| Message ID | 20200205171511.25912-6-alexandru.tachici@analog.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: adc: ad7192: move out of staging | expand |
On Wed, 5 Feb 2020 19:15:11 +0200 Alexandru Tachici <alexandru.tachici@analog.com> wrote: > Move ad7192 ADC driver out of staging into mainline. > > Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Nice. To my eyes only remaining bits are the minor tweaks in earlier patches in this series. If anyone else has time to look at this one that would be great of course! Only 2 more ADC drivers to go in staging after this one :) Thanks, Jonathan > --- > MAINTAINERS | 8 + > drivers/iio/adc/Kconfig | 12 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/ad7192.c | 1043 ++++++++++++++++++++++++++++++ > drivers/staging/iio/adc/Kconfig | 12 - > drivers/staging/iio/adc/Makefile | 1 - > drivers/staging/iio/adc/ad7192.c | 1043 ------------------------------ > 7 files changed, 1064 insertions(+), 1056 deletions(-) > create mode 100644 drivers/iio/adc/ad7192.c > delete mode 100644 drivers/staging/iio/adc/ad7192.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index e699fe378e71..c82bdb31e2fb 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -922,6 +922,14 @@ S: Supported > F: drivers/iio/adc/ad7124.c > F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml > > +ANALOG DEVICES INC AD7192 DRIVER > +M: Alexandru Tachici <alexandru.tachici@analog.com> > +L: linux-iio@vger.kernel.org > +W: http://ez.analog.com/community/linux-device-drivers > +S: Supported > +F: drivers/iio/adc/ad7192.c > +F: Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml > + > ANALOG DEVICES INC AD7292 DRIVER > M: Marcelo Schmitt <marcelo.schmitt1@gmail.com> > L: linux-iio@vger.kernel.org > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 82e33082958c..f4da821c4022 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -39,6 +39,18 @@ config AD7124 > To compile this driver as a module, choose M here: the module will be > called ad7124. > > +config AD7192 > + tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" > + depends on SPI > + select AD_SIGMA_DELTA > + help > + Say yes here to build support for Analog Devices AD7190, > + AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). > + If unsure, say N (but it's safe to say "Y"). > + > + To compile this driver as a module, choose M here: the > + module will be called ad7192. > + > config AD7266 > tristate "Analog Devices AD7265/AD7266 ADC driver" > depends on SPI_MASTER > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index 919228900df9..8462455b4228 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -8,6 +8,7 @@ obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o > obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o > obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o > obj-$(CONFIG_AD7124) += ad7124.o > +obj-$(CONFIG_AD7192) += ad7192.o > obj-$(CONFIG_AD7266) += ad7266.o > obj-$(CONFIG_AD7291) += ad7291.o > obj-$(CONFIG_AD7292) += ad7292.o > diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c > new file mode 100644 > index 000000000000..e75d808a2f41 > --- /dev/null > +++ b/drivers/iio/adc/ad7192.c > @@ -0,0 +1,1043 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * AD7190 AD7192 AD7193 AD7195 SPI ADC driver > + * > + * Copyright 2011-2015 Analog Devices Inc. > + */ > + > +#include <linux/interrupt.h> > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/kernel.h> > +#include <linux/slab.h> > +#include <linux/sysfs.h> > +#include <linux/spi/spi.h> > +#include <linux/regulator/consumer.h> > +#include <linux/err.h> > +#include <linux/sched.h> > +#include <linux/delay.h> > +#include <linux/of_device.h> > + > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > +#include <linux/iio/buffer.h> > +#include <linux/iio/trigger.h> > +#include <linux/iio/trigger_consumer.h> > +#include <linux/iio/triggered_buffer.h> > +#include <linux/iio/adc/ad_sigma_delta.h> > + > +/* Registers */ > +#define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) */ > +#define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) */ > +#define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit */ > +#define AD7192_REG_CONF 2 /* Configuration Register (RW, 24-bit) */ > +#define AD7192_REG_DATA 3 /* Data Register (RO, 24/32-bit) */ > +#define AD7192_REG_ID 4 /* ID Register (RO, 8-bit) */ > +#define AD7192_REG_GPOCON 5 /* GPOCON Register (RO, 8-bit) */ > +#define AD7192_REG_OFFSET 6 /* Offset Register (RW, 16-bit */ > + /* (AD7792)/24-bit (AD7192)) */ > +#define AD7192_REG_FULLSALE 7 /* Full-Scale Register */ > + /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */ > + > +/* Communications Register Bit Designations (AD7192_REG_COMM) */ > +#define AD7192_COMM_WEN BIT(7) /* Write Enable */ > +#define AD7192_COMM_WRITE 0 /* Write Operation */ > +#define AD7192_COMM_READ BIT(6) /* Read Operation */ > +#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ > +#define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data Register */ > + > +/* Status Register Bit Designations (AD7192_REG_STAT) */ > +#define AD7192_STAT_RDY BIT(7) /* Ready */ > +#define AD7192_STAT_ERR BIT(6) /* Error (Overrange, Underrange) */ > +#define AD7192_STAT_NOREF BIT(5) /* Error no external reference */ > +#define AD7192_STAT_PARITY BIT(4) /* Parity */ > +#define AD7192_STAT_CH3 BIT(2) /* Channel 3 */ > +#define AD7192_STAT_CH2 BIT(1) /* Channel 2 */ > +#define AD7192_STAT_CH1 BIT(0) /* Channel 1 */ > + > +/* Mode Register Bit Designations (AD7192_REG_MODE) */ > +#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode Select */ > +#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select Mask */ > +#define AD7192_MODE_DAT_STA BIT(20) /* Status Register transmission */ > +#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ > +#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ > +#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 only)*/ > +#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ > +#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/ > +#define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ > +#define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */ > +#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate Select */ > + > +/* Mode Register: AD7192_MODE_SEL options */ > +#define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ > +#define AD7192_MODE_SINGLE 1 /* Single Conversion Mode */ > +#define AD7192_MODE_IDLE 2 /* Idle Mode */ > +#define AD7192_MODE_PWRDN 3 /* Power-Down Mode */ > +#define AD7192_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ > +#define AD7192_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ > +#define AD7192_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ > +#define AD7192_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ > + > +/* Mode Register: AD7192_MODE_CLKSRC options */ > +#define AD7192_CLK_EXT_MCLK1_2 0 /* External 4.92 MHz Clock connected*/ > + /* from MCLK1 to MCLK2 */ > +#define AD7192_CLK_EXT_MCLK2 1 /* External Clock applied to MCLK2 */ > +#define AD7192_CLK_INT 2 /* Internal 4.92 MHz Clock not */ > + /* available at the MCLK2 pin */ > +#define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock available*/ > + /* at the MCLK2 pin */ > + > +/* Configuration Register Bit Designations (AD7192_REG_CONF) */ > + > +#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ > +#define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ > +#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ > +#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ > +#define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ > +#define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ > +#define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ > +#define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ > +#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ > + > +#define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ > +#define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ > +#define AD7192_CH_TEMP BIT(2) /* Temp Sensor */ > +#define AD7192_CH_AIN2P_AIN2M BIT(3) /* AIN2(+) - AIN2(-) */ > +#define AD7192_CH_AIN1 BIT(4) /* AIN1 - AINCOM */ > +#define AD7192_CH_AIN2 BIT(5) /* AIN2 - AINCOM */ > +#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */ > +#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */ > + > +#define AD7193_CH_AIN1P_AIN2M 0x001 /* AIN1(+) - AIN2(-) */ > +#define AD7193_CH_AIN3P_AIN4M 0x002 /* AIN3(+) - AIN4(-) */ > +#define AD7193_CH_AIN5P_AIN6M 0x004 /* AIN5(+) - AIN6(-) */ > +#define AD7193_CH_AIN7P_AIN8M 0x008 /* AIN7(+) - AIN8(-) */ > +#define AD7193_CH_TEMP 0x100 /* Temp senseor */ > +#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */ > +#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */ > +#define AD7193_CH_AIN2 0x402 /* AIN2 - AINCOM */ > +#define AD7193_CH_AIN3 0x404 /* AIN3 - AINCOM */ > +#define AD7193_CH_AIN4 0x408 /* AIN4 - AINCOM */ > +#define AD7193_CH_AIN5 0x410 /* AIN5 - AINCOM */ > +#define AD7193_CH_AIN6 0x420 /* AIN6 - AINCOM */ > +#define AD7193_CH_AIN7 0x440 /* AIN7 - AINCOM */ > +#define AD7193_CH_AIN8 0x480 /* AIN7 - AINCOM */ > +#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */ > + > +/* ID Register Bit Designations (AD7192_REG_ID) */ > +#define ID_AD7190 0x4 > +#define ID_AD7192 0x0 > +#define ID_AD7193 0x2 > +#define ID_AD7195 0x6 > +#define AD7192_ID_MASK 0x0F > + > +/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ > +#define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch enable */ > +#define AD7192_GPOCON_GP32EN BIT(5) /* Digital Output P3 and P2 enable */ > +#define AD7192_GPOCON_GP10EN BIT(4) /* Digital Output P1 and P0 enable */ > +#define AD7192_GPOCON_P3DAT BIT(3) /* P3 state */ > +#define AD7192_GPOCON_P2DAT BIT(2) /* P2 state */ > +#define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */ > +#define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */ > + > +#define AD7192_EXT_FREQ_MHZ_MIN 2457600 > +#define AD7192_EXT_FREQ_MHZ_MAX 5120000 > +#define AD7192_INT_FREQ_MHZ 4915200 > + > +#define AD7192_NO_SYNC_FILTER 1 > +#define AD7192_SYNC3_FILTER 3 > +#define AD7192_SYNC4_FILTER 4 > + > +/* NOTE: > + * The AD7190/2/5 features a dual use data out ready DOUT/RDY output. > + * In order to avoid contentions on the SPI bus, it's therefore necessary > + * to use spi bus locking. > + * > + * The DOUT/RDY output must also be wired to an interrupt capable GPIO. > + */ > + > +enum { > + AD7192_SYSCALIB_ZERO_SCALE, > + AD7192_SYSCALIB_FULL_SCALE, > +}; > + > +struct ad7192_state { > + struct regulator *avdd; > + struct regulator *dvdd; > + struct clk *mclk; > + u16 int_vref_mv; > + u32 fclk; > + u32 f_order; > + u32 mode; > + u32 conf; > + u32 scale_avail[8][2]; > + u8 gpocon; > + u8 devid; > + u8 clock_sel; > + struct mutex lock; /* protect sensor state */ > + u8 syscalib_mode[8]; > + > + struct ad_sigma_delta sd; > +}; > + > +static const char * const ad7192_syscalib_modes[] = { > + [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale", > + [AD7192_SYSCALIB_FULL_SCALE] = "full_scale", > +}; > + > +static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, > + unsigned int mode) > +{ > + struct ad7192_state *st = iio_priv(indio_dev); > + > + st->syscalib_mode[chan->channel] = mode; > + > + return 0; > +} > + > +static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan) > +{ > + struct ad7192_state *st = iio_priv(indio_dev); > + > + return st->syscalib_mode[chan->channel]; > +} > + > +static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev, > + uintptr_t private, > + const struct iio_chan_spec *chan, > + const char *buf, size_t len) > +{ > + struct ad7192_state *st = iio_priv(indio_dev); > + bool sys_calib; > + int ret, temp; > + > + ret = strtobool(buf, &sys_calib); > + if (ret) > + return ret; > + > + temp = st->syscalib_mode[chan->channel]; > + if (sys_calib) { > + if (temp == AD7192_SYSCALIB_ZERO_SCALE) > + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO, > + chan->address); > + else > + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL, > + chan->address); > + } > + > + return ret ? ret : len; > +} > + > +static const struct iio_enum ad7192_syscalib_mode_enum = { > + .items = ad7192_syscalib_modes, > + .num_items = ARRAY_SIZE(ad7192_syscalib_modes), > + .set = ad7192_set_syscalib_mode, > + .get = ad7192_get_syscalib_mode > +}; > + > +static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = { > + { > + .name = "sys_calibration", > + .write = ad7192_write_syscalib, > + .shared = IIO_SEPARATE, > + }, > + IIO_ENUM("sys_calibration_mode", IIO_SEPARATE, > + &ad7192_syscalib_mode_enum), > + IIO_ENUM_AVAILABLE("sys_calibration_mode", &ad7192_syscalib_mode_enum), > + {} > +}; > + > +static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd) > +{ > + return container_of(sd, struct ad7192_state, sd); > +} > + > +static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel) > +{ > + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); > + > + st->conf &= ~AD7192_CONF_CHAN_MASK; > + st->conf |= AD7192_CONF_CHAN(channel); > + > + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > +} > + > +static int ad7192_set_mode(struct ad_sigma_delta *sd, > + enum ad_sigma_delta_mode mode) > +{ > + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); > + > + st->mode &= ~AD7192_MODE_SEL_MASK; > + st->mode |= AD7192_MODE_SEL(mode); > + > + return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > +} > + > +static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { > + .set_channel = ad7192_set_channel, > + .set_mode = ad7192_set_mode, > + .has_registers = true, > + .addr_shift = 3, > + .read_mask = BIT(6), > +}; > + > +static const struct ad_sd_calib_data ad7192_calib_arr[8] = { > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1}, > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1}, > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2}, > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2}, > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3}, > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3}, > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4}, > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4} > +}; > + > +static int ad7192_calibrate_all(struct ad7192_state *st) > +{ > + return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr, > + ARRAY_SIZE(ad7192_calib_arr)); > +} > + > +static inline bool ad7192_valid_external_frequency(u32 freq) > +{ > + return (freq >= AD7192_EXT_FREQ_MHZ_MIN && > + freq <= AD7192_EXT_FREQ_MHZ_MAX); > +} > + > +static int ad7192_of_clock_select(struct ad7192_state *st) > +{ > + struct device_node *np = st->sd.spi->dev.of_node; > + unsigned int clock_sel; > + > + clock_sel = AD7192_CLK_INT; > + > + /* use internal clock */ > + if (PTR_ERR(st->mclk) == -ENOENT) { > + if (of_property_read_bool(np, "adi,int-clock-output-enable")) > + clock_sel = AD7192_CLK_INT_CO; > + } else { > + if (of_property_read_bool(np, "adi,clock-xtal")) > + clock_sel = AD7192_CLK_EXT_MCLK1_2; > + else > + clock_sel = AD7192_CLK_EXT_MCLK2; > + } > + > + return clock_sel; > +} > + > +static int ad7192_setup(struct ad7192_state *st, struct device_node *np) > +{ > + struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi); > + bool rej60_en, refin2_en; > + bool buf_en, bipolar, burnout_curr_en; > + unsigned long long scale_uv; > + int i, ret, id; > + > + /* reset the serial interface */ > + ret = ad_sd_reset(&st->sd, 48); > + if (ret < 0) > + return ret; > + usleep_range(500, 1000); /* Wait for at least 500us */ > + > + /* write/read test for device presence */ > + ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id); > + if (ret) > + return ret; > + > + id &= AD7192_ID_MASK; > + > + if (id != st->devid) > + dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n", > + id); > + > + st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | > + AD7192_MODE_CLKSRC(st->clock_sel) | > + AD7192_MODE_RATE(480); > + > + st->conf = AD7192_CONF_GAIN(0); > + > + rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); > + if (rej60_en) > + st->mode |= AD7192_MODE_REJ60; > + > + refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable"); > + if (refin2_en && st->devid != ID_AD7195) > + st->conf |= AD7192_CONF_REFSEL; > + > + st->conf &= ~AD7192_CONF_CHOP; > + st->f_order = AD7192_NO_SYNC_FILTER; > + > + buf_en = of_property_read_bool(np, "adi,buffer-enable"); > + if (buf_en) > + st->conf |= AD7192_CONF_BUF; > + > + bipolar = of_property_read_bool(np, "bipolar"); > + if (!bipolar) > + st->conf |= AD7192_CONF_UNIPOLAR; > + > + burnout_curr_en = of_property_read_bool(np, > + "adi,burnout-currents-enable"); > + if (burnout_curr_en && buf_en) { > + st->conf |= AD7192_CONF_BURN; > + } else if (burnout_curr_en) { > + dev_warn(&st->sd.spi->dev, > + "Can't enable burnout currents: see CHOP or buffer\n"); > + } > + > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > + if (ret) > + return ret; > + > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > + if (ret) > + return ret; > + > + ret = ad7192_calibrate_all(st); > + if (ret) > + return ret; > + > + /* Populate available ADC input ranges */ > + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { > + scale_uv = ((u64)st->int_vref_mv * 100000000) > + >> (indio_dev->channels[0].scan_type.realbits - > + ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); > + scale_uv >>= i; > + > + st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; > + st->scale_avail[i][0] = scale_uv; > + } > + > + return 0; > +} > + > +static ssize_t ad7192_show_ac_excitation(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct ad7192_state *st = iio_priv(indio_dev); > + > + return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); > +} > + > +static ssize_t ad7192_show_bridge_switch(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct ad7192_state *st = iio_priv(indio_dev); > + > + return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); > +} > + > +static ssize_t ad7192_set(struct device *dev, > + struct device_attribute *attr, > + const char *buf, > + size_t len) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct ad7192_state *st = iio_priv(indio_dev); > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); > + int ret; > + bool val; > + > + ret = strtobool(buf, &val); > + if (ret < 0) > + return ret; > + > + ret = iio_device_claim_direct_mode(indio_dev); > + if (ret) > + return ret; > + > + switch ((u32)this_attr->address) { > + case AD7192_REG_GPOCON: > + if (val) > + st->gpocon |= AD7192_GPOCON_BPDSW; > + else > + st->gpocon &= ~AD7192_GPOCON_BPDSW; > + > + ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon); > + break; > + case AD7192_REG_MODE: > + if (val) > + st->mode |= AD7192_MODE_ACX; > + else > + st->mode &= ~AD7192_MODE_ACX; > + > + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > + break; > + default: > + ret = -EINVAL; > + } > + > + iio_device_release_direct_mode(indio_dev); > + > + return ret ? ret : len; > +} > + > +static void ad7192_get_available_filter_freq(struct ad7192_state *st, > + int *freq) > +{ > + unsigned int fadc; > + > + /* Formulas for filter at page 25 of the datasheet */ > + fadc = DIV_ROUND_CLOSEST(st->fclk, > + AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode)); > + freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); > + > + fadc = DIV_ROUND_CLOSEST(st->fclk, > + AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode)); > + freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); > + > + fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); > + freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024); > + freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024); > +} > + > +static ssize_t ad7192_show_filter_avail(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > + struct ad7192_state *st = iio_priv(indio_dev); > + unsigned int freq_avail[4], i; > + size_t len = 0; > + > + ad7192_get_available_filter_freq(st, freq_avail); > + > + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) > + len += scnprintf(buf + len, PAGE_SIZE - len, > + "%d.%d ", freq_avail[i] / 1000, > + freq_avail[i] % 1000); > + > + buf[len - 1] = '\n'; > + > + return len; > +} > + > +static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available, > + 0444, ad7192_show_filter_avail, NULL, 0); > + > +static IIO_DEVICE_ATTR(bridge_switch_en, 0644, > + ad7192_show_bridge_switch, ad7192_set, > + AD7192_REG_GPOCON); > + > +static IIO_DEVICE_ATTR(ac_excitation_en, 0644, > + ad7192_show_ac_excitation, ad7192_set, > + AD7192_REG_MODE); > + > +static struct attribute *ad7192_attributes[] = { > + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, > + &iio_dev_attr_bridge_switch_en.dev_attr.attr, > + &iio_dev_attr_ac_excitation_en.dev_attr.attr, > + NULL > +}; > + > +static const struct attribute_group ad7192_attribute_group = { > + .attrs = ad7192_attributes, > +}; > + > +static struct attribute *ad7195_attributes[] = { > + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, > + &iio_dev_attr_bridge_switch_en.dev_attr.attr, > + NULL > +}; > + > +static const struct attribute_group ad7195_attribute_group = { > + .attrs = ad7195_attributes, > +}; > + > +static unsigned int ad7192_get_temp_scale(bool unipolar) > +{ > + return unipolar ? 2815 * 2 : 2815; > +} > + > +static int ad7192_set_3db_filter_freq(struct ad7192_state *st, > + int val, int val2) > +{ > + int freq_avail[4], i, ret, freq; > + unsigned int diff_new, diff_old; > + int idx = 0; > + > + diff_old = U32_MAX; > + freq = val * 1000 + val2; > + > + ad7192_get_available_filter_freq(st, freq_avail); > + > + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) { > + diff_new = abs(freq - freq_avail[i]); > + if (diff_new < diff_old) { > + diff_old = diff_new; > + idx = i; > + } > + } > + > + switch (idx) { > + case 0: > + st->f_order = AD7192_SYNC4_FILTER; > + st->mode &= ~AD7192_MODE_SINC3; > + > + st->conf |= AD7192_CONF_CHOP; > + break; > + case 1: > + st->f_order = AD7192_SYNC3_FILTER; > + st->mode |= AD7192_MODE_SINC3; > + > + st->conf |= AD7192_CONF_CHOP; > + break; > + case 2: > + st->f_order = AD7192_NO_SYNC_FILTER; > + st->mode &= ~AD7192_MODE_SINC3; > + > + st->conf &= ~AD7192_CONF_CHOP; > + break; > + case 3: > + st->f_order = AD7192_NO_SYNC_FILTER; > + st->mode |= AD7192_MODE_SINC3; > + > + st->conf &= ~AD7192_CONF_CHOP; > + break; > + } > + > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > + if (ret < 0) > + return ret; > + > + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > +} > + > +static int ad7192_get_3db_filter_freq(struct ad7192_state *st) > +{ > + unsigned int fadc; > + > + fadc = DIV_ROUND_CLOSEST(st->fclk, > + st->f_order * AD7192_MODE_RATE(st->mode)); > + > + if (st->conf & AD7192_CONF_CHOP) > + return DIV_ROUND_CLOSEST(fadc * 240, 1024); > + if (st->mode & AD7192_MODE_SINC3) > + return DIV_ROUND_CLOSEST(fadc * 272, 1024); > + else > + return DIV_ROUND_CLOSEST(fadc * 230, 1024); > +} > + > +static int ad7192_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, > + int *val2, > + long m) > +{ > + struct ad7192_state *st = iio_priv(indio_dev); > + bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); > + > + switch (m) { > + case IIO_CHAN_INFO_RAW: > + return ad_sigma_delta_single_conversion(indio_dev, chan, val); > + case IIO_CHAN_INFO_SCALE: > + switch (chan->type) { > + case IIO_VOLTAGE: > + mutex_lock(&st->lock); > + *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; > + *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; > + mutex_unlock(&st->lock); > + return IIO_VAL_INT_PLUS_NANO; > + case IIO_TEMP: > + *val = 0; > + *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); > + return IIO_VAL_INT_PLUS_NANO; > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_OFFSET: > + if (!unipolar) > + *val = -(1 << (chan->scan_type.realbits - 1)); > + else > + *val = 0; > + /* Kelvin to Celsius */ > + if (chan->type == IIO_TEMP) > + *val -= 273 * ad7192_get_temp_scale(unipolar); > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SAMP_FREQ: > + *val = st->fclk / > + (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > + *val = ad7192_get_3db_filter_freq(st); > + *val2 = 1000; > + return IIO_VAL_FRACTIONAL; > + } > + > + return -EINVAL; > +} > + > +static int ad7192_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, > + int val2, > + long mask) > +{ > + struct ad7192_state *st = iio_priv(indio_dev); > + int ret, i, div; > + unsigned int tmp; > + > + ret = iio_device_claim_direct_mode(indio_dev); > + if (ret) > + return ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + ret = -EINVAL; > + mutex_lock(&st->lock); > + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) > + if (val2 == st->scale_avail[i][1]) { > + ret = 0; > + tmp = st->conf; > + st->conf &= ~AD7192_CONF_GAIN(-1); > + st->conf |= AD7192_CONF_GAIN(i); > + if (tmp == st->conf) > + break; > + ad_sd_write_reg(&st->sd, AD7192_REG_CONF, > + 3, st->conf); > + ad7192_calibrate_all(st); > + break; > + } > + mutex_unlock(&st->lock); > + break; > + case IIO_CHAN_INFO_SAMP_FREQ: > + if (!val) { > + ret = -EINVAL; > + break; > + } > + > + div = st->fclk / (val * st->f_order * 1024); > + if (div < 1 || div > 1023) { > + ret = -EINVAL; > + break; > + } > + > + st->mode &= ~AD7192_MODE_RATE(-1); > + st->mode |= AD7192_MODE_RATE(div); > + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > + break; > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > + ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000); > + break; > + default: > + ret = -EINVAL; > + } > + > + iio_device_release_direct_mode(indio_dev); > + > + return ret; > +} > + > +static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + long mask) > +{ > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + return IIO_VAL_INT_PLUS_NANO; > + case IIO_CHAN_INFO_SAMP_FREQ: > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > + return IIO_VAL_INT_PLUS_MICRO; > + default: > + return -EINVAL; > + } > +} > + > +static int ad7192_read_avail(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + const int **vals, int *type, int *length, > + long mask) > +{ > + struct ad7192_state *st = iio_priv(indio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + *vals = (int *)st->scale_avail; > + *type = IIO_VAL_INT_PLUS_NANO; > + /* Values are stored in a 2D matrix */ > + *length = ARRAY_SIZE(st->scale_avail) * 2; > + > + return IIO_AVAIL_LIST; > + } > + > + return -EINVAL; > +} > + > +static const struct iio_info ad7192_info = { > + .read_raw = ad7192_read_raw, > + .write_raw = ad7192_write_raw, > + .write_raw_get_fmt = ad7192_write_raw_get_fmt, > + .read_avail = ad7192_read_avail, > + .attrs = &ad7192_attribute_group, > + .validate_trigger = ad_sd_validate_trigger, > +}; > + > +static const struct iio_info ad7195_info = { > + .read_raw = ad7192_read_raw, > + .write_raw = ad7192_write_raw, > + .write_raw_get_fmt = ad7192_write_raw_get_fmt, > + .read_avail = ad7192_read_avail, > + .attrs = &ad7195_attribute_group, > + .validate_trigger = ad_sd_validate_trigger, > +}; > + > +#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \ > + _type, _mask_type_av, _ext_info) \ > + { \ > + .type = (_type), \ > + .differential = ((_channel2) == -1 ? 