| Message ID | 1580305919-30946-1-git-send-email-sanm@codeaurora.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add QUSB2 PHY support for SC7180 | expand |
On Wed 29 Jan 05:51 PST 2020, Sandeep Maheswaram wrote: Kishon, afaict this is all reviewed, let me know when you're taking the phy pieces and I'll pick up the dts changes. Regards, Bjorn > Converting dt binding to yaml. > Adding compatible for SC7180 in dt bindings. > Added generic QUSB2 V2 PHY support and using the same SC7180 and SDM845. > > Changes in v4: > *Addressed Rob Herrings comments in dt bindings. > *Added new structure for all the overriding tuning params. > *Removed the sc7180 and sdm845 compatible from driver and added qusb2 v2 phy. > *Added the qusb2 v2 phy compatible in device tree for sc7180 and sdm845. > > Changes in v3: > *Using the generic phy cfg table for QUSB2 V2 phy. > *Added support for overriding tuning parameters in QUSB2 V2 PHY > from device tree. > > Changes in v2: > Sorted the compatible in driver. > Converted dt binding to yaml. > Added compatible in yaml. > > Sandeep Maheswaram (8): > dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml > dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and > SC7180 > phy: qcom-qusb2: Add generic QUSB2 V2 PHY support > dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning > parameters > phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 > V2 PHY > arm64: dts: qcom: sc7180: Add generic QUSB2 V2 Phy compatible > arm64: dts: qcom: sdm845: Add generic QUSB2 V2 Phy compatible > arm64: dts: qcom: sc7180: Update QUSB2 V2 Phy params for SC7180 IDP > device > > .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 182 +++++++++++++++++++++ > .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 68 -------- > arch/arm64/boot/dts/qcom/sc7180-idp.dts | 6 +- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +- > drivers/phy/qualcomm/phy-qcom-qusb2.c | 143 +++++++++++----- > 6 files changed, 291 insertions(+), 114 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt > > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
On Mon, Feb 03, 2020 at 10:56:49AM -0800, Bjorn Andersson wrote: > On Wed 29 Jan 05:51 PST 2020, Sandeep Maheswaram wrote: > > Kishon, afaict this is all reviewed, let me know when you're taking the > phy pieces and I'll pick up the dts changes. The series has a few minor comments. Sandeep, could you respin the series so that it can be landed? Thanks Matthias > > Converting dt binding to yaml. > > Adding compatible for SC7180 in dt bindings. > > Added generic QUSB2 V2 PHY support and using the same SC7180 and SDM845. > > > > Changes in v4: > > *Addressed Rob Herrings comments in dt bindings. > > *Added new structure for all the overriding tuning params. > > *Removed the sc7180 and sdm845 compatible from driver and added qusb2 v2 phy. > > *Added the qusb2 v2 phy compatible in device tree for sc7180 and sdm845. > > > > Changes in v3: > > *Using the generic phy cfg table for QUSB2 V2 phy. > > *Added support for overriding tuning parameters in QUSB2 V2 PHY > > from device tree. > > > > Changes in v2: > > Sorted the compatible in driver. > > Converted dt binding to yaml. > > Added compatible in yaml. > > > > Sandeep Maheswaram (8): > > dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml > > dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and > > SC7180 > > phy: qcom-qusb2: Add generic QUSB2 V2 PHY support > > dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning > > parameters > > phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 > > V2 PHY > > arm64: dts: qcom: sc7180: Add generic QUSB2 V2 Phy compatible > > arm64: dts: qcom: sdm845: Add generic QUSB2 V2 Phy compatible > > arm64: dts: qcom: sc7180: Update QUSB2 V2 Phy params for SC7180 IDP > > device > > > > .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 182 +++++++++++++++++++++ > > .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 68 -------- > > arch/arm64/boot/dts/qcom/sc7180-idp.dts | 6 +- > > arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +- > > drivers/phy/qualcomm/phy-qcom-qusb2.c | 143 +++++++++++----- > > 6 files changed, 291 insertions(+), 114 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml > > delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt > > > > -- > > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > > of Code Aurora Forum, hosted by The Linux Foundation > >
