diff mbox series

[v3,3/3] ARM: dts: sun7i: Add LVDS panel support on A20

Message ID 20200213201854.810-3-andrey.lebedev@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/1] Support LVDS output on Allwinner A20 | expand

Commit Message

Andrey Lebedev Feb. 13, 2020, 8:18 p.m. UTC 
From: Andrey Lebedev <andrey@lebedev.lt>

Define pins for LVDS channels 0 and 1, configure reset line for tcon0 and
provide sample LVDS panel, connected to tcon0.

Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

Comments

Maxime Ripard Feb. 14, 2020, 8:55 a.m. UTC | #1 
On Thu, Feb 13, 2020 at 10:18:57PM +0200, Andrey Lebedev wrote:
> From: Andrey Lebedev <andrey@lebedev.lt>
>
> Define pins for LVDS channels 0 and 1, configure reset line for tcon0 and
> provide sample LVDS panel, connected to tcon0.
>
> Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
> ---
>  arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++++++++++++--
>  1 file changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 92b5be97085d..3b3c366a2bee 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -47,6 +47,7 @@
>  #include <dt-bindings/dma/sun4i-a10.h>
>  #include <dt-bindings/clock/sun7i-a20-ccu.h>
>  #include <dt-bindings/reset/sun4i-a10-ccu.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>
>  / {
>  	interrupt-parent = <&gic>;
> @@ -407,8 +408,8 @@
>  			compatible = "allwinner,sun7i-a20-tcon";
>  			reg = <0x01c0c000 0x1000>;
>  			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> -			resets = <&ccu RST_TCON0>;
> -			reset-names = "lcd";
> +			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
> +			reset-names = "lcd", "lvds";
>  			clocks = <&ccu CLK_AHB_LCD0>,
>  				 <&ccu CLK_TCON0_CH0>,
>  				 <&ccu CLK_TCON0_CH1>;
> @@ -444,6 +445,11 @@
>  					#size-cells = <0>;
>  					reg = <1>;
>
> +					tcon0_out_lvds: endpoint@0 {
> +						reg = <0>;
> +						allwinner,tcon-channel = <0>;
> +					};
> +
>  					tcon0_out_hdmi: endpoint@1 {
>  						reg = <1>;
>  						remote-endpoint = <&hdmi_in_tcon0>;
> @@ -1162,6 +1168,24 @@
>  				pins = "PI20", "PI21";
>  				function = "uart7";
>  			};
> +
> +			/omit-if-no-ref/
> +			lcd_lvds0_pins: lcd-lvds0-pins {

The nodes here should be ordered by alphabetical order

> +				pins =

I'm not sure why you need a new line here

> +					"PD0", "PD1", "PD2", "PD3", "PD4",
> +					"PD5", "PD6", "PD7", "PD8", "PD9";
> +				function = "lvds0";
> +				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

And allwinner,drive is also deprecated and at its default value anyway

Maxime
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 92b5be97085d..3b3c366a2bee 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -47,6 +47,7 @@ 
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/clock/sun7i-a20-ccu.h>
 #include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -407,8 +408,8 @@ 
 			compatible = "allwinner,sun7i-a20-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_TCON0>;
-			reset-names = "lcd";
+			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB_LCD0>,
 				 <&ccu CLK_TCON0_CH0>,
 				 <&ccu CLK_TCON0_CH1>;
@@ -444,6 +445,11 @@ 
 					#size-cells = <0>;
 					reg = <1>;
 
+					tcon0_out_lvds: endpoint@0 {
+						reg = <0>;
+						allwinner,tcon-channel = <0>;
+					};
+
 					tcon0_out_hdmi: endpoint@1 {
 						reg = <1>;
 						remote-endpoint = <&hdmi_in_tcon0>;
@@ -1162,6 +1168,24 @@ 
 				pins = "PI20", "PI21";
 				function = "uart7";
 			};
+
+			/omit-if-no-ref/
+			lcd_lvds0_pins: lcd-lvds0-pins {
+				pins =
+					"PD0", "PD1", "PD2", "PD3", "PD4",
+					"PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds1_pins: lcd-lvds1-pins {
+				pins =
+					"PD10", "PD11", "PD12", "PD13", "PD14",
+					"PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+			};
 		};
 
 		timer@1c20c00 {