0 : 1), \ > + .indexed = 1, \ > + .channel = (_channel1), \ > + .channel2 = (_channel2), \ > + .address = (_address), \ > + .extend_name = (_extend_name), \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_OFFSET), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ > + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ > + .info_mask_shared_by_type_available = (_mask_type_av), \ > + .ext_info = (_ext_info), \ > + .scan_index = (_si), \ > + .scan_type = { \ > + .sign = 'u', \ > + .realbits = 24, \ > + .storagebits = 32, \ > + .endianness = IIO_BE, \ > + }, \ > + } > + > +#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ > + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \ > + IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \ > + ad7192_calibsys_ext_info) > + > +#define AD719x_CHANNEL(_si, _channel1, _address) \ > + __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \ > + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) > + > +#define AD719x_SHORTED_CHANNEL(_si, _channel1, _address) \ > + __AD719x_CHANNEL(_si, _channel1, -1, _address, "shorted", IIO_VOLTAGE, \ > + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) > + > +#define AD719x_TEMP_CHANNEL(_si, _address) \ > + __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL) > + > +static const struct iio_chan_spec ad7192_channels[] = { > + AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M), > + AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M), > + AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP), > + AD719x_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M), > + AD719x_CHANNEL(4, 1, AD7192_CH_AIN1), > + AD719x_CHANNEL(5, 2, AD7192_CH_AIN2), > + AD719x_CHANNEL(6, 3, AD7192_CH_AIN3), > + AD719x_CHANNEL(7, 4, AD7192_CH_AIN4), > + IIO_CHAN_SOFT_TIMESTAMP(8), > +}; > + > +static const struct iio_chan_spec ad7193_channels[] = { > + AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), > + AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), > + AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), > + AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), > + AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP), > + AD719x_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M), > + AD719x_CHANNEL(6, 1, AD7193_CH_AIN1), > + AD719x_CHANNEL(7, 2, AD7193_CH_AIN2), > + AD719x_CHANNEL(8, 3, AD7193_CH_AIN3), > + AD719x_CHANNEL(9, 4, AD7193_CH_AIN4), > + AD719x_CHANNEL(10, 5, AD7193_CH_AIN5), > + AD719x_CHANNEL(11, 6, AD7193_CH_AIN6), > + AD719x_CHANNEL(12, 7, AD7193_CH_AIN7), > + AD719x_CHANNEL(13, 8, AD7193_CH_AIN8), > + IIO_CHAN_SOFT_TIMESTAMP(14), > +}; > + > +static int ad7192_channels_config(struct iio_dev *indio_dev) > +{ > + struct ad7192_state *st = iio_priv(indio_dev); > + > + switch (st->devid) { > + case ID_AD7193: > + indio_dev->channels = ad7193_channels; > + indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); > + break; > + default: > + indio_dev->channels = ad7192_channels; > + indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); > + break; > + } > + > + return 0; > +} > + > +static const struct of_device_id ad7192_of_match[]; > + > +static int ad7192_probe(struct spi_device *spi) > +{ > + const struct of_device_id *match; > + struct ad7192_state *st; > + struct iio_dev *indio_dev; > + int ret, voltage_uv = 0; > + > + if (!spi->irq) { > + dev_err(&spi->dev, "no IRQ?\n"); > + return -ENODEV; > + } > + > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); > + if (!indio_dev) > + return -ENOMEM; > + > + st = iio_priv(indio_dev); > + > + mutex_init(&st->lock); > + > + st->avdd = devm_regulator_get(&spi->dev, "avdd"); > + if (IS_ERR(st->avdd)) > + return PTR_ERR(st->avdd); > + > + ret = regulator_enable(st->avdd); > + if (ret) { > + dev_err(&spi->dev, "Failed to enable specified AVdd supply\n"); > + return ret; > + } > + > + st->dvdd = devm_regulator_get(&spi->dev, "dvdd"); > + if (IS_ERR(st->dvdd)) { > + ret = PTR_ERR(st->dvdd); > + goto error_disable_avdd; > + } > + > + ret = regulator_enable(st->dvdd); > + if (ret) { > + dev_err(&spi->dev, "Failed to enable specified DVdd supply\n"); > + goto error_disable_avdd; > + } > + > + voltage_uv = regulator_get_voltage(st->avdd); > + > + if (voltage_uv) { > + st->int_vref_mv = voltage_uv / 1000; > + } else { > + ret = voltage_uv; > + dev_err(&spi->dev, "Device tree error, reference voltage undefined\n"); > + goto error_disable_avdd; > + } > + > + match = of_match_device(ad7192_of_match, &spi->dev); > + if (!match) > + return -EINVAL; > + > + spi_set_drvdata(spi, indio_dev); > + st->devid = (unsigned long)match->data; > + indio_dev->dev.parent = &spi->dev; > + indio_dev->name = spi_get_device_id(spi)->name; > + indio_dev->modes = INDIO_DIRECT_MODE; > + > + ret = ad7192_channels_config(indio_dev); > + if (ret < 0) > + goto error_disable_dvdd; > + > + if (st->devid == ID_AD7195) > + indio_dev->info = &ad7195_info; > + else > + indio_dev->info = &ad7192_info; > + > + ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info); > + > + ret = ad_sd_setup_buffer_and_trigger(indio_dev); > + if (ret) > + goto error_disable_dvdd; > + > + st->fclk = AD7192_INT_FREQ_MHZ; > + > + st->mclk = devm_clk_get(&st->sd.spi->dev, "mclk"); > + if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) { > + ret = PTR_ERR(st->mclk); > + goto error_remove_trigger; > + } > + > + st->clock_sel = ad7192_of_clock_select(st); > + > + if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 || > + st->clock_sel == AD7192_CLK_EXT_MCLK2) { > + ret = clk_prepare_enable(st->mclk); > + if (ret < 0) > + goto error_remove_trigger; > + > + st->fclk = clk_get_rate(st->mclk); > + if (!ad7192_valid_external_frequency(st->fclk)) { > + ret = -EINVAL; > + dev_err(&spi->dev, > + "External clock frequency out of bounds\n"); > + goto error_disable_clk; > + } > + } > + > + ret = ad7192_setup(st, spi->dev.of_node); > + if (ret) > + goto error_disable_clk; > + > + ret = iio_device_register(indio_dev); > + if (ret < 0) > + goto error_disable_clk; > + > + return 0; > + > +error_disable_clk: > + clk_disable_unprepare(st->mclk); > +error_remove_trigger: > + ad_sd_cleanup_buffer_and_trigger(indio_dev); > +error_disable_dvdd: > + regulator_disable(st->dvdd); > +error_disable_avdd: > + regulator_disable(st->avdd); > + > + return ret; > +} > + > +static int ad7192_remove(struct spi_device *spi) > +{ > + struct iio_dev *indio_dev = spi_get_drvdata(spi); > + struct ad7192_state *st = iio_priv(indio_dev); > + > + iio_device_unregister(indio_dev); > + clk_disable_unprepare(st->mclk); > + ad_sd_cleanup_buffer_and_trigger(indio_dev); > + > + regulator_disable(st->dvdd); > + regulator_disable(st->avdd); > + > + return 0; > +} > + > +static const struct of_device_id ad7192_of_match[] = { > + { .compatible = "adi,ad7190", .data = (void *)ID_AD7190}, > + { .compatible = "adi,ad7192", .data = (void *)ID_AD7192 }, > + { .compatible = "adi,ad7193", .data = (void *)ID_AD7193 }, > + { .compatible = "adi,ad7195", .data = (void *)ID_AD7195 }, > + {} > +}; > + > +MODULE_DEVICE_TABLE(of, ad7192_of_match); > + > +static struct spi_driver ad7192_driver = { > + .driver = { > + .name = "ad7192", > + .of_match_table = ad7192_of_match, > + }, > + .probe = ad7192_probe, > + .remove = ad7192_remove, > +}; > +module_spi_driver(ad7192_driver); > + > +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); > +MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC"); > +MODULE_LICENSE("GPL v2");
On Thu, 6 Feb 2020 10:10:48 +0000 Jonathan Cameron <jic23@kernel.org> wrote: > On Wed, 5 Feb 2020 19:15:11 +0200 > Alexandru Tachici <alexandru.tachici@analog.com> wrote: > > > Move ad7192 ADC driver out of staging into mainline. > > > > Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> > > Nice. To my eyes only remaining bits are the minor tweaks in earlier > patches in this series. > > If anyone else has time to look at this one that would be great of > course! > > Only 2 more ADC drivers to go in staging after this one :) Speaking of which: ad7816 is obsolete so up to Analog to decide if you want to deal with it or just drop the driver. Doesn't look like it would take a 'lot' to drag that one into the modern age, but if no one has hardware to test... ad7280a needs events interface bringing up to date and there are a few bits of custom ABI that need documenting and might need slighty tweaking. Looks easy enough so I'll cross my fingers you or one of the Analog team can get that one sorted in near future ;) Thanks, Jonathan > > Thanks, > > Jonathan > > > --- > > MAINTAINERS | 8 + > > drivers/iio/adc/Kconfig | 12 + > > drivers/iio/adc/Makefile | 1 + > > drivers/iio/adc/ad7192.c | 1043 ++++++++++++++++++++++++++++++ > > drivers/staging/iio/adc/Kconfig | 12 - > > drivers/staging/iio/adc/Makefile | 1 - > > drivers/staging/iio/adc/ad7192.c | 1043 ------------------------------ > > 7 files changed, 1064 insertions(+), 1056 deletions(-) > > create mode 100644 drivers/iio/adc/ad7192.c > > delete mode 100644 drivers/staging/iio/adc/ad7192.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index e699fe378e71..c82bdb31e2fb 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -922,6 +922,14 @@ S: Supported > > F: drivers/iio/adc/ad7124.c > > F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml > > > > +ANALOG DEVICES INC AD7192 DRIVER > > +M: Alexandru Tachici <alexandru.tachici@analog.com> > > +L: linux-iio@vger.kernel.org > > +W: http://ez.analog.com/community/linux-device-drivers > > +S: Supported > > +F: drivers/iio/adc/ad7192.c > > +F: Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml > > + > > ANALOG DEVICES INC AD7292 DRIVER > > M: Marcelo Schmitt <marcelo.schmitt1@gmail.com> > > L: linux-iio@vger.kernel.org > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > > index 82e33082958c..f4da821c4022 100644 > > --- a/drivers/iio/adc/Kconfig > > +++ b/drivers/iio/adc/Kconfig > > @@ -39,6 +39,18 @@ config AD7124 > > To compile this driver as a module, choose M here: the module will be > > called ad7124. > > > > +config AD7192 > > + tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" > > + depends on SPI > > + select AD_SIGMA_DELTA > > + help > > + Say yes here to build support for Analog Devices AD7190, > > + AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). > > + If unsure, say N (but it's safe to say "Y"). > > + > > + To compile this driver as a module, choose M here: the > > + module will be called ad7192. > > + > > config AD7266 > > tristate "Analog Devices AD7265/AD7266 ADC driver" > > depends on SPI_MASTER > > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > > index 919228900df9..8462455b4228 100644 > > --- a/drivers/iio/adc/Makefile > > +++ b/drivers/iio/adc/Makefile > > @@ -8,6 +8,7 @@ obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o > > obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o > > obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o > > obj-$(CONFIG_AD7124) += ad7124.o > > +obj-$(CONFIG_AD7192) += ad7192.o > > obj-$(CONFIG_AD7266) += ad7266.o > > obj-$(CONFIG_AD7291) += ad7291.o > > obj-$(CONFIG_AD7292) += ad7292.o > > diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c > > new file mode 100644 > > index 000000000000..e75d808a2f41 > > --- /dev/null > > +++ b/drivers/iio/adc/ad7192.c > > @@ -0,0 +1,1043 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * AD7190 AD7192 AD7193 AD7195 SPI ADC driver > > + * > > + * Copyright 2011-2015 Analog Devices Inc. > > + */ > > + > > +#include <linux/interrupt.h> > > +#include <linux/clk.h> > > +#include <linux/device.h> > > +#include <linux/kernel.h> > > +#include <linux/slab.h> > > +#include <linux/sysfs.h> > > +#include <linux/spi/spi.h> > > +#include <linux/regulator/consumer.h> > > +#include <linux/err.h> > > +#include <linux/sched.h> > > +#include <linux/delay.h> > > +#include <linux/of_device.h> > > + > > +#include <linux/iio/iio.h> > > +#include <linux/iio/sysfs.h> > > +#include <linux/iio/buffer.h> > > +#include <linux/iio/trigger.h> > > +#include <linux/iio/trigger_consumer.h> > > +#include <linux/iio/triggered_buffer.h> > > +#include <linux/iio/adc/ad_sigma_delta.h> > > + > > +/* Registers */ > > +#define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) */ > > +#define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) */ > > +#define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit */ > > +#define AD7192_REG_CONF 2 /* Configuration Register (RW, 24-bit) */ > > +#define AD7192_REG_DATA 3 /* Data Register (RO, 24/32-bit) */ > > +#define AD7192_REG_ID 4 /* ID Register (RO, 8-bit) */ > > +#define AD7192_REG_GPOCON 5 /* GPOCON Register (RO, 8-bit) */ > > +#define AD7192_REG_OFFSET 6 /* Offset Register (RW, 16-bit */ > > + /* (AD7792)/24-bit (AD7192)) */ > > +#define AD7192_REG_FULLSALE 7 /* Full-Scale Register */ > > + /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */ > > + > > +/* Communications Register Bit Designations (AD7192_REG_COMM) */ > > +#define AD7192_COMM_WEN BIT(7) /* Write Enable */ > > +#define AD7192_COMM_WRITE 0 /* Write Operation */ > > +#define AD7192_COMM_READ BIT(6) /* Read Operation */ > > +#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ > > +#define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data Register */ > > + > > +/* Status Register Bit Designations (AD7192_REG_STAT) */ > > +#define AD7192_STAT_RDY BIT(7) /* Ready */ > > +#define AD7192_STAT_ERR BIT(6) /* Error (Overrange, Underrange) */ > > +#define AD7192_STAT_NOREF BIT(5) /* Error no external reference */ > > +#define AD7192_STAT_PARITY BIT(4) /* Parity */ > > +#define AD7192_STAT_CH3 BIT(2) /* Channel 3 */ > > +#define AD7192_STAT_CH2 BIT(1) /* Channel 2 */ > > +#define AD7192_STAT_CH1 BIT(0) /* Channel 1 */ > > + > > +/* Mode Register Bit Designations (AD7192_REG_MODE) */ > > +#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode Select */ > > +#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select Mask */ > > +#define AD7192_MODE_DAT_STA BIT(20) /* Status Register transmission */ > > +#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ > > +#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ > > +#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 only)*/ > > +#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ > > +#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/ > > +#define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ > > +#define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */ > > +#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate Select */ > > + > > +/* Mode Register: AD7192_MODE_SEL options */ > > +#define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ > > +#define AD7192_MODE_SINGLE 1 /* Single Conversion Mode */ > > +#define AD7192_MODE_IDLE 2 /* Idle Mode */ > > +#define AD7192_MODE_PWRDN 3 /* Power-Down Mode */ > > +#define AD7192_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ > > +#define AD7192_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ > > +#define AD7192_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ > > +#define AD7192_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ > > + > > +/* Mode Register: AD7192_MODE_CLKSRC options */ > > +#define AD7192_CLK_EXT_MCLK1_2 0 /* External 4.92 MHz Clock connected*/ > > + /* from MCLK1 to MCLK2 */ > > +#define AD7192_CLK_EXT_MCLK2 1 /* External Clock applied to MCLK2 */ > > +#define AD7192_CLK_INT 2 /* Internal 4.92 MHz Clock not */ > > + /* available at the MCLK2 pin */ > > +#define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock available*/ > > + /* at the MCLK2 pin */ > > + > > +/* Configuration Register Bit Designations (AD7192_REG_CONF) */ > > + > > +#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ > > +#define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ > > +#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ > > +#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ > > +#define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ > > +#define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ > > +#define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ > > +#define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ > > +#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ > > + > > +#define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ > > +#define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ > > +#define AD7192_CH_TEMP BIT(2) /* Temp Sensor */ > > +#define AD7192_CH_AIN2P_AIN2M BIT(3) /* AIN2(+) - AIN2(-) */ > > +#define AD7192_CH_AIN1 BIT(4) /* AIN1 - AINCOM */ > > +#define AD7192_CH_AIN2 BIT(5) /* AIN2 - AINCOM */ > > +#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */ > > +#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */ > > + > > +#define AD7193_CH_AIN1P_AIN2M 0x001 /* AIN1(+) - AIN2(-) */ > > +#define AD7193_CH_AIN3P_AIN4M 0x002 /* AIN3(+) - AIN4(-) */ > > +#define AD7193_CH_AIN5P_AIN6M 0x004 /* AIN5(+) - AIN6(-) */ > > +#define AD7193_CH_AIN7P_AIN8M 0x008 /* AIN7(+) - AIN8(-) */ > > +#define AD7193_CH_TEMP 0x100 /* Temp senseor */ > > +#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */ > > +#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */ > > +#define AD7193_CH_AIN2 0x402 /* AIN2 - AINCOM */ > > +#define AD7193_CH_AIN3 0x404 /* AIN3 - AINCOM */ > > +#define AD7193_CH_AIN4 0x408 /* AIN4 - AINCOM */ > > +#define AD7193_CH_AIN5 0x410 /* AIN5 - AINCOM */ > > +#define AD7193_CH_AIN6 0x420 /* AIN6 - AINCOM */ > > +#define AD7193_CH_AIN7 0x440 /* AIN7 - AINCOM */ > > +#define AD7193_CH_AIN8 0x480 /* AIN7 - AINCOM */ > > +#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */ > > + > > +/* ID Register Bit Designations (AD7192_REG_ID) */ > > +#define ID_AD7190 0x4 > > +#define ID_AD7192 0x0 > > +#define ID_AD7193 0x2 > > +#define ID_AD7195 0x6 > > +#define AD7192_ID_MASK 0x0F > > + > > +/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ > > +#define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch enable */ > > +#define AD7192_GPOCON_GP32EN BIT(5) /* Digital Output P3 and P2 enable */ > > +#define AD7192_GPOCON_GP10EN BIT(4) /* Digital Output P1 and P0 enable */ > > +#define AD7192_GPOCON_P3DAT BIT(3) /* P3 state */ > > +#define AD7192_GPOCON_P2DAT BIT(2) /* P2 state */ > > +#define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */ > > +#define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */ > > + > > +#define AD7192_EXT_FREQ_MHZ_MIN 2457600 > > +#define AD7192_EXT_FREQ_MHZ_MAX 5120000 > > +#define AD7192_INT_FREQ_MHZ 4915200 > > + > > +#define AD7192_NO_SYNC_FILTER 1 > > +#define AD7192_SYNC3_FILTER 3 > > +#define AD7192_SYNC4_FILTER 4 > > + > > +/* NOTE: > > + * The AD7190/2/5 features a dual use data out ready DOUT/RDY output. > > + * In order to avoid contentions on the SPI bus, it's therefore necessary > > + * to use spi bus locking. > > + * > > + * The DOUT/RDY output must also be wired to an interrupt capable GPIO. > > + */ > > + > > +enum { > > + AD7192_SYSCALIB_ZERO_SCALE, > > + AD7192_SYSCALIB_FULL_SCALE, > > +}; > > + > > +struct ad7192_state { > > + struct regulator *avdd; > > + struct regulator *dvdd; > > + struct clk *mclk; > > + u16 int_vref_mv; > > + u32 fclk; > > + u32 f_order; > > + u32 mode; > > + u32 conf; > > + u32 scale_avail[8][2]; > > + u8 gpocon; > > + u8 devid; > > + u8 clock_sel; > > + struct mutex lock; /* protect sensor state */ > > + u8 syscalib_mode[8]; > > + > > + struct ad_sigma_delta sd; > > +}; > > + > > +static const char * const ad7192_syscalib_modes[] = { > > + [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale", > > + [AD7192_SYSCALIB_FULL_SCALE] = "full_scale", > > +}; > > + > > +static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev, > > + const struct iio_chan_spec *chan, > > + unsigned int mode) > > +{ > > + struct ad7192_state *st = iio_priv(indio_dev); > > + > > + st->syscalib_mode[chan->channel] = mode; > > + > > + return 0; > > +} > > + > > +static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev, > > + const struct iio_chan_spec *chan) > > +{ > > + struct ad7192_state *st = iio_priv(indio_dev); > > + > > + return st->syscalib_mode[chan->channel]; > > +} > > + > > +static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev, > > + uintptr_t private, > > + const struct iio_chan_spec *chan, > > + const char *buf, size_t len) > > +{ > > + struct ad7192_state *st = iio_priv(indio_dev); > > + bool sys_calib; > > + int ret, temp; > > + > > + ret = strtobool(buf, &sys_calib); > > + if (ret) > > + return ret; > > + > > + temp = st->syscalib_mode[chan->channel]; > > + if (sys_calib) { > > + if (temp == AD7192_SYSCALIB_ZERO_SCALE) > > + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO, > > + chan->address); > > + else > > + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL, > > + chan->address); > > + } > > + > > + return ret ? ret : len; > > +} > > + > > +static const struct iio_enum ad7192_syscalib_mode_enum = { > > + .items = ad7192_syscalib_modes, > > + .num_items = ARRAY_SIZE(ad7192_syscalib_modes), > > + .set = ad7192_set_syscalib_mode, > > + .get = ad7192_get_syscalib_mode > > +}; > > + > > +static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = { > > + { > > + .name = "sys_calibration", > > + .write = ad7192_write_syscalib, > > + .shared = IIO_SEPARATE, > > + }, > > + IIO_ENUM("sys_calibration_mode", IIO_SEPARATE, > > + &ad7192_syscalib_mode_enum), > > + IIO_ENUM_AVAILABLE("sys_calibration_mode", &ad7192_syscalib_mode_enum), > > + {} > > +}; > > + > > +static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd) > > +{ > > + return container_of(sd, struct ad7192_state, sd); > > +} > > + > > +static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel) > > +{ > > + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); > > + > > + st->conf &= ~AD7192_CONF_CHAN_MASK; > > + st->conf |= AD7192_CONF_CHAN(channel); > > + > > + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > > +} > > + > > +static int ad7192_set_mode(struct ad_sigma_delta *sd, > > + enum ad_sigma_delta_mode mode) > > +{ > > + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); > > + > > + st->mode &= ~AD7192_MODE_SEL_MASK; > > + st->mode |= AD7192_MODE_SEL(mode); > > + > > + return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > +} > > + > > +static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { > > + .set_channel = ad7192_set_channel, > > + .set_mode = ad7192_set_mode, > > + .has_registers = true, > > + .addr_shift = 3, > > + .read_mask = BIT(6), > > +}; > > + > > +static const struct ad_sd_calib_data ad7192_calib_arr[8] = { > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1}, > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1}, > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2}, > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2}, > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3}, > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3}, > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4}, > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4} > > +}; > > + > > +static int ad7192_calibrate_all(struct ad7192_state *st) > > +{ > > + return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr, > > + ARRAY_SIZE(ad7192_calib_arr)); > > +} > > + > > +static inline bool ad7192_valid_external_frequency(u32 freq) > > +{ > > + return (freq >= AD7192_EXT_FREQ_MHZ_MIN && > > + freq <= AD7192_EXT_FREQ_MHZ_MAX); > > +} > > + > > +static int ad7192_of_clock_select(struct ad7192_state *st) > > +{ > > + struct device_node *np = st->sd.spi->dev.of_node; > > + unsigned int clock_sel; > > + > > + clock_sel = AD7192_CLK_INT; > > + > > + /* use internal clock */ > > + if (PTR_ERR(st->mclk) == -ENOENT) { > > + if (of_property_read_bool(np, "adi,int-clock-output-enable")) > > + clock_sel = AD7192_CLK_INT_CO; > > + } else { > > + if (of_property_read_bool(np, "adi,clock-xtal")) > > + clock_sel = AD7192_CLK_EXT_MCLK1_2; > > + else > > + clock_sel = AD7192_CLK_EXT_MCLK2; > > + } > > + > > + return clock_sel; > > +} > > + > > +static int ad7192_setup(struct ad7192_state *st, struct device_node *np) > > +{ > > + struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi); > > + bool rej60_en, refin2_en; > > + bool buf_en, bipolar, burnout_curr_en; > > + unsigned long long scale_uv; > > + int i, ret, id; > > + > > + /* reset the serial interface */ > > + ret = ad_sd_reset(&st->sd, 48); > > + if (ret < 0) > > + return ret; > > + usleep_range(500, 1000); /* Wait for at least 500us */ > > + > > + /* write/read test for device presence */ > > + ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id); > > + if (ret) > > + return ret; > > + > > + id &= AD7192_ID_MASK; > > + > > + if (id != st->devid) > > + dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n", > > + id); > > + > > + st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | > > + AD7192_MODE_CLKSRC(st->clock_sel) | > > + AD7192_MODE_RATE(480); > > + > > + st->conf = AD7192_CONF_GAIN(0); > > + > > + rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); > > + if (rej60_en) > > + st->mode |= AD7192_MODE_REJ60; > > + > > + refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable"); > > + if (refin2_en && st->devid != ID_AD7195) > > + st->conf |= AD7192_CONF_REFSEL; > > + > > + st->conf &= ~AD7192_CONF_CHOP; > > + st->f_order = AD7192_NO_SYNC_FILTER; > > + > > + buf_en = of_property_read_bool(np, "adi,buffer-enable"); > > + if (buf_en) > > + st->conf |= AD7192_CONF_BUF; > > + > > + bipolar = of_property_read_bool(np, "bipolar"); > > + if (!bipolar) > > + st->conf |= AD7192_CONF_UNIPOLAR; > > + > > + burnout_curr_en = of_property_read_bool(np, > > + "adi,burnout-currents-enable"); > > + if (burnout_curr_en && buf_en) { > > + st->conf |= AD7192_CONF_BURN; > > + } else if (burnout_curr_en) { > > + dev_warn(&st->sd.spi->dev, > > + "Can't enable burnout currents: see CHOP or buffer\n"); > > + } > > + > > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > + if (ret) > > + return ret; > > + > > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > > + if (ret) > > + return ret; > > + > > + ret = ad7192_calibrate_all(st); > > + if (ret) > > + return ret; > > + > > + /* Populate available ADC input ranges */ > > + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { > > + scale_uv = ((u64)st->int_vref_mv * 100000000) > > + >> (indio_dev->channels[0].scan_type.realbits - > > + ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); > > + scale_uv >>= i; > > + > > + st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; > > + st->scale_avail[i][0] = scale_uv; > > + } > > + > > + return 0; > > +} > > + > > +static ssize_t ad7192_show_ac_excitation(struct device *dev, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > + struct ad7192_state *st = iio_priv(indio_dev); > > + > > + return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); > > +} > > + > > +static ssize_t ad7192_show_bridge_switch(struct device *dev, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > + struct ad7192_state *st = iio_priv(indio_dev); > > + > > + return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); > > +} > > + > > +static ssize_t ad7192_set(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, > > + size_t len) > > +{ > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > + struct ad7192_state *st = iio_priv(indio_dev); > > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); > > + int ret; > > + bool val; > > + > > + ret = strtobool(buf, &val); > > + if (ret < 0) > > + return ret; > > + > > + ret = iio_device_claim_direct_mode(indio_dev); > > + if (ret) > > + return ret; > > + > > + switch ((u32)this_attr->address) { > > + case AD7192_REG_GPOCON: > > + if (val) > > + st->gpocon |= AD7192_GPOCON_BPDSW; > > + else > > + st->gpocon &= ~AD7192_GPOCON_BPDSW; > > + > > + ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon); > > + break; > > + case AD7192_REG_MODE: > > + if (val) > > + st->mode |= AD7192_MODE_ACX; > > + else > > + st->mode &= ~AD7192_MODE_ACX; > > + > > + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > + break; > > + default: > > + ret = -EINVAL; > > + } > > + > > + iio_device_release_direct_mode(indio_dev); > > + > > + return ret ? ret : len; > > +} > > + > > +static void ad7192_get_available_filter_freq(struct ad7192_state *st, > > + int *freq) > > +{ > > + unsigned int fadc; > > + > > + /* Formulas for filter at page 25 of the datasheet */ > > + fadc = DIV_ROUND_CLOSEST(st->fclk, > > + AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode)); > > + freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); > > + > > + fadc = DIV_ROUND_CLOSEST(st->fclk, > > + AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode)); > > + freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); > > + > > + fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); > > + freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024); > > + freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024); > > +} > > + > > +static ssize_t ad7192_show_filter_avail(struct device *dev, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > + struct ad7192_state *st = iio_priv(indio_dev); > > + unsigned int freq_avail[4], i; > > + size_t len = 0; > > + > > + ad7192_get_available_filter_freq(st, freq_avail); > > + > > + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) > > + len += scnprintf(buf + len, PAGE_SIZE - len, > > + "%d.