[1/2] clk: qcom: smd: Add support for MSM8976 rpm clocks

Commit Message

AngeloGioacchino Del Regno Oct. 31, 2019, 11:29 a.m. UTC

From: AngeloGioacchino Del Regno <[e-mail]>

Add rpm smd clocks, PMIC and bus clocks which are required on MSM8976,
MSM8956 (and APQ variants) for clients to vote on.

Signed-off-by: AngeloGioacchino Del Regno <[e-mail]>
---
 drivers/clk/qcom/clk-smd-rpm.c | 50 ++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

Comments

Stephen Boyd March 9, 2020, 10:13 p.m. UTC | #1

Quoting [e-mail] (2019-10-31 04:29:50)
> From: AngeloGioacchino Del Regno <[e-mail]>
> 
> Add rpm smd clocks, PMIC and bus clocks which are required on MSM8976,
> MSM8956 (and APQ variants) for clients to vote on.
> 
> Signed-off-by: AngeloGioacchino Del Regno <[e-mail]>
> ---

Applied to clk-next

Patch

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index fef5e8157061..d8ae38daff63 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -523,6 +523,55 @@  static const struct rpm_smd_clk_desc rpm_clk_msm8974 = {
 	.num_clks = ARRAY_SIZE(msm8974_clks),
 };
 
+
+/* msm8976 */
+DEFINE_CLK_SMD_RPM(msm8976, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8976, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8976, mmssnoc_ahb_clk, mmssnoc_ahb_a_clk,
+		   QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM(msm8976, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8976, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
+DEFINE_CLK_SMD_RPM_QDSS(msm8976, qdss_clk, qdss_a_clk,
+			QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, bb_clk2, bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, rf_clk2, rf_clk2_a, 5);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, div_clk2, div_clk2_a, 12);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8976, bb_clk1_pin, bb_clk1_a_pin, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8976, bb_clk2_pin, bb_clk2_a_pin, 2);
+
+static struct clk_smd_rpm *msm8976_clks[] = {
+	[RPM_SMD_PCNOC_CLK] = &msm8976_pcnoc_clk,
+	[RPM_SMD_PCNOC_A_CLK] = &msm8976_pcnoc_a_clk,
+	[RPM_SMD_SNOC_CLK] = &msm8976_snoc_clk,
+	[RPM_SMD_SNOC_A_CLK] = &msm8976_snoc_a_clk,
+	[RPM_SMD_BIMC_CLK] = &msm8976_bimc_clk,
+	[RPM_SMD_BIMC_A_CLK] = &msm8976_bimc_a_clk,
+	[RPM_SMD_QDSS_CLK] = &msm8976_qdss_clk,
+	[RPM_SMD_QDSS_A_CLK] = &msm8976_qdss_a_clk,
+	[RPM_SMD_BB_CLK1] = &msm8976_bb_clk1,
+	[RPM_SMD_BB_CLK1_A] = &msm8976_bb_clk1_a,
+	[RPM_SMD_BB_CLK2] = &msm8976_bb_clk2,
+	[RPM_SMD_BB_CLK2_A] = &msm8976_bb_clk2_a,
+	[RPM_SMD_RF_CLK2] = &msm8976_rf_clk2,
+	[RPM_SMD_RF_CLK2_A] = &msm8976_rf_clk2_a,
+	[RPM_SMD_BB_CLK1_PIN] = &msm8976_bb_clk1_pin,
+	[RPM_SMD_BB_CLK1_A_PIN] = &msm8976_bb_clk1_a_pin,
+	[RPM_SMD_BB_CLK2_PIN] = &msm8976_bb_clk2_pin,
+	[RPM_SMD_BB_CLK2_A_PIN] = &msm8976_bb_clk2_a_pin,
+	[RPM_SMD_MMSSNOC_AHB_CLK] = &msm8976_mmssnoc_ahb_clk,
+	[RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8976_mmssnoc_ahb_a_clk,
+	[RPM_SMD_DIV_CLK2] = &msm8976_div_clk2,
+	[RPM_SMD_DIV_A_CLK2] = &msm8976_div_clk2_a,
+	[RPM_SMD_IPA_CLK] = &msm8976_ipa_clk,
+	[RPM_SMD_IPA_A_CLK] = &msm8976_ipa_a_clk,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_msm8976 = {
+	.clks = msm8976_clks,
+	.num_clks = ARRAY_SIZE(msm8976_clks),
+};
+
 /* msm8996 */
 DEFINE_CLK_SMD_RPM(msm8996, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
 DEFINE_CLK_SMD_RPM(msm8996, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
@@ -712,6 +761,7 @@  static const struct rpm_smd_clk_desc rpm_clk_msm8998 = {
 static const struct of_device_id rpm_smd_clk_match_table[] = {
 	{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
 	{ .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
+	{ .compatible = "qcom,rpmcc-msm8976", .data = &rpm_clk_msm8976 },
 	{ .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
 	{ .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 },
 	{ .compatible = "qcom,rpmcc-qcs404",  .data = &rpm_clk_qcs404  },