diff mbox series

[net-next] net: phy: mdio-mux-bcm-iproc: use readl_poll_timeout() to simplify code

Message ID 20200324112647.27237-1-zhengdejin5@gmail.com (mailing list archive)
State Mainlined
Commit c9c1fd62b0ed32127d6af8409ae3ad0e9be70590
Headers show
Series [net-next] net: phy: mdio-mux-bcm-iproc: use readl_poll_timeout() to simplify code | expand

Commit Message

Dejin Zheng March 24, 2020, 11:26 a.m. UTC
use readl_poll_timeout() to replace the poll codes for simplify
iproc_mdio_wait_for_idle() function

Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
---
 drivers/net/phy/mdio-mux-bcm-iproc.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

Comments

Andrew Lunn March 24, 2020, 12:47 p.m. UTC | #1
On Tue, Mar 24, 2020 at 07:26:47PM +0800, Dejin Zheng wrote:
> use readl_poll_timeout() to replace the poll codes for simplify
> iproc_mdio_wait_for_idle() function
> 
> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
David Miller March 24, 2020, 11:21 p.m. UTC | #2
From: Dejin Zheng <zhengdejin5@gmail.com>
Date: Tue, 24 Mar 2020 19:26:47 +0800

> use readl_poll_timeout() to replace the poll codes for simplify
> iproc_mdio_wait_for_idle() function
> 
> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index aad6809ebe39..42fb5f166136 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -10,6 +10,7 @@ 
 #include <linux/phy.h>
 #include <linux/mdio-mux.h>
 #include <linux/delay.h>
+#include <linux/iopoll.h>
 
 #define MDIO_RATE_ADJ_EXT_OFFSET	0x000
 #define MDIO_RATE_ADJ_INT_OFFSET	0x004
@@ -78,18 +79,11 @@  static void mdio_mux_iproc_config(struct iproc_mdiomux_desc *md)
 
 static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
 {
-	unsigned int timeout = 1000; /* loop for 1s */
 	u32 val;
 
-	do {
-		val = readl(base + MDIO_STAT_OFFSET);
-		if ((val & MDIO_STAT_DONE) == result)
-			return 0;
-
-		usleep_range(1000, 2000);
-	} while (timeout--);
-
-	return -ETIMEDOUT;
+	return readl_poll_timeout(base + MDIO_STAT_OFFSET, val,
+				  (val & MDIO_STAT_DONE) == result,
+				  2000, 1000000);
 }
 
 /* start_miim_ops- Program and start MDIO transaction over mdio bus.