%d ", freq_avail[i] / 1000, > > + freq_avail[i] % 1000); > > + > > + buf[len - 1] = '\n'; > > + > > + return len; > > +} > > + > > +static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available, > > + 0444, ad7192_show_filter_avail, NULL, 0); > > + > > +static IIO_DEVICE_ATTR(bridge_switch_en, 0644, > > + ad7192_show_bridge_switch, ad7192_set, > > + AD7192_REG_GPOCON); > > + > > +static IIO_DEVICE_ATTR(ac_excitation_en, 0644, > > + ad7192_show_ac_excitation, ad7192_set, > > + AD7192_REG_MODE); > > + > > +static struct attribute *ad7192_attributes[] = { > > + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, > > + &iio_dev_attr_bridge_switch_en.dev_attr.attr, > > + &iio_dev_attr_ac_excitation_en.dev_attr.attr, > > + NULL > > +}; > > + > > +static const struct attribute_group ad7192_attribute_group = { > > + .attrs = ad7192_attributes, > > +}; > > + > > +static struct attribute *ad7195_attributes[] = { > > + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, > > + &iio_dev_attr_bridge_switch_en.dev_attr.attr, > > + NULL > > +}; > > + > > +static const struct attribute_group ad7195_attribute_group = { > > + .attrs = ad7195_attributes, > > +}; > > + > > +static unsigned int ad7192_get_temp_scale(bool unipolar) > > +{ > > + return unipolar ? 2815 * 2 : 2815; > > +} > > + > > +static int ad7192_set_3db_filter_freq(struct ad7192_state *st, > > + int val, int val2) > > +{ > > + int freq_avail[4], i, ret, freq; > > + unsigned int diff_new, diff_old; > > + int idx = 0; > > + > > + diff_old = U32_MAX; > > + freq = val * 1000 + val2; > > + > > + ad7192_get_available_filter_freq(st, freq_avail); > > + > > + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) { > > + diff_new = abs(freq - freq_avail[i]); > > + if (diff_new < diff_old) { > > + diff_old = diff_new; > > + idx = i; > > + } > > + } > > + > > + switch (idx) { > > + case 0: > > + st->f_order = AD7192_SYNC4_FILTER; > > + st->mode &= ~AD7192_MODE_SINC3; > > + > > + st->conf |= AD7192_CONF_CHOP; > > + break; > > + case 1: > > + st->f_order = AD7192_SYNC3_FILTER; > > + st->mode |= AD7192_MODE_SINC3; > > + > > + st->conf |= AD7192_CONF_CHOP; > > + break; > > + case 2: > > + st->f_order = AD7192_NO_SYNC_FILTER; > > + st->mode &= ~AD7192_MODE_SINC3; > > + > > + st->conf &= ~AD7192_CONF_CHOP; > > + break; > > + case 3: > > + st->f_order = AD7192_NO_SYNC_FILTER; > > + st->mode |= AD7192_MODE_SINC3; > > + > > + st->conf &= ~AD7192_CONF_CHOP; > > + break; > > + } > > + > > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > + if (ret < 0) > > + return ret; > > + > > + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > > +} > > + > > +static int ad7192_get_3db_filter_freq(struct ad7192_state *st) > > +{ > > + unsigned int fadc; > > + > > + fadc = DIV_ROUND_CLOSEST(st->fclk, > > + st->f_order * AD7192_MODE_RATE(st->mode)); > > + > > + if (st->conf & AD7192_CONF_CHOP) > > + return DIV_ROUND_CLOSEST(fadc * 240, 1024); > > + if (st->mode & AD7192_MODE_SINC3) > > + return DIV_ROUND_CLOSEST(fadc * 272, 1024); > > + else > > + return DIV_ROUND_CLOSEST(fadc * 230, 1024); > > +} > > + > > +static int ad7192_read_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, > > + int *val2, > > + long m) > > +{ > > + struct ad7192_state *st = iio_priv(indio_dev); > > + bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); > > + > > + switch (m) { > > + case IIO_CHAN_INFO_RAW: > > + return ad_sigma_delta_single_conversion(indio_dev, chan, val); > > + case IIO_CHAN_INFO_SCALE: > > + switch (chan->type) { > > + case IIO_VOLTAGE: > > + mutex_lock(&st->lock); > > + *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; > > + *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; > > + mutex_unlock(&st->lock); > > + return IIO_VAL_INT_PLUS_NANO; > > + case IIO_TEMP: > > + *val = 0; > > + *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); > > + return IIO_VAL_INT_PLUS_NANO; > > + default: > > + return -EINVAL; > > + } > > + case IIO_CHAN_INFO_OFFSET: > > + if (!unipolar) > > + *val = -(1 << (chan->scan_type.realbits - 1)); > > + else > > + *val = 0; > > + /* Kelvin to Celsius */ > > + if (chan->type == IIO_TEMP) > > + *val -= 273 * ad7192_get_temp_scale(unipolar); > > + return IIO_VAL_INT; > > + case IIO_CHAN_INFO_SAMP_FREQ: > > + *val = st->fclk / > > + (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); > > + return IIO_VAL_INT; > > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > > + *val = ad7192_get_3db_filter_freq(st); > > + *val2 = 1000; > > + return IIO_VAL_FRACTIONAL; > > + } > > + > > + return -EINVAL; > > +} > > + > > +static int ad7192_write_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int val, > > + int val2, > > + long mask) > > +{ > > + struct ad7192_state *st = iio_priv(indio_dev); > > + int ret, i, div; > > + unsigned int tmp; > > + > > + ret = iio_device_claim_direct_mode(indio_dev); > > + if (ret) > > + return ret; > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_SCALE: > > + ret = -EINVAL; > > + mutex_lock(&st->lock); > > + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) > > + if (val2 == st->scale_avail[i][1]) { > > + ret = 0; > > + tmp = st->conf; > > + st->conf &= ~AD7192_CONF_GAIN(-1); > > + st->conf |= AD7192_CONF_GAIN(i); > > + if (tmp == st->conf) > > + break; > > + ad_sd_write_reg(&st->sd, AD7192_REG_CONF, > > + 3, st->conf); > > + ad7192_calibrate_all(st); > > + break; > > + } > > + mutex_unlock(&st->lock); > > + break; > > + case IIO_CHAN_INFO_SAMP_FREQ: > > + if (!val) { > > + ret = -EINVAL; > > + break; > > + } > > + > > + div = st->fclk / (val * st->f_order * 1024); > > + if (div < 1 || div > 1023) { > > + ret = -EINVAL; > > + break; > > + } > > + > > + st->mode &= ~AD7192_MODE_RATE(-1); > > + st->mode |= AD7192_MODE_RATE(div); > > + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > + break; > > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > > + ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000); > > + break; > > + default: > > + ret = -EINVAL; > > + } > > + > > + iio_device_release_direct_mode(indio_dev); > > + > > + return ret; > > +} > > + > > +static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + long mask) > > +{ > > + switch (mask) { > > + case IIO_CHAN_INFO_SCALE: > > + return IIO_VAL_INT_PLUS_NANO; > > + case IIO_CHAN_INFO_SAMP_FREQ: > > + return IIO_VAL_INT; > > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > > + return IIO_VAL_INT_PLUS_MICRO; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int ad7192_read_avail(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + const int **vals, int *type, int *length, > > + long mask) > > +{ > > + struct ad7192_state *st = iio_priv(indio_dev); > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_SCALE: > > + *vals = (int *)st->scale_avail; > > + *type = IIO_VAL_INT_PLUS_NANO; > > + /* Values are stored in a 2D matrix */ > > + *length = ARRAY_SIZE(st->scale_avail) * 2; > > + > > + return IIO_AVAIL_LIST; > > + } > > + > > + return -EINVAL; > > +} > > + > > +static const struct iio_info ad7192_info = { > > + .read_raw = ad7192_read_raw, > > + .write_raw = ad7192_write_raw, > > + .write_raw_get_fmt = ad7192_write_raw_get_fmt, > > + .read_avail = ad7192_read_avail, > > + .attrs = &ad7192_attribute_group, > > + .validate_trigger = ad_sd_validate_trigger, > > +}; > > + > > +static const struct iio_info ad7195_info = { > > + .read_raw = ad7192_read_raw, > > + .write_raw = ad7192_write_raw, > > + .write_raw_get_fmt = ad7192_write_raw_get_fmt, > > + .read_avail = ad7192_read_avail, > > + .attrs = &ad7195_attribute_group, > > + .validate_trigger = ad_sd_validate_trigger, > > +}; > > + > > +#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \ > > + _type, _mask_type_av, _ext_info) \ > > + { \ > > + .type = (_type), \ > > + .differential = ((_channel2) == -1 ? 0 : 1), \ > > + .indexed = 1, \ > > + .channel = (_channel1), \ > > + .channel2 = (_channel2), \ > > + .address = (_address), \ > > + .extend_name = (_extend_name), \ > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > > + BIT(IIO_CHAN_INFO_OFFSET), \ > > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ > > + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ > > + .info_mask_shared_by_type_available = (_mask_type_av), \ > > + .ext_info = (_ext_info), \ > > + .scan_index = (_si), \ > > + .scan_type = { \ > > + .sign = 'u', \ > > + .realbits = 24, \ > > + .storagebits = 32, \ > > + .endianness = IIO_BE, \ > > + }, \ > > + } > > + > > +#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ > > + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \ > > + IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \ > > + ad7192_calibsys_ext_info) > > + > > +#define AD719x_CHANNEL(_si, _channel1, _address) \ > > + __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \ > > + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) > > + > > +#define AD719x_SHORTED_CHANNEL(_si, _channel1, _address) \ > > + __AD719x_CHANNEL(_si, _channel1, -1, _address, "shorted", IIO_VOLTAGE, \ > > + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) > > + > > +#define AD719x_TEMP_CHANNEL(_si, _address) \ > > + __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL) > > + > > +static const struct iio_chan_spec ad7192_channels[] = { > > + AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M), > > + AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M), > > + AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP), > > + AD719x_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M), > > + AD719x_CHANNEL(4, 1, AD7192_CH_AIN1), > > + AD719x_CHANNEL(5, 2, AD7192_CH_AIN2), > > + AD719x_CHANNEL(6, 3, AD7192_CH_AIN3), > > + AD719x_CHANNEL(7, 4, AD7192_CH_AIN4), > > + IIO_CHAN_SOFT_TIMESTAMP(8), > > +}; > > + > > +static const struct iio_chan_spec ad7193_channels[] = { > > + AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), > > + AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), > > + AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), > > + AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), > > + AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP), > > + AD719x_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M), > > + AD719x_CHANNEL(6, 1, AD7193_CH_AIN1), > > + AD719x_CHANNEL(7, 2, AD7193_CH_AIN2), > > + AD719x_CHANNEL(8, 3, AD7193_CH_AIN3), > > + AD719x_CHANNEL(9, 4, AD7193_CH_AIN4), > > + AD719x_CHANNEL(10, 5, AD7193_CH_AIN5), > > + AD719x_CHANNEL(11, 6, AD7193_CH_AIN6), > > + AD719x_CHANNEL(12, 7, AD7193_CH_AIN7), > > + AD719x_CHANNEL(13, 8, AD7193_CH_AIN8), > > + IIO_CHAN_SOFT_TIMESTAMP(14), > > +}; > > + > > +static int ad7192_channels_config(struct iio_dev *indio_dev) > > +{ > > + struct ad7192_state *st = iio_priv(indio_dev); > > + > > + switch (st->devid) { > > + case ID_AD7193: > > + indio_dev->channels = ad7193_channels; > > + indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); > > + break; > > + default: > > + indio_dev->channels = ad7192_channels; > > + indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); > > + break; > > + } > > + > > + return 0; > > +} > > + > > +static const struct of_device_id ad7192_of_match[]; > > + > > +static int ad7192_probe(struct spi_device *spi) > > +{ > > + const struct of_device_id *match; > > + struct ad7192_state *st; > > + struct iio_dev *indio_dev; > > + int ret, voltage_uv = 0; > > + > > + if (!spi->irq) { > > + dev_err(&spi->dev, "no IRQ?\n"); > > + return -ENODEV; > > + } > > + > > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); > > + if (!indio_dev) > > + return -ENOMEM; > > + > > + st = iio_priv(indio_dev); > > + > > + mutex_init(&st->lock); > > + > > + st->avdd = devm_regulator_get(&spi->dev, "avdd"); > > + if (IS_ERR(st->avdd)) > > + return PTR_ERR(st->avdd); > > + > > + ret = regulator_enable(st->avdd); > > + if (ret) { > > + dev_err(&spi->dev, "Failed to enable specified AVdd supply\n"); > > + return ret; > > + } > > + > > + st->dvdd = devm_regulator_get(&spi->dev, "dvdd"); > > + if (IS_ERR(st->dvdd)) { > > + ret = PTR_ERR(st->dvdd); > > + goto error_disable_avdd; > > + } > > + > > + ret = regulator_enable(st->dvdd); > > + if (ret) { > > + dev_err(&spi->dev, "Failed to enable specified DVdd supply\n"); > > + goto error_disable_avdd; > > + } > > + > > + voltage_uv = regulator_get_voltage(st->avdd); > > + > > + if (voltage_uv) { > > + st->int_vref_mv = voltage_uv / 1000; > > + } else { > > + ret = voltage_uv; > > + dev_err(&spi->dev, "Device tree error, reference voltage undefined\n"); > > + goto error_disable_avdd; > > + } > > + > > + match = of_match_device(ad7192_of_match, &spi->dev); > > + if (!match) > > + return -EINVAL; > > + > > + spi_set_drvdata(spi, indio_dev); > > + st->devid = (unsigned long)match->data; > > + indio_dev->dev.parent = &spi->dev; > > + indio_dev->name = spi_get_device_id(spi)->name; > > + indio_dev->modes = INDIO_DIRECT_MODE; > > + > > + ret = ad7192_channels_config(indio_dev); > > + if (ret < 0) > > + goto error_disable_dvdd; > > + > > + if (st->devid == ID_AD7195) > > + indio_dev->info = &ad7195_info; > > + else > > + indio_dev->info = &ad7192_info; > > + > > + ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info); > > + > > + ret = ad_sd_setup_buffer_and_trigger(indio_dev); > > + if (ret) > > + goto error_disable_dvdd; > > + > > + st->fclk = AD7192_INT_FREQ_MHZ; > > + > > + st->mclk = devm_clk_get(&st->sd.spi->dev, "mclk"); > > + if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) { > > + ret = PTR_ERR(st->mclk); > > + goto error_remove_trigger; > > + } > > + > > + st->clock_sel = ad7192_of_clock_select(st); > > + > > + if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 || > > + st->clock_sel == AD7192_CLK_EXT_MCLK2) { > > + ret = clk_prepare_enable(st->mclk); > > + if (ret < 0) > > + goto error_remove_trigger; > > + > > + st->fclk = clk_get_rate(st->mclk); > > + if (!ad7192_valid_external_frequency(st->fclk)) { > > + ret = -EINVAL; > > + dev_err(&spi->dev, > > + "External clock frequency out of bounds\n"); > > + goto error_disable_clk; > > + } > > + } > > + > > + ret = ad7192_setup(st, spi->dev.of_node); > > + if (ret) > > + goto error_disable_clk; > > + > > + ret = iio_device_register(indio_dev); > > + if (ret < 0) > > + goto error_disable_clk; > > + > > + return 0; > > + > > +error_disable_clk: > > + clk_disable_unprepare(st->mclk); > > +error_remove_trigger: > > + ad_sd_cleanup_buffer_and_trigger(indio_dev); > > +error_disable_dvdd: > > + regulator_disable(st->dvdd); > > +error_disable_avdd: > > + regulator_disable(st->avdd); > > + > > + return ret; > > +} > > + > > +static int ad7192_remove(struct spi_device *spi) > > +{ > > + struct iio_dev *indio_dev = spi_get_drvdata(spi); > > + struct ad7192_state *st = iio_priv(indio_dev); > > + > > + iio_device_unregister(indio_dev); > > + clk_disable_unprepare(st->mclk); > > + ad_sd_cleanup_buffer_and_trigger(indio_dev); > > + > > + regulator_disable(st->dvdd); > > + regulator_disable(st->avdd); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id ad7192_of_match[] = { > > + { .compatible = "adi,ad7190", .data = (void *)ID_AD7190}, > > + { .compatible = "adi,ad7192", .data = (void *)ID_AD7192 }, > > + { .compatible = "adi,ad7193", .data = (void *)ID_AD7193 }, > > + { .compatible = "adi,ad7195", .data = (void *)ID_AD7195 }, > > + {} > > +}; > > + > > +MODULE_DEVICE_TABLE(of, ad7192_of_match); > > + > > +static struct spi_driver ad7192_driver = { > > + .driver = { > > + .name = "ad7192", > > + .of_match_table = ad7192_of_match, > > + }, > > + .probe = ad7192_probe, > > + .remove = ad7192_remove, > > +}; > > +module_spi_driver(ad7192_driver); > > + > > +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); > > +MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC"); > > +MODULE_LICENSE("GPL v2"); > >
On Thu, 2020-02-06 at 10:20 +0000, Jonathan Cameron wrote: > [External] > > On Thu, 6 Feb 2020 10:10:48 +0000 > Jonathan Cameron <jic23@kernel.org> wrote: > > > On Wed, 5 Feb 2020 19:15:11 +0200 > > Alexandru Tachici <alexandru.tachici@analog.com> wrote: > > > > > Move ad7192 ADC driver out of staging into mainline. > > > > > > Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> > > > > Nice. To my eyes only remaining bits are the minor tweaks in earlier > > patches in this series. > > > > If anyone else has time to look at this one that would be great of > > course! > > > > Only 2 more ADC drivers to go in staging after this one :) > Speaking of which: > > ad7816 is obsolete so up to Analog to decide if you want to deal with it > or just drop the driver. Doesn't look like it would take a 'lot' > to drag that one into the modern age, but if no one has hardware to > test... ad7816 is obsolete; but the driver supports ad7817 & ad8718, which are still in production; > > ad7280a needs events interface bringing up to date and there are a few > bits of custom ABI that need documenting and might need slighty tweaking. > Looks easy enough so I'll cross my fingers you or one of the Analog team > can get that one sorted in near future ;) [no promises about dates] would ad7280a be better suited for hwmon/pmbus? the datasheet mentions it as a Lithium Ion Battery Monitoring System i'm asking now, as this may be a question that could pop-up later; > > Thanks, > > Jonathan > > > Thanks, > > > > Jonathan > > > > > --- > > > MAINTAINERS | 8 + > > > drivers/iio/adc/Kconfig | 12 + > > > drivers/iio/adc/Makefile | 1 + > > > drivers/iio/adc/ad7192.c | 1043 ++++++++++++++++++++++++++++++ > > > drivers/staging/iio/adc/Kconfig | 12 - > > > drivers/staging/iio/adc/Makefile | 1 - > > > drivers/staging/iio/adc/ad7192.c | 1043 ------------------------------ > > > 7 files changed, 1064 insertions(+), 1056 deletions(-) > > > create mode 100644 drivers/iio/adc/ad7192.c > > > delete mode 100644 drivers/staging/iio/adc/ad7192.c > > > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > index e699fe378e71..c82bdb31e2fb 100644 > > > --- a/MAINTAINERS > > > +++ b/MAINTAINERS > > > @@ -922,6 +922,14 @@ S: Supported > > > F: drivers/iio/adc/ad7124.c > > > F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml > > > > > > +ANALOG DEVICES INC AD7192 DRIVER > > > +M: Alexandru Tachici <alexandru.tachici@analog.com> > > > +L: linux-iio@vger.kernel.org > > > +W: http://ez.analog.com/community/linux-device-drivers > > > +S: Supported > > > +F: drivers/iio/adc/ad7192.c > > > +F: Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml > > > + > > > ANALOG DEVICES INC AD7292 DRIVER > > > M: Marcelo Schmitt <marcelo.schmitt1@gmail.com> > > > L: linux-iio@vger.kernel.org > > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > > > index 82e33082958c..f4da821c4022 100644 > > > --- a/drivers/iio/adc/Kconfig > > > +++ b/drivers/iio/adc/Kconfig > > > @@ -39,6 +39,18 @@ config AD7124 > > > To compile this driver as a module, choose M here: the module will be > > > called ad7124. > > > > > > +config AD7192 > > > + tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" > > > + depends on SPI > > > + select AD_SIGMA_DELTA > > > + help > > > + Say yes here to build support for Analog Devices AD7190, > > > + AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). > > > + If unsure, say N (but it's safe to say "Y"). > > > + > > > + To compile this driver as a module, choose M here: the > > > + module will be called ad7192. > > > + > > > config AD7266 > > > tristate "Analog Devices AD7265/AD7266 ADC driver" > > > depends on SPI_MASTER > > > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > > > index 919228900df9..8462455b4228 100644 > > > --- a/drivers/iio/adc/Makefile > > > +++ b/drivers/iio/adc/Makefile > > > @@ -8,6 +8,7 @@ obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o > > > obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o > > > obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o > > > obj-$(CONFIG_AD7124) += ad7124.o > > > +obj-$(CONFIG_AD7192) += ad7192.o > > > obj-$(CONFIG_AD7266) += ad7266.o > > > obj-$(CONFIG_AD7291) += ad7291.o > > > obj-$(CONFIG_AD7292) += ad7292.o > > > diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c > > > new file mode 100644 > > > index 000000000000..e75d808a2f41 > > > --- /dev/null > > > +++ b/drivers/iio/adc/ad7192.c > > > @@ -0,0 +1,1043 @@ > > > +// SPDX-License-Identifier: GPL-2.0 > > > +/* > > > + * AD7190 AD7192 AD7193 AD7195 SPI ADC driver > > > + * > > > + * Copyright 2011-2015 Analog Devices Inc. > > > + */ > > > + > > > +#include <linux/interrupt.h> > > > +#include <linux/clk.h> > > > +#include <linux/device.h> > > > +#include <linux/kernel.h> > > > +#include <linux/slab.h> > > > +#include <linux/sysfs.h> > > > +#include <linux/spi/spi.h> > > > +#include <linux/regulator/consumer.h> > > > +#include <linux/err.h> > > > +#include <linux/sched.h> > > > +#include <linux/delay.h> > > > +#include <linux/of_device.h> > > > + > > > +#include <linux/iio/iio.h> > > > +#include <linux/iio/sysfs.h> > > > +#include <linux/iio/buffer.h> > > > +#include <linux/iio/trigger.h> > > > +#include <linux/iio/trigger_consumer.h> > > > +#include <linux/iio/triggered_buffer.h> > > > +#include <linux/iio/adc/ad_sigma_delta.h> > > > + > > > +/* Registers */ > > > +#define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) > > > */ > > > +#define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) > > > */ > > > +#define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit > > > */ > > > +#define AD7192_REG_CONF 2 /* Configuration Register (RW, 24- > > > bit) */ > > > +#define AD7192_REG_DATA 3 /* Data Register (RO, 24/32- > > > bit) */ > > > +#define AD7192_REG_ID 4 /* ID Register (RO, 8-bit) > > > */ > > > +#define AD7192_REG_GPOCON 5 /* GPOCON Register (RO, 8-bit) > > > */ > > > +#define AD7192_REG_OFFSET 6 /* Offset Register (RW, 16-bit > > > */ > > > + /* (AD7792)/24-bit (AD7192)) */ > > > +#define AD7192_REG_FULLSALE 7 /* Full-Scale Register */ > > > + /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */ > > > + > > > +/* Communications Register Bit Designations (AD7192_REG_COMM) */ > > > +#define AD7192_COMM_WEN BIT(7) /* Write Enable */ > > > +#define AD7192_COMM_WRITE 0 /* Write Operation */ > > > +#define AD7192_COMM_READ BIT(6) /* Read Operation */ > > > +#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address > > > */ > > > +#define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data > > > Register */ > > > + > > > +/* Status Register Bit Designations (AD7192_REG_STAT) */ > > > +#define AD7192_STAT_RDY BIT(7) /* Ready */ > > > +#define AD7192_STAT_ERR BIT(6) /* Error (Overrange, Underrange) > > > */ > > > +#define AD7192_STAT_NOREF BIT(5) /* Error no external reference */ > > > +#define AD7192_STAT_PARITY BIT(4) /* Parity */ > > > +#define AD7192_STAT_CH3 BIT(2) /* Channel 3 */ > > > +#define AD7192_STAT_CH2 BIT(1) /* Channel 2 */ > > > +#define AD7192_STAT_CH1 BIT(0) /* Channel 1 */ > > > + > > > +/* Mode Register Bit Designations (AD7192_REG_MODE) */ > > > +#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode > > > Select */ > > > +#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select > > > Mask */ > > > +#define AD7192_MODE_DAT_STA BIT(20) /* Status Register transmission > > > */ > > > +#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source > > > Select */ > > > +#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ > > > +#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 > > > only)*/ > > > +#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ > > > +#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 > > > only)*/ > > > +#define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ > > > +#define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */ > > > +#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate > > > Select */ > > > + > > > +/* Mode Register: AD7192_MODE_SEL options */ > > > +#define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ > > > +#define AD7192_MODE_SINGLE 1 /* Single Conversion Mode */ > > > +#define AD7192_MODE_IDLE 2 /* Idle Mode */ > > > +#define AD7192_MODE_PWRDN 3 /* Power-Down Mode */ > > > +#define AD7192_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ > > > +#define AD7192_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ > > > +#define AD7192_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ > > > +#define AD7192_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ > > > + > > > +/* Mode Register: AD7192_MODE_CLKSRC options */ > > > +#define AD7192_CLK_EXT_MCLK1_2 0 /* External 4.92 MHz Clock > > > connected*/ > > > + /* from MCLK1 to MCLK2 */ > > > +#define AD7192_CLK_EXT_MCLK2 1 /* External Clock applied to > > > MCLK2 */ > > > +#define AD7192_CLK_INT 2 /* Internal 4.92 MHz Clock not > > > */ > > > + /* available at the MCLK2 pin */ > > > +#define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock > > > available*/ > > > + /* at the MCLK2 pin */ > > > + > > > +/* Configuration Register Bit Designations (AD7192_REG_CONF) */ > > > + > > > +#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ > > > +#define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference > > > Select */ > > > +#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ > > > +#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ > > > +#define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ > > > +#define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ > > > +#define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ > > > +#define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ > > > +#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ > > > + > > > +#define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ > > > +#define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ > > > +#define AD7192_CH_TEMP BIT(2) /* Temp Sensor */ > > > +#define AD7192_CH_AIN2P_AIN2M BIT(3) /* AIN2(+) - AIN2(-) */ > > > +#define AD7192_CH_AIN1 BIT(4) /* AIN1 - AINCOM */ > > > +#define AD7192_CH_AIN2 BIT(5) /* AIN2 - AINCOM */ > > > +#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */ > > > +#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */ > > > + > > > +#define AD7193_CH_AIN1P_AIN2M 0x001 /* AIN1(+) - AIN2(-) */ > > > +#define AD7193_CH_AIN3P_AIN4M 0x002 /* AIN3(+) - AIN4(-) */ > > > +#define AD7193_CH_AIN5P_AIN6M 0x004 /* AIN5(+) - AIN6(-) */ > > > +#define AD7193_CH_AIN7P_AIN8M 0x008 /* AIN7(+) - AIN8(-) */ > > > +#define AD7193_CH_TEMP 0x100 /* Temp senseor */ > > > +#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */ > > > +#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */ > > > +#define AD7193_CH_AIN2 0x402 /* AIN2 - AINCOM */ > > > +#define AD7193_CH_AIN3 0x404 /* AIN3 - AINCOM */ > > > +#define AD7193_CH_AIN4 0x408 /* AIN4 - AINCOM */ > > > +#define AD7193_CH_AIN5 0x410 /* AIN5 - AINCOM */ > > > +#define AD7193_CH_AIN6 0x420 /* AIN6 - AINCOM */ > > > +#define AD7193_CH_AIN7 0x440 /* AIN7 - AINCOM */ > > > +#define AD7193_CH_AIN8 0x480 /* AIN7 - AINCOM */ > > > +#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */ > > > + > > > +/* ID Register Bit Designations (AD7192_REG_ID) */ > > > +#define ID_AD7190 0x4 > > > +#define ID_AD7192 0x0 > > > +#define ID_AD7193 0x2 > > > +#define ID_AD7195 0x6 > > > +#define AD7192_ID_MASK 0x0F > > > + > > > +/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ > > > +#define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch > > > enable */ > > > +#define AD7192_GPOCON_GP32EN BIT(5) /* Digital Output P3 and P2 > > > enable */ > > > +#define AD7192_GPOCON_GP10EN BIT(4) /* Digital Output P1 and P0 > > > enable */ > > > +#define AD7192_GPOCON_P3DAT BIT(3) /* P3 state */ > > > +#define AD7192_GPOCON_P2DAT BIT(2) /* P2 state */ > > > +#define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */ > > > +#define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */ > > > + > > > +#define AD7192_EXT_FREQ_MHZ_MIN 2457600 > > > +#define AD7192_EXT_FREQ_MHZ_MAX 5120000 > > > +#define AD7192_INT_FREQ_MHZ 4915200 > > > + > > > +#define AD7192_NO_SYNC_FILTER 1 > > > +#define AD7192_SYNC3_FILTER 3 > > > +#define AD7192_SYNC4_FILTER 4 > > > + > > > +/* NOTE: > > > + * The AD7190/2/5 features a dual use data out ready DOUT/RDY output. > > > + * In order to avoid contentions on the SPI bus, it's therefore necessary > > > + * to use spi bus locking. > > > + * > > > + * The DOUT/RDY output must also be wired to an interrupt capable GPIO. > > > + */ > > > + > > > +enum { > > > + AD7192_SYSCALIB_ZERO_SCALE, > > > + AD7192_SYSCALIB_FULL_SCALE, > > > +}; > > > + > > > +struct ad7192_state { > > > + struct regulator *avdd; > > > + struct regulator *dvdd; > > > + struct clk *mclk; > > > + u16 int_vref_mv; > > > + u32 fclk; > > > + u32 f_order; > > > + u32 mode; > > > + u32 conf; > > > + u32 scale_avail[8][2]; > > > + u8 gpocon; > > > + u8 devid; > > > + u8 clock_sel; > > > + struct mutex lock; /* protect sensor state */ > > > + u8 syscalib_mode[8]; > > > + > > > + struct ad_sigma_delta sd; > > > +}; > > > + > > > +static const char * const ad7192_syscalib_modes[] = { > > > + [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale", > > > + [AD7192_SYSCALIB_FULL_SCALE] = "full_scale", > > > +}; > > > + > > > +static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev, > > > + const struct iio_chan_spec *chan, > > > + unsigned int mode) > > > +{ > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + > > > + st->syscalib_mode[chan->channel] = mode; > > > + > > > + return 0; > > > +} > > > + > > > +static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev, > > > + const struct iio_chan_spec *chan) > > > +{ > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + > > > + return st->syscalib_mode[chan->channel]; > > > +} > > > + > > > +static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev, > > > + uintptr_t private, > > > + const struct iio_chan_spec *chan, > > > + const char *buf, size_t len) > > > +{ > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + bool sys_calib; > > > + int ret, temp; > > > + > > > + ret = strtobool(buf, &sys_calib); > > > + if (ret) > > > + return ret; > > > + > > > + temp = st->syscalib_mode[chan->channel]; > > > + if (sys_calib) { > > > + if (temp == AD7192_SYSCALIB_ZERO_SCALE) > > > + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO, > > > + chan->address); > > > + else > > > + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL, > > > + chan->address); > > > + } > > > + > > > + return ret ? ret : len; > > > +} > > > + > > > +static const struct iio_enum ad7192_syscalib_mode_enum = { > > > + .items = ad7192_syscalib_modes, > > > + .num_items = ARRAY_SIZE(ad7192_syscalib_modes), > > > + .set = ad7192_set_syscalib_mode, > > > + .get = ad7192_get_syscalib_mode > > > +}; > > > + > > > +static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = { > > > + { > > > + .name = "sys_calibration", > > > + .write = ad7192_write_syscalib, > > > + .shared = IIO_SEPARATE, > > > + }, > > > + IIO_ENUM("sys_calibration_mode", IIO_SEPARATE, > > > + &ad7192_syscalib_mode_enum), > > > + IIO_ENUM_AVAILABLE("sys_calibration_mode", &ad7192_syscalib_mode_enum), > > > + {} > > > +}; > > > + > > > +static struct ad7192_state *ad_sigma_delta_to_ad7192(struct > > > ad_sigma_delta *sd) > > > +{ > > > + return container_of(sd, struct ad7192_state, sd); > > > +} > > > + > > > +static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int > > > channel) > > > +{ > > > + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); > > > + > > > + st->conf &= ~AD7192_CONF_CHAN_MASK; > > > + st->conf |= AD7192_CONF_CHAN(channel); > > > + > > > + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > > > +} > > > + > > > +static int ad7192_set_mode(struct ad_sigma_delta *sd, > > > + enum ad_sigma_delta_mode mode) > > > +{ > > > + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); > > > + > > > + st->mode &= ~AD7192_MODE_SEL_MASK; > > > + st->mode |= AD7192_MODE_SEL(mode); > > > + > > > + return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > +} > > > + > > > +static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { > > > + .set_channel = ad7192_set_channel, > > > + .set_mode = ad7192_set_mode, > > > + .has_registers = true, > > > + .addr_shift = 3, > > > + .read_mask = BIT(6), > > > +}; > > > + > > > +static const struct ad_sd_calib_data ad7192_calib_arr[8] = { > > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1}, > > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1}, > > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2}, > > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2}, > > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3}, > > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3}, > > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4}, > > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4} > > > +}; > > > + > > > +static int ad7192_calibrate_all(struct ad7192_state *st) > > > +{ > > > + return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr, > > > + ARRAY_SIZE(ad7192_calib_arr)); > > > +} > > > + > > > +static inline bool ad7192_valid_external_frequency(u32 freq) > > > +{ > > > + return (freq >= AD7192_EXT_FREQ_MHZ_MIN && > > > + freq <= AD7192_EXT_FREQ_MHZ_MAX); > > > +} > > > + > > > +static int ad7192_of_clock_select(struct ad7192_state *st) > > > +{ > > > + struct device_node *np = st->sd.spi->dev.of_node; > > > + unsigned int clock_sel; > > > + > > > + clock_sel = AD7192_CLK_INT; > > > + > > > + /* use internal clock */ > > > + if (PTR_ERR(st->mclk) == -ENOENT) { > > > + if (of_property_read_bool(np, "adi,int-clock-output-enable")) > > > + clock_sel = AD7192_CLK_INT_CO; > > > + } else { > > > + if (of_property_read_bool(np, "adi,clock-xtal")) > > > + clock_sel = AD7192_CLK_EXT_MCLK1_2; > > > + else > > > + clock_sel = AD7192_CLK_EXT_MCLK2; > > > + } > > > + > > > + return clock_sel; > > > +} > > > + > > > +static int ad7192_setup(struct ad7192_state *st, struct device_node *np) > > > +{ > > > + struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi); > > > + bool rej60_en, refin2_en; > > > + bool buf_en, bipolar, burnout_curr_en; > > > + unsigned long long scale_uv; > > > + int i, ret, id; > > > + > > > + /* reset the serial interface */ > > > + ret = ad_sd_reset(&st->sd, 48); > > > + if (ret < 0) > > > + return ret; > > > + usleep_range(500, 1000); /* Wait for at least 500us */ > > > + > > > + /* write/read test for device presence */ > > > + ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id); > > > + if (ret) > > > + return ret; > > > + > > > + id &= AD7192_ID_MASK; > > > + > > > + if (id != st->devid) > > > + dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n", > > > + id); > > > + > > > + st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | > > > + AD7192_MODE_CLKSRC(st->clock_sel) | > > > + AD7192_MODE_RATE(480); > > > + > > > + st->conf = AD7192_CONF_GAIN(0); > > > + > > > + rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); > > > + if (rej60_en) > > > + st->mode |= AD7192_MODE_REJ60; > > > + > > > + refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable"); > > > + if (refin2_en && st->devid != ID_AD7195) > > > + st->conf |= AD7192_CONF_REFSEL; > > > + > > > + st->conf &= ~AD7192_CONF_CHOP; > > > + st->f_order = AD7192_NO_SYNC_FILTER; > > > + > > > + buf_en = of_property_read_bool(np, "adi,buffer-enable"); > > > + if (buf_en) > > > + st->conf |= AD7192_CONF_BUF; > > > + > > > + bipolar = of_property_read_bool(np, "bipolar"); > > > + if (!bipolar) > > > + st->conf |= AD7192_CONF_UNIPOLAR; > > > + > > > + burnout_curr_en = of_property_read_bool(np, > > > + "adi,burnout-currents-enable"); > > > + if (burnout_curr_en && buf_en) { > > > + st->conf |= AD7192_CONF_BURN; > > > + } else if (burnout_curr_en) { > > > + dev_warn(&st->sd.spi->dev, > > > + "Can't enable burnout currents: see CHOP or buffer\n"); > > > + } > > > + > > > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > + if (ret) > > > + return ret; > > > + > > > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > > > + if (ret) > > > + return ret; > > > + > > > + ret = ad7192_calibrate_all(st); > > > + if (ret) > > > + return ret; > > > + > > > + /* Populate available ADC input ranges */ > > > + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { > > > + scale_uv = ((u64)st->int_vref_mv * 100000000) > > > + >> (indio_dev->channels[0].scan_type.realbits - > > > + ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); > > > + scale_uv >>= i; > > > + > > > + st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; > > > + st->scale_avail[i][0] = scale_uv; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +static ssize_t ad7192_show_ac_excitation(struct device *dev, > > > + struct device_attribute *attr, > > > + char *buf) > > > +{ > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + > > > + return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); > > > +} > > > + > > > +static ssize_t ad7192_show_bridge_switch(struct device *dev, > > > + struct device_attribute *attr, > > > + char *buf) > > > +{ > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + > > > + return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); > > > +} > > > + > > > +static ssize_t ad7192_set(struct device *dev, > > > + struct device_attribute *attr, > > > + const char *buf, > > > + size_t len) > > > +{ > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); > > > + int ret; > > > + bool val; > > > + > > > + ret = strtobool(buf, &val); > > > + if (ret < 0) > > > + return ret; > > > + > > > + ret = iio_device_claim_direct_mode(indio_dev); > > > + if (ret) > > > + return ret; > > > + > > > + switch ((u32)this_attr->address) { > > > + case AD7192_REG_GPOCON: > > > + if (val) > > > + st->gpocon |= AD7192_GPOCON_BPDSW; > > > + else > > > + st->gpocon &= ~AD7192_GPOCON_BPDSW; > > > + > > > + ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon); > > > + break; > > > + case AD7192_REG_MODE: > > > + if (val) > > > + st->mode |= AD7192_MODE_ACX; > > > + else > > > + st->mode &= ~AD7192_MODE_ACX; > > > + > > > + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > + break; > > > + default: > > > + ret = -EINVAL; > > > + } > > > + > > > + iio_device_release_direct_mode(indio_dev); > > > + > > > + return ret ? ret : len; > > > +} > > > + > > > +static void ad7192_get_available_filter_freq(struct ad7192_state *st, > > > + int *freq) > > > +{ > > > + unsigned int fadc; > > > + > > > + /* Formulas for filter at page 25 of the datasheet */ > > > + fadc = DIV_ROUND_CLOSEST(st->fclk, > > > + AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st- > > > >mode)); > > > + freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); > > > + > > > + fadc = DIV_ROUND_CLOSEST(st->fclk, > > > + AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st- > > > >mode)); > > > + freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); > > > + > > > + fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); > > > + freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024); > > > + freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024); > > > +} > > > + > > > +static ssize_t ad7192_show_filter_avail(struct device *dev, > > > + struct device_attribute *attr, > > > + char *buf) > > > +{ > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + unsigned int freq_avail[4], i; > > > + size_t len = 0; > > > + > > > + ad7192_get_available_filter_freq(st, freq_avail); > > > + > > > + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) > > > + len += scnprintf(buf + len, PAGE_SIZE - len, > > > + "%d.%d ", freq_avail[i] / 1000, > > > + freq_avail[i] % 1000); > > > + > > > + buf[len - 1] = '\n'; > > > + > > > + return len; > > > +} > > > + > > > +static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available, > > > + 0444, ad7192_show_filter_avail, NULL, 0); > > > + > > > +static IIO_DEVICE_ATTR(bridge_switch_en, 0644, > > > + ad7192_show_bridge_switch, ad7192_set, > > > + AD7192_REG_GPOCON); > > > + > > > +static IIO_DEVICE_ATTR(ac_excitation_en, 0644, > > > + ad7192_show_ac_excitation, ad7192_set, > > > + AD7192_REG_MODE); > > > + > > > +static struct attribute *ad7192_attributes[] = { > > > + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, > > > + &iio_dev_attr_bridge_switch_en.dev_attr.attr, > > > + &iio_dev_attr_ac_excitation_en.dev_attr.attr, > > > + NULL > > > +}; > > > + > > > +static const struct attribute_group ad7192_attribute_group = { > > > + .attrs = ad7192_attributes, > > > +}; > > > + > > > +static struct attribute *ad7195_attributes[] = { > > > + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, > > > + &iio_dev_attr_bridge_switch_en.dev_attr.attr, > > > + NULL > > > +}; > > > + > > > +static const struct attribute_group ad7195_attribute_group = { > > > + .attrs = ad7195_attributes, > > > +}; > > > + > > > +static unsigned int ad7192_get_temp_scale(bool unipolar) > > > +{ > > > + return unipolar ? 2815 * 2 : 2815; > > > +} > > > + > > > +static int ad7192_set_3db_filter_freq(struct ad7192_state *st, > > > + int val, int val2) > > > +{ > > > + int freq_avail[4], i, ret, freq; > > > + unsigned int diff_new, diff_old; > > > + int idx = 0; > > > + > > > + diff_old = U32_MAX; > > > + freq = val * 1000 + val2; > > > + > > > + ad7192_get_available_filter_freq(st, freq_avail); > > > + > > > + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) { > > > + diff_new = abs(freq - freq_avail[i]); > > > + if (diff_new < diff_old) { > > > + diff_old = diff_new; > > > + idx = i; > > > + } > > > + } > > > + > > > + switch (idx) { > > > + case 0: > > > + st->f_order = AD7192_SYNC4_FILTER; > > > + st->mode &= ~AD7192_MODE_SINC3; > > > + > > > + st->conf |= AD7192_CONF_CHOP; > > > + break; > > > + case 1: > > > + st->f_order = AD7192_SYNC3_FILTER; > > > + st->mode |= AD7192_MODE_SINC3; > > > + > > > + st->conf |= AD7192_CONF_CHOP; > > > + break; > > > + case 2: > > > + st->f_order = AD7192_NO_SYNC_FILTER; > > > + st->mode &= ~AD7192_MODE_SINC3; > > > + > > > + st->conf &= ~AD7192_CONF_CHOP; > > > + break; > > > + case 3: > > > + st->f_order = AD7192_NO_SYNC_FILTER; > > > + st->mode |= AD7192_MODE_SINC3; > > > + > > > + st->conf &= ~AD7192_CONF_CHOP; > > > + break; > > > + } > > > + > > > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > + if (ret < 0) > > > + return ret; > > > + > > > + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > > > +} > > > + > > > +static int ad7192_get_3db_filter_freq(struct ad7192_state *st) > > > +{ > > > + unsigned int fadc; > > > + > > > + fadc = DIV_ROUND_CLOSEST(st->fclk, > > > + st->f_order * AD7192_MODE_RATE(st->mode)); > > > + > > > + if (st->conf & AD7192_CONF_CHOP) > > > + return DIV_ROUND_CLOSEST(fadc * 240, 1024); > > > + if (st->mode & AD7192_MODE_SINC3) > > > + return DIV_ROUND_CLOSEST(fadc * 272, 1024); > > > + else > > > + return DIV_ROUND_CLOSEST(fadc * 230, 1024); > > > +} > > > + > > > +static int ad7192_read_raw(struct iio_dev *indio_dev, > > > + struct iio_chan_spec const *chan, > > > + int *val, > > > + int *val2, > > > + long m) > > > +{ > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); > > > + > > > + switch (m) { > > > + case IIO_CHAN_INFO_RAW: > > > + return ad_sigma_delta_single_conversion(indio_dev, chan, val); > > > + case IIO_CHAN_INFO_SCALE: > > > + switch (chan->type) { > > > + case IIO_VOLTAGE: > > > + mutex_lock(&st->lock); > > > + *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; > > > + *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; > > > + mutex_unlock(&st->lock); > > > + return IIO_VAL_INT_PLUS_NANO; > > > + case IIO_TEMP: > > > + *val = 0; > > > + *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); > > > + return IIO_VAL_INT_PLUS_NANO; > > > + default: > > > + return -EINVAL; > > > + } > > > + case IIO_CHAN_INFO_OFFSET: > > > + if (!unipolar) > > > + *val = -(1 << (chan->scan_type.realbits - 1)); > > > + else > > > + *val = 0; > > > + /* Kelvin to Celsius */ > > > + if (chan->type == IIO_TEMP) > > > + *val -= 273 * ad7192_get_temp_scale(unipolar); > > > + return IIO_VAL_INT; > > > + case IIO_CHAN_INFO_SAMP_FREQ: > > > + *val = st->fclk / > > > + (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); > > > + return IIO_VAL_INT; > > > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > > > + *val = ad7192_get_3db_filter_freq(st); > > > + *val2 = 1000; > > > + return IIO_VAL_FRACTIONAL; > > > + } > > > + > > > + return -EINVAL; > > > +} > > > + > > > +static int ad7192_write_raw(struct iio_dev *indio_dev, > > > + struct iio_chan_spec const *chan, > > > + int val, > > > + int val2, > > > + long mask) > > > +{ > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + int ret, i, div; > > > + unsigned int tmp; > > > + > > > + ret = iio_device_claim_direct_mode(indio_dev); > > > + if (ret) > > > + return ret; > > > + > > > + switch (mask) { > > > + case IIO_CHAN_INFO_SCALE: > > > + ret = -EINVAL; > > > + mutex_lock(&st->lock); > > > + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) > > > + if (val2 == st->scale_avail[i][1]) { > > > + ret = 0; > > > + tmp = st->conf; > > > + st->conf &= ~AD7192_CONF_GAIN(-1); > > > + st->conf |= AD7192_CONF_GAIN(i); > > > + if (tmp == st->conf) > > > + break; > > > + ad_sd_write_reg(&st->sd, AD7192_REG_CONF, > > > + 3, st->conf); > > > + ad7192_calibrate_all(st); > > > + break; > > > + } > > > + mutex_unlock(&st->lock); > > > + break; > > > + case IIO_CHAN_INFO_SAMP_FREQ: > > > + if (!val) { > > > + ret = -EINVAL; > > > + break; > > > + } > > > + > > > + div = st->fclk / (val * st->f_order * 1024); > > > + if (div < 1 || div > 1023) { > > > + ret = -EINVAL; > > > + break; > > > + } > > > + > > > + st->mode &= ~AD7192_MODE_RATE(-1); > > > + st->mode |= AD7192_MODE_RATE(div); > > > + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > + break; > > > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > > > + ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000); > > > + break; > > > + default: > > > + ret = -EINVAL; > > > + } > > > + > > > + iio_device_release_direct_mode(indio_dev); > > > + > > > + return ret; > > > +} > > > + > > > +static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, > > > + struct iio_chan_spec const *chan, > > > + long mask) > > > +{ > > > + switch (mask) { > > > + case IIO_CHAN_INFO_SCALE: > > > + return IIO_VAL_INT_PLUS_NANO; > > > + case IIO_CHAN_INFO_SAMP_FREQ: > > > + return IIO_VAL_INT; > > > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > > > + return IIO_VAL_INT_PLUS_MICRO; > > > + default: > > > + return -EINVAL; > > > + } > > > +} > > > + > > > +static int ad7192_read_avail(struct iio_dev *indio_dev, > > > + struct iio_chan_spec const *chan, > > > + const int **vals, int *type, int *length, > > > + long mask) > > > +{ > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + > > > + switch (mask) { > > > + case IIO_CHAN_INFO_SCALE: > > > + *vals = (int *)st->scale_avail; > > > + *type = IIO_VAL_INT_PLUS_NANO; > > > + /* Values are stored in a 2D matrix */ > > > + *length = ARRAY_SIZE(st->scale_avail) * 2; > > > + > > > + return IIO_AVAIL_LIST; > > > + } > > > + > > > + return -EINVAL; > > > +} > > > + > > > +static const struct iio_info ad7192_info = { > > > + .read_raw = ad7192_read_raw, > > > + .write_raw = ad7192_write_raw, > > > + .write_raw_get_fmt = ad7192_write_raw_get_fmt, > > > + .read_avail = ad7192_read_avail, > > > + .attrs = &ad7192_attribute_group, > > > + .validate_trigger = ad_sd_validate_trigger, > > > +}; > > > + > > > +static const struct iio_info ad7195_info = { > > > + .read_raw = ad7192_read_raw, > > > + .write_raw = ad7192_write_raw, > > > + .write_raw_get_fmt = ad7192_write_raw_get_fmt, > > > + .read_avail = ad7192_read_avail, > > > + .attrs = &ad7195_attribute_group, > > > + .validate_trigger = ad_sd_validate_trigger, > > > +}; > > > + > > > +#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, > > > _extend_name, \ > > > + _type, _mask_type_av, _ext_info) \ > > > + { \ > > > + .type = (_type), \ > > > + .differential = ((_channel2) == -1 ? 0 : 1), \ > > > + .indexed = 1, \ > > > + .channel = (_channel1), \ > > > + .channel2 = (_channel2), \ > > > + .address = (_address), \ > > > + .extend_name = (_extend_name), \ > > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > > > + BIT(IIO_CHAN_INFO_OFFSET), \ > > > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > > > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ > > > + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ > > > + .info_mask_shared_by_type_available = (_mask_type_av), \ > > > + .ext_info = (_ext_info), \ > > > + .scan_index = (_si), \ > > > + .scan_type = { \ > > > + .sign = 'u', \ > > > + .realbits = 24, \ > > > + .storagebits = 32, \ > > > + .endianness = IIO_BE, \ > > > + }, \ > > > + } > > > + > > > +#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ > > > + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \ > > > + IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \ > > > + ad7192_calibsys_ext_info) > > > + > > > +#define AD719x_CHANNEL(_si, _channel1, _address) \ > > > + __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \ > > > + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) > > > + > > > +#define AD719x_SHORTED_CHANNEL(_si, _channel1, _address) \ > > > + __AD719x_CHANNEL(_si, _channel1, -1, _address, "shorted", IIO_VOLTAGE, \ > > > + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) > > > + > > > +#define AD719x_TEMP_CHANNEL(_si, _address) \ > > > + __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL) > > > + > > > +static const struct iio_chan_spec ad7192_channels[] = { > > > + AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M), > > > + AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M), > > > + AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP), > > > + AD719x_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M), > > > + AD719x_CHANNEL(4, 1, AD7192_CH_AIN1), > > > + AD719x_CHANNEL(5, 2, AD7192_CH_AIN2), > > > + AD719x_CHANNEL(6, 3, AD7192_CH_AIN3), > > > + AD719x_CHANNEL(7, 4, AD7192_CH_AIN4), > > > + IIO_CHAN_SOFT_TIMESTAMP(8), > > > +}; > > > + > > > +static const struct iio_chan_spec ad7193_channels[] = { > > > + AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), > > > + AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), > > > + AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), > > > + AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), > > > + AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP), > > > + AD719x_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M), > > > + AD719x_CHANNEL(6, 1, AD7193_CH_AIN1), > > > + AD719x_CHANNEL(7, 2, AD7193_CH_AIN2), > > > + AD719x_CHANNEL(8, 3, AD7193_CH_AIN3), > > > + AD719x_CHANNEL(9, 4, AD7193_CH_AIN4), > > > + AD719x_CHANNEL(10, 5, AD7193_CH_AIN5), > > > + AD719x_CHANNEL(11, 6, AD7193_CH_AIN6), > > > + AD719x_CHANNEL(12, 7, AD7193_CH_AIN7), > > > + AD719x_CHANNEL(13, 8, AD7193_CH_AIN8), > > > + IIO_CHAN_SOFT_TIMESTAMP(14), > > > +}; > > > + > > > +static int ad7192_channels_config(struct iio_dev *indio_dev) > > > +{ > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + > > > + switch (st->devid) { > > > + case ID_AD7193: > > > + indio_dev->channels = ad7193_channels; > > > + indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); > > > + break; > > > + default: > > > + indio_dev->channels = ad7192_channels; > > > + indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); > > > + break; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +static const struct of_device_id ad7192_of_match[]; > > > + > > > +static int ad7192_probe(struct spi_device *spi) > > > +{ > > > + const struct of_device_id *match; > > > + struct ad7192_state *st; > > > + struct iio_dev *indio_dev; > > > + int ret, voltage_uv = 0; > > > + > > > + if (!spi->irq) { > > > + dev_err(&spi->dev, "no IRQ?