| Message ID | 5cfeed6df208b74913312a1c97235ee615180f91.1582361737.git.mchehab+huawei@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On Sat, Feb 22, 2020 at 10:00:03AM +0100, Mauro Carvalho Chehab wrote: > Several references got broken due to txt to ReST conversion. > > Several of them can be automatically fixed with: > > scripts/documentation-file-ref-check --fix > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> > --- > Documentation/admin-guide/kernel-parameters.txt | 10 +++++----- > Documentation/filesystems/cifs/cifsroot.txt | 2 +- > Documentation/memory-barriers.txt | 2 +- > Documentation/process/submit-checklist.rst | 2 +- > .../translations/it_IT/process/submit-checklist.rst | 2 +- > Documentation/translations/ko_KR/memory-barriers.txt | 2 +- > .../translations/zh_CN/filesystems/sysfs.txt | 2 +- > .../translations/zh_CN/process/submit-checklist.rst | 2 +- > Documentation/virt/kvm/arm/pvtime.rst | 2 +- > Documentation/virt/kvm/devices/vcpu.rst | 2 +- > Documentation/virt/kvm/hypercalls.rst | 4 ++-- > arch/powerpc/include/uapi/asm/kvm_para.h | 2 +- > drivers/gpu/drm/Kconfig | 2 +- > drivers/gpu/drm/drm_ioctl.c | 2 +- These two look very correct. The patch that moved edid.rst seems to have not updated a lot of references :-/ Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> > drivers/hwtracing/coresight/Kconfig | 2 +- > fs/fat/Kconfig | 8 ++++---- > fs/fuse/Kconfig | 2 +- > fs/fuse/dev.c | 2 +- > fs/nfs/Kconfig | 2 +- > fs/overlayfs/Kconfig | 6 +++--- > include/linux/mm.h | 4 ++-- > include/uapi/linux/ethtool_netlink.h | 2 +- > include/uapi/rdma/rdma_user_ioctl_cmds.h | 2 +- > mm/gup.c | 12 ++++++------ > net/ipv4/Kconfig | 6 +++--- > net/ipv4/ipconfig.c | 2 +- > virt/kvm/arm/vgic/vgic-mmio-v3.c | 2 +- > virt/kvm/arm/vgic/vgic.h | 4 ++-- > 28 files changed, 47 insertions(+), 47 deletions(-) > > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt > index 8be1d0bbfd16..e0fe9f70d22b 100644 > --- a/Documentation/admin-guide/kernel-parameters.txt > +++ b/Documentation/admin-guide/kernel-parameters.txt > @@ -957,7 +957,7 @@ > edid/1680x1050.bin, or edid/1920x1080.bin is given > and no file with the same name exists. Details and > instructions how to build your own EDID data are > - available in Documentation/driver-api/edid.rst. An EDID > + available in Documentation/admin-guide/edid.rst. An EDID > data set will only be used for a particular connector, > if its name and a colon are prepended to the EDID > name. Each connector may use a unique EDID data > @@ -1884,7 +1884,7 @@ > No delay > > ip= [IP_PNP] > - See Documentation/filesystems/nfs/nfsroot.txt. > + See Documentation/admin-guide/nfs/nfsroot.rst. > > ipcmni_extend [KNL] Extend the maximum number of unique System V > IPC identifiers from 32,768 to 16,777,216. > @@ -2863,13 +2863,13 @@ > Default value is 0. > > nfsaddrs= [NFS] Deprecated. Use ip= instead. > - See Documentation/filesystems/nfs/nfsroot.txt. > + See Documentation/admin-guide/nfs/nfsroot.rst. > > nfsroot= [NFS] nfs root filesystem for disk-less boxes. > - See Documentation/filesystems/nfs/nfsroot.txt. > + See Documentation/admin-guide/nfs/nfsroot.rst. > > nfsrootdebug [NFS] enable nfsroot debugging messages. > - See Documentation/filesystems/nfs/nfsroot.txt. > + See Documentation/admin-guide/nfs/nfsroot.rst. > > nfs.callback_nr_threads= > [NFSv4] set the total number of threads that the > diff --git a/Documentation/filesystems/cifs/cifsroot.txt b/Documentation/filesystems/cifs/cifsroot.txt > index 0fa1a2c36a40..947b7ec6ce9e 100644 > --- a/Documentation/filesystems/cifs/cifsroot.txt > +++ b/Documentation/filesystems/cifs/cifsroot.txt > @@ -13,7 +13,7 @@ network by utilizing SMB or CIFS protocol. > > In order to mount, the network stack will also need to be set up by > using 'ip=' config option. For more details, see > -Documentation/filesystems/nfs/nfsroot.txt. > +Documentation/admin-guide/nfs/nfsroot.rst. > > A CIFS root mount currently requires the use of SMB1+UNIX Extensions > which is only supported by the Samba server. SMB1 is the older > diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt > index e1c355e84edd..eaabc3134294 100644 > --- a/Documentation/memory-barriers.txt > +++ b/Documentation/memory-barriers.txt > @@ -620,7 +620,7 @@ because the CPUs that the Linux kernel supports don't do writes > until they are certain (1) that the write will actually happen, (2) > of the location of the write, and (3) of the value to be written. > But please carefully read the "CONTROL DEPENDENCIES" section and the > -Documentation/RCU/rcu_dereference.txt file: The compiler can and does > +Documentation/RCU/rcu_dereference.rst file: The compiler can and does > break dependencies in a great many highly creative ways. > > CPU 1 CPU 2 > diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst > index 8e56337d422d..3f8e9d5d95c2 100644 > --- a/Documentation/process/submit-checklist.rst > +++ b/Documentation/process/submit-checklist.rst > @@ -107,7 +107,7 @@ and elsewhere regarding submitting Linux kernel patches. > and why. > > 26) If any ioctl's are added by the patch, then also update > - ``Documentation/ioctl/ioctl-number.rst``. > + ``Documentation/userspace-api/ioctl/ioctl-number.rst``. > > 27) If your modified source code depends on or uses any of the kernel > APIs or features that are related to the following ``Kconfig`` symbols, > diff --git a/Documentation/translations/it_IT/process/submit-checklist.rst b/Documentation/translations/it_IT/process/submit-checklist.rst > index 995ee69fab11..3e575502690f 100644 > --- a/Documentation/translations/it_IT/process/submit-checklist.rst > +++ b/Documentation/translations/it_IT/process/submit-checklist.rst > @@ -117,7 +117,7 @@ sottomissione delle patch, in particolare > sorgenti che ne spieghi la logica: cosa fanno e perché. > > 25) Se la patch aggiunge nuove chiamate ioctl, allora aggiornate > - ``Documentation/ioctl/ioctl-number.rst``. > + ``Documentation/userspace-api/ioctl/ioctl-number.rst``. > > 26) Se il codice che avete modificato dipende o usa una qualsiasi interfaccia o > funzionalità del kernel che è associata a uno dei seguenti simboli > diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt > index 2e831ece6e26..e50fe6541335 100644 > --- a/Documentation/translations/ko_KR/memory-barriers.txt > +++ b/Documentation/translations/ko_KR/memory-barriers.txt > @@ -641,7 +641,7 @@ P 는 짝수 번호 캐시 라인에 저장되어 있고, 변수 B 는 홀수 > 리눅스 커널이 지원하는 CPU 들은 (1) 쓰기가 정말로 일어날지, (2) 쓰기가 어디에 > 이루어질지, 그리고 (3) 쓰여질 값을 확실히 알기 전까지는 쓰기를 수행하지 않기 > 때문입니다. 