diff mbox series

clk: rockchip: fix mmc get phase

Message ID 20200303192956.64410-1-jbrunet@baylibre.com (mailing list archive)
State Accepted, archived
Headers show
Series clk: rockchip: fix mmc get phase | expand

Commit Message

Jerome Brunet March 3, 2020, 7:29 p.m. UTC
If the mmc clock has no rate, it can be assumed to be constant.
In such case, there is no measurable phase shift. Just return 0
in this case instead of returning an error.

Fixes: 2760878662a2 ("clk: Bail out when calculating phase fails during clk
registration")
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/rockchip/clk-mmc-phase.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Stephen Boyd March 5, 2020, 9:54 p.m. UTC | #1
Quoting Jerome Brunet (2020-03-03 11:29:56)
> If the mmc clock has no rate, it can be assumed to be constant.
> In such case, there is no measurable phase shift. Just return 0
> in this case instead of returning an error.
> 
> Fixes: 2760878662a2 ("clk: Bail out when calculating phase fails during clk
> registration")
> Tested-by: Markus Reichl <m.reichl@fivetechno.de>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---

Applied to clk-next right on top of the phase branch.
diff mbox series

Patch

diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c
index 4abe7ff31f53..975454a3dd72 100644
--- a/drivers/clk/rockchip/clk-mmc-phase.c
+++ b/drivers/clk/rockchip/clk-mmc-phase.c
@@ -51,9 +51,9 @@  static int rockchip_mmc_get_phase(struct clk_hw *hw)
 	u16 degrees;
 	u32 delay_num = 0;
 
-	/* See the comment for rockchip_mmc_set_phase below */
+	/* Constant signal, no measurable phase shift */
 	if (!rate)
-		return -EINVAL;
+		return 0;
 
 	raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift);