[v2] Bluetooth: hci_h5: btrtl: Add support for RTL8822C

Commit Message

Max Chou Feb. 17, 2020, 8:14 a.m. UTC

From: Max Chou <[e-mail]>

Add new compatible and FW loading support for RTL8822C.

Signed-off-by: Max Chou <[e-mail]>
---
Changes in v2:
- Separate the code description for ACPI and OF
- Note that forgiving my less experience, I can not find bt3wire.c from the
upstream. I just find hci_h5.c can support Realtek Bluetooth controller,
so I modify the code here for new chip support.
---
 drivers/bluetooth/Kconfig  |  2 +-
 drivers/bluetooth/btrtl.c  | 12 ++++++++++++
 drivers/bluetooth/hci_h5.c | 19 +++++++++++++++++++
 3 files changed, 32 insertions(+), 1 deletion(-)

Comments

Marcel Holtmann Feb. 18, 2020, 8:26 a.m. UTC | #1

Hi Max,

> Add new compatible and FW loading support for RTL8822C.
> 
> Signed-off-by: Max Chou <[e-mail]>
> ---
> Changes in v2:
> - Separate the code description for ACPI and OF
> - Note that forgiving my less experience, I can not find bt3wire.c from the
> upstream. I just find hci_h5.c can support Realtek Bluetooth controller,
> so I modify the code here for new chip support.
> ---
> drivers/bluetooth/Kconfig  |  2 +-
> drivers/bluetooth/btrtl.c  | 12 ++++++++++++
> drivers/bluetooth/hci_h5.c | 19 +++++++++++++++++++
> 3 files changed, 32 insertions(+), 1 deletion(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel

Patch

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index f7aa2dc1ff85..052020b07e56 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -211,7 +211,7 @@  config BT_HCIUART_RTL
 	depends on BT_HCIUART
 	depends on BT_HCIUART_SERDEV
 	depends on GPIOLIB
-	depends on ACPI
+	depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
 	select BT_HCIUART_3WIRE
 	select BT_RTL
 	help
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 577cfa3329db..67f4bc21e7c5 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -136,6 +136,18 @@  static const struct id_table ic_id_table[] = {
 	  .fw_name  = "rtl_bt/rtl8761a_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8761a_config" },
 
+	/* 8822C with UART interface */
+	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
+			 IC_MATCH_FL_HCIBUS,
+	  .lmp_subver = RTL_ROM_LMP_8822B,
+	  .hci_rev = 0x000c,
+	  .hci_ver = 0x0a,
+	  .hci_bus = HCI_UART,
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8822cs_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8822cs_config" },
+
 	/* 8822C with USB interface */
 	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc),
 	  .config_needed = false,
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 0b14547482a7..4e4d58a73295 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -11,6 +11,7 @@ 
 #include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
 #include <linux/serdev.h>
 #include <linux/skbuff.h>
 
@@ -786,6 +787,7 @@  static const struct hci_uart_proto h5p = {
 static int h5_serdev_probe(struct serdev_device *serdev)
 {
 	const struct acpi_device_id *match;
+	const void *data;
 	struct device *dev = &serdev->dev;
 	struct h5 *h5;
 
@@ -810,8 +812,15 @@  static int h5_serdev_probe(struct serdev_device *serdev)
 		if (h5->vnd->acpi_gpio_map)
 			devm_acpi_dev_add_driver_gpios(dev,
 						       h5->vnd->acpi_gpio_map);
+	} else {
+		data = of_device_get_match_data(dev);
+		if (!data)
+			return -ENODEV;
+
+		h5->vnd = (const struct h5_vnd *)data;
 	}
 
+
 	h5->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
 	if (IS_ERR(h5->enable_gpio))
 		return PTR_ERR(h5->enable_gpio);
@@ -1003,6 +1012,15 @@  static const struct dev_pm_ops h5_serdev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(h5_serdev_suspend, h5_serdev_resume)
 };
 
+static const struct of_device_id rtl_bluetooth_of_match[] = {
+#ifdef CONFIG_BT_HCIUART_RTL
+	{ .compatible = "realtek,rtl8822cs-bt",
+	  .data = (const void *)&rtl_vnd },
+#endif
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rtl_bluetooth_of_match);
+
 static struct serdev_device_driver h5_serdev_driver = {
 	.probe = h5_serdev_probe,
 	.remove = h5_serdev_remove,
@@ -1010,6 +1028,7 @@  static struct serdev_device_driver h5_serdev_driver = {
 		.name = "hci_uart_h5",
 		.acpi_match_table = ACPI_PTR(h5_acpi_match),
 		.pm = &h5_serdev_pm_ops,
+		.of_match_table = rtl_bluetooth_of_match,
 	},
 };