\n"); > > > + return -ENODEV; > > > + } > > > + > > > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); > > > + if (!indio_dev) > > > + return -ENOMEM; > > > + > > > + st = iio_priv(indio_dev); > > > + > > > + mutex_init(&st->lock); > > > + > > > + st->avdd = devm_regulator_get(&spi->dev, "avdd"); > > > + if (IS_ERR(st->avdd)) > > > + return PTR_ERR(st->avdd); > > > + > > > + ret = regulator_enable(st->avdd); > > > + if (ret) { > > > + dev_err(&spi->dev, "Failed to enable specified AVdd supply\n"); > > > + return ret; > > > + } > > > + > > > + st->dvdd = devm_regulator_get(&spi->dev, "dvdd"); > > > + if (IS_ERR(st->dvdd)) { > > > + ret = PTR_ERR(st->dvdd); > > > + goto error_disable_avdd; > > > + } > > > + > > > + ret = regulator_enable(st->dvdd); > > > + if (ret) { > > > + dev_err(&spi->dev, "Failed to enable specified DVdd supply\n"); > > > + goto error_disable_avdd; > > > + } > > > + > > > + voltage_uv = regulator_get_voltage(st->avdd); > > > + > > > + if (voltage_uv) { > > > + st->int_vref_mv = voltage_uv / 1000; > > > + } else { > > > + ret = voltage_uv; > > > + dev_err(&spi->dev, "Device tree error, reference voltage > > > undefined\n"); > > > + goto error_disable_avdd; > > > + } > > > + > > > + match = of_match_device(ad7192_of_match, &spi->dev); > > > + if (!match) > > > + return -EINVAL; > > > + > > > + spi_set_drvdata(spi, indio_dev); > > > + st->devid = (unsigned long)match->data; > > > + indio_dev->dev.parent = &spi->dev; > > > + indio_dev->name = spi_get_device_id(spi)->name; > > > + indio_dev->modes = INDIO_DIRECT_MODE; > > > + > > > + ret = ad7192_channels_config(indio_dev); > > > + if (ret < 0) > > > + goto error_disable_dvdd; > > > + > > > + if (st->devid == ID_AD7195) > > > + indio_dev->info = &ad7195_info; > > > + else > > > + indio_dev->info = &ad7192_info; > > > + > > > + ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info); > > > + > > > + ret = ad_sd_setup_buffer_and_trigger(indio_dev); > > > + if (ret) > > > + goto error_disable_dvdd; > > > + > > > + st->fclk = AD7192_INT_FREQ_MHZ; > > > + > > > + st->mclk = devm_clk_get(&st->sd.spi->dev, "mclk"); > > > + if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) { > > > + ret = PTR_ERR(st->mclk); > > > + goto error_remove_trigger; > > > + } > > > + > > > + st->clock_sel = ad7192_of_clock_select(st); > > > + > > > + if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 || > > > + st->clock_sel == AD7192_CLK_EXT_MCLK2) { > > > + ret = clk_prepare_enable(st->mclk); > > > + if (ret < 0) > > > + goto error_remove_trigger; > > > + > > > + st->fclk = clk_get_rate(st->mclk); > > > + if (!ad7192_valid_external_frequency(st->fclk)) { > > > + ret = -EINVAL; > > > + dev_err(&spi->dev, > > > + "External clock frequency out of bounds\n"); > > > + goto error_disable_clk; > > > + } > > > + } > > > + > > > + ret = ad7192_setup(st, spi->dev.of_node); > > > + if (ret) > > > + goto error_disable_clk; > > > + > > > + ret = iio_device_register(indio_dev); > > > + if (ret < 0) > > > + goto error_disable_clk; > > > + > > > + return 0; > > > + > > > +error_disable_clk: > > > + clk_disable_unprepare(st->mclk); > > > +error_remove_trigger: > > > + ad_sd_cleanup_buffer_and_trigger(indio_dev); > > > +error_disable_dvdd: > > > + regulator_disable(st->dvdd); > > > +error_disable_avdd: > > > + regulator_disable(st->avdd); > > > + > > > + return ret; > > > +} > > > + > > > +static int ad7192_remove(struct spi_device *spi) > > > +{ > > > + struct iio_dev *indio_dev = spi_get_drvdata(spi); > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > + > > > + iio_device_unregister(indio_dev); > > > + clk_disable_unprepare(st->mclk); > > > + ad_sd_cleanup_buffer_and_trigger(indio_dev); > > > + > > > + regulator_disable(st->dvdd); > > > + regulator_disable(st->avdd); > > > + > > > + return 0; > > > +} > > > + > > > +static const struct of_device_id ad7192_of_match[] = { > > > + { .compatible = "adi,ad7190", .data = (void *)ID_AD7190}, > > > + { .compatible = "adi,ad7192", .data = (void *)ID_AD7192 }, > > > + { .compatible = "adi,ad7193", .data = (void *)ID_AD7193 }, > > > + { .compatible = "adi,ad7195", .data = (void *)ID_AD7195 }, > > > + {} > > > +}; > > > + > > > +MODULE_DEVICE_TABLE(of, ad7192_of_match); > > > + > > > +static struct spi_driver ad7192_driver = { > > > + .driver = { > > > + .name = "ad7192", > > > + .of_match_table = ad7192_of_match, > > > + }, > > > + .probe = ad7192_probe, > > > + .remove = ad7192_remove, > > > +}; > > > +module_spi_driver(ad7192_driver); > > > + > > > +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); > > > +MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC"); > > > +MODULE_LICENSE("GPL v2");
On Mon, 10 Feb 2020 06:43:16 +0000 "Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote: > On Thu, 2020-02-06 at 10:20 +0000, Jonathan Cameron wrote: > > [External] > > > > On Thu, 6 Feb 2020 10:10:48 +0000 > > Jonathan Cameron <jic23@kernel.org> wrote: > > > > > On Wed, 5 Feb 2020 19:15:11 +0200 > > > Alexandru Tachici <alexandru.tachici@analog.com> wrote: > > > > > > > Move ad7192 ADC driver out of staging into mainline. > > > > > > > > Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> > > > > > > Nice. To my eyes only remaining bits are the minor tweaks in earlier > > > patches in this series. > > > > > > If anyone else has time to look at this one that would be great of > > > course! > > > > > > Only 2 more ADC drivers to go in staging after this one :) > > Speaking of which: > > > > ad7816 is obsolete so up to Analog to decide if you want to deal with it > > or just drop the driver. Doesn't look like it would take a 'lot' > > to drag that one into the modern age, but if no one has hardware to > > test... > > ad7816 is obsolete; > but the driver supports ad7817 & ad8718, which are still in production; Ah fair enough. I'd missed that. > > > > > ad7280a needs events interface bringing up to date and there are a few > > bits of custom ABI that need documenting and might need slighty tweaking. > > Looks easy enough so I'll cross my fingers you or one of the Analog team > > can get that one sorted in near future ;) > > [no promises about dates] > would ad7280a be better suited for hwmon/pmbus? > the datasheet mentions it as a Lithium Ion Battery Monitoring System > > > i'm asking now, as this may be a question that could pop-up later; Probably not. The thing is, when it says Lithium Ion Battery monitoring, it's talking for electric cars not laptops. The total voltage range supported by this in a stack of cells is enormous. It was a long time back but I think we had that exact discussion when it was originally posted. > > > > > Thanks, > > > > Jonathan > > > > > Thanks, > > > > > > Jonathan > > > > > > > --- > > > > MAINTAINERS | 8 + > > > > drivers/iio/adc/Kconfig | 12 + > > > > drivers/iio/adc/Makefile | 1 + > > > > drivers/iio/adc/ad7192.c | 1043 ++++++++++++++++++++++++++++++ > > > > drivers/staging/iio/adc/Kconfig | 12 - > > > > drivers/staging/iio/adc/Makefile | 1 - > > > > drivers/staging/iio/adc/ad7192.c | 1043 ------------------------------ > > > > 7 files changed, 1064 insertions(+), 1056 deletions(-) > > > > create mode 100644 drivers/iio/adc/ad7192.c > > > > delete mode 100644 drivers/staging/iio/adc/ad7192.c > > > > > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > > index e699fe378e71..c82bdb31e2fb 100644 > > > > --- a/MAINTAINERS > > > > +++ b/MAINTAINERS > > > > @@ -922,6 +922,14 @@ S: Supported > > > > F: drivers/iio/adc/ad7124.c > > > > F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml > > > > > > > > +ANALOG DEVICES INC AD7192 DRIVER > > > > +M: Alexandru Tachici <alexandru.tachici@analog.com> > > > > +L: linux-iio@vger.kernel.org > > > > +W: http://ez.analog.com/community/linux-device-drivers > > > > +S: Supported > > > > +F: drivers/iio/adc/ad7192.c > > > > +F: Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml > > > > + > > > > ANALOG DEVICES INC AD7292 DRIVER > > > > M: Marcelo Schmitt <marcelo.schmitt1@gmail.com> > > > > L: linux-iio@vger.kernel.org > > > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > > > > index 82e33082958c..f4da821c4022 100644 > > > > --- a/drivers/iio/adc/Kconfig > > > > +++ b/drivers/iio/adc/Kconfig > > > > @@ -39,6 +39,18 @@ config AD7124 > > > > To compile this driver as a module, choose M here: the module will be > > > > called ad7124. > > > > > > > > +config AD7192 > > > > + tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" > > > > + depends on SPI > > > > + select AD_SIGMA_DELTA > > > > + help > > > > + Say yes here to build support for Analog Devices AD7190, > > > > + AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). > > > > + If unsure, say N (but it's safe to say "Y"). > > > > + > > > > + To compile this driver as a module, choose M here: the > > > > + module will be called ad7192. > > > > + > > > > config AD7266 > > > > tristate "Analog Devices AD7265/AD7266 ADC driver" > > > > depends on SPI_MASTER > > > > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > > > > index 919228900df9..8462455b4228 100644 > > > > --- a/drivers/iio/adc/Makefile > > > > +++ b/drivers/iio/adc/Makefile > > > > @@ -8,6 +8,7 @@ obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o > > > > obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o > > > > obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o > > > > obj-$(CONFIG_AD7124) += ad7124.o > > > > +obj-$(CONFIG_AD7192) += ad7192.o > > > > obj-$(CONFIG_AD7266) += ad7266.o > > > > obj-$(CONFIG_AD7291) += ad7291.o > > > > obj-$(CONFIG_AD7292) += ad7292.o > > > > diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c > > > > new file mode 100644 > > > > index 000000000000..e75d808a2f41 > > > > --- /dev/null > > > > +++ b/drivers/iio/adc/ad7192.c > > > > @@ -0,0 +1,1043 @@ > > > > +// SPDX-License-Identifier: GPL-2.0 > > > > +/* > > > > + * AD7190 AD7192 AD7193 AD7195 SPI ADC driver > > > > + * > > > > + * Copyright 2011-2015 Analog Devices Inc. > > > > + */ > > > > + > > > > +#include <linux/interrupt.h> > > > > +#include <linux/clk.h> > > > > +#include <linux/device.h> > > > > +#include <linux/kernel.h> > > > > +#include <linux/slab.h> > > > > +#include <linux/sysfs.h> > > > > +#include <linux/spi/spi.h> > > > > +#include <linux/regulator/consumer.h> > > > > +#include <linux/err.h> > > > > +#include <linux/sched.h> > > > > +#include <linux/delay.h> > > > > +#include <linux/of_device.h> > > > > + > > > > +#include <linux/iio/iio.h> > > > > +#include <linux/iio/sysfs.h> > > > > +#include <linux/iio/buffer.h> > > > > +#include <linux/iio/trigger.h> > > > > +#include <linux/iio/trigger_consumer.h> > > > > +#include <linux/iio/triggered_buffer.h> > > > > +#include <linux/iio/adc/ad_sigma_delta.h> > > > > + > > > > +/* Registers */ > > > > +#define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) > > > > */ > > > > +#define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) > > > > */ > > > > +#define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit > > > > */ > > > > +#define AD7192_REG_CONF 2 /* Configuration Register (RW, 24- > > > > bit) */ > > > > +#define AD7192_REG_DATA 3 /* Data Register (RO, 24/32- > > > > bit) */ > > > > +#define AD7192_REG_ID 4 /* ID Register (RO, 8-bit) > > > > */ > > > > +#define AD7192_REG_GPOCON 5 /* GPOCON Register (RO, 8-bit) > > > > */ > > > > +#define AD7192_REG_OFFSET 6 /* Offset Register (RW, 16-bit > > > > */ > > > > + /* (AD7792)/24-bit (AD7192)) */ > > > > +#define AD7192_REG_FULLSALE 7 /* Full-Scale Register */ > > > > + /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */ > > > > + > > > > +/* Communications Register Bit Designations (AD7192_REG_COMM) */ > > > > +#define AD7192_COMM_WEN BIT(7) /* Write Enable */ > > > > +#define AD7192_COMM_WRITE 0 /* Write Operation */ > > > > +#define AD7192_COMM_READ BIT(6) /* Read Operation */ > > > > +#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address > > > > */ > > > > +#define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data > > > > Register */ > > > > + > > > > +/* Status Register Bit Designations (AD7192_REG_STAT) */ > > > > +#define AD7192_STAT_RDY BIT(7) /* Ready */ > > > > +#define AD7192_STAT_ERR BIT(6) /* Error (Overrange, Underrange) > > > > */ > > > > +#define AD7192_STAT_NOREF BIT(5) /* Error no external reference */ > > > > +#define AD7192_STAT_PARITY BIT(4) /* Parity */ > > > > +#define AD7192_STAT_CH3 BIT(2) /* Channel 3 */ > > > > +#define AD7192_STAT_CH2 BIT(1) /* Channel 2 */ > > > > +#define AD7192_STAT_CH1 BIT(0) /* Channel 1 */ > > > > + > > > > +/* Mode Register Bit Designations (AD7192_REG_MODE) */ > > > > +#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode > > > > Select */ > > > > +#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select > > > > Mask */ > > > > +#define AD7192_MODE_DAT_STA BIT(20) /* Status Register transmission > > > > */ > > > > +#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source > > > > Select */ > > > > +#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ > > > > +#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 > > > > only)*/ > > > > +#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ > > > > +#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 > > > > only)*/ > > > > +#define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ > > > > +#define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */ > > > > +#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate > > > > Select */ > > > > + > > > > +/* Mode Register: AD7192_MODE_SEL options */ > > > > +#define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ > > > > +#define AD7192_MODE_SINGLE 1 /* Single Conversion Mode */ > > > > +#define AD7192_MODE_IDLE 2 /* Idle Mode */ > > > > +#define AD7192_MODE_PWRDN 3 /* Power-Down Mode */ > > > > +#define AD7192_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ > > > > +#define AD7192_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ > > > > +#define AD7192_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ > > > > +#define AD7192_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ > > > > + > > > > +/* Mode Register: AD7192_MODE_CLKSRC options */ > > > > +#define AD7192_CLK_EXT_MCLK1_2 0 /* External 4.92 MHz Clock > > > > connected*/ > > > > + /* from MCLK1 to MCLK2 */ > > > > +#define AD7192_CLK_EXT_MCLK2 1 /* External Clock applied to > > > > MCLK2 */ > > > > +#define AD7192_CLK_INT 2 /* Internal 4.92 MHz Clock not > > > > */ > > > > + /* available at the MCLK2 pin */ > > > > +#define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock > > > > available*/ > > > > + /* at the MCLK2 pin */ > > > > + > > > > +/* Configuration Register Bit Designations (AD7192_REG_CONF) */ > > > > + > > > > +#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ > > > > +#define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference > > > > Select */ > > > > +#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ > > > > +#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ > > > > +#define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ > > > > +#define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ > > > > +#define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ > > > > +#define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ > > > > +#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ > > > > + > > > > +#define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ > > > > +#define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ > > > > +#define AD7192_CH_TEMP BIT(2) /* Temp Sensor */ > > > > +#define AD7192_CH_AIN2P_AIN2M BIT(3) /* AIN2(+) - AIN2(-) */ > > > > +#define AD7192_CH_AIN1 BIT(4) /* AIN1 - AINCOM */ > > > > +#define AD7192_CH_AIN2 BIT(5) /* AIN2 - AINCOM */ > > > > +#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */ > > > > +#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */ > > > > + > > > > +#define AD7193_CH_AIN1P_AIN2M 0x001 /* AIN1(+) - AIN2(-) */ > > > > +#define AD7193_CH_AIN3P_AIN4M 0x002 /* AIN3(+) - AIN4(-) */ > > > > +#define AD7193_CH_AIN5P_AIN6M 0x004 /* AIN5(+) - AIN6(-) */ > > > > +#define AD7193_CH_AIN7P_AIN8M 0x008 /* AIN7(+) - AIN8(-) */ > > > > +#define AD7193_CH_TEMP 0x100 /* Temp senseor */ > > > > +#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */ > > > > +#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */ > > > > +#define AD7193_CH_AIN2 0x402 /* AIN2 - AINCOM */ > > > > +#define AD7193_CH_AIN3 0x404 /* AIN3 - AINCOM */ > > > > +#define AD7193_CH_AIN4 0x408 /* AIN4 - AINCOM */ > > > > +#define AD7193_CH_AIN5 0x410 /* AIN5 - AINCOM */ > > > > +#define AD7193_CH_AIN6 0x420 /* AIN6 - AINCOM */ > > > > +#define AD7193_CH_AIN7 0x440 /* AIN7 - AINCOM */ > > > > +#define AD7193_CH_AIN8 0x480 /* AIN7 - AINCOM */ > > > > +#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */ > > > > + > > > > +/* ID Register Bit Designations (AD7192_REG_ID) */ > > > > +#define ID_AD7190 0x4 > > > > +#define ID_AD7192 0x0 > > > > +#define ID_AD7193 0x2 > > > > +#define ID_AD7195 0x6 > > > > +#define AD7192_ID_MASK 0x0F > > > > + > > > > +/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ > > > > +#define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch > > > > enable */ > > > > +#define AD7192_GPOCON_GP32EN BIT(5) /* Digital Output P3 and P2 > > > > enable */ > > > > +#define AD7192_GPOCON_GP10EN BIT(4) /* Digital Output P1 and P0 > > > > enable */ > > > > +#define AD7192_GPOCON_P3DAT BIT(3) /* P3 state */ > > > > +#define AD7192_GPOCON_P2DAT BIT(2) /* P2 state */ > > > > +#define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */ > > > > +#define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */ > > > > + > > > > +#define AD7192_EXT_FREQ_MHZ_MIN 2457600 > > > > +#define AD7192_EXT_FREQ_MHZ_MAX 5120000 > > > > +#define AD7192_INT_FREQ_MHZ 4915200 > > > > + > > > > +#define AD7192_NO_SYNC_FILTER 1 > > > > +#define AD7192_SYNC3_FILTER 3 > > > > +#define AD7192_SYNC4_FILTER 4 > > > > + > > > > +/* NOTE: > > > > + * The AD7190/2/5 features a dual use data out ready DOUT/RDY output. > > > > + * In order to avoid contentions on the SPI bus, it's therefore necessary > > > > + * to use spi bus locking. > > > > + * > > > > + * The DOUT/RDY output must also be wired to an interrupt capable GPIO. > > > > + */ > > > > + > > > > +enum { > > > > + AD7192_SYSCALIB_ZERO_SCALE, > > > > + AD7192_SYSCALIB_FULL_SCALE, > > > > +}; > > > > + > > > > +struct ad7192_state { > > > > + struct regulator *avdd; > > > > + struct regulator *dvdd; > > > > + struct clk *mclk; > > > > + u16 int_vref_mv; > > > > + u32 fclk; > > > > + u32 f_order; > > > > + u32 mode; > > > > + u32 conf; > > > > + u32 scale_avail[8][2]; > > > > + u8 gpocon; > > > > + u8 devid; > > > > + u8 clock_sel; > > > > + struct mutex lock; /* protect sensor state */ > > > > + u8 syscalib_mode[8]; > > > > + > > > > + struct ad_sigma_delta sd; > > > > +}; > > > > + > > > > +static const char * const ad7192_syscalib_modes[] = { > > > > + [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale", > > > > + [AD7192_SYSCALIB_FULL_SCALE] = "full_scale", > > > > +}; > > > > + > > > > +static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev, > > > > + const struct iio_chan_spec *chan, > > > > + unsigned int mode) > > > > +{ > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + > > > > + st->syscalib_mode[chan->channel] = mode; > > > > + > > > > + return 0; > > > > +} > > > > + > > > > +static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev, > > > > + const struct iio_chan_spec *chan) > > > > +{ > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + > > > > + return st->syscalib_mode[chan->channel]; > > > > +} > > > > + > > > > +static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev, > > > > + uintptr_t private, > > > > + const struct iio_chan_spec *chan, > > > > + const char *buf, size_t len) > > > > +{ > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + bool sys_calib; > > > > + int ret, temp; > > > > + > > > > + ret = strtobool(buf, &sys_calib); > > > > + if (ret) > > > > + return ret; > > > > + > > > > + temp = st->syscalib_mode[chan->channel]; > > > > + if (sys_calib) { > > > > + if (temp == AD7192_SYSCALIB_ZERO_SCALE) > > > > + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO, > > > > + chan->address); > > > > + else > > > > + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL, > > > > + chan->address); > > > > + } > > > > + > > > > + return ret ? ret : len; > > > > +} > > > > + > > > > +static const struct iio_enum ad7192_syscalib_mode_enum = { > > > > + .items = ad7192_syscalib_modes, > > > > + .num_items = ARRAY_SIZE(ad7192_syscalib_modes), > > > > + .set = ad7192_set_syscalib_mode, > > > > + .get = ad7192_get_syscalib_mode > > > > +}; > > > > + > > > > +static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = { > > > > + { > > > > + .name = "sys_calibration", > > > > + .write = ad7192_write_syscalib, > > > > + .shared = IIO_SEPARATE, > > > > + }, > > > > + IIO_ENUM("sys_calibration_mode", IIO_SEPARATE, > > > > + &ad7192_syscalib_mode_enum), > > > > + IIO_ENUM_AVAILABLE("sys_calibration_mode", &ad7192_syscalib_mode_enum), > > > > + {} > > > > +}; > > > > + > > > > +static struct ad7192_state *ad_sigma_delta_to_ad7192(struct > > > > ad_sigma_delta *sd) > > > > +{ > > > > + return container_of(sd, struct ad7192_state, sd); > > > > +} > > > > + > > > > +static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int > > > > channel) > > > > +{ > > > > + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); > > > > + > > > > + st->conf &= ~AD7192_CONF_CHAN_MASK; > > > > + st->conf |= AD7192_CONF_CHAN(channel); > > > > + > > > > + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > > > > +} > > > > + > > > > +static int ad7192_set_mode(struct ad_sigma_delta *sd, > > > > + enum ad_sigma_delta_mode mode) > > > > +{ > > > > + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); > > > > + > > > > + st->mode &= ~AD7192_MODE_SEL_MASK; > > > > + st->mode |= AD7192_MODE_SEL(mode); > > > > + > > > > + return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > > +} > > > > + > > > > +static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { > > > > + .set_channel = ad7192_set_channel, > > > > + .set_mode = ad7192_set_mode, > > > > + .has_registers = true, > > > > + .addr_shift = 3, > > > > + .read_mask = BIT(6), > > > > +}; > > > > + > > > > +static const struct ad_sd_calib_data ad7192_calib_arr[8] = { > > > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1}, > > > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1}, > > > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2}, > > > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2}, > > > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3}, > > > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3}, > > > > + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4}, > > > > + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4} > > > > +}; > > > > + > > > > +static int ad7192_calibrate_all(struct ad7192_state *st) > > > > +{ > > > > + return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr, > > > > + ARRAY_SIZE(ad7192_calib_arr)); > > > > +} > > > > + > > > > +static inline bool ad7192_valid_external_frequency(u32 freq) > > > > +{ > > > > + return (freq >= AD7192_EXT_FREQ_MHZ_MIN && > > > > + freq <= AD7192_EXT_FREQ_MHZ_MAX); > > > > +} > > > > + > > > > +static int ad7192_of_clock_select(struct ad7192_state *st) > > > > +{ > > > > + struct device_node *np = st->sd.spi->dev.of_node; > > > > + unsigned int clock_sel; > > > > + > > > > + clock_sel = AD7192_CLK_INT; > > > > + > > > > + /* use internal clock */ > > > > + if (PTR_ERR(st->mclk) == -ENOENT) { > > > > + if (of_property_read_bool(np, "adi,int-clock-output-enable")) > > > > + clock_sel = AD7192_CLK_INT_CO; > > > > + } else { > > > > + if (of_property_read_bool(np, "adi,clock-xtal")) > > > > + clock_sel = AD7192_CLK_EXT_MCLK1_2; > > > > + else > > > > + clock_sel = AD7192_CLK_EXT_MCLK2; > > > > + } > > > > + > > > > + return clock_sel; > > > > +} > > > > + > > > > +static int ad7192_setup(struct ad7192_state *st, struct device_node *np) > > > > +{ > > > > + struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi); > > > > + bool rej60_en, refin2_en; > > > > + bool buf_en, bipolar, burnout_curr_en; > > > > + unsigned long long scale_uv; > > > > + int i, ret, id; > > > > + > > > > + /* reset the serial interface */ > > > > + ret = ad_sd_reset(&st->sd, 48); > > > > + if (ret < 0) > > > > + return ret; > > > > + usleep_range(500, 1000); /* Wait for at least 500us */ > > > > + > > > > + /* write/read test for device presence */ > > > > + ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id); > > > > + if (ret) > > > > + return ret; > > > > + > > > > + id &= AD7192_ID_MASK; > > > > + > > > > + if (id != st->devid) > > > > + dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n", > > > > + id); > > > > + > > > > + st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | > > > > + AD7192_MODE_CLKSRC(st->clock_sel) | > > > > + AD7192_MODE_RATE(480); > > > > + > > > > + st->conf = AD7192_CONF_GAIN(0); > > > > + > > > > + rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); > > > > + if (rej60_en) > > > > + st->mode |= AD7192_MODE_REJ60; > > > > + > > > > + refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable"); > > > > + if (refin2_en && st->devid != ID_AD7195) > > > > + st->conf |= AD7192_CONF_REFSEL; > > > > + > > > > + st->conf &= ~AD7192_CONF_CHOP; > > > > + st->f_order = AD7192_NO_SYNC_FILTER; > > > > + > > > > + buf_en = of_property_read_bool(np, "adi,buffer-enable"); > > > > + if (buf_en) > > > > + st->conf |= AD7192_CONF_BUF; > > > > + > > > > + bipolar = of_property_read_bool(np, "bipolar"); > > > > + if (!bipolar) > > > > + st->conf |= AD7192_CONF_UNIPOLAR; > > > > + > > > > + burnout_curr_en = of_property_read_bool(np, > > > > + "adi,burnout-currents-enable"); > > > > + if (burnout_curr_en && buf_en) { > > > > + st->conf |= AD7192_CONF_BURN; > > > > + } else if (burnout_curr_en) { > > > > + dev_warn(&st->sd.spi->dev, > > > > + "Can't enable burnout currents: see CHOP or buffer\n"); > > > > + } > > > > + > > > > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > > + if (ret) > > > > + return ret; > > > > + > > > > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > > > > + if (ret) > > > > + return ret; > > > > + > > > > + ret = ad7192_calibrate_all(st); > > > > + if (ret) > > > > + return ret; > > > > + > > > > + /* Populate available ADC input ranges */ > > > > + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { > > > > + scale_uv = ((u64)st->int_vref_mv * 100000000) > > > > + >> (indio_dev->channels[0].scan_type.realbits - > > > > + ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); > > > > + scale_uv >>= i; > > > > + > > > > + st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; > > > > + st->scale_avail[i][0] = scale_uv; > > > > + } > > > > + > > > > + return 0; > > > > +} > > > > + > > > > +static ssize_t ad7192_show_ac_excitation(struct device *dev, > > > > + struct device_attribute *attr, > > > > + char *buf) > > > > +{ > > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + > > > > + return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); > > > > +} > > > > + > > > > +static ssize_t ad7192_show_bridge_switch(struct device *dev, > > > > + struct device_attribute *attr, > > > > + char *buf) > > > > +{ > > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + > > > > + return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); > > > > +} > > > > + > > > > +static ssize_t ad7192_set(struct device *dev, > > > > + struct device_attribute *attr, > > > > + const char *buf, > > > > + size_t len) > > > > +{ > > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); > > > > + int ret; > > > > + bool val; > > > > + > > > > + ret = strtobool(buf, &val); > > > > + if (ret < 0) > > > > + return ret; > > > > + > > > > + ret = iio_device_claim_direct_mode(indio_dev); > > > > + if (ret) > > > > + return ret; > > > > + > > > > + switch ((u32)this_attr->address) { > > > > + case AD7192_REG_GPOCON: > > > > + if (val) > > > > + st->gpocon |= AD7192_GPOCON_BPDSW; > > > > + else > > > > + st->gpocon &= ~AD7192_GPOCON_BPDSW; > > > > + > > > > + ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon); > > > > + break; > > > > + case AD7192_REG_MODE: > > > > + if (val) > > > > + st->mode |= AD7192_MODE_ACX; > > > > + else > > > > + st->mode &= ~AD7192_MODE_ACX; > > > > + > > > > + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > > + break; > > > > + default: > > > > + ret = -EINVAL; > > > > + } > > > > + > > > > + iio_device_release_direct_mode(indio_dev); > > > > + > > > > + return ret ? ret : len; > > > > +} > > > > + > > > > +static void ad7192_get_available_filter_freq(struct ad7192_state *st, > > > > + int *freq) > > > > +{ > > > > + unsigned int fadc; > > > > + > > > > + /* Formulas for filter at page 25 of the datasheet */ > > > > + fadc = DIV_ROUND_CLOSEST(st->fclk, > > > > + AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st- > > > > >mode)); > > > > + freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); > > > > + > > > > + fadc = DIV_ROUND_CLOSEST(st->fclk, > > > > + AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st- > > > > >mode)); > > > > + freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); > > > > + > > > > + fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); > > > > + freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024); > > > > + freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024); > > > > +} > > > > + > > > > +static ssize_t ad7192_show_filter_avail(struct device *dev, > > > > + struct device_attribute *attr, > > > > + char *buf) > > > > +{ > > > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + unsigned int freq_avail[4], i; > > > > + size_t len = 0; > > > > + > > > > + ad7192_get_available_filter_freq(st, freq_avail); > > > > + > > > > + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) > > > > + len += scnprintf(buf + len, PAGE_SIZE - len, > > > > + "%d.