@@ -3885,6 +3885,12 @@ F: arch/powerpc/include/uapi/asm/spu*.h
F: arch/powerpc/oprofile/*cell*
F: arch/powerpc/platforms/cell/
+CELLWISE CW2015 BATTERY DRIVER
+M: Tobias Schrammm <t.schramm@manjaro.org>
+S: Maintained
+F: Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+F: drivers/power/supply/cw2015_battery.c
+
CEPH COMMON CODE (LIBCEPH)
M: Ilya Dryomov <idryomov@gmail.com>
M: Jeff Layton <jlayton@kernel.org>
@@ -116,6 +116,14 @@ config BATTERY_CPCAP
Say Y here to enable support for battery on Motorola
phones and tablets such as droid 4.
+config BATTERY_CW2015
+ tristate "CW2015 Battery driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y here to enable support for the cellwise cw2015
+ battery fuel gauge (used in the Pinebook Pro & others)
+
config BATTERY_DS2760
tristate "DS2760 battery driver (HP iPAQ & others)"
depends on W1
@@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o
obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
obj-$(CONFIG_BATTERY_CPCAP) += cpcap-battery.o
+obj-$(CONFIG_BATTERY_CW2015) += cw2015_battery.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
new file mode 100644
@@ -0,0 +1,759 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fuel gauge driver for CellWise 2013 / 2015
+ *
+ * Copyright (C) 2012, RockChip
+ * Copyright (C) 2020, Tobias Schramm
+ *
+ * Authors: xuhuicong <xhc@rock-chips.com>
+ * Authors: Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/timekeeping.h>
+#include <linux/workqueue.h>
+
+#define CW2015_SIZE_BATINFO 64
+
+#define CW2015_RESET_TRIES 5
+
+#define CW2015_REG_VERSION 0x00
+#define CW2015_REG_VCELL 0x02
+#define CW2015_REG_SOC 0x04
+#define CW2015_REG_RRT_ALERT 0x06
+#define CW2015_REG_CONFIG 0x08
+#define CW2015_REG_MODE 0x0A
+#define CW2015_REG_BATINFO 0x10
+
+#define CW2015_MODE_SLEEP_MASK GENMASK(7, 6)
+#define CW2015_MODE_SLEEP (0x03 << 6)
+#define CW2015_MODE_NORMAL (0x00 << 6)
+#define CW2015_MODE_QUICK_START (0x03 << 4)
+#define CW2015_MODE_RESTART (0x0f << 0)
+
+#define CW2015_CONFIG_UPDATE_FLG (0x01 << 1)
+#define CW2015_ATHD(x) ((x) << 3)
+#define CW2015_MASK_ATHD GENMASK(7, 3)
+#define CW2015_MASK_SOC GENMASK(12, 0)
+
+/* reset gauge of no valid state of charge could be polled for 40s */
+#define CW2015_BAT_SOC_ERROR_MS (40 * MSEC_PER_SEC)
+/* reset gauge if state of charge stuck for half an hour during charging */
+#define CW2015_BAT_CHARGING_STUCK_MS (1800 * MSEC_PER_SEC)
+
+/* poll interval from CellWise GPL Android driver example */
+#define CW2015_DEFAULT_POLL_INTERVAL_MS 8000
+
+#define CW2015_AVERAGING_SAMPLES 3
+
+struct cw_battery {
+ struct device *dev;
+ struct workqueue_struct *battery_workqueue;
+ struct delayed_work battery_delay_work;
+ struct regmap *regmap;
+ struct power_supply *rk_bat;
+ struct power_supply_battery_info battery;
+ u8 *bat_profile;
+
+ bool charger_attached;
+ bool battery_changed;
+
+ int soc;
+ int voltage_mv;
+ int status;
+ int time_to_empty;
+ int charge_count;
+
+ u32 poll_interval_ms;
+ u8 alert_level;
+
+ unsigned int read_errors;
+ unsigned int charge_stuck_cnt;
+};
+
+static int cw_read_word(struct cw_battery *cw_bat, u8 reg, u16 *val)
+{
+ __be16 value;
+ int ret;
+
+ ret = regmap_bulk_read(cw_bat->regmap, reg, &value, sizeof(value));
+ if (ret)
+ return ret;
+
