diff mbox series

[15/28] x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*()

Message ID 2577606.BoWb2c14C5@kreacher (mailing list archive)
State Deferred
Headers show
Series PM: QoS: Get rid of unuseful code and rework CPU latency QoS interface | expand

Commit Message

Rafael J. Wysocki Feb. 11, 2020, 11:10 p.m. UTC
From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

Call cpu_latency_qos_add/update/remove_request() instead of
pm_qos_add/update/remove_request(), respectively, because the
latter are going to be dropped.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 arch/x86/platform/intel/iosf_mbi.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

Comments

Andy Shevchenko Feb. 12, 2020, 10:14 a.m. UTC | #1
On Wed, Feb 12, 2020 at 12:10:00AM +0100, Rafael J. Wysocki wrote:
> From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
> 
> Call cpu_latency_qos_add/update/remove_request() instead of
> pm_qos_add/update/remove_request(), respectively, because the
> latter are going to be dropped.
> 
> No intentional functional impact.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>  arch/x86/platform/intel/iosf_mbi.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/x86/platform/intel/iosf_mbi.c b/arch/x86/platform/intel/iosf_mbi.c
> index 9e2444500428..526f70f27c1c 100644
> --- a/arch/x86/platform/intel/iosf_mbi.c
> +++ b/arch/x86/platform/intel/iosf_mbi.c
> @@ -265,7 +265,7 @@ static void iosf_mbi_reset_semaphore(void)
>  			    iosf_mbi_sem_address, 0, PUNIT_SEMAPHORE_BIT))
>  		dev_err(&mbi_pdev->dev, "Error P-Unit semaphore reset failed\n");
>  
> -	pm_qos_update_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
> +	cpu_latency_qos_update_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
>  
>  	blocking_notifier_call_chain(&iosf_mbi_pmic_bus_access_notifier,
>  				     MBI_PMIC_BUS_ACCESS_END, NULL);
> @@ -301,8 +301,8 @@ static void iosf_mbi_reset_semaphore(void)
>   * 4) When CPU cores enter C6 or C7 the P-Unit needs to talk to the PMIC
>   *    if this happens while the kernel itself is accessing the PMIC I2C bus
>   *    the SoC hangs.
> - *    As the third step we call pm_qos_update_request() to disallow the CPU
> - *    to enter C6 or C7.
> + *    As the third step we call cpu_latency_qos_update_request() to disallow the
> + *    CPU to enter C6 or C7.
>   *
>   * 5) The P-Unit has a PMIC bus semaphore which we can request to stop
>   *    autonomous P-Unit tasks from accessing the PMIC I2C bus while we hold it.
> @@ -338,7 +338,7 @@ int iosf_mbi_block_punit_i2c_access(void)
>  	 * requires the P-Unit to talk to the PMIC and if this happens while
>  	 * we're holding the semaphore, the SoC hangs.
>  	 */
> -	pm_qos_update_request(&iosf_mbi_pm_qos, 0);
> +	cpu_latency_qos_update_request(&iosf_mbi_pm_qos, 0);
>  
>  	/* host driver writes to side band semaphore register */
>  	ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
> @@ -547,8 +547,7 @@ static int __init iosf_mbi_init(void)
>  {
>  	iosf_debugfs_init();
>  
> -	pm_qos_add_request(&iosf_mbi_pm_qos, PM_QOS_CPU_DMA_LATENCY,
> -			   PM_QOS_DEFAULT_VALUE);
> +	cpu_latency_qos_add_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
>  
>  	return pci_register_driver(&iosf_mbi_pci_driver);
>  }
> @@ -561,7 +560,7 @@ static void __exit iosf_mbi_exit(void)
>  	pci_dev_put(mbi_pdev);
>  	mbi_pdev = NULL;
>  
> -	pm_qos_remove_request(&iosf_mbi_pm_qos);
> +	cpu_latency_qos_remove_request(&iosf_mbi_pm_qos);
>  }
>  
>  module_init(iosf_mbi_init);
> -- 
> 2.16.4
> 
> 
> 
> 
>
diff mbox series

Patch

diff --git a/arch/x86/platform/intel/iosf_mbi.c b/arch/x86/platform/intel/iosf_mbi.c
index 9e2444500428..526f70f27c1c 100644
--- a/arch/x86/platform/intel/iosf_mbi.c
+++ b/arch/x86/platform/intel/iosf_mbi.c
@@ -265,7 +265,7 @@  static void iosf_mbi_reset_semaphore(void)
 			    iosf_mbi_sem_address, 0, PUNIT_SEMAPHORE_BIT))
 		dev_err(&mbi_pdev->dev, "Error P-Unit semaphore reset failed\n");
 
-	pm_qos_update_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
+	cpu_latency_qos_update_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
 
 	blocking_notifier_call_chain(&iosf_mbi_pmic_bus_access_notifier,
 				     MBI_PMIC_BUS_ACCESS_END, NULL);
@@ -301,8 +301,8 @@  static void iosf_mbi_reset_semaphore(void)
  * 4) When CPU cores enter C6 or C7 the P-Unit needs to talk to the PMIC
  *    if this happens while the kernel itself is accessing the PMIC I2C bus
  *    the SoC hangs.
- *    As the third step we call pm_qos_update_request() to disallow the CPU
- *    to enter C6 or C7.
+ *    As the third step we call cpu_latency_qos_update_request() to disallow the
+ *    CPU to enter C6 or C7.
  *
  * 5) The P-Unit has a PMIC bus semaphore which we can request to stop
  *    autonomous P-Unit tasks from accessing the PMIC I2C bus while we hold it.
@@ -338,7 +338,7 @@  int iosf_mbi_block_punit_i2c_access(void)
 	 * requires the P-Unit to talk to the PMIC and if this happens while
 	 * we're holding the semaphore, the SoC hangs.
 	 */
-	pm_qos_update_request(&iosf_mbi_pm_qos, 0);
+	cpu_latency_qos_update_request(&iosf_mbi_pm_qos, 0);
 
 	/* host driver writes to side band semaphore register */
 	ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
@@ -547,8 +547,7 @@  static int __init iosf_mbi_init(void)
 {
 	iosf_debugfs_init();
 
-	pm_qos_add_request(&iosf_mbi_pm_qos, PM_QOS_CPU_DMA_LATENCY,
-			   PM_QOS_DEFAULT_VALUE);
+	cpu_latency_qos_add_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
 
 	return pci_register_driver(&iosf_mbi_pci_driver);
 }
@@ -561,7 +560,7 @@  static void __exit iosf_mbi_exit(void)
 	pci_dev_put(mbi_pdev);
 	mbi_pdev = NULL;
 
-	pm_qos_remove_request(&iosf_mbi_pm_qos);
+	cpu_latency_qos_remove_request(&iosf_mbi_pm_qos);
 }
 
 module_init(iosf_mbi_init);