diff mbox series

[RFC,01/11] vfio: Remove Calxeda XGMAC reset driver

Message ID 20200218171321.30990-2-robh@kernel.org (mailing list archive)
State New, archived
Headers show
Series Removing Calxeda platform support | expand

Commit Message

Rob Herring (Arm) Feb. 18, 2020, 5:13 p.m. UTC 
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
Do not apply yet.

 drivers/vfio/platform/reset/Kconfig           |  8 --
 drivers/vfio/platform/reset/Makefile          |  2 -
 .../reset/vfio_platform_calxedaxgmac.c        | 74 -------------------
 3 files changed, 84 deletions(-)
 delete mode 100644 drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c

--
2.20.1

Comments

Eric Auger Feb. 24, 2020, 1:07 p.m. UTC | #1 
Hi Rob, Alex,

On 2/18/20 6:13 PM, Rob Herring wrote:
> Cc: Eric Auger <eric.auger@redhat.com>
> Cc: Alex Williamson <alex.williamson@redhat.com>
> Cc: Cornelia Huck <cohuck@redhat.com>
> Cc: kvm@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Do not apply yet.
> 
>  drivers/vfio/platform/reset/Kconfig           |  8 --
>  drivers/vfio/platform/reset/Makefile          |  2 -
>  .../reset/vfio_platform_calxedaxgmac.c        | 74 -------------------
>  3 files changed, 84 deletions(-)
>  delete mode 100644 drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
> 
> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
> index 1edbe9ee7356..3668d1d92909 100644
> --- a/drivers/vfio/platform/reset/Kconfig
> +++ b/drivers/vfio/platform/reset/Kconfig
> @@ -1,12 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> -config VFIO_PLATFORM_CALXEDAXGMAC_RESET
> -	tristate "VFIO support for calxeda xgmac reset"
> -	depends on VFIO_PLATFORM
> -	help
> -	  Enables the VFIO platform driver to handle reset for Calxeda xgmac
> -
> -	  If you don't know what to do here, say N.
> -
>  config VFIO_PLATFORM_AMDXGBE_RESET
>  	tristate "VFIO support for AMD XGBE reset"
>  	depends on VFIO_PLATFORM
> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
> index 7294c5ea122e..be7960ce5dbc 100644
> --- a/drivers/vfio/platform/reset/Makefile
> +++ b/drivers/vfio/platform/reset/Makefile
> @@ -1,7 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0
> -vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o
>  vfio-platform-amdxgbe-y := vfio_platform_amdxgbe.o
> 
> -obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>  obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
>  obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
> diff --git a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
> deleted file mode 100644
> index 09a9453b75c5..000000000000
> --- a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
> +++ /dev/null
> @@ -1,74 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * VFIO platform driver specialized for Calxeda xgmac reset
> - * reset code is inherited from calxeda xgmac native driver
> - *
> - * Copyright 2010-2011 Calxeda, Inc.
> - * Copyright (c) 2015 Linaro Ltd.
> - *              www.linaro.org
> - */
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/init.h>
> -#include <linux/io.h>
> -
> -#include "../vfio_platform_private.h"
> -
> -#define DRIVER_VERSION  "0.1"
> -#define DRIVER_AUTHOR   "Eric Auger <eric.auger@linaro.org>"
> -#define DRIVER_DESC     "Reset support for Calxeda xgmac vfio platform device"
> -
> -/* XGMAC Register definitions */
> -#define XGMAC_CONTROL           0x00000000      /* MAC Configuration */
> -
> -/* DMA Control and Status Registers */
> -#define XGMAC_DMA_CONTROL       0x00000f18      /* Ctrl (Operational Mode) */
> -#define XGMAC_DMA_INTR_ENA      0x00000f1c      /* Interrupt Enable */
> -
> -/* DMA Control registe defines */
> -#define DMA_CONTROL_ST          0x00002000      /* Start/Stop Transmission */
> -#define DMA_CONTROL_SR          0x00000002      /* Start/Stop Receive */
> -
> -/* Common MAC defines */
> -#define MAC_ENABLE_TX           0x00000008      /* Transmitter Enable */
> -#define MAC_ENABLE_RX           0x00000004      /* Receiver Enable */
> -
> -static inline void xgmac_mac_disable(void __iomem *ioaddr)
> -{
> -	u32 value = readl(ioaddr + XGMAC_DMA_CONTROL);
> -
> -	value &= ~(DMA_CONTROL_ST | DMA_CONTROL_SR);
> -	writel(value, ioaddr + XGMAC_DMA_CONTROL);
> -
> -	value = readl(ioaddr + XGMAC_CONTROL);
> -	value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);
> -	writel(value, ioaddr + XGMAC_CONTROL);
> -}
> -
> -static int vfio_platform_calxedaxgmac_reset(struct vfio_platform_device *vdev)
> -{
> -	struct vfio_platform_region *reg = &vdev->regions[0];
> -
> -	if (!reg->ioaddr) {
> -		reg->ioaddr =
> -			ioremap(reg->addr, reg->size);
> -		if (!reg->ioaddr)
> -			return -ENOMEM;
> -	}
> -
> -	/* disable IRQ */
> -	writel(0, reg->ioaddr + XGMAC_DMA_INTR_ENA);
> -
> -	/* Disable the MAC core */
> -	xgmac_mac_disable(reg->ioaddr);
> -
> -	return 0;
> -}
> -
> -module_vfio_reset_handler("calxeda,hb-xgmac", vfio_platform_calxedaxgmac_reset);
> -
> -MODULE_VERSION(DRIVER_VERSION);
> -MODULE_LICENSE("GPL v2");
> -MODULE_AUTHOR(DRIVER_AUTHOR);
> -MODULE_DESCRIPTION(DRIVER_DESC);
> --
> 2.20.1
> 
I do not have access to this HW anymore and I use Seattle to test
vfio-platform. So