%d ", freq_avail[i] / 1000, > > > > + freq_avail[i] % 1000); > > > > + > > > > + buf[len - 1] = '\n'; > > > > + > > > > + return len; > > > > +} > > > > + > > > > +static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available, > > > > + 0444, ad7192_show_filter_avail, NULL, 0); > > > > + > > > > +static IIO_DEVICE_ATTR(bridge_switch_en, 0644, > > > > + ad7192_show_bridge_switch, ad7192_set, > > > > + AD7192_REG_GPOCON); > > > > + > > > > +static IIO_DEVICE_ATTR(ac_excitation_en, 0644, > > > > + ad7192_show_ac_excitation, ad7192_set, > > > > + AD7192_REG_MODE); > > > > + > > > > +static struct attribute *ad7192_attributes[] = { > > > > + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, > > > > + &iio_dev_attr_bridge_switch_en.dev_attr.attr, > > > > + &iio_dev_attr_ac_excitation_en.dev_attr.attr, > > > > + NULL > > > > +}; > > > > + > > > > +static const struct attribute_group ad7192_attribute_group = { > > > > + .attrs = ad7192_attributes, > > > > +}; > > > > + > > > > +static struct attribute *ad7195_attributes[] = { > > > > + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, > > > > + &iio_dev_attr_bridge_switch_en.dev_attr.attr, > > > > + NULL > > > > +}; > > > > + > > > > +static const struct attribute_group ad7195_attribute_group = { > > > > + .attrs = ad7195_attributes, > > > > +}; > > > > + > > > > +static unsigned int ad7192_get_temp_scale(bool unipolar) > > > > +{ > > > > + return unipolar ? 2815 * 2 : 2815; > > > > +} > > > > + > > > > +static int ad7192_set_3db_filter_freq(struct ad7192_state *st, > > > > + int val, int val2) > > > > +{ > > > > + int freq_avail[4], i, ret, freq; > > > > + unsigned int diff_new, diff_old; > > > > + int idx = 0; > > > > + > > > > + diff_old = U32_MAX; > > > > + freq = val * 1000 + val2; > > > > + > > > > + ad7192_get_available_filter_freq(st, freq_avail); > > > > + > > > > + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) { > > > > + diff_new = abs(freq - freq_avail[i]); > > > > + if (diff_new < diff_old) { > > > > + diff_old = diff_new; > > > > + idx = i; > > > > + } > > > > + } > > > > + > > > > + switch (idx) { > > > > + case 0: > > > > + st->f_order = AD7192_SYNC4_FILTER; > > > > + st->mode &= ~AD7192_MODE_SINC3; > > > > + > > > > + st->conf |= AD7192_CONF_CHOP; > > > > + break; > > > > + case 1: > > > > + st->f_order = AD7192_SYNC3_FILTER; > > > > + st->mode |= AD7192_MODE_SINC3; > > > > + > > > > + st->conf |= AD7192_CONF_CHOP; > > > > + break; > > > > + case 2: > > > > + st->f_order = AD7192_NO_SYNC_FILTER; > > > > + st->mode &= ~AD7192_MODE_SINC3; > > > > + > > > > + st->conf &= ~AD7192_CONF_CHOP; > > > > + break; > > > > + case 3: > > > > + st->f_order = AD7192_NO_SYNC_FILTER; > > > > + st->mode |= AD7192_MODE_SINC3; > > > > + > > > > + st->conf &= ~AD7192_CONF_CHOP; > > > > + break; > > > > + } > > > > + > > > > + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > > + if (ret < 0) > > > > + return ret; > > > > + > > > > + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); > > > > +} > > > > + > > > > +static int ad7192_get_3db_filter_freq(struct ad7192_state *st) > > > > +{ > > > > + unsigned int fadc; > > > > + > > > > + fadc = DIV_ROUND_CLOSEST(st->fclk, > > > > + st->f_order * AD7192_MODE_RATE(st->mode)); > > > > + > > > > + if (st->conf & AD7192_CONF_CHOP) > > > > + return DIV_ROUND_CLOSEST(fadc * 240, 1024); > > > > + if (st->mode & AD7192_MODE_SINC3) > > > > + return DIV_ROUND_CLOSEST(fadc * 272, 1024); > > > > + else > > > > + return DIV_ROUND_CLOSEST(fadc * 230, 1024); > > > > +} > > > > + > > > > +static int ad7192_read_raw(struct iio_dev *indio_dev, > > > > + struct iio_chan_spec const *chan, > > > > + int *val, > > > > + int *val2, > > > > + long m) > > > > +{ > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); > > > > + > > > > + switch (m) { > > > > + case IIO_CHAN_INFO_RAW: > > > > + return ad_sigma_delta_single_conversion(indio_dev, chan, val); > > > > + case IIO_CHAN_INFO_SCALE: > > > > + switch (chan->type) { > > > > + case IIO_VOLTAGE: > > > > + mutex_lock(&st->lock); > > > > + *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; > > > > + *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; > > > > + mutex_unlock(&st->lock); > > > > + return IIO_VAL_INT_PLUS_NANO; > > > > + case IIO_TEMP: > > > > + *val = 0; > > > > + *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); > > > > + return IIO_VAL_INT_PLUS_NANO; > > > > + default: > > > > + return -EINVAL; > > > > + } > > > > + case IIO_CHAN_INFO_OFFSET: > > > > + if (!unipolar) > > > > + *val = -(1 << (chan->scan_type.realbits - 1)); > > > > + else > > > > + *val = 0; > > > > + /* Kelvin to Celsius */ > > > > + if (chan->type == IIO_TEMP) > > > > + *val -= 273 * ad7192_get_temp_scale(unipolar); > > > > + return IIO_VAL_INT; > > > > + case IIO_CHAN_INFO_SAMP_FREQ: > > > > + *val = st->fclk / > > > > + (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); > > > > + return IIO_VAL_INT; > > > > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > > > > + *val = ad7192_get_3db_filter_freq(st); > > > > + *val2 = 1000; > > > > + return IIO_VAL_FRACTIONAL; > > > > + } > > > > + > > > > + return -EINVAL; > > > > +} > > > > + > > > > +static int ad7192_write_raw(struct iio_dev *indio_dev, > > > > + struct iio_chan_spec const *chan, > > > > + int val, > > > > + int val2, > > > > + long mask) > > > > +{ > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + int ret, i, div; > > > > + unsigned int tmp; > > > > + > > > > + ret = iio_device_claim_direct_mode(indio_dev); > > > > + if (ret) > > > > + return ret; > > > > + > > > > + switch (mask) { > > > > + case IIO_CHAN_INFO_SCALE: > > > > + ret = -EINVAL; > > > > + mutex_lock(&st->lock); > > > > + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) > > > > + if (val2 == st->scale_avail[i][1]) { > > > > + ret = 0; > > > > + tmp = st->conf; > > > > + st->conf &= ~AD7192_CONF_GAIN(-1); > > > > + st->conf |= AD7192_CONF_GAIN(i); > > > > + if (tmp == st->conf) > > > > + break; > > > > + ad_sd_write_reg(&st->sd, AD7192_REG_CONF, > > > > + 3, st->conf); > > > > + ad7192_calibrate_all(st); > > > > + break; > > > > + } > > > > + mutex_unlock(&st->lock); > > > > + break; > > > > + case IIO_CHAN_INFO_SAMP_FREQ: > > > > + if (!val) { > > > > + ret = -EINVAL; > > > > + break; > > > > + } > > > > + > > > > + div = st->fclk / (val * st->f_order * 1024); > > > > + if (div < 1 || div > 1023) { > > > > + ret = -EINVAL; > > > > + break; > > > > + } > > > > + > > > > + st->mode &= ~AD7192_MODE_RATE(-1); > > > > + st->mode |= AD7192_MODE_RATE(div); > > > > + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); > > > > + break; > > > > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > > > > + ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000); > > > > + break; > > > > + default: > > > > + ret = -EINVAL; > > > > + } > > > > + > > > > + iio_device_release_direct_mode(indio_dev); > > > > + > > > > + return ret; > > > > +} > > > > + > > > > +static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, > > > > + struct iio_chan_spec const *chan, > > > > + long mask) > > > > +{ > > > > + switch (mask) { > > > > + case IIO_CHAN_INFO_SCALE: > > > > + return IIO_VAL_INT_PLUS_NANO; > > > > + case IIO_CHAN_INFO_SAMP_FREQ: > > > > + return IIO_VAL_INT; > > > > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > > > > + return IIO_VAL_INT_PLUS_MICRO; > > > > + default: > > > > + return -EINVAL; > > > > + } > > > > +} > > > > + > > > > +static int ad7192_read_avail(struct iio_dev *indio_dev, > > > > + struct iio_chan_spec const *chan, > > > > + const int **vals, int *type, int *length, > > > > + long mask) > > > > +{ > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + > > > > + switch (mask) { > > > > + case IIO_CHAN_INFO_SCALE: > > > > + *vals = (int *)st->scale_avail; > > > > + *type = IIO_VAL_INT_PLUS_NANO; > > > > + /* Values are stored in a 2D matrix */ > > > > + *length = ARRAY_SIZE(st->scale_avail) * 2; > > > > + > > > > + return IIO_AVAIL_LIST; > > > > + } > > > > + > > > > + return -EINVAL; > > > > +} > > > > + > > > > +static const struct iio_info ad7192_info = { > > > > + .read_raw = ad7192_read_raw, > > > > + .write_raw = ad7192_write_raw, > > > > + .write_raw_get_fmt = ad7192_write_raw_get_fmt, > > > > + .read_avail = ad7192_read_avail, > > > > + .attrs = &ad7192_attribute_group, > > > > + .validate_trigger = ad_sd_validate_trigger, > > > > +}; > > > > + > > > > +static const struct iio_info ad7195_info = { > > > > + .read_raw = ad7192_read_raw, > > > > + .write_raw = ad7192_write_raw, > > > > + .write_raw_get_fmt = ad7192_write_raw_get_fmt, > > > > + .read_avail = ad7192_read_avail, > > > > + .attrs = &ad7195_attribute_group, > > > > + .validate_trigger = ad_sd_validate_trigger, > > > > +}; > > > > + > > > > +#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, > > > > _extend_name, \ > > > > + _type, _mask_type_av, _ext_info) \ > > > > + { \ > > > > + .type = (_type), \ > > > > + .differential = ((_channel2) == -1 ? 0 : 1), \ > > > > + .indexed = 1, \ > > > > + .channel = (_channel1), \ > > > > + .channel2 = (_channel2), \ > > > > + .address = (_address), \ > > > > + .extend_name = (_extend_name), \ > > > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > > > > + BIT(IIO_CHAN_INFO_OFFSET), \ > > > > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > > > > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ > > > > + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ > > > > + .info_mask_shared_by_type_available = (_mask_type_av), \ > > > > + .ext_info = (_ext_info), \ > > > > + .scan_index = (_si), \ > > > > + .scan_type = { \ > > > > + .sign = 'u', \ > > > > + .realbits = 24, \ > > > > + .storagebits = 32, \ > > > > + .endianness = IIO_BE, \ > > > > + }, \ > > > > + } > > > > + > > > > +#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ > > > > + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \ > > > > + IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \ > > > > + ad7192_calibsys_ext_info) > > > > + > > > > +#define AD719x_CHANNEL(_si, _channel1, _address) \ > > > > + __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \ > > > > + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) > > > > + > > > > +#define AD719x_SHORTED_CHANNEL(_si, _channel1, _address) \ > > > > + __AD719x_CHANNEL(_si, _channel1, -1, _address, "shorted", IIO_VOLTAGE, \ > > > > + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) > > > > + > > > > +#define AD719x_TEMP_CHANNEL(_si, _address) \ > > > > + __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL) > > > > + > > > > +static const struct iio_chan_spec ad7192_channels[] = { > > > > + AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M), > > > > + AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M), > > > > + AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP), > > > > + AD719x_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M), > > > > + AD719x_CHANNEL(4, 1, AD7192_CH_AIN1), > > > > + AD719x_CHANNEL(5, 2, AD7192_CH_AIN2), > > > > + AD719x_CHANNEL(6, 3, AD7192_CH_AIN3), > > > > + AD719x_CHANNEL(7, 4, AD7192_CH_AIN4), > > > > + IIO_CHAN_SOFT_TIMESTAMP(8), > > > > +}; > > > > + > > > > +static const struct iio_chan_spec ad7193_channels[] = { > > > > + AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), > > > > + AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), > > > > + AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), > > > > + AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), > > > > + AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP), > > > > + AD719x_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M), > > > > + AD719x_CHANNEL(6, 1, AD7193_CH_AIN1), > > > > + AD719x_CHANNEL(7, 2, AD7193_CH_AIN2), > > > > + AD719x_CHANNEL(8, 3, AD7193_CH_AIN3), > > > > + AD719x_CHANNEL(9, 4, AD7193_CH_AIN4), > > > > + AD719x_CHANNEL(10, 5, AD7193_CH_AIN5), > > > > + AD719x_CHANNEL(11, 6, AD7193_CH_AIN6), > > > > + AD719x_CHANNEL(12, 7, AD7193_CH_AIN7), > > > > + AD719x_CHANNEL(13, 8, AD7193_CH_AIN8), > > > > + IIO_CHAN_SOFT_TIMESTAMP(14), > > > > +}; > > > > + > > > > +static int ad7192_channels_config(struct iio_dev *indio_dev) > > > > +{ > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + > > > > + switch (st->devid) { > > > > + case ID_AD7193: > > > > + indio_dev->channels = ad7193_channels; > > > > + indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); > > > > + break; > > > > + default: > > > > + indio_dev->channels = ad7192_channels; > > > > + indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); > > > > + break; > > > > + } > > > > + > > > > + return 0; > > > > +} > > > > + > > > > +static const struct of_device_id ad7192_of_match[]; > > > > + > > > > +static int ad7192_probe(struct spi_device *spi) > > > > +{ > > > > + const struct of_device_id *match; > > > > + struct ad7192_state *st; > > > > + struct iio_dev *indio_dev; > > > > + int ret, voltage_uv = 0; > > > > + > > > > + if (!spi->irq) { > > > > + dev_err(&spi->dev, "no IRQ?\n"); > > > > + return -ENODEV; > > > > + } > > > > + > > > > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); > > > > + if (!indio_dev) > > > > + return -ENOMEM; > > > > + > > > > + st = iio_priv(indio_dev); > > > > + > > > > + mutex_init(&st->lock); > > > > + > > > > + st->avdd = devm_regulator_get(&spi->dev, "avdd"); > > > > + if (IS_ERR(st->avdd)) > > > > + return PTR_ERR(st->avdd); > > > > + > > > > + ret = regulator_enable(st->avdd); > > > > + if (ret) { > > > > + dev_err(&spi->dev, "Failed to enable specified AVdd supply\n"); > > > > + return ret; > > > > + } > > > > + > > > > + st->dvdd = devm_regulator_get(&spi->dev, "dvdd"); > > > > + if (IS_ERR(st->dvdd)) { > > > > + ret = PTR_ERR(st->dvdd); > > > > + goto error_disable_avdd; > > > > + } > > > > + > > > > + ret = regulator_enable(st->dvdd); > > > > + if (ret) { > > > > + dev_err(&spi->dev, "Failed to enable specified DVdd supply\n"); > > > > + goto error_disable_avdd; > > > > + } > > > > + > > > > + voltage_uv = regulator_get_voltage(st->avdd); > > > > + > > > > + if (voltage_uv) { > > > > + st->int_vref_mv = voltage_uv / 1000; > > > > + } else { > > > > + ret = voltage_uv; > > > > + dev_err(&spi->dev, "Device tree error, reference voltage > > > > undefined\n"); > > > > + goto error_disable_avdd; > > > > + } > > > > + > > > > + match = of_match_device(ad7192_of_match, &spi->dev); > > > > + if (!match) > > > > + return -EINVAL; > > > > + > > > > + spi_set_drvdata(spi, indio_dev); > > > > + st->devid = (unsigned long)match->data; > > > > + indio_dev->dev.parent = &spi->dev; > > > > + indio_dev->name = spi_get_device_id(spi)->name; > > > > + indio_dev->modes = INDIO_DIRECT_MODE; > > > > + > > > > + ret = ad7192_channels_config(indio_dev); > > > > + if (ret < 0) > > > > + goto error_disable_dvdd; > > > > + > > > > + if (st->devid == ID_AD7195) > > > > + indio_dev->info = &ad7195_info; > > > > + else > > > > + indio_dev->info = &ad7192_info; > > > > + > > > > + ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info); > > > > + > > > > + ret = ad_sd_setup_buffer_and_trigger(indio_dev); > > > > + if (ret) > > > > + goto error_disable_dvdd; > > > > + > > > > + st->fclk = AD7192_INT_FREQ_MHZ; > > > > + > > > > + st->mclk = devm_clk_get(&st->sd.spi->dev, "mclk"); > > > > + if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) { > > > > + ret = PTR_ERR(st->mclk); > > > > + goto error_remove_trigger; > > > > + } > > > > + > > > > + st->clock_sel = ad7192_of_clock_select(st); > > > > + > > > > + if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 || > > > > + st->clock_sel == AD7192_CLK_EXT_MCLK2) { > > > > + ret = clk_prepare_enable(st->mclk); > > > > + if (ret < 0) > > > > + goto error_remove_trigger; > > > > + > > > > + st->fclk = clk_get_rate(st->mclk); > > > > + if (!ad7192_valid_external_frequency(st->fclk)) { > > > > + ret = -EINVAL; > > > > + dev_err(&spi->dev, > > > > + "External clock frequency out of bounds\n"); > > > > + goto error_disable_clk; > > > > + } > > > > + } > > > > + > > > > + ret = ad7192_setup(st, spi->dev.of_node); > > > > + if (ret) > > > > + goto error_disable_clk; > > > > + > > > > + ret = iio_device_register(indio_dev); > > > > + if (ret < 0) > > > > + goto error_disable_clk; > > > > + > > > > + return 0; > > > > + > > > > +error_disable_clk: > > > > + clk_disable_unprepare(st->mclk); > > > > +error_remove_trigger: > > > > + ad_sd_cleanup_buffer_and_trigger(indio_dev); > > > > +error_disable_dvdd: > > > > + regulator_disable(st->dvdd); > > > > +error_disable_avdd: > > > > + regulator_disable(st->avdd); > > > > + > > > > + return ret; > > > > +} > > > > + > > > > +static int ad7192_remove(struct spi_device *spi) > > > > +{ > > > > + struct iio_dev *indio_dev = spi_get_drvdata(spi); > > > > + struct ad7192_state *st = iio_priv(indio_dev); > > > > + > > > > + iio_device_unregister(indio_dev); > > > > + clk_disable_unprepare(st->mclk); > > > > + ad_sd_cleanup_buffer_and_trigger(indio_dev); > > > > + > > > > + regulator_disable(st->dvdd); > > > > + regulator_disable(st->avdd); > > > > + > > > > + return 0; > > > > +} > > > > + > > > > +static const struct of_device_id ad7192_of_match[] = { > > > > + { .compatible = "adi,ad7190", .data = (void *)ID_AD7190}, > > > > + { .compatible = "adi,ad7192", .data = (void *)ID_AD7192 }, > > > > + { .compatible = "adi,ad7193", .data = (void *)ID_AD7193 }, > > > > + { .compatible = "adi,ad7195", .data = (void *)ID_AD7195 }, > > > > + {} > > > > +}; > > > > + > > > > +MODULE_DEVICE_TABLE(of, ad7192_of_match); > > > > + > > > > +static struct spi_driver ad7192_driver = { > > > > + .driver = { > > > > + .name = "ad7192", > > > > + .of_match_table = ad7192_of_match, > > > > + }, > > > > + .probe = ad7192_probe, > > > > + .remove = ad7192_remove, > > > > +}; > > > > +module_spi_driver(ad7192_driver); > > > > + > > > > +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); > > > > +MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC"); > > > > +MODULE_LICENSE("GPL v2");
diff --git a/MAINTAINERS b/MAINTAINERS index e699fe378e71..c82bdb31e2fb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -922,6 +922,14 @@ S: Supported F: drivers/iio/adc/ad7124.c F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +ANALOG DEVICES INC AD7192 DRIVER +M: Alexandru Tachici <alexandru.tachici@analog.com> +L: linux-iio@vger.kernel.org +W: http://ez.analog.com/community/linux-device-drivers +S: Supported +F: drivers/iio/adc/ad7192.c +F: Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml + ANALOG DEVICES INC AD7292 DRIVER M: Marcelo Schmitt <marcelo.schmitt1@gmail.com> L: linux-iio@vger.kernel.org diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 82e33082958c..f4da821c4022 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -39,6 +39,18 @@ config AD7124 To compile this driver as a module, choose M here: the module will be called ad7124. +config AD7192 + tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" + depends on SPI + select AD_SIGMA_DELTA + help + Say yes here to build support for Analog Devices AD7190, + AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7192. + config AD7266 tristate "Analog Devices AD7265/AD7266 ADC driver" depends on SPI_MASTER diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 919228900df9..8462455b4228 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o obj-$(CONFIG_AD7124) += ad7124.o +obj-$(CONFIG_AD7192) += ad7192.o obj-$(CONFIG_AD7266) += ad7266.o obj-$(CONFIG_AD7291) += ad7291.o obj-$(CONFIG_AD7292) += ad7292.o diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c new file mode 100644 index 000000000000..e75d808a2f41 --- /dev/null +++ b/drivers/iio/adc/ad7192.c @@ -0,0 +1,1043 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AD7190 AD7192 AD7193 AD7195 SPI ADC driver + * + * Copyright 2011-2015 Analog Devices Inc. + */ + +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/of_device.