diff mbox series

[v1,6/6] m arch/arm/boot/dts/imx6q-prti6q.dts

Message ID 20200318120354.4989-6-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series [v1,1/6] dt-bindings: vendor-prefixes: Add an entry for Protonic Holland | expand

Commit Message

Oleksij Rempel March 18, 2020, 12:03 p.m. UTC
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6q-prti6q.dts | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

Comments

Oleksij Rempel March 18, 2020, 12:27 p.m. UTC | #1
oops,
forgot to squash this one. Will be done in v2

On Wed, Mar 18, 2020 at 01:03:54PM +0100, Oleksij Rempel wrote:
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  arch/arm/boot/dts/imx6q-prti6q.dts | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
> index a6fd4eb2e78b..8880d56c59ac 100644
> --- a/arch/arm/boot/dts/imx6q-prti6q.dts
> +++ b/arch/arm/boot/dts/imx6q-prti6q.dts
> @@ -229,8 +229,23 @@ &sata {
>  &fec {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_enet>;
> -	phy-mode = "rgmii";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&rgmii_phy>;
>  	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* Microchip KSZ9031RNX PHY */
> +		rgmii_phy: ethernet-phy@0 {
> +			reg = <0>;
> +			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
> +			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> +			reset-assert-us = <10000>;
> +			reset-deassert-us = <300>;
> +		};
> +	};
>  };
>  
>  &ldb {
> -- 
> 2.25.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
index a6fd4eb2e78b..8880d56c59ac 100644
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -229,8 +229,23 @@  &sata {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
 };
 
 &ldb {