diff mbox series

[1/2] arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator

Message ID 20200312172240.21362-1-jbx6244@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator | expand

Commit Message

Johan Jonker March 12, 2020, 5:22 p.m. UTC
An expermental test with the command below gives this error:

arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dt.yaml:
spdif@ff870000:
'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns', 'power-domains'
do not match any of the regexes: 'pinctrl-[0-9]+'

'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns'
are not valid properties for 'spdif' nodes, so remove them.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts | 2 --
 1 file changed, 2 deletions(-)

Comments

Heiko Stuebner March 17, 2020, 12:52 a.m. UTC | #1
Am Donnerstag, 12. März 2020, 18:22:39 CET schrieb Johan Jonker:
> An expermental test with the command below gives this error:
> 
> arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dt.yaml:
> spdif@ff870000:
> 'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns', 'power-domains'
> do not match any of the regexes: 'pinctrl-[0-9]+'
> 
> 'i2c-scl-falling-time-ns', 'i2c-scl-rising-time-ns'
> are not valid properties for 'spdif' nodes, so remove them.
> 
> make ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>

applied for 5.7

Thanks
Heiko
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index b4d8f60b7..73e269a8a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -230,7 +230,5 @@ 
 };
 
 &spdif {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
 	status = "okay";
 };