool int_status; > @@ -23,13 +24,9 @@ struct npcm_adc { > struct clk *adc_clk; > wait_queue_head_t wq; > struct regulator *vref; > - struct regmap *rst_regmap; > + struct reset_control *reset; > }; > > -/* NPCM7xx reset module */ > -#define NPCM7XX_IPSRST1_OFFSET 0x020 > -#define NPCM7XX_IPSRST1_ADC_RST BIT(27) > - > /* ADC registers */ > #define NPCM_ADCCON 0x00 > #define NPCM_ADCDATA 0x04 > @@ -106,13 +103,11 @@ static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel) > msecs_to_jiffies(10)); > if (ret == 0) { > regtemp = ioread32(info->regs + NPCM_ADCCON); > - if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) { > + if (regtemp & NPCM_ADCCON_ADC_CONV) { > /* if conversion failed - reset ADC module */ > - regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, > - NPCM7XX_IPSRST1_ADC_RST); > + reset_control_assert(info->reset); > msleep(100); > - regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, > - 0x0); > + reset_control_deassert(info->reset); > msleep(100); > > /* Enable ADC and start conversion module */ > @@ -186,7 +181,6 @@ static int npcm_adc_probe(struct platform_device *pdev) > struct npcm_adc *info; > struct iio_dev *indio_dev; > struct device *dev = &pdev->dev; > - struct device_node *np = pdev->dev.of_node; > > indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); > if (!indio_dev) > @@ -199,6 +193,10 @@ static int npcm_adc_probe(struct platform_device *pdev) > if (IS_ERR(info->regs)) > return PTR_ERR(info->regs); > > + info->reset = devm_reset_control_get(&pdev->dev, NULL); > + if (IS_ERR(info->reset)) > + return PTR_ERR(info->reset); > + > info->adc_clk = devm_clk_get(&pdev->dev, NULL); > if (IS_ERR(info->adc_clk)) { > dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); > @@ -211,16 +209,6 @@ static int npcm_adc_probe(struct platform_device *pdev) > div = div >> NPCM_ADCCON_DIV_SHIFT; > info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2); > > - if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) { > - info->rst_regmap = syscon_regmap_lookup_by_compatible > - ("nuvoton,npcm750-rst"); > - if (IS_ERR(info->rst_regmap)) { > - dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n"); > - ret = PTR_ERR(info->rst_regmap); > - goto err_disable_clk; > - } > - } > - > irq = platform_get_irq(pdev, 0); > if (irq <= 0) { > ret = -EINVAL;
diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c index a6170a37ebe8..83bad2d5575d 100644 --- a/drivers/iio/adc/npcm_adc.c +++ b/drivers/iio/adc/npcm_adc.c @@ -14,6 +14,7 @@ #include <linux/regulator/consumer.h> #include <linux/spinlock.h> #include <linux/uaccess.h> +#include <linux/reset.h> struct npcm_adc { bool int_status; @@ -23,13 +24,9 @@ struct npcm_adc { struct clk *adc_clk; wait_queue_head_t wq; struct regulator *vref; - struct regmap *rst_regmap; + struct reset_control *reset; }; -/* NPCM7xx reset module */ -#define NPCM7XX_IPSRST1_OFFSET 0x020 -#define NPCM7XX_IPSRST1_ADC_RST BIT(27) - /* ADC registers */ #define NPCM_ADCCON 0x00 #define NPCM_ADCDATA 0x04 @@ -106,13 +103,11 @@ static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel) msecs_to_jiffies(10)); if (ret == 0) { regtemp = ioread32(info->regs + NPCM_ADCCON); - if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) { + if (regtemp & NPCM_ADCCON_ADC_CONV) { /* if conversion failed - reset ADC module */ - regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, - NPCM7XX_IPSRST1_ADC_RST); + reset_control_assert(info->reset); msleep(100); - regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, - 0x0); + reset_control_deassert(info->reset); msleep(100); /* Enable ADC and start conversion module */ @@ -186,7 +181,6 @@ static int npcm_adc_probe(struct platform_device *pdev) struct npcm_adc *info; struct iio_dev *indio_dev; struct device *dev = &pdev->dev; - struct device_node *np = pdev->dev.of_node; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); if (!indio_dev) @@ -199,6 +193,10 @@ static int npcm_adc_probe(struct platform_device *pdev) if (IS_ERR(info->regs)) return PTR_ERR(info->regs); + info->reset = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(info->reset)) + return PTR_ERR(info->reset); + info->adc_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(info->adc_clk)) { dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); @@ -211,16 +209,6 @@ static int npcm_adc_probe(struct platform_device *pdev) div = div >> NPCM_ADCCON_DIV_SHIFT; info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2); - if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) { - info->rst_regmap = syscon_regmap_lookup_by_compatible - ("nuvoton,npcm750-rst"); - if (IS_ERR(info->rst_regmap)) { - dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n"); - ret = PTR_ERR(info->rst_regmap); - goto err_disable_clk; - } - } - irq = platform_get_irq(pdev, 0); if (irq <= 0) { ret = -EINVAL;
Modify NPCM ADC reset support from direct register access to reset controller support. please make sure to modify NPCM adc device tree parameters as described at nuvoton,npcm-adc.txt document for using this change. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- drivers/iio/adc/npcm_adc.c | 30 +++++++++--------------------- 1 file changed, 9 insertions(+), 21 deletions(-)