+ *val = be16_to_cpu(value);
+ return 0;
+}
+
+int cw_update_profile(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned int reg_val;
+ u8 reset_val;
+
+ /* make sure gauge is not in sleep mode */
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, ®_val);
+ if (ret)
+ return ret;
+
+ reset_val = reg_val;
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ dev_err(cw_bat->dev,
+ "Device is in sleep mode, can't update battery info");
+ return -EINVAL;
+ }
+
+ /* write new battery info */
+ ret = regmap_raw_write(cw_bat->regmap, CW2015_REG_BATINFO,
+ cw_bat->bat_profile,
+ CW2015_SIZE_BATINFO);
+ if (ret)
+ return ret;
+
+ /* set config update flag */
+ reg_val |= CW2015_CONFIG_UPDATE_FLG;
+ reg_val &= ~CW2015_MASK_ATHD;
+ reg_val |= CW2015_ATHD(cw_bat->alert_level);
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
+ if (ret)
+ return ret;
+
+ /* reset gauge to apply new battery profile */
+ reset_val &= ~CW2015_MODE_RESTART;
+ reg_val = reset_val | CW2015_MODE_RESTART;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
+ if (ret)
+ return ret;
+
+ /* wait for gauge to reset */
+ msleep(20);
+
+ /* clear reset flag */
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+ if (ret)
+ return ret;
+
+ /* wait for gauge to become ready */
+ ret = regmap_read_poll_timeout(cw_bat->regmap, CW2015_REG_SOC,
+ reg_val, reg_val <= 100,
+ 10 * USEC_PER_MSEC, 10 * USEC_PER_SEC);
+ if(ret)
+ dev_err(cw_bat->dev,
+ "Gauge did not become ready after profile upload");
+ else
+ dev_dbg(cw_bat->dev, "Battery profile updated");
+
+ return ret;
+}
+
+static int cw_init(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned int reg_val = CW2015_MODE_SLEEP;
+
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ reg_val = CW2015_MODE_NORMAL;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, ®_val);
+ if (ret)
+ return ret;
+
+ if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) {
+ dev_dbg(cw_bat->dev, "Setting new alert level");
+ reg_val &= ~CW2015_MASK_ATHD;
+ reg_val |= ~CW2015_ATHD(cw_bat->alert_level);
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, ®_val);
+ if (ret)
+ return ret;
+
+ if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) {
+ dev_dbg(cw_bat->dev,
+ "Battery profile not present, uploading battery profile");
+ if (cw_bat->bat_profile) {
+ ret = cw_update_profile(cw_bat);
+ if (ret) {
+ dev_err(cw_bat->dev,
+ "Failed to upload battery info\n");
+ return ret;
+ }
+ } else {
+ dev_warn(cw_bat->dev,
+ "Have no battery profile for uploading, continuing without profile");
+ }
+ } else if (cw_bat->bat_profile) {
+ u8 bat_info[CW2015_SIZE_BATINFO];
+
+ ret = regmap_raw_read(cw_bat->regmap, CW2015_REG_BATINFO,
+ bat_info, CW2015_SIZE_BATINFO);
+ if (ret) {
+ dev_err(cw_bat->dev,
+ "Failed to read stored battery profile\n");
+ return ret;
+ }
+
+ if (memcmp(bat_info, cw_bat->bat_profile, CW2015_SIZE_BATINFO)) {
+ dev_warn(cw_bat->dev, "Replacing stored battery profile");
+ ret = cw_update_profile(cw_bat);
+ if (ret)
+ return ret;
+ }
+ } else {
+ dev_warn(cw_bat->dev,
+ "Can't check current battery profile, no profile provided");
+ }
+
+ dev_dbg(cw_bat->dev, "Battery profile configured");
+ return 0;
+}
+
+static int cw_power_on_reset(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned char reset_val;
