| Message ID | a1f7d34b7281c4e40307f67fce9a5c435ee5e7eb.1580390127.git.amit.kucheria@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | thermal: tsens: Handle critical interrupts | expand |
On Thu 30 Jan 05:27 PST 2020, Amit Kucheria wrote: > TSENS IP v2.3 onwards adds support for a watchdog to detect if the TSENS > HW FSM is stuck. Add support to detect and restart the FSM in the > driver. The watchdog is configured by the bootloader, we just enable the > watchdog bark as a debug feature in the kernel. > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> > --- > drivers/thermal/qcom/tsens-common.c | 43 +++++++++++++++++++++++++++++ > drivers/thermal/qcom/tsens-v2.c | 10 +++++++ > drivers/thermal/qcom/tsens.h | 14 ++++++++++ > 3 files changed, 67 insertions(+) > > diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c > index 9d1594d2f1ed..ee2414f33606 100644 > --- a/drivers/thermal/qcom/tsens-common.c > +++ b/drivers/thermal/qcom/tsens-common.c > @@ -377,6 +377,26 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data) > struct tsens_irq_data d; > unsigned long flags; > int temp, ret, i; > + u32 wdog_status, wdog_count; > + > + if (priv->feat->has_watchdog) { > + ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], &wdog_status); > + if (ret) > + return ret; > + > + if (wdog_status) { > + /* Clear WDOG interrupt */ > + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1); > + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0); > + ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], &wdog_count); > + if (ret) > + return ret; > + if (wdog_count) > + dev_dbg(priv->dev, "%s: watchdog count: %d\n", __func__, wdog_count); > + > + return IRQ_HANDLED; Patch looks good, but would is make sense to fall through and handle critical interrupts as well (both in positive and error cases of this hunk)? Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn
On Tue, Feb 4, 2020 at 12:12 AM Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Thu 30 Jan 05:27 PST 2020, Amit Kucheria wrote: > > > TSENS IP v2.3 onwards adds support for a watchdog to detect if the TSENS > > HW FSM is stuck. Add support to detect and restart the FSM in the > > driver. The watchdog is configured by the bootloader, we just enable the > > watchdog bark as a debug feature in the kernel. > > > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> > > --- > > drivers/thermal/qcom/tsens-common.c | 43 +++++++++++++++++++++++++++++ > > drivers/thermal/qcom/tsens-v2.c | 10 +++++++ > > drivers/thermal/qcom/tsens.h | 14 ++++++++++ > > 3 files changed, 67 insertions(+) > > > > diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c > > index 9d1594d2f1ed..ee2414f33606 100644 > > --- a/drivers/thermal/qcom/tsens-common.c > > +++ b/drivers/thermal/qcom/tsens-common.c > > @@ -377,6 +377,26 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data) > > struct tsens_irq_data d; > > unsigned long flags; > > int temp, ret, i; > > + u32 wdog_status, wdog_count; > > + > > + if (priv->feat->has_watchdog) { > > + ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], &wdog_status); > > + if (ret) > > + return ret; > > + > > + if (wdog_status) { > > + /* Clear WDOG interrupt */ > > + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1); > > + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0); > > + ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], &wdog_count); > > + if (ret) > > + return ret; > > + if (wdog_count) > > + dev_dbg(priv->dev, "%s: watchdog count: %d\n", __func__, wdog_count); > > + > > + return IRQ_HANDLED; > > Patch looks good, but would is make sense to fall through and handle > critical interrupts as well (both in positive and error cases of this > hunk)? Yes, it makes sense. I'll remove the return IRQ_HANDLED and add a comment instead. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > Regards, > Bjorn