하지만 "컨트롤 의존성" 섹션과 > -Documentation/RCU/rcu_dereference.txt 파일을 주의 깊게 읽어 주시기 바랍니다: > +Documentation/RCU/rcu_dereference.rst 파일을 주의 깊게 읽어 주시기 바랍니다: > 컴파일러는 매우 창의적인 많은 방법으로 종속성을 깰 수 있습니다. > > CPU 1 CPU 2 > diff --git a/Documentation/translations/zh_CN/filesystems/sysfs.txt b/Documentation/translations/zh_CN/filesystems/sysfs.txt > index ee1f37da5b23..a15c3ebdfa82 100644 > --- a/Documentation/translations/zh_CN/filesystems/sysfs.txt > +++ b/Documentation/translations/zh_CN/filesystems/sysfs.txt > @@ -281,7 +281,7 @@ drivers/ 包含了每个已为特定总线上的设备而挂载的驱动程序 > 假定驱动没有跨越多个总线类型)。 > > fs/ 包含了一个为文件系统设立的目录。现在每个想要导出属性的文件系统必须 > -在 fs/ 下创建自己的层次结构(参见Documentation/filesystems/fuse.txt)。 > +在 fs/ 下创建自己的层次结构(参见Documentation/filesystems/fuse.rst)。 > > dev/ 包含两个子目录： char/ 和 block/。在这两个子目录中，有以 > <major>:<minor> 格式命名的符号链接。这些符号链接指向 sysfs 目录 > diff --git a/Documentation/translations/zh_CN/process/submit-checklist.rst b/Documentation/translations/zh_CN/process/submit-checklist.rst > index 8738c55e42a2..50386e0e42e7 100644 > --- a/Documentation/translations/zh_CN/process/submit-checklist.rst > +++ b/Documentation/translations/zh_CN/process/submit-checklist.rst > @@ -97,7 +97,7 @@ Linux内核补丁提交清单 > 24) 所有内存屏障例如 ``barrier()``, ``rmb()``, ``wmb()`` 都需要源代码中的注 > 释来解释它们正在执行的操作及其原因的逻辑。 > > -25) 如果补丁添加了任何ioctl，那么也要更新 ``Documentation/ioctl/ioctl-number.rst`` > +25) 如果补丁添加了任何ioctl，那么也要更新 ``Documentation/userspace-api/ioctl/ioctl-number.rst`` > > 26) 如果修改后的源代码依赖或使用与以下 ``Kconfig`` 符号相关的任何内核API或 > 功能，则在禁用相关 ``Kconfig`` 符号和/或 ``=m`` （如果该选项可用）的情况 > diff --git a/Documentation/virt/kvm/arm/pvtime.rst b/Documentation/virt/kvm/arm/pvtime.rst > index 2357dd2d8655..687b60d76ca9 100644 > --- a/Documentation/virt/kvm/arm/pvtime.rst > +++ b/Documentation/virt/kvm/arm/pvtime.rst > @@ -76,5 +76,5 @@ It is advisable that one or more 64k pages are set aside for the purpose of > these structures and not used for other purposes, this enables the guest to map > the region using 64k pages and avoids conflicting attributes with other memory. > > -For the user space interface see Documentation/virt/kvm/devices/vcpu.txt > +For the user space interface see Documentation/virt/kvm/devices/vcpu.rst > section "3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL". > diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst > index 9963e680770a..ca374d3fe085 100644 > --- a/Documentation/virt/kvm/devices/vcpu.rst > +++ b/Documentation/virt/kvm/devices/vcpu.rst > @@ -110,5 +110,5 @@ Returns: > > Specifies the base address of the stolen time structure for this VCPU. The > base address must be 64 byte aligned and exist within a valid guest memory > -region. See Documentation/virt/kvm/arm/pvtime.txt for more information > +region. See Documentation/virt/kvm/arm/pvtime.rst for more information > including the layout of the stolen time structure. > diff --git a/Documentation/virt/kvm/hypercalls.rst b/Documentation/virt/kvm/hypercalls.rst > index dbaf207e560d..ed4fddd364ea 100644 > --- a/Documentation/virt/kvm/hypercalls.rst > +++ b/Documentation/virt/kvm/hypercalls.rst > @@ -22,7 +22,7 @@ S390: > number in R1. > > For further information on