+
+ reset_val = CW2015_MODE_SLEEP;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+ if (ret)
+ return ret;
+
+ /* wait for gauge to enter sleep */
+ msleep(20);
+
+ reset_val = CW2015_MODE_NORMAL;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+ if (ret)
+ return ret;
+
+ ret = cw_init(cw_bat);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+#define HYSTERESIS(current, previous, up, down) \
+ (((current) < (previous) + (up)) && ((current) > (previous) - (down)))
+
+static int cw_get_soc(struct cw_battery *cw_bat)
+{
+ unsigned int soc;
+ int ret;
+
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_SOC, &soc);
+ if (ret)
+ return ret;
+
+ if (soc > 100) {
+ int max_error_cycles =
+ CW2015_BAT_SOC_ERROR_MS / cw_bat->poll_interval_ms;
+
+ dev_err(cw_bat->dev, "Invalid SoC %d%%", soc);
+ cw_bat->read_errors++;
+ if (cw_bat->read_errors > max_error_cycles) {
+ dev_warn(cw_bat->dev,
+ "Too many invalid SoC reports, resetting gauge");
+ cw_power_on_reset(cw_bat);
+ cw_bat->read_errors = 0;
+ }
+ return cw_bat->soc;
+ }
+ cw_bat->read_errors = 0;
+
+ /* Reset gauge if stuck while charging */
+ if (cw_bat->status == POWER_SUPPLY_STATUS_CHARGING && soc == cw_bat->soc) {
+ int max_stuck_cycles =
+ CW2015_BAT_CHARGING_STUCK_MS / cw_bat->poll_interval_ms;
+
+ cw_bat->charge_stuck_cnt++;
+ if (cw_bat->charge_stuck_cnt > max_stuck_cycles) {
+ dev_warn(cw_bat->dev,
+ "SoC stuck @%u%%, resetting gauge", soc);
+ cw_power_on_reset(cw_bat);
+ cw_bat->charge_stuck_cnt = 0;
+ }
+ } else {
+ cw_bat->charge_stuck_cnt = 0;
+ }
+
+ /* Ignore voltage dips during charge */
+ if (cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 0, 3))
+ soc = cw_bat->soc;
+
+ /* Ignore voltage spikes during discharge */
+ if (!cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 3, 0))
+ soc = cw_bat->soc;
+
+ return soc;
+}
+
+static int cw_get_voltage(struct cw_battery *cw_bat)
+{
+ int ret, i, voltage_mv;
+ u16 reg_val;
+ u32 avg = 0;
+
+ for (i = 0; i < CW2015_AVERAGING_SAMPLES; i++) {
+ ret = cw_read_word(cw_bat, CW2015_REG_VCELL, ®_val);
+ if (ret)
+ return ret;
+
+ avg += reg_val;
+ }
+ avg /= CW2015_AVERAGING_SAMPLES;
+
+ /*
+ * 305 uV per ADC step
+ * Use 312 / 1024 as efficient approximation of 305 / 1000
+ * Negligible error of 0.1%
+ */
+ voltage_mv = avg * 312 / 1024;
+
+ dev_dbg(cw_bat->dev, "Read voltage: %d mV, raw=0x%04x\n",
+ voltage_mv, reg_val);
+ return voltage_mv;
+}
+
+static int cw_get_time_to_empty(struct cw_battery *cw_bat)
+{
+ int ret;
+ u16 value16;
+
+ ret = cw_read_word(cw_bat, CW2015_REG_RRT_ALERT, &value16);
+ if (ret)
+ return ret;
+
+ return value16 & CW2015_MASK_SOC;
+}
+
+static void cw_update_charge_status(struct cw_battery *cw_bat)
+{
+ int ret;
+
+ ret = power_supply_am_i_supplied(cw_bat->rk_bat);
+ if (ret < 0) {
+ dev_warn(cw_bat->dev, "Failed to get supply state: %d", ret);
+ } else {
+ bool charger_attached;
+
+ charger_attached = !!ret;
+ if (cw_bat->charger_attached != charger_attached) {
+ cw_bat->battery_changed = true;
+ if (charger_attached)
+ cw_bat->charge_count++;
+ }
+ cw_bat->charger_attached = charger_attached;
+ }
+}
+
+static void cw_update_soc(struct cw_battery *cw_bat)
+{
+ int soc;
+
+ soc = cw_get_soc(cw_bat);
+ if (soc < 0)
