diff mbox series

clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

Message ID 20200114162503.7548-1-justin.swartz@risingedge.co.za (mailing list archive)
State Mainlined
Commit cec9d101d70a3509da9bd2e601e0b242154ce616
Headers show
Series clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks | expand

Commit Message

Justin Swartz Jan. 14, 2020, 4:25 p.m. UTC 
The following changes prevent the unrecoverable freezes and rcu_sched
stall warnings experienced in each of my attempts to take advantage of
lima.

Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
instead makes uses of the aclk_gpu PLL source gate and parent names
defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.

Remove the now unused mux_aclk_gpu_pre_p and the four named but also
unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
of the aclk_gpu PLL source gate.

Use the correct gate offset for aclk_gpu and aclk_gpu_noc.

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
---
 drivers/clk/rockchip/clk-rk3228.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

Comments

Heiko Stübner Feb. 12, 2020, 10:36 p.m. UTC | #1 
Hi Justin,

Am Dienstag, 14. Januar 2020, 17:25:02 CET schrieb Justin Swartz:
> The following changes prevent the unrecoverable freezes and rcu_sched
> stall warnings experienced in each of my attempts to take advantage of
> lima.
> 
> Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
> COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
> instead makes uses of the aclk_gpu PLL source gate and parent names
> defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.
> 
> Remove the now unused mux_aclk_gpu_pre_p and the four named but also
> unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
> of the aclk_gpu PLL source gate.
> 
> Use the correct gate offset for aclk_gpu and aclk_gpu_noc.
> 
> Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>

thanks a lot for diving through the clock controller and fixing the
issues. I've checked against the TRM as well and the previous state
was quite wrong and your changes match the hardware manual.

I've applied it as fix for 5.6 now.

Thanks
Heiko
diff mbox series

Patch

diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index d17cfb7a3..d7243c09c 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -156,8 +156,6 @@  PNAME(mux_i2s_out_p)		= { "i2s1_pre", "xin12m" };
 PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "xin12m" };
 PNAME(mux_sclk_spdif_p)		= { "sclk_spdif_src", "spdif_frac", "xin12m" };
 
-PNAME(mux_aclk_gpu_pre_p)	= { "cpll_gpu", "gpll_gpu", "hdmiphy_gpu", "usb480m_gpu" };
-
 PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
@@ -468,16 +466,9 @@  static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(24), 6, 10, DFLAGS,
 			RK2928_CLKGATE_CON(2), 8, GFLAGS),
 
-	GATE(0, "cpll_gpu", "cpll", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "gpll_gpu", "gpll", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "hdmiphy_gpu", "hdmiphy", 0,
-			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	GATE(0, "usb480m_gpu", "usb480m", 0,
+	COMPOSITE(0, "aclk_gpu_pre", mux_pll_src_4plls_p, 0,
+			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS,
 			RK2928_CLKGATE_CON(3), 13, GFLAGS),
-	COMPOSITE_NOGATE(0, "aclk_gpu_pre", mux_aclk_gpu_pre_p, 0,
-			RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS),
 
 	COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_2plls_p, 0,
 			RK2928_CLKSEL_CON(25), 8, 1, MFLAGS, 0, 7, DFLAGS,
@@ -582,8 +573,8 @@  static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 	GATE(0, "pclk_peri_noc", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 2, GFLAGS),
 
 	/* PD_GPU */
-	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS),
-	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS),
+	GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 14, GFLAGS),
+	GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
 
 	/* PD_BUS */
 	GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),