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/adc/ad_sigma_delta.h> + +/* Registers */ +#define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) */ +#define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) */ +#define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit */ +#define AD7192_REG_CONF 2 /* Configuration Register (RW, 24-bit) */ +#define AD7192_REG_DATA 3 /* Data Register (RO, 24/32-bit) */ +#define AD7192_REG_ID 4 /* ID Register (RO, 8-bit) */ +#define AD7192_REG_GPOCON 5 /* GPOCON Register (RO, 8-bit) */ +#define AD7192_REG_OFFSET 6 /* Offset Register (RW, 16-bit */ + /* (AD7792)/24-bit (AD7192)) */ +#define AD7192_REG_FULLSALE 7 /* Full-Scale Register */ + /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */ + +/* Communications Register Bit Designations (AD7192_REG_COMM) */ +#define AD7192_COMM_WEN BIT(7) /* Write Enable */ +#define AD7192_COMM_WRITE 0 /* Write Operation */ +#define AD7192_COMM_READ BIT(6) /* Read Operation */ +#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ +#define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data Register */ + +/* Status Register Bit Designations (AD7192_REG_STAT) */ +#define AD7192_STAT_RDY BIT(7) /* Ready */ +#define AD7192_STAT_ERR BIT(6) /* Error (Overrange, Underrange) */ +#define AD7192_STAT_NOREF BIT(5) /* Error no external reference */ +#define AD7192_STAT_PARITY BIT(4) /* Parity */ +#define AD7192_STAT_CH3 BIT(2) /* Channel 3 */ +#define AD7192_STAT_CH2 BIT(1) /* Channel 2 */ +#define AD7192_STAT_CH1 BIT(0) /* Channel 1 */ + +/* Mode Register Bit Designations (AD7192_REG_MODE) */ +#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode Select */ +#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select Mask */ +#define AD7192_MODE_DAT_STA BIT(20) /* Status Register transmission */ +#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ +#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ +#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 only)*/ +#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ +#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/ +#define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ +#define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */ +#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate Select */ + +/* Mode Register: AD7192_MODE_SEL options */ +#define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ +#define AD7192_MODE_SINGLE 1 /* Single Conversion Mode */ +#define AD7192_MODE_IDLE 2 /* Idle Mode */ +#define AD7192_MODE_PWRDN 3 /* Power-Down Mode */ +#define AD7192_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ +#define AD7192_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ +#define AD7192_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ +#define AD7192_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ + +/* Mode Register: AD7192_MODE_CLKSRC options */ +#define AD7192_CLK_EXT_MCLK1_2 0 /* External 4.92 MHz Clock connected*/ + /* from MCLK1 to MCLK2 */ +#define AD7192_CLK_EXT_MCLK2 1 /* External Clock applied to MCLK2 */ +#define AD7192_CLK_INT 2 /* Internal 4.92 MHz Clock not */ + /* available at the MCLK2 pin */ +#define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock available*/ + /* at the MCLK2 pin */ + +/* Configuration Register Bit Designations (AD7192_REG_CONF) */ + +#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ +#define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ +#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ +#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ +#define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ +#define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ +#define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ +#define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ +#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ + +#define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ +#define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ +#define AD7192_CH_TEMP BIT(2) /* Temp Sensor */ +#define AD7192_CH_AIN2P_AIN2M BIT(3) /* AIN2(+) - AIN2(-) */ +#define AD7192_CH_AIN1 BIT(4) /* AIN1 - AINCOM */ +#define AD7192_CH_AIN2 BIT(5) /* AIN2 - AINCOM */ +#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */ +#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */ + +#define AD7193_CH_AIN1P_AIN2M 0x001 /* AIN1(+) - AIN2(-) */ +#define AD7193_CH_AIN3P_AIN4M 0x002 /* AIN3(+) - AIN4(-) */ +#define AD7193_CH_AIN5P_AIN6M 0x004 /* AIN5(+) - AIN6(-) */ +#define AD7193_CH_AIN7P_AIN8M 0x008 /* AIN7(+) - AIN8(-) */ +#define AD7193_CH_TEMP 0x100 /* Temp senseor */ +#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */ +#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */ +#define AD7193_CH_AIN2 0x402 /* AIN2 - AINCOM */ +#define AD7193_CH_AIN3 0x404 /* AIN3 - AINCOM */ +#define AD7193_CH_AIN4 0x408 /* AIN4 - AINCOM */ +#define AD7193_CH_AIN5 0x410 /* AIN5 - AINCOM */ +#define AD7193_CH_AIN6 0x420 /* AIN6 - AINCOM */ +#define AD7193_CH_AIN7 0x440 /* AIN7 - AINCOM */ +#define AD7193_CH_AIN8 0x480 /* AIN7 - AINCOM */ +#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */ + +/* ID Register Bit Designations (AD7192_REG_ID) */ +#define ID_AD7190 0x4 +#define ID_AD7192 0x0 +#define ID_AD7193 0x2 +#define ID_AD7195 0x6 +#define AD7192_ID_MASK 0x0F + +/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ +#define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch enable */ +#define AD7192_GPOCON_GP32EN BIT(5) /* Digital Output P3 and P2 enable */ +#define AD7192_GPOCON_GP10EN BIT(4) /* Digital Output P1 and P0 enable */ +#define AD7192_GPOCON_P3DAT BIT(3) /* P3 state */ +#define AD7192_GPOCON_P2DAT BIT(2) /* P2 state */ +#define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */ +#define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */ + +#define AD7192_EXT_FREQ_MHZ_MIN 2457600 +#define AD7192_EXT_FREQ_MHZ_MAX 5120000 +#define AD7192_INT_FREQ_MHZ 4915200 + +#define AD7192_NO_SYNC_FILTER 1 +#define AD7192_SYNC3_FILTER 3 +#define AD7192_SYNC4_FILTER 4 + +/* NOTE: + * The AD7190/2/5 features a dual use data out ready DOUT/RDY output. + * In order to avoid contentions on the SPI bus, it's therefore necessary + * to use spi bus locking. + * + * The DOUT/RDY output must also be wired to an interrupt capable GPIO. + */ + +enum { + AD7192_SYSCALIB_ZERO_SCALE, + AD7192_SYSCALIB_FULL_SCALE, +}; + +struct ad7192_state { + struct regulator *avdd; + struct regulator *dvdd; + struct clk *mclk; + u16 int_vref_mv; + u32 fclk; + u32 f_order; + u32 mode; + u32 conf; + u32 scale_avail[8][2]; + u8 gpocon; + u8 devid; + u8 clock_sel; + struct mutex lock; /* protect sensor state */ + u8 syscalib_mode[8]; + + struct ad_sigma_delta sd; +}; + +static const char * const ad7192_syscalib_modes[] = { + [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale", + [AD7192_SYSCALIB_FULL_SCALE] = "full_scale", +}; + +static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct ad7192_state *st = iio_priv(indio_dev); + + st->syscalib_mode[chan->channel] = mode; + + return 0; +} + +static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct ad7192_state *st = iio_priv(indio_dev); + + return st->syscalib_mode[chan->channel]; +} + +static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct ad7192_state *st = iio_priv(indio_dev); + bool sys_calib; + int ret, temp; + + ret = strtobool(buf, &sys_calib); + if (ret) + return ret; + + temp = st->syscalib_mode[chan->channel]; + if (sys_calib) { + if (temp == AD7192_SYSCALIB_ZERO_SCALE) + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO, + chan->address); + else + ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL, + chan->address); + } + + return ret ? ret : len; +} + +static const struct iio_enum ad7192_syscalib_mode_enum = { + .items = ad7192_syscalib_modes, + .num_items = ARRAY_SIZE(ad7192_syscalib_modes), + .set = ad7192_set_syscalib_mode, + .get = ad7192_get_syscalib_mode +}; + +static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = { + { + .name = "sys_calibration", + .write = ad7192_write_syscalib, + .shared = IIO_SEPARATE, + }, + IIO_ENUM("sys_calibration_mode", IIO_SEPARATE, + &ad7192_syscalib_mode_enum), + IIO_ENUM_AVAILABLE("sys_calibration_mode", &ad7192_syscalib_mode_enum), + {} +}; + +static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd) +{ + return container_of(sd, struct ad7192_state, sd); +} + +static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel) +{ + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); + + st->conf &= ~AD7192_CONF_CHAN_MASK; + st->conf |= AD7192_CONF_CHAN(channel); + + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); +} + +static int ad7192_set_mode(struct ad_sigma_delta *sd, + enum ad_sigma_delta_mode mode) +{ + struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); + + st->mode &= ~AD7192_MODE_SEL_MASK; + st->mode |= AD7192_MODE_SEL(mode); + + return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); +} + +static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { + .set_channel = ad7192_set_channel, + .set_mode = ad7192_set_mode, + .has_registers = true, + .addr_shift = 3, + .read_mask = BIT(6), +}; + +static const struct ad_sd_calib_data ad7192_calib_arr[8] = { + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1}, + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1}, + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2}, + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2}, + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3}, + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3}, + {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4}, + {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4} +}; + +static int ad7192_calibrate_all(struct ad7192_state *st) +{ + return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr, + ARRAY_SIZE(ad7192_calib_arr)); +} + +static inline bool ad7192_valid_external_frequency(u32 freq) +{ + return (freq >= AD7192_EXT_FREQ_MHZ_MIN && + freq <= AD7192_EXT_FREQ_MHZ_MAX); +} + +static int ad7192_of_clock_select(struct ad7192_state *st) +{ + struct device_node *np = st->sd.spi->dev.of_node; + unsigned int clock_sel; + + clock_sel = AD7192_CLK_INT; + + /* use internal clock */ + if (PTR_ERR(st->mclk) == -ENOENT) { + if (of_property_read_bool(np, "adi,int-clock-output-enable")) + clock_sel = AD7192_CLK_INT_CO; + } else { + if (of_property_read_bool(np, "adi,clock-xtal")) + clock_sel = AD7192_CLK_EXT_MCLK1_2; + else + clock_sel = AD7192_CLK_EXT_MCLK2; + } + + return clock_sel; +} + +static int ad7192_setup(struct ad7192_state *st, struct device_node *np) +{ + struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi); + bool rej60_en, refin2_en; + bool buf_en, bipolar, burnout_curr_en; + unsigned long long scale_uv; + int i, ret, id; + + /* reset the serial interface */ + ret = ad_sd_reset(&st->sd, 48); + if (ret < 0) + return ret; + usleep_range(500, 1000); /* Wait for at least 500us */ + + /* write/read test for device presence */ + ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id); + if (ret) + return ret; + + id &= AD7192_ID_MASK; + + if (id != st->devid) + dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n", + id); + + st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | + AD7192_MODE_CLKSRC(st->clock_sel) | + AD7192_MODE_RATE(480); + + st->conf = AD7192_CONF_GAIN(0); + + rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); + if (rej60_en) + st->mode |= AD7192_MODE_REJ60; + + refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable"); + if (refin2_en && st->devid != ID_AD7195) + st->conf |= AD7192_CONF_REFSEL; + + st->conf &= ~AD7192_CONF_CHOP; + st->f_order = AD7192_NO_SYNC_FILTER; + + buf_en = of_property_read_bool(np, "adi,buffer-enable"); + if (buf_en) + st->conf |= AD7192_CONF_BUF; + + bipolar = of_property_read_bool(np, "bipolar"); + if (!bipolar) + st->conf |= AD7192_CONF_UNIPOLAR; + + burnout_curr_en = of_property_read_bool(np, + "adi,burnout-currents-enable"); + if (burnout_curr_en && buf_en) { + st->conf |= AD7192_CONF_BURN; + } else if (burnout_curr_en) { + dev_warn(&st->sd.spi->dev, + "Can't enable burnout currents: see CHOP or buffer\n"); + } + + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); + if (ret) + return ret; + + ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); + if (ret) + return ret; + + ret = ad7192_calibrate_all(st); + if (ret) + return ret; + + /* Populate available ADC input ranges */ + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { + scale_uv = ((u64)st->int_vref_mv * 100000000) + >> (indio_dev->channels[0].scan_type.realbits - + ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); + scale_uv >>= i; + + st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; + st->scale_avail[i][0] = scale_uv; + } + + return 0; +} + +static ssize_t ad7192_show_ac_excitation(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7192_state *st = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); +} + +static ssize_t ad7192_show_bridge_switch(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7192_state *st = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); +} + +static ssize_t ad7192_set(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7192_state *st = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + int ret; + bool val; + + ret = strtobool(buf, &val); + if (ret < 0) + return ret; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch ((u32)this_attr->address) { + case AD7192_REG_GPOCON: + if (val) + st->gpocon |= AD7192_GPOCON_BPDSW; + else + st->gpocon &= ~AD7192_GPOCON_BPDSW; + + ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon); + break; + case AD7192_REG_MODE: + if (val) + st->mode |= AD7192_MODE_ACX; + else + st->mode &= ~AD7192_MODE_ACX; + + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); + break; + default: + ret = -EINVAL; + } + + iio_device_release_direct_mode(indio_dev); + + return ret ? ret : len; +} + +static void ad7192_get_available_filter_freq(struct ad7192_state *st, + int *freq) +{ + unsigned int fadc; + + /* Formulas for filter at page 25 of the datasheet */ + fadc = DIV_ROUND_CLOSEST(st->fclk, + AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode)); + freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); + + fadc = DIV_ROUND_CLOSEST(st->fclk, + AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode)); + freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); + + fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); + freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024); + freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024); +} + +static ssize_t ad7192_show_filter_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7192_state *st = iio_priv(indio_dev); + unsigned int freq_avail[4], i; + size_t len = 0; + + ad7192_get_available_filter_freq(st, freq_avail); + + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) + len += scnprintf(buf + len, PAGE_SIZE - len, + "%d.%d ", freq_avail[i] / 1000, + freq_avail[i] % 1000); + + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available, + 0444, ad7192_show_filter_avail, NULL, 0); + +static IIO_DEVICE_ATTR(bridge_switch_en, 0644, + ad7192_show_bridge_switch, ad7192_set, + AD7192_REG_GPOCON); + +static IIO_DEVICE_ATTR(ac_excitation_en, 0644, + ad7192_show_ac_excitation, ad7192_set, + AD7192_REG_MODE); + +static struct attribute *ad7192_attributes[] = { + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, + &iio_dev_attr_bridge_switch_en.dev_attr.attr, + &iio_dev_attr_ac_excitation_en.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7192_attribute_group = { + .attrs = ad7192_attributes, +}; + +static struct attribute *ad7195_attributes[] = { + &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, + &iio_dev_attr_bridge_switch_en.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7195_attribute_group = { + .attrs = ad7195_attributes, +}; + +static unsigned int ad7192_get_temp_scale(bool unipolar) +{ + return unipolar ? 2815 * 2 : 2815; +} + +static int ad7192_set_3db_filter_freq(struct ad7192_state *st, + int val, int val2) +{ + int freq_avail[4], i, ret, freq; + unsigned int diff_new, diff_old; + int idx = 0; + + diff_old = U32_MAX; + freq = val * 1000 + val2; + + ad7192_get_available_filter_freq(st, freq_avail); + + for (i = 0; i < ARRAY_SIZE(freq_avail); i++) { + diff_new = abs(freq - freq_avail[i]); + if (diff_new < diff_old) { + diff_old = diff_new; + idx = i; + } + } + + switch (idx) { + case 0: + st->f_order = AD7192_SYNC4_FILTER; + st->mode &= ~AD7192_MODE_SINC3; + + st->conf |= AD7192_CONF_CHOP; + break; + case 1: + st->f_order = AD7192_SYNC3_FILTER; + st->mode |= AD7192_MODE_SINC3; + + st->conf |= AD7192_CONF_CHOP; + break; + case 2: + st->f_order = AD7192_NO_SYNC_FILTER; + st->mode &= ~AD7192_MODE_SINC3; + + st->conf &= ~AD7192_CONF_CHOP; + break; + case 3: + st->f_order = AD7192_NO_SYNC_FILTER; + st->mode |= AD7192_MODE_SINC3; + + st->conf &= ~AD7192_CONF_CHOP; + break; + } + + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); + if (ret < 0) + return ret; + + return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); +} + +static int ad7192_get_3db_filter_freq(struct ad7192_state *st) +{ + unsigned int fadc; + + fadc = DIV_ROUND_CLOSEST(st->fclk, + st->f_order * AD7192_MODE_RATE(st->mode)); + + if (st->conf & AD7192_CONF_CHOP) + return DIV_ROUND_CLOSEST(fadc * 240, 1024); + if (st->mode & AD7192_MODE_SINC3) + return DIV_ROUND_CLOSEST(fadc * 272, 1024); + else + return DIV_ROUND_CLOSEST(fadc * 230, 1024); +} + +static int ad7192_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + struct ad7192_state *st = iio_priv(indio_dev); + bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); + + switch (m) { + case IIO_CHAN_INFO_RAW: + return ad_sigma_delta_single_conversion(indio_dev, chan, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + mutex_lock(&st->lock); + *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; + *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; + mutex_unlock(&st->lock); + return IIO_VAL_INT_PLUS_NANO; + case IIO_TEMP: + *val = 0; + *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + if (!unipolar) + *val = -(1 << (chan->scan_type.realbits - 1)); + else + *val = 0; + /* Kelvin to Celsius */ + if (chan->type == IIO_TEMP) + *val -= 273 * ad7192_get_temp_scale(unipolar); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->fclk / + (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); + return IIO_VAL_INT; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + *val = ad7192_get_3db_filter_freq(st); + *val2 = 1000; + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int ad7192_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct ad7192_state *st = iio_priv(indio_dev); + int ret, i, div; + unsigned int tmp; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + ret = -EINVAL; + mutex_lock(&st->lock); + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) + if (val2 == st->scale_avail[i][1]) { + ret = 0; + tmp = st->conf; + st->conf &= ~AD7192_CONF_GAIN(-1); + st->conf |= AD7192_CONF_GAIN(i); + if (tmp == st->conf) + break; + ad_sd_write_reg(&st->sd, AD7192_REG_CONF, + 3, st->conf); + ad7192_calibrate_all(st); + break; + } + mutex_unlock(&st->lock); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + if (!val) { + ret = -EINVAL; + break; + } + + div = st->fclk / (val * st->f_order * 1024); + if (div < 1 || div > 1023) { + ret = -EINVAL; + break; + } + + st->mode &= ~AD7192_MODE_RATE(-1); + st->mode |= AD7192_MODE_RATE(div); + ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); + break; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000); + break; + default: + ret = -EINVAL; + } + + iio_device_release_direct_mode(indio_dev); + + return ret; +} + +static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_SAMP_FREQ: + return IIO_VAL_INT; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int ad7192_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct ad7192_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + *vals = (int *)st->scale_avail; + *type = IIO_VAL_INT_PLUS_NANO; + /* Values are stored in a 2D matrix */ + *length = ARRAY_SIZE(st->scale_avail) * 2; + + return IIO_AVAIL_LIST; + } + + return -EINVAL; +} + +static const struct iio_info ad7192_info = { + .read_raw = ad7192_read_raw, + .write_raw = ad7192_write_raw, + .write_raw_get_fmt = ad7192_write_raw_get_fmt, + .read_avail = ad7192_read_avail, + .attrs = &ad7192_attribute_group, + .validate_trigger = ad_sd_validate_trigger, +}; + +static const struct iio_info ad7195_info = { + .read_raw = ad7192_read_raw, + .write_raw = ad7192_write_raw, + .write_raw_get_fmt = ad7192_write_raw_get_fmt, + .read_avail = ad7192_read_avail, + .attrs = &ad7195_attribute_group, + .validate_trigger = ad_sd_validate_trigger, +}; + +#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \ + _type, _mask_type_av, _ext_info) \ + { \ + .type = (_type), \ + .differential = ((_channel2) == -1 ? 0 : 1), \ + .indexed = 1, \ + .channel = (_channel1), \ + .channel2 = (_channel2), \ + .address = (_address), \ + .extend_name = (_extend_name), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ + .info_mask_shared_by_type_available = (_mask_type_av), \ + .ext_info = (_ext_info), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 24, \ + .storagebits = 32, \ + .endianness = IIO_BE, \ + }, \ + } + +#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ + __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \ + IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \ + ad7192_calibsys_ext_info) + +#define AD719x_CHANNEL(_si, _channel1, _address) \ + __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) + +#define AD719x_SHORTED_CHANNEL(_si, _channel1, _address) \ + __AD719x_CHANNEL(_si, _channel1, -1, _address, "shorted", IIO_VOLTAGE, \ + BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) + +#define AD719x_TEMP_CHANNEL(_si, _address) \ + __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL) + +static const struct iio_chan_spec ad7192_channels[] = { + AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M), + AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M), + AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP), + AD719x_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M), + AD719x_CHANNEL(4, 1, AD7192_CH_AIN1), + AD719x_CHANNEL(5, 2, AD7192_CH_AIN2), + AD719x_CHANNEL(6, 3, AD7192_CH_AIN3), + AD719x_CHANNEL(7, 4, AD7192_CH_AIN4), + IIO_CHAN_SOFT_TIMESTAMP(8), +}; + +static const struct iio_chan_spec ad7193_channels[] = { + AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), + AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), + AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), + AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), + AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP), + AD719x_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M), + AD719x_CHANNEL(6, 1, AD7193_CH_AIN1), + AD719x_CHANNEL(7, 2, AD7193_CH_AIN2), + AD719x_CHANNEL(8, 3, AD7193_CH_AIN3), + AD719x_CHANNEL(9, 4, AD7193_CH_AIN4), + AD719x_CHANNEL(10, 5, AD7193_CH_AIN5), + AD719x_CHANNEL(11, 6, AD7193_CH_AIN6), + AD719x_CHANNEL(12, 7, AD7193_CH_AIN7), + AD719x_CHANNEL(13, 8, AD7193_CH_AIN8), + IIO_CHAN_SOFT_TIMESTAMP(14), +}; + +static int ad7192_channels_config(struct iio_dev *indio_dev) +{ + struct ad7192_state *st = iio_priv(indio_dev); + + switch (st->devid) { + case ID_AD7193: + indio_dev->channels = ad7193_channels; + indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); + break; + default: + indio_dev->channels = ad7192_channels; + indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); + break; + } + + return 0; +} + +static const struct of_device_id ad7192_of_match[]; + +static int ad7192_probe(struct spi_device *spi) +{ + const struct of_device_id *match; + struct ad7192_state *st; + struct iio_dev *indio_dev; + int ret, voltage_uv = 0; + + if (!spi->irq) { + dev_err(&spi->dev, "no IRQ?\n"); + return -ENODEV; + } + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + + mutex_init(&st->lock); + + st->avdd = devm_regulator_get(&spi->dev, "avdd"); + if (IS_ERR(st->avdd)) + return PTR_ERR(st->avdd); + + ret = regulator_enable(st->avdd); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified AVdd supply\n"); + return ret; + } + + st->dvdd = devm_regulator_get(&spi->dev, "dvdd"); + if (IS_ERR(st->dvdd)) { + ret = PTR_ERR(st->dvdd); + goto error_disable_avdd; + } + + ret = regulator_enable(st->dvdd); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified DVdd supply\n"); + goto error_disable_avdd; + } + + voltage_uv = regulator_get_voltage(st->avdd); + + if (voltage_uv) { + st->int_vref_mv = voltage_uv / 1000; + } else { + ret = voltage_uv; + dev_err(&spi->dev, "Device tree error, reference voltage undefined\n"); + goto error_disable_avdd; + } + + match = of_match_device(ad7192_of_match, &spi->dev); + if (!match) + return -EINVAL; + + spi_set_drvdata(spi, indio_dev); + st->devid = (unsigned long)match->data; + indio_dev->dev.parent = &spi->dev; + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = ad7192_channels_config(indio_dev); + if (ret < 0) + goto error_disable_dvdd; + + if (st->devid == ID_AD7195) + indio_dev->info = &ad7195_info; + else + indio_dev->info = &ad7192_info; + + ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info); + + ret = ad_sd_setup_buffer_and_trigger(indio_dev); + if (ret) + goto error_disable_dvdd; + + st->fclk = AD7192_INT_FREQ_MHZ; + + st->mclk = devm_clk_get(&st->sd.spi->dev, "mclk"); + if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) { + ret = PTR_ERR(st->mclk); + goto error_remove_trigger; + } + + st->clock_sel = ad7192_of_clock_select(st); + + if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 || + st->clock_sel == AD7192_CLK_EXT_MCLK2) { + ret = clk_prepare_enable(st->mclk); + if (ret < 0) + goto error_remove_trigger; + + st->fclk = clk_get_rate(st->mclk); + if (!ad7192_valid_external_frequency(st->fclk)) { + ret = -EINVAL; + dev_err(&spi->dev, + "External clock frequency out of bounds\n"); + goto error_disable_clk; + } + } + + ret = ad7192_setup(st, spi->dev.of_node); + if (ret) + goto error_disable_clk; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto error_disable_clk; + + return 0; + +error_disable_clk: + clk_disable_unprepare(st->mclk); +error_remove_trigger: + ad_sd_cleanup_buffer_and_trigger(indio_dev); +error_disable_dvdd: + regulator_disable(st->dvdd); +error_disable_avdd: + regulator_disable(st->avdd); + + return ret; +} + +static int ad7192_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct ad7192_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + clk_disable_unprepare(st->mclk); + ad_sd_cleanup_buffer_and_trigger(indio_dev); + + regulator_disable(st->dvdd); + regulator_disable(st->avdd); + + return 0; +} + +static const struct of_device_id ad7192_of_match[] = { + { .compatible = "adi,ad7190", .data = (void *)ID_AD7190}, + { .compatible = "adi,ad7192", .data = (void *)ID_AD7192 }, + { .compatible = "adi,ad7193", .data = (void *)ID_AD7193 }, + { .compatible = "adi,ad7195", .data = (void *)ID_AD7195 }, + {} +}; + +MODULE_DEVICE_TABLE(of, ad7192_of_match); + +static struct spi_driver ad7192_driver = { + .driver = { + .name = "ad7192", + .of_match_table = ad7192_of_match, + }, + .probe = ad7192_probe, + .remove = ad7192_remove, +}; +module_spi_driver(ad7192_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 31cd9a12f40f..b25f41053fac 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -15,18 +15,6 @@ config AD7816 To compile this driver as a module, choose M here: the module will be called ad7816. -config AD7192 - tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" - depends on SPI - select AD_SIGMA_DELTA - help - Say yes here to build support for Analog Devices AD7190, - AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). - If unsure, say N (but it's safe to say "Y"). - - To compile this driver as a module, choose M here: the - module will be called ad7192. - config AD7280 tristate "Analog Devices AD7280A Lithium Ion Battery Monitoring System" depends on SPI diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index 4b76769b32bc..6436a62b6278 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -4,5 +4,4 @@ # obj-$(CONFIG_AD7816) += ad7816.o -obj-$(CONFIG_AD7192) += ad7192.o obj-$(CONFIG_AD7280) += ad7280a.o diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c deleted file mode 100644 index e75d808a2f41..000000000000 --- a/drivers/staging/iio/adc/ad7192.c +++ /dev/null @@ -1,1043 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * AD7190 AD7192 AD7193 AD7195 SPI ADC driver - * - * Copyright 2011-2015 Analog Devices Inc. - */ - -#include <linux/interrupt.