+ dev_err(cw_bat->dev, "Failed to get SoC from gauge: %d", soc);
+ else if (cw_bat->soc != soc) {
+ cw_bat->soc = soc;
+ cw_bat->battery_changed = true;
+ }
+}
+
+static void cw_update_voltage(struct cw_battery *cw_bat)
+{
+ int voltage_mv;
+
+ voltage_mv = cw_get_voltage(cw_bat);
+ if (voltage_mv < 0)
+ dev_err(cw_bat->dev, "Failed to get voltage from gauge: %d",
+ voltage_mv);
+ else
+ cw_bat->voltage_mv = voltage_mv;
+}
+
+static void cw_update_status(struct cw_battery *cw_bat)
+{
+ int status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ if (cw_bat->charger_attached) {
+ if (cw_bat->soc >= 100)
+ status = POWER_SUPPLY_STATUS_FULL;
+ else
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+
+ if (cw_bat->status != status)
+ cw_bat->battery_changed = true;
+ cw_bat->status = status;
+}
+
+static void cw_update_time_to_empty(struct cw_battery *cw_bat)
+{
+ int time_to_empty;
+
+ time_to_empty = cw_get_time_to_empty(cw_bat);
+ if (time_to_empty < 0)
+ dev_err(cw_bat->dev, "Failed to get time to empty from gauge: %d",
+ time_to_empty);
+ else if (cw_bat->time_to_empty != time_to_empty) {
+ cw_bat->time_to_empty = time_to_empty;
+ cw_bat->battery_changed = true;
+ }
+}
+
+static void cw_bat_work(struct work_struct *work)
+{
+ struct delayed_work *delay_work;
+ struct cw_battery *cw_bat;
+ int ret;
+ unsigned int reg_val;
+ int i = 0;
+
+ delay_work = to_delayed_work(work);
+ cw_bat = container_of(delay_work, struct cw_battery, battery_delay_work);
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, ®_val);
+ if (ret) {
+ dev_err(cw_bat->dev, "Failed to read mode from gauge: %d", ret);
+ } else {
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ for (i = 0; i < CW2015_RESET_TRIES; i++) {
+ if (!cw_power_on_reset(cw_bat))
+ break;
+ }
+ }
+ cw_update_soc(cw_bat);
+ cw_update_voltage(cw_bat);
+ cw_update_charge_status(cw_bat);
+ cw_update_status(cw_bat);
+ cw_update_time_to_empty(cw_bat);
+ }
+ dev_dbg(cw_bat->dev, "charger_attached = %d", cw_bat->charger_attached);
+ dev_dbg(cw_bat->dev, "status = %d", cw_bat->status);
+ dev_dbg(cw_bat->dev, "soc = %d%%", cw_bat->soc);
+ dev_dbg(cw_bat->dev, "voltage = %dmV", cw_bat->voltage_mv);
+
+ if (cw_bat->battery_changed)
+ power_supply_changed(cw_bat->rk_bat);
+ cw_bat->battery_changed = false;
+
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work,
+ msecs_to_jiffies(cw_bat->poll_interval_ms));
+}
+
+static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat)
+{
+ return cw_bat->time_to_empty > 0 &&
+ cw_bat->time_to_empty < CW2015_MASK_SOC &&
+ cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int cw_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct cw_battery *cw_bat;
+
+ cw_bat = power_supply_get_drvdata(psy);
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = cw_bat->soc;
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = cw_bat->status;
+ break;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!cw_bat->voltage_mv;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = cw_bat->voltage_mv * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat))
+ val->intval = cw_bat->time_to_empty;
+ else
+ val->intval = 0;
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = cw_bat->charge_count;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ if (cw_bat->battery.charge_full_design_uah > 0)