Acked-by: Eric Auger <eric.auger@redhat.com>

Thanks

Eric
diff mbox series

Patch

diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
index 1edbe9ee7356..3668d1d92909 100644
--- a/drivers/vfio/platform/reset/Kconfig
+++ b/drivers/vfio/platform/reset/Kconfig
@@ -1,12 +1,4 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
-config VFIO_PLATFORM_CALXEDAXGMAC_RESET
-	tristate "VFIO support for calxeda xgmac reset"
-	depends on VFIO_PLATFORM
-	help
-	  Enables the VFIO platform driver to handle reset for Calxeda xgmac
-
-	  If you don't know what to do here, say N.
-
 config VFIO_PLATFORM_AMDXGBE_RESET
 	tristate "VFIO support for AMD XGBE reset"
 	depends on VFIO_PLATFORM
diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
index 7294c5ea122e..be7960ce5dbc 100644
--- a/drivers/vfio/platform/reset/Makefile
+++ b/drivers/vfio/platform/reset/Makefile
@@ -1,7 +1,5 @@ 
 # SPDX-License-Identifier: GPL-2.0
-vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o
 vfio-platform-amdxgbe-y := vfio_platform_amdxgbe.o

-obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
 obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
 obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
diff --git a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
deleted file mode 100644
index 09a9453b75c5..000000000000
--- a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
+++ /dev/null
@@ -1,74 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * VFIO platform driver specialized for Calxeda xgmac reset
- * reset code is inherited from calxeda xgmac native driver
- *
- * Copyright 2010-2011 Calxeda, Inc.
- * Copyright (c) 2015 Linaro Ltd.
- *              www.linaro.org
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include "../vfio_platform_private.h"
-
-#define DRIVER_VERSION  "0.1"
-#define DRIVER_AUTHOR   "Eric Auger <eric.auger@linaro.org>"
-#define DRIVER_DESC     "Reset support for Calxeda xgmac vfio platform device"
-
-/* XGMAC Register definitions */
-#define XGMAC_CONTROL           0x00000000      /* MAC Configuration */
-
-/* DMA Control and Status Registers */
-#define XGMAC_DMA_CONTROL       0x00000f18      /* Ctrl (Operational Mode) */
-#define XGMAC_DMA_INTR_ENA      0x00000f1c      /* Interrupt Enable */
-
-/* DMA Control registe defines */
-#define DMA_CONTROL_ST          0x00002000      /* Start/Stop Transmission */
-#define DMA_CONTROL_SR          0x00000002      /* Start/Stop Receive */
-
-/* Common MAC defines */
-#define MAC_ENABLE_TX           0x00000008      /* Transmitter Enable */
-#define MAC_ENABLE_RX           0x00000004      /* Receiver Enable */
-
-static inline void xgmac_mac_disable(void __iomem *ioaddr)
-{
-	u32 value = readl(ioaddr + XGMAC_DMA_CONTROL);
-
-	value &= ~(DMA_CONTROL_ST | DMA_CONTROL_SR);
-	writel(value, ioaddr + XGMAC_DMA_CONTROL);
-
-	value = readl(ioaddr + XGMAC_CONTROL);
-	value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);
-	writel(value, ioaddr + XGMAC_CONTROL);
-}
-
-static int vfio_platform_calxedaxgmac_reset(struct vfio_platform_device *vdev)
-{
-	struct vfio_platform_region *reg = &vdev->regions[0];
-
-	if (!reg->ioaddr) {
-		reg->ioaddr =
-			ioremap(reg->addr, reg->size);
-		if (!reg->ioaddr)
-			return -ENOMEM;
-	}
-
-	/* disable IRQ */
-	writel(0, reg->ioaddr + XGMAC_DMA_INTR_ENA);
-
-	/* Disable the MAC core */
-	xgmac_mac_disable(reg->ioaddr);
-
-	return 0;
-}
-
-module_vfio_reset_handler("calxeda,hb-xgmac", vfio_platform_calxedaxgmac_reset);
-
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);