diff mbox series

[v2] ARM: bcm2835_defconfig: add support for Raspberry Pi4

Message ID 20200217155506.5245-1-m.szyprowski@samsung.com (mailing list archive)
State Mainlined
Commit 8068b7b63583764b46416a62856e42fb1f954ab6
Headers show
Series [v2] ARM: bcm2835_defconfig: add support for Raspberry Pi4 | expand

Commit Message

Marek Szyprowski Feb. 17, 2020, 3:55 p.m. UTC 
Add drivers needed to boot Raspberry Pi4 board.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
v2:
- added BCM2711_THERMAL
---
 arch/arm/configs/bcm2835_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Nicolas Saenz Julienne Feb. 19, 2020, 11:12 a.m. UTC | #1 
On Mon, 2020-02-17 at 16:55 +0100, Marek Szyprowski wrote:
> Add drivers needed to boot Raspberry Pi4 board.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---

Patch applied.

Thanks!
Nicolas
diff mbox series

Patch

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 519ff58e67b3..38437541ea76 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -72,6 +72,7 @@  CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
+CONFIG_BCMGENET=y
 CONFIG_USB_LAN78XX=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
@@ -96,9 +97,13 @@  CONFIG_SPI_BCM2835AUX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_THERMAL=y
+CONFIG_BCM2711_THERMAL=y
 CONFIG_BCM2835_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
+CONFIG_MFD_SYSCON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y