+ val->intval = cw_bat->battery.charge_full_design_uah;
+ else
+ val->intval = 0;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat) &&
+ cw_bat->battery.charge_full_design_uah > 0) {
+ /* calculate remaining capacity */
+ val->intval = cw_bat->battery.charge_full_design_uah;
+ val->intval = val->intval * cw_bat->soc / 100;
+
+ /* estimate current based on time to empty */
+ val->intval = 60 * val->intval / cw_bat->time_to_empty;
+ } else {
+ val->intval = 0;
+ }
+
+ break;
+
+ default:
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property cw_battery_properties[] = {
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static const struct power_supply_desc cw2015_bat_desc = {
+ .name = "cw2015-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = cw_battery_properties,
+ .num_properties = ARRAY_SIZE(cw_battery_properties),
+ .get_property = cw_battery_get_property,
+};
+
+static int cw2015_parse_properties(struct cw_battery *cw_bat)
+{
+ struct device *dev = cw_bat->dev;
+ int length;
+ u32 value;
+ int ret;
+
+ length = device_property_count_u8(dev, "cellwise,battery-profile");
+ if (length) {
+ if (length != CW2015_SIZE_BATINFO) {
+ dev_err(cw_bat->dev, "battery-profile must be %d bytes",
+ CW2015_SIZE_BATINFO);
+ return -EINVAL;
+ }
+
+ cw_bat->bat_profile = devm_kzalloc(dev, length, GFP_KERNEL);
+ if (!cw_bat->bat_profile) {
+ dev_err(cw_bat->dev,
+ "Failed to allocate memory for battery config info");
+ return -ENOMEM;
+ }
+
+ ret = device_property_read_u8_array(dev,
+ "cellwise,battery-profile",
+ cw_bat->bat_profile,
+ length);
+ if (ret)
+ return ret;
+ } else {
+ dev_warn(cw_bat->dev,
+ "No battery-profile found, rolling with current flash contents");
+ }
+
+ cw_bat->poll_interval_ms = CW2015_DEFAULT_POLL_INTERVAL_MS;
+ ret = device_property_read_u32(dev, "cellwise,monitor-interval-ms", &value);
+ if (ret >= 0) {
+ dev_dbg(cw_bat->dev, "Overriding default monitor-interval with %u ms",
+ value);
+ cw_bat->poll_interval_ms = value;
+ }
+
+ return 0;
+}
+
+static const struct regmap_range regmap_ranges_rd_yes[] = {
+ regmap_reg_range(CW2015_REG_VERSION, CW2015_REG_VERSION),
+ regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_CONFIG),
+ regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+ regmap_reg_range(CW2015_REG_BATINFO,
+ CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_rd_table = {
+ .yes_ranges = regmap_ranges_rd_yes,
+ .n_yes_ranges = 4,
+};
+
+static const struct regmap_range regmap_ranges_wr_yes[] = {
+ regmap_reg_range(CW2015_REG_RRT_ALERT, CW2015_REG_CONFIG),
+ regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+ regmap_reg_range(CW2015_REG_BATINFO,
+ CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_wr_table = {
+ .yes_ranges = regmap_ranges_wr_yes,
+ .n_yes_ranges = 3,
+};
+
+static const struct regmap_range regmap_ranges_vol_yes[] = {
+ regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_SOC + 1),
+};
+
+static const struct regmap_access_table regmap_vol_table = {
+ .yes_ranges = regmap_ranges_vol_yes,
+ .n_yes_ranges = 1,
+};
+
+static const struct regmap_config cw2015_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = ®map_rd_table,
+ .wr_table = ®map_wr_table,
+ .volatile_table = ®map_vol_table,
