new file mode 100644
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gateworks System Controller multi-function device
+
+description: |
+ The GSC is a Multifunction I2C slave device with the following submodules:
+ - Watchdog Timer
+ - GPIO
+ - Pushbutton controller
+ - Hardware Monitore with ADC's for temperature and voltage rails and
+ fan controller
+
+maintainers:
+ - Tim Harvey <tharvey@gateworks.com>
+ - Robert Jones <rjones@gateworks.com>
+
+properties:
+ $nodename:
+ pattern: "gsc@[0-9a-f]{1,2}"
+ compatible:
+ const: gw,gsc
+
+ reg:
+ description:
+ I2C device address.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+ description:
+ The IRQ number.
+
+ hwmon:
+ description:
+ Optional Hardware Monitoring module.
+
+ properties:
+ compatible:
+ const: "gw,gsc-hwmon"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ gw,fan-base:
+ description:
+ The fan controller base address
+
+ patternProperties:
+ "^adc@[0-2]$":
+ type: object
+ description: |
+ Properties for a single ADC which can report cooked values
+ (ie temperature sensor based on thermister), raw values
+ (ie voltage rail with a pre-scaling resistor divider).
+
+ properties:
+ reg:
+ description:
+ Register of the ADC.
+ minimum: 0
+ maximum: 255
+
+ label: true
+ description:
+ Name of the ADC input.
+
+ type:
+ description: |
+ temperature in C*10 (temperature),
+ pre-scaled voltage value (voltage),
+ or scaled based on an optional resistor divider and optional
+ offset (voltage-raw)
+ enum:
+ - temperature
+ - voltage
+ - voltage-raw
+
+ gw,voltage-divider:
+ description: |
+ An array of two integers containing the resistor
+ values R1 and R2 of the optinal resistor divider on a raw ADC.
+
+ gw,voltage-offset:
+ description: |
+ A positive uV voltage offset to apply to a raw ADC
+ (ie to compensate for a diode drop).
+
+ required:
+ - compatible
+ - reg
+ - label
+ - type
+
+ required:
+ - compatible
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-parent
+ - #interrupt-cells
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ hwmon {
+ compatible = "gw,gsc-hwmon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gw,fan-base = <0x2c>;
+
+ adc@0 { /* A0: Board Temperature */
+ type = "temperature";
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ adc@2 { /* A1: Input Voltage (raw ADC) */
+ type = "voltage-raw";
+ reg = <0x02>;
+ label = "vdd_vin";
+ gw,voltage-divider = <22100 1000>;
+ gw,voltage-offset = <800000>;
+ };
+
+ adc@b { /* A2: Battery voltage */
+ type = "voltage";
+ reg = <0x0b>;
+ label = "vdd_bat";
+ };
+ };
+ };