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c index 9d1594d2f1ed..ee2414f33606 100644 --- a/drivers/thermal/qcom/tsens-common.c +++ b/drivers/thermal/qcom/tsens-common.c @@ -377,6 +377,26 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data) struct tsens_irq_data d; unsigned long flags; int temp, ret, i; + u32 wdog_status, wdog_count; + + if (priv->feat->has_watchdog) { + ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], &wdog_status); + if (ret) + return ret; + + if (wdog_status) { + /* Clear WDOG interrupt */ + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1); + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0); + ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], &wdog_count); + if (ret) + return ret; + if (wdog_count) + dev_dbg(priv->dev, "%s: watchdog count: %d\n", __func__, wdog_count); + + return IRQ_HANDLED; + } + } for (i = 0; i < priv->num_sensors; i++) { const struct tsens_sensor *s = &priv->sensor[i]; @@ -677,6 +697,7 @@ int __init init_common(struct tsens_priv *priv) { void __iomem *tm_base, *srot_base; struct device *dev = priv->dev; + u32 ver_minor; struct resource *res; u32 enabled; int ret, i, j; @@ -726,6 +747,9 @@ int __init init_common(struct tsens_priv *priv) if (IS_ERR(priv->rf[i])) return PTR_ERR(priv->rf[i]); } + ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor); + if (ret) + goto err_put_device; } priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map, @@ -786,6 +810,25 @@ int __init init_common(struct tsens_priv *priv) } } + if (tsens_version(priv) > VER_1_X && ver_minor > 2) { + /* Watchdog is present only on v2.3+ */ + priv->feat->has_watchdog = 1; + for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) { + priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map, + priv->fields[i]); + if (IS_ERR(priv->rf[i])) { + ret = PTR_ERR(priv->rf[i]); + goto err_put_device; + } + } + /* + * Watchdog is already enabled, unmask the bark. + * Disable cycle completion monitoring + */ + regmap_field_write(priv->rf[WDOG_BARK_MASK], 0); + regmap_field_write(priv->rf[CC_MON_MASK], 1); + } + spin_lock_init(&priv->ul_lock); spin_lock_init(&priv->crit_lock); tsens_enable_irq(priv); diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c index ce5ef0055d13..b293ed32174b 100644 --- a/drivers/thermal/qcom/tsens-v2.c +++ b/drivers/thermal/qcom/tsens-v2.c @@ -24,6 +24,7 @@ #define TM_Sn_CRITICAL_THRESHOLD_OFF 0x0060 #define TM_Sn_STATUS_OFF 0x00a0 #define TM_TRDY_OFF 0x00e4 +#define TM_WDOG_LOG_OFF 0x013c /* v2.x: 8996, 8998, sdm845 */ @@ -66,6 +67,15 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_CLEAR, TM_CRITICAL_INT_CLEAR_OFF), REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_MASK, TM_CRITICAL_INT_MASK_OFF), + /* WATCHDOG on v2.3 or later */ + [WDOG_BARK_STATUS] = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 31, 31), + [WDOG_BARK_CLEAR] = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF, 31, 31), + [WDOG_BARK_MASK] = REG_FIELD(TM_CRITICAL_INT_MASK_OFF, 31, 31), + [CC_MON_STATUS] = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 30, 30), + [CC_MON_CLEAR] = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF, 30, 30), + [CC_MON_MASK] = REG_FIELD(TM_CRITICAL_INT_MASK_OFF, 30, 30), + [WDOG_BARK_COUNT] = REG_FIELD(TM_WDOG_LOG_OFF, 0, 7), + /* Sn_STATUS */ REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 11), REG_FIELD_FOR_EACH_SENSOR16(VALID, TM_Sn_STATUS_OFF, 21, 21), diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index a252619c2399..cf0511a947d4 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -440,6 +440,18 @@ enum regfield_ids { CRIT_THRESH_13, CRIT_THRESH_14, CRIT_THRESH_15, + + /* WATCHDOG */ + WDOG_BARK_STATUS, + WDOG_BARK_CLEAR, + WDOG_BARK_MASK, + WDOG_BARK_COUNT, + + /* CYCLE COMPLETION MONITOR */ + CC_MON_STATUS, + CC_MON_CLEAR, + CC_MON_MASK, + MIN_STATUS_0, /* MIN threshold violated */ MIN_STATUS_1, MIN_STATUS_2, @@ -484,6 +496,7 @@ enum regfield_ids { * @adc: do the sensors only output adc code (instead of temperature)? * @srot_split: does the IP neatly splits the register space into SROT and TM, * with SROT only being available to secure boot firmware? + * @has_watchdog: does this IP support watchdog functionality? * @max_sensors: maximum sensors supported by this version of the IP */ struct tsens_features { @@ -491,6 +504,7 @@ struct tsens_features { unsigned int crit_int:1; unsigned int adc:1; unsigned int srot_split:1; + unsigned int has_watchdog:1; unsigned int max_sensors; };
TSENS IP v2.3 onwards adds support for a watchdog to detect if the TSENS HW FSM is stuck. Add support to detect and restart the FSM in the driver. The watchdog is configured by the bootloader, we just enable the watchdog bark as a debug feature in the kernel. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> --- drivers/thermal/qcom/tsens-common.c | 43 +++++++++++++++++++++++++++++ drivers/thermal/qcom/tsens-v2.c | 10 +++++++ drivers/thermal/qcom/tsens.h | 14 ++++++++++ 3 files changed, 67 insertions(+)