+ .max_register = CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1,
+};
+
+static int cw_bat_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct cw_battery *cw_bat;
+ struct power_supply_config psy_cfg = { };
+
+ cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL);
+ if (!cw_bat)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, cw_bat);
+ cw_bat->dev = &client->dev;
+ cw_bat->soc = 1;
+
+ ret = cw2015_parse_properties(cw_bat);
+ if (ret) {
+ dev_err(cw_bat->dev, "Failed to parse cw2015 properties");
+ return ret;
+ }
+
+ cw_bat->regmap = devm_regmap_init_i2c(client, &cw2015_regmap_config);
+ if (IS_ERR(cw_bat->regmap)) {
+ dev_err(cw_bat->dev, "Failed to allocate regmap: %ld",
+ PTR_ERR(cw_bat->regmap));
+ return PTR_ERR(cw_bat->regmap);
+ }
+
+ ret = cw_init(cw_bat);
+ if (ret) {
+ dev_err(cw_bat->dev, "Init failed: %d", ret);
+ return ret;
+ }
+
+ psy_cfg.drv_data = cw_bat;
+ psy_cfg.fwnode = dev_fwnode(cw_bat->dev);
+
+ cw_bat->rk_bat = devm_power_supply_register(&client->dev,
+ &cw2015_bat_desc, &psy_cfg);
+ if (IS_ERR(cw_bat->rk_bat)) {
+ dev_err(cw_bat->dev, "Failed to register power supply");
+ return PTR_ERR(cw_bat->rk_bat);
+ }
+
+ ret = power_supply_get_battery_info(cw_bat->rk_bat, &cw_bat->battery);
+ if (ret) {
+ dev_warn(cw_bat->dev,
+ "No monitored battery, some properties will be missing");
+ }
+
+ cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery");
+ INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work);
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, msecs_to_jiffies(10));
+ return 0;
+}
+
+static int __maybe_unused cw_bat_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&cw_bat->battery_delay_work);
+ return 0;
+}
+
+static int __maybe_unused cw_bat_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, 0);
+ return 0;
+}
+
+SIMPLE_DEV_PM_OPS(cw_bat_pm_ops, cw_bat_suspend, cw_bat_resume);
+
+static int cw_bat_remove(struct i2c_client *client)
+{
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&cw_bat->battery_delay_work);
+ power_supply_put_battery_info(cw_bat->rk_bat, &cw_bat->battery);
+ return 0;
+}
+
+static const struct i2c_device_id cw_bat_id_table[] = {
+ { "cw2015", 0 },
+ { }
+};
+
+static const struct of_device_id cw2015_of_match[] = {
+ { .compatible = "cellwise,cw2015" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cw2015_of_match);
+
+static struct i2c_driver cw_bat_driver = {
+ .driver = {
+ .name = "cw2015",
+ .pm = &cw_bat_pm_ops,
+ },
+ .probe = cw_bat_probe,
+ .remove = cw_bat_remove,
+ .id_table = cw_bat_id_table,
+};
+
+module_i2c_driver(cw_bat_driver);
+
+MODULE_AUTHOR("xhc<xhc@rock-chips.com>");
+MODULE_AUTHOR("Tobias Schramm <t.schramm@manjaro.org>");
+MODULE_DESCRIPTION("cw2015/cw2013 battery driver");
+MODULE_LICENSE("GPL");
This patch adds a driver for the CellWise cw2015 fuel gauge. The CellWise cw2015 is a shuntless, single-cell Li-Ion fuel gauge used in the pine64 Pinebook Pro laptop and some Raspberry Pi UPS HATs. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- MAINTAINERS | 6 + drivers/power/supply/Kconfig | 8 + drivers/power/supply/Makefile | 1 + drivers/power/supply/cw2015_battery.c | 759 ++++++++++++++++++++++++++ 4 files changed, 774 insertions(+) create mode 100644 drivers/power/supply/cw2015_battery.c