Hi Matthias, Will do it by 3/9. Regards Sandeep On 3/6/2020 12:21 AM, Matthias Kaehlcke wrote: > On Mon, Feb 03, 2020 at 10:56:49AM -0800, Bjorn Andersson wrote: >> On Wed 29 Jan 05:51 PST 2020, Sandeep Maheswaram wrote: >> >> Kishon, afaict this is all reviewed, let me know when you're taking the >> phy pieces and I'll pick up the dts changes. > The series has a few minor comments. Sandeep, could you respin the > series so that it can be landed? > > Thanks > > Matthias > >>> Converting dt binding to yaml. >>> Adding compatible for SC7180 in dt bindings. >>> Added generic QUSB2 V2 PHY support and using the same SC7180 and SDM845. >>> >>> Changes in v4: >>> *Addressed Rob Herrings comments in dt bindings. >>> *Added new structure for all the overriding tuning params. >>> *Removed the sc7180 and sdm845 compatible from driver and added qusb2 v2 phy. >>> *Added the qusb2 v2 phy compatible in device tree for sc7180 and sdm845. >>> >>> Changes in v3: >>> *Using the generic phy cfg table for QUSB2 V2 phy. >>> *Added support for overriding tuning parameters in QUSB2 V2 PHY >>> from device tree. >>> >>> Changes in v2: >>> Sorted the compatible in driver. >>> Converted dt binding to yaml. >>> Added compatible in yaml. >>> >>> Sandeep Maheswaram (8): >>> dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml >>> dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and >>> SC7180 >>> phy: qcom-qusb2: Add generic QUSB2 V2 PHY support >>> dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning >>> parameters >>> phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 >>> V2 PHY >>> arm64: dts: qcom: sc7180: Add generic QUSB2 V2 Phy compatible >>> arm64: dts: qcom: sdm845: Add generic QUSB2 V2 Phy compatible >>> arm64: dts: qcom: sc7180: Update QUSB2 V2 Phy params for SC7180 IDP >>> device >>> >>> .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 182 +++++++++++++++++++++ >>> .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 68 -------- >>> arch/arm64/boot/dts/qcom/sc7180-idp.dts | 6 +- >>> arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- >>> arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +- >>> drivers/phy/qualcomm/phy-qcom-qusb2.c | 143 +++++++++++----- >>> 6 files changed, 291 insertions(+), 114 deletions(-) >>> create mode 100644 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml >>> delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt >>> >>> -- >>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member >>> of Code Aurora Forum, hosted by The Linux Foundation >>>
Converting dt binding to yaml. Adding compatible for SC7180 in dt bindings. Added generic QUSB2 V2 PHY support and using the same SC7180 and SDM845. Changes in v4: *Addressed Rob Herrings comments in dt bindings. *Added new structure for all the overriding tuning params. *Removed the sc7180 and sdm845 compatible from driver and added qusb2 v2 phy. *Added the qusb2 v2 phy compatible in device tree for sc7180 and sdm845. Changes in v3: *Using the generic phy cfg table for QUSB2 V2 phy. *Added support for overriding tuning parameters in QUSB2 V2 PHY from device tree. Changes in v2: Sorted the compatible in driver. Converted dt binding to yaml. Added compatible in yaml. Sandeep Maheswaram (8): dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180 phy: qcom-qusb2: Add generic QUSB2 V2 PHY support dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY arm64: dts: qcom: sc7180: Add generic QUSB2 V2 Phy compatible arm64: dts: qcom: sdm845: Add generic QUSB2 V2 Phy compatible arm64: dts: qcom: sc7180: Update QUSB2 V2 Phy params for SC7180 IDP device .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 182 +++++++++++++++++++++ .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 68 -------- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 6 +- arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +- drivers/phy/qualcomm/phy-qcom-qusb2.c | 143 +++++++++++----- 6 files changed, 291 insertions(+), 114 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt