| Message ID | 20200220142806.19340-1-m.szyprowski@samsung.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | a5e7a22d73a63dbb8313b2d831bc60419435a841 |
| Headers | show |
| Series | [1/2] ARM: dts: exynos: Fix MMC regulator on Arndale5250 board | expand |
On Thu, Feb 20, 2020 at 03:28:05PM +0100, Marek Szyprowski wrote: > According to the schematic, both eMMC and SDMMC use dedicated fixed > regulators connected directly to the DC5V and MAIN_DC rails. Remove the > GPX1-1 line assigned to the MMC regulator, because such control > connection doesn't exist. Also change its name to VDD_MMC to avoid > conflict with LDO18 output of S5M8767 PMIC. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > arch/arm/boot/dts/exynos5250-arndale.dts | 4 +--- Thanks, applied. Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index f8ebc620f42d..bff24c61212b 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -98,11 +98,9 @@ mmc_reg: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "VDD_33ON_2.8V"; + regulator-name = "VDD_MMC"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; }; reg_hdmi_en: regulator@2 {
According to the schematic, both eMMC and SDMMC use dedicated fixed regulators connected directly to the DC5V and MAIN_DC rails. Remove the GPX1-1 line assigned to the MMC regulator, because such control connection doesn't exist. Also change its name to VDD_MMC to avoid conflict with LDO18 output of S5M8767 PMIC. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- arch/arm/boot/dts/exynos5250-arndale.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)