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/sysfs.h> -#include <linux/spi/spi.h> -#include <linux/regulator/consumer.h> -#include <linux/err.h> -#include <linux/sched.h> -#include <linux/delay.h> -#include <linux/of_device.h> - -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/iio/buffer.h> -#include <linux/iio/trigger.h> -#include <linux/iio/trigger_consumer.h> -#include <linux/iio/triggered_buffer.h> -#include <linux/iio/adc/ad_sigma_delta.h> - -/* Registers */ -#define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) */ -#define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) */ -#define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit */ -#define AD7192_REG_CONF 2 /* Configuration Register (RW, 24-bit) */ -#define AD7192_REG_DATA 3 /* Data Register (RO, 24/32-bit) */ -#define AD7192_REG_ID 4 /* ID Register (RO, 8-bit) */ -#define AD7192_REG_GPOCON 5 /* GPOCON Register (RO, 8-bit) */ -#define AD7192_REG_OFFSET 6 /* Offset Register (RW, 16-bit */ - /* (AD7792)/24-bit (AD7192)) */ -#define AD7192_REG_FULLSALE 7 /* Full-Scale Register */ - /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */ - -/* Communications Register Bit Designations (AD7192_REG_COMM) */ -#define AD7192_COMM_WEN BIT(7) /* Write Enable */ -#define AD7192_COMM_WRITE 0 /* Write Operation */ -#define AD7192_COMM_READ BIT(6) /* Read Operation */ -#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ -#define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data Register */ - -/* Status Register Bit Designations (AD7192_REG_STAT) */ -#define AD7192_STAT_RDY BIT(7) /* Ready */ -#define AD7192_STAT_ERR BIT(6) /* Error (Overrange, Underrange) */ -#define AD7192_STAT_NOREF BIT(5) /* Error no external reference */ -#define AD7192_STAT_PARITY BIT(4) /* Parity */ -#define AD7192_STAT_CH3 BIT(2) /* Channel 3 */ -#define AD7192_STAT_CH2 BIT(1) /* Channel 2 */ -#define AD7192_STAT_CH1 BIT(0) /* Channel 1 */ - -/* Mode Register Bit Designations (AD7192_REG_MODE) */ -#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode Select */ -#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select Mask */ -#define AD7192_MODE_DAT_STA BIT(20) /* Status Register transmission */ -#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ -#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ -#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 only)*/ -#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ -#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/ -#define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ -#define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */ -#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate Select */ - -/* Mode Register: AD7192_MODE_SEL options */ -#define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ -#define AD7192_MODE_SINGLE 1 /* Single Conversion Mode */ -#define AD7192_MODE_IDLE 2 /* Idle Mode */ -#define AD7192_MODE_PWRDN 3 /* Power-Down Mode */ -#define AD7192_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ -#define AD7192_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ -#define AD7192_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ -#define AD7192_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ - -/* Mode Register: AD7192_MODE_CLKSRC options */ -#define AD7192_CLK_EXT_MCLK1_2 0 /* External 4.92 MHz Clock connected*/ - /* from MCLK1 to MCLK2 */ -#define AD7192_CLK_EXT_MCLK2 1 /* External Clock applied to MCLK2 */ -#define AD7192_CLK_INT 2 /* Internal 4.92 MHz Clock not */ - /* available at the MCLK2 pin */ -#define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock available*/ - /* at the MCLK2 pin */ - -/* Configuration Register Bit Designations (AD7192_REG_CONF) */ - -#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ -#define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ -#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ -#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ -#define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ -#define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ -#define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ -#define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ -#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ - -#define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ -#define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ -#define AD7192_CH_TEMP BIT(2) /* Temp Sensor */ -#define AD7192_CH_AIN2P_AIN2M BIT(3) /* AIN2(+) - AIN2(-) */ -#define AD7192_CH_AIN1 BIT(4) /* AIN1 - AINCOM */ -#define AD7192_CH_AIN2 BIT(5) /* AIN2 - AINCOM */ -#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */ -#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */ - -#define AD7193_CH_AIN1P_AIN2M 0x001 /* AIN1(+) - AIN2(-) */ -#define AD7193_CH_AIN3P_AIN4M 0x002 /* AIN3(+) - AIN4(-) */ -#define AD7193_CH_AIN5P_AIN6M 0x004 /* AIN5(+) - AIN6(-) */ -#define AD7193_CH_AIN7P_AIN8M 0x008 /* AIN7(+) - AIN8(-) */ -#define AD7193_CH_TEMP 0x100 /* Temp senseor */ -#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */ -#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */ -#define AD7193_CH_AIN2 0x402 /* AIN2 - AINCOM */ -#define AD7193_CH_AIN3 0x404 /* AIN3 - AINCOM */ -#define AD7193_CH_AIN4 0x408 /* AIN4 - AINCOM */ -#define AD7193_CH_AIN5 0x410 /* AIN5 - AINCOM */ -#define AD7193_CH_AIN6 0x420 /* AIN6 - AINCOM */ -#define AD7193_CH_AIN7 0x440 /* AIN7 - AINCOM */ -#define AD7193_CH_AIN8 0x480 /* AIN7 - AINCOM */ -#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */ - -/* ID Register Bit Designations (AD7192_REG_ID) */ -#define ID_AD7190 0x4 -#define ID_AD7192 0x0 -#define ID_AD7193 0x2 -#define ID_AD7195 0x6 -#define AD7192_ID_MASK 0x0F - -/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ -#define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch enable */ -#define AD7192_GPOCON_GP32EN BIT(5) /* Digital Output P3 and P2 enable */ -#define AD7192_GPOCON_GP10EN BIT(4) /* Digital Output P1 and P0 enable */ -#define AD7192_GPOCON_P3DAT BIT(3) /* P3 state */ -#define AD7192_GPOCON_P2DAT BIT(2) /* P2 state */ -#define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */ -#define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */ - -#define AD7192_EXT_FREQ_MHZ_MIN 2457600 -#define AD7192_EXT_FREQ_MHZ_MAX 5120000 -#define AD7192_INT_FREQ_MHZ 4915200 - -#define AD7192_NO_SYNC_FILTER 1 -#define AD7192_SYNC3_FILTER 3 -#define AD7192_SYNC4_FILTER 4 - -/* NOTE: - * The AD7190/2/5 features a dual use data out ready DOUT/RDY output. - * In order to avoid contentions on the SPI bus, it's therefore necessary - * to use spi bus locking. - * - * The DOUT/RDY output must also be wired to an interrupt capable GPIO. - */ - -enum { - AD7192_SYSCALIB_ZERO_SCALE, - AD7192_SYSCALIB_FULL_SCALE, -}; - -struct ad7192_state { - struct regulator *avdd; - struct regulator *dvdd; - struct clk *mclk; - u16 int_vref_mv; - u32 fclk; - u32 f_order; - u32 mode; - u32 conf; - u32 scale_avail[8][2]; - u8 gpocon; - u8 devid; - u8 clock_sel; - struct mutex lock; /* protect sensor state */ - u8 syscalib_mode[8]; - - struct ad_sigma_delta sd; -}; - -static const char * const ad7192_syscalib_modes[] = { - [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale", - [AD7192_SYSCALIB_FULL_SCALE] = "full_scale", -}; - -static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - unsigned int mode) -{ - struct ad7192_state *st = iio_priv(indio_dev); - - st->syscalib_mode[chan->channel] = mode; - - return 0; -} - -static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan) -{ - struct ad7192_state *st = iio_priv(indio_dev); - - return st->syscalib_mode[chan->channel]; -} - -static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev, - uintptr_t private, - const struct iio_chan_spec *chan, - const char *buf, size_t len) -{ - struct ad7192_state *st = iio_priv(indio_dev); - bool sys_calib; - int ret, temp; - - ret = strtobool(buf, &sys_calib); - if (ret) - return ret; - - temp = st->syscalib_mode[chan->channel]; - if (sys_calib) { - if (temp == AD7192_SYSCALIB_ZERO_SCALE) - ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO, - chan->address); - else - ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL, - chan->address); - } - - return ret ? ret : len; -} - -static const struct iio_enum ad7192_syscalib_mode_enum = { - .items = ad7192_syscalib_modes, - .num_items = ARRAY_SIZE(ad7192_syscalib_modes), - .set = ad7192_set_syscalib_mode, - .get = ad7192_get_syscalib_mode -}; - -static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = { - { - .name = "sys_calibration", - .write = ad7192_write_syscalib, - .shared = IIO_SEPARATE, - }, - IIO_ENUM("sys_calibration_mode", IIO_SEPARATE, - &ad7192_syscalib_mode_enum), - IIO_ENUM_AVAILABLE("sys_calibration_mode", &ad7192_syscalib_mode_enum), - {} -}; - -static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd) -{ - return container_of(sd, struct ad7192_state, sd); -} - -static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel) -{ - struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); - - st->conf &= ~AD7192_CONF_CHAN_MASK; - st->conf |= AD7192_CONF_CHAN(channel); - - return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); -} - -static int ad7192_set_mode(struct ad_sigma_delta *sd, - enum ad_sigma_delta_mode mode) -{ - struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); - - st->mode &= ~AD7192_MODE_SEL_MASK; - st->mode |= AD7192_MODE_SEL(mode); - - return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); -} - -static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { - .set_channel = ad7192_set_channel, - .set_mode = ad7192_set_mode, - .has_registers = true, - .addr_shift = 3, - .read_mask = BIT(6), -}; - -static const struct ad_sd_calib_data ad7192_calib_arr[8] = { - {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1}, - {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1}, - {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2}, - {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2}, - {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3}, - {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3}, - {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4}, - {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4} -}; - -static int ad7192_calibrate_all(struct ad7192_state *st) -{ - return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr, - ARRAY_SIZE(ad7192_calib_arr)); -} - -static inline bool ad7192_valid_external_frequency(u32 freq) -{ - return (freq >= AD7192_EXT_FREQ_MHZ_MIN && - freq <= AD7192_EXT_FREQ_MHZ_MAX); -} - -static int ad7192_of_clock_select(struct ad7192_state *st) -{ - struct device_node *np = st->sd.spi->dev.of_node; - unsigned int clock_sel; - - clock_sel = AD7192_CLK_INT; - - /* use internal clock */ - if (PTR_ERR(st->mclk) == -ENOENT) { - if (of_property_read_bool(np, "adi,int-clock-output-enable")) - clock_sel = AD7192_CLK_INT_CO; - } else { - if (of_property_read_bool(np, "adi,clock-xtal")) - clock_sel = AD7192_CLK_EXT_MCLK1_2; - else - clock_sel = AD7192_CLK_EXT_MCLK2; - } - - return clock_sel; -} - -static int ad7192_setup(struct ad7192_state *st, struct device_node *np) -{ - struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi); - bool rej60_en, refin2_en; - bool buf_en, bipolar, burnout_curr_en; - unsigned long long scale_uv; - int i, ret, id; - - /* reset the serial interface */ - ret = ad_sd_reset(&st->sd, 48); - if (ret < 0) - return ret; - usleep_range(500, 1000); /* Wait for at least 500us */ - - /* write/read test for device presence */ - ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id); - if (ret) - return ret; - - id &= AD7192_ID_MASK; - - if (id != st->devid) - dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n", - id); - - st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | - AD7192_MODE_CLKSRC(st->clock_sel) | - AD7192_MODE_RATE(480); - - st->conf = AD7192_CONF_GAIN(0); - - rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); - if (rej60_en) - st->mode |= AD7192_MODE_REJ60; - - refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable"); - if (refin2_en && st->devid != ID_AD7195) - st->conf |= AD7192_CONF_REFSEL; - - st->conf &= ~AD7192_CONF_CHOP; - st->f_order = AD7192_NO_SYNC_FILTER; - - buf_en = of_property_read_bool(np, "adi,buffer-enable"); - if (buf_en) - st->conf |= AD7192_CONF_BUF; - - bipolar = of_property_read_bool(np, "bipolar"); - if (!bipolar) - st->conf |= AD7192_CONF_UNIPOLAR; - - burnout_curr_en = of_property_read_bool(np, - "adi,burnout-currents-enable"); - if (burnout_curr_en && buf_en) { - st->conf |= AD7192_CONF_BURN; - } else if (burnout_curr_en) { - dev_warn(&st->sd.spi->dev, - "Can't enable burnout currents: see CHOP or buffer\n"); - } - - ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); - if (ret) - return ret; - - ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); - if (ret) - return ret; - - ret = ad7192_calibrate_all(st); - if (ret) - return ret; - - /* Populate available ADC input ranges */ - for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { - scale_uv = ((u64)st->int_vref_mv * 100000000) - >> (indio_dev->channels[0].scan_type.realbits - - ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); - scale_uv >>= i; - - st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; - st->scale_avail[i][0] = scale_uv; - } - - return 0; -} - -static ssize_t ad7192_show_ac_excitation(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); -} - -static ssize_t ad7192_show_bridge_switch(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); -} - -static ssize_t ad7192_set(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - int ret; - bool val; - - ret = strtobool(buf, &val); - if (ret < 0) - return ret; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - switch ((u32)this_attr->address) { - case AD7192_REG_GPOCON: - if (val) - st->gpocon |= AD7192_GPOCON_BPDSW; - else - st->gpocon &= ~AD7192_GPOCON_BPDSW; - - ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon); - break; - case AD7192_REG_MODE: - if (val) - st->mode |= AD7192_MODE_ACX; - else - st->mode &= ~AD7192_MODE_ACX; - - ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); - break; - default: - ret = -EINVAL; - } - - iio_device_release_direct_mode(indio_dev); - - return ret ? ret : len; -} - -static void ad7192_get_available_filter_freq(struct ad7192_state *st, - int *freq) -{ - unsigned int fadc; - - /* Formulas for filter at page 25 of the datasheet */ - fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode)); - freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); - - fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode)); - freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); - - fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); - freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024); - freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024); -} - -static ssize_t ad7192_show_filter_avail(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - unsigned int freq_avail[4], i; - size_t len = 0; - - ad7192_get_available_filter_freq(st, freq_avail); - - for (i = 0; i < ARRAY_SIZE(freq_avail); i++) - len += scnprintf(buf + len, PAGE_SIZE - len, - "%d.%d ", freq_avail[i] / 1000, - freq_avail[i] % 1000); - - buf[len - 1] = '\n'; - - return len; -} - -static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available, - 0444, ad7192_show_filter_avail, NULL, 0); - -static IIO_DEVICE_ATTR(bridge_switch_en, 0644, - ad7192_show_bridge_switch, ad7192_set, - AD7192_REG_GPOCON); - -static IIO_DEVICE_ATTR(ac_excitation_en, 0644, - ad7192_show_ac_excitation, ad7192_set, - AD7192_REG_MODE); - -static struct attribute *ad7192_attributes[] = { - &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, - &iio_dev_attr_bridge_switch_en.dev_attr.attr, - &iio_dev_attr_ac_excitation_en.dev_attr.attr, - NULL -}; - -static const struct attribute_group ad7192_attribute_group = { - .attrs = ad7192_attributes, -}; - -static struct attribute *ad7195_attributes[] = { - &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, - &iio_dev_attr_bridge_switch_en.dev_attr.attr, - NULL -}; - -static const struct attribute_group ad7195_attribute_group = { - .attrs = ad7195_attributes, -}; - -static unsigned int ad7192_get_temp_scale(bool unipolar) -{ - return unipolar ? 2815 * 2 : 2815; -} - -static int ad7192_set_3db_filter_freq(struct ad7192_state *st, - int val, int val2) -{ - int freq_avail[4], i, ret, freq; - unsigned int diff_new, diff_old; - int idx = 0; - - diff_old = U32_MAX; - freq = val * 1000 + val2; - - ad7192_get_available_filter_freq(st, freq_avail); - - for (i = 0; i < ARRAY_SIZE(freq_avail); i++) { - diff_new = abs(freq - freq_avail[i]); - if (diff_new < diff_old) { - diff_old = diff_new; - idx = i; - } - } - - switch (idx) { - case 0: - st->f_order = AD7192_SYNC4_FILTER; - st->mode &= ~AD7192_MODE_SINC3; - - st->conf |= AD7192_CONF_CHOP; - break; - case 1: - st->f_order = AD7192_SYNC3_FILTER; - st->mode |= AD7192_MODE_SINC3; - - st->conf |= AD7192_CONF_CHOP; - break; - case 2: - st->f_order = AD7192_NO_SYNC_FILTER; - st->mode &= ~AD7192_MODE_SINC3; - - st->conf &= ~AD7192_CONF_CHOP; - break; - case 3: - st->f_order = AD7192_NO_SYNC_FILTER; - st->mode |= AD7192_MODE_SINC3; - - st->conf &= ~AD7192_CONF_CHOP; - break; - } - - ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); - if (ret < 0) - return ret; - - return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); -} - -static int ad7192_get_3db_filter_freq(struct ad7192_state *st) -{ - unsigned int fadc; - - fadc = DIV_ROUND_CLOSEST(st->fclk, - st->f_order * AD7192_MODE_RATE(st->mode)); - - if (st->conf & AD7192_CONF_CHOP) - return DIV_ROUND_CLOSEST(fadc * 240, 1024); - if (st->mode & AD7192_MODE_SINC3) - return DIV_ROUND_CLOSEST(fadc * 272, 1024); - else - return DIV_ROUND_CLOSEST(fadc * 230, 1024); -} - -static int ad7192_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long m) -{ - struct ad7192_state *st = iio_priv(indio_dev); - bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); - - switch (m) { - case IIO_CHAN_INFO_RAW: - return ad_sigma_delta_single_conversion(indio_dev, chan, val); - case IIO_CHAN_INFO_SCALE: - switch (chan->type) { - case IIO_VOLTAGE: - mutex_lock(&st->lock); - *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; - *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; - mutex_unlock(&st->lock); - return IIO_VAL_INT_PLUS_NANO; - case IIO_TEMP: - *val = 0; - *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); - return IIO_VAL_INT_PLUS_NANO; - default: - return -EINVAL; - } - case IIO_CHAN_INFO_OFFSET: - if (!unipolar) - *val = -(1 << (chan->scan_type.realbits - 1)); - else - *val = 0; - /* Kelvin to Celsius */ - if (chan->type == IIO_TEMP) - *val -= 273 * ad7192_get_temp_scale(unipolar); - return IIO_VAL_INT; - case IIO_CHAN_INFO_SAMP_FREQ: - *val = st->fclk / - (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); - return IIO_VAL_INT; - case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: - *val = ad7192_get_3db_filter_freq(st); - *val2 = 1000; - return IIO_VAL_FRACTIONAL; - } - - return -EINVAL; -} - -static int ad7192_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) -{ - struct ad7192_state *st = iio_priv(indio_dev); - int ret, i, div; - unsigned int tmp; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - switch (mask) { - case IIO_CHAN_INFO_SCALE: - ret = -EINVAL; - mutex_lock(&st->lock); - for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) - if (val2 == st->scale_avail[i][1]) { - ret = 0; - tmp = st->conf; - st->conf &= ~AD7192_CONF_GAIN(-1); - st->conf |= AD7192_CONF_GAIN(i); - if (tmp == st->conf) - break; - ad_sd_write_reg(&st->sd, AD7192_REG_CONF, - 3, st->conf); - ad7192_calibrate_all(st); - break; - } - mutex_unlock(&st->lock); - break; - case IIO_CHAN_INFO_SAMP_FREQ: - if (!val) { - ret = -EINVAL; - break; - } - - div = st->fclk / (val * st->f_order * 1024); - if (div < 1 || div > 1023) { - ret = -EINVAL; - break; - } - - st->mode &= ~AD7192_MODE_RATE(-1); - st->mode |= AD7192_MODE_RATE(div); - ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); - break; - case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: - ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000); - break; - default: - ret = -EINVAL; - } - - iio_device_release_direct_mode(indio_dev); - - return ret; -} - -static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - long mask) -{ - switch (mask) { - case IIO_CHAN_INFO_SCALE: - return IIO_VAL_INT_PLUS_NANO; - case IIO_CHAN_INFO_SAMP_FREQ: - return IIO_VAL_INT; - case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: - return IIO_VAL_INT_PLUS_MICRO; - default: - return -EINVAL; - } -} - -static int ad7192_read_avail(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - const int **vals, int *type, int *length, - long mask) -{ - struct ad7192_state *st = iio_priv(indio_dev); - - switch (mask) { - case IIO_CHAN_INFO_SCALE: - *vals = (int *)st->scale_avail; - *type = IIO_VAL_INT_PLUS_NANO; - /* Values are stored in a 2D matrix */ - *length = ARRAY_SIZE(st->scale_avail) * 2; - - return IIO_AVAIL_LIST; - } - - return -EINVAL; -} - -static const struct iio_info ad7192_info = { - .read_raw = ad7192_read_raw, - .write_raw = ad7192_write_raw, - .write_raw_get_fmt = ad7192_write_raw_get_fmt, - .read_avail = ad7192_read_avail, - .attrs = &ad7192_attribute_group, - .validate_trigger = ad_sd_validate_trigger, -}; - -static const struct iio_info ad7195_info = { - .read_raw = ad7192_read_raw, - .write_raw = ad7192_write_raw, - .write_raw_get_fmt = ad7192_write_raw_get_fmt, - .read_avail = ad7192_read_avail, - .attrs = &ad7195_attribute_group, - .validate_trigger = ad_sd_validate_trigger, -}; - -#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \ - _type, _mask_type_av, _ext_info) \ - { \ - .type = (_type), \ - .differential = ((_channel2) == -1 ? 0 : 1), \ - .indexed = 1, \ - .channel = (_channel1), \ - .channel2 = (_channel2), \ - .address = (_address), \ - .extend_name = (_extend_name), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_OFFSET), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ - BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ - .info_mask_shared_by_type_available = (_mask_type_av), \ - .ext_info = (_ext_info), \ - .scan_index = (_si), \ - .scan_type = { \ - .sign = 'u', \ - .realbits = 24, \ - .storagebits = 32, \ - .endianness = IIO_BE, \ - }, \ - } - -#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \ - __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \ - IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \ - ad7192_calibsys_ext_info) - -#define AD719x_CHANNEL(_si, _channel1, _address) \ - __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \ - BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) - -#define AD719x_SHORTED_CHANNEL(_si, _channel1, _address) \ - __AD719x_CHANNEL(_si, _channel1, -1, _address, "shorted", IIO_VOLTAGE, \ - BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info) - -#define AD719x_TEMP_CHANNEL(_si, _address) \ - __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL) - -static const struct iio_chan_spec ad7192_channels[] = { - AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M), - AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M), - AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP), - AD719x_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M), - AD719x_CHANNEL(4, 1, AD7192_CH_AIN1), - AD719x_CHANNEL(5, 2, AD7192_CH_AIN2), - AD719x_CHANNEL(6, 3, AD7192_CH_AIN3), - AD719x_CHANNEL(7, 4, AD7192_CH_AIN4), - IIO_CHAN_SOFT_TIMESTAMP(8), -}; - -static const struct iio_chan_spec ad7193_channels[] = { - AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M), - AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M), - AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M), - AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M), - AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP), - AD719x_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M), - AD719x_CHANNEL(6, 1, AD7193_CH_AIN1), - AD719x_CHANNEL(7, 2, AD7193_CH_AIN2), - AD719x_CHANNEL(8, 3, AD7193_CH_AIN3), - AD719x_CHANNEL(9, 4, AD7193_CH_AIN4), - AD719x_CHANNEL(10, 5, AD7193_CH_AIN5), - AD719x_CHANNEL(11, 6, AD7193_CH_AIN6), - AD719x_CHANNEL(12, 7, AD7193_CH_AIN7), - AD719x_CHANNEL(13, 8, AD7193_CH_AIN8), - IIO_CHAN_SOFT_TIMESTAMP(14), -}; - -static int ad7192_channels_config(struct iio_dev *indio_dev) -{ - struct ad7192_state *st = iio_priv(indio_dev); - - switch (st->devid) { - case ID_AD7193: - indio_dev->channels = ad7193_channels; - indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); - break; - default: - indio_dev->channels = ad7192_channels; - indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); - break; - } - - return 0; -} - -static const struct of_device_id ad7192_of_match[]; - -static int ad7192_probe(struct spi_device *spi) -{ - const struct of_device_id *match; - struct ad7192_state *st; - struct iio_dev *indio_dev; - int ret, voltage_uv = 0; - - if (!spi->irq) { - dev_err(&spi->dev, "no IRQ?\n"); - return -ENODEV; - } - - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - - st = iio_priv(indio_dev); - - mutex_init(&st->lock); - - st->avdd = devm_regulator_get(&spi->dev, "avdd"); - if (IS_ERR(st->avdd)) - return PTR_ERR(st->avdd); - - ret = regulator_enable(st->avdd); - if (ret) { - dev_err(&spi->dev, "Failed to enable specified AVdd supply\n"); - return ret; - } - - st->dvdd = devm_regulator_get(&spi->dev, "dvdd"); - if (IS_ERR(st->dvdd)) { - ret = PTR_ERR(st->dvdd); - goto error_disable_avdd; - } - - ret = regulator_enable(st->dvdd); - if (ret) { - dev_err(&spi->dev, "Failed to enable specified DVdd supply\n"); - goto error_disable_avdd; - } - - voltage_uv = regulator_get_voltage(st->avdd); - - if (voltage_uv) { - st->int_vref_mv = voltage_uv / 1000; - } else { - ret = voltage_uv; - dev_err(&spi->dev, "Device tree error, reference voltage undefined\n"); - goto error_disable_avdd; - } - - match = of_match_device(ad7192_of_match, &spi->dev); - if (!match) - return -EINVAL; - - spi_set_drvdata(spi, indio_dev); - st->devid = (unsigned long)match->data; - indio_dev->dev.parent = &spi->dev; - indio_dev->name = spi_get_device_id(spi)->name; - indio_dev->modes = INDIO_DIRECT_MODE; - - ret = ad7192_channels_config(indio_dev); - if (ret < 0) - goto error_disable_dvdd; - - if (st->devid == ID_AD7195) - indio_dev->info = &ad7195_info; - else - indio_dev->info = &ad7192_info; - - ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info); - - ret = ad_sd_setup_buffer_and_trigger(indio_dev); - if (ret) - goto error_disable_dvdd; - - st->fclk = AD7192_INT_FREQ_MHZ; - - st->mclk = devm_clk_get(&st->sd.spi->dev, "mclk"); - if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) { - ret = PTR_ERR(st->mclk); - goto error_remove_trigger; - } - - st->clock_sel = ad7192_of_clock_select(st); - - if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 || - st->clock_sel == AD7192_CLK_EXT_MCLK2) { - ret = clk_prepare_enable(st->mclk); - if (ret < 0) - goto error_remove_trigger; - - st->fclk = clk_get_rate(st->mclk); - if (!ad7192_valid_external_frequency(st->fclk)) { - ret = -EINVAL; - dev_err(&spi->dev, - "External clock frequency out of bounds\n"); - goto error_disable_clk; - } - } - - ret = ad7192_setup(st, spi->dev.of_node); - if (ret) - goto error_disable_clk; - - ret = iio_device_register(indio_dev); - if (ret < 0) - goto error_disable_clk; - - return 0; - -error_disable_clk: - clk_disable_unprepare(st->mclk); -error_remove_trigger: - ad_sd_cleanup_buffer_and_trigger(indio_dev); -error_disable_dvdd: - regulator_disable(st->dvdd); -error_disable_avdd: - regulator_disable(st->avdd); - - return ret; -} - -static int ad7192_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct ad7192_state *st = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - clk_disable_unprepare(st->mclk); - ad_sd_cleanup_buffer_and_trigger(indio_dev); - - regulator_disable(st->dvdd); - regulator_disable(st->avdd); - - return 0; -} - -static const struct of_device_id ad7192_of_match[] = { - { .compatible = "adi,ad7190", .data = (void *)ID_AD7190}, - { .compatible = "adi,ad7192", .data = (void *)ID_AD7192 }, - { .compatible = "adi,ad7193", .data = (void *)ID_AD7193 }, - { .compatible = "adi,ad7195", .data = (void *)ID_AD7195 }, - {} -}; - -MODULE_DEVICE_TABLE(of, ad7192_of_match); - -static struct spi_driver ad7192_driver = { - .driver = { - .name = "ad7192", - .of_match_table = ad7192_of_match, - }, - .probe = ad7192_probe, - .remove = ad7192_remove, -}; -module_spi_driver(ad7192_driver); - -MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); -MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC"); -MODULE_LICENSE("GPL v2");
Move ad7192 ADC driver out of staging into mainline. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> --- MAINTAINERS | 8 + drivers/iio/adc/Kconfig | 12 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad7192.c | 1043 ++++++++++++++++++++++++++++++ drivers/staging/iio/adc/Kconfig | 12 - drivers/staging/iio/adc/Makefile | 1 - drivers/staging/iio/adc/ad7192.c | 1043 ------------------------------ 7 files changed, 1064 insertions(+), 1056 deletions(-) create mode 100644 drivers/iio/adc/ad7192.c delete mode 100644 drivers/staging/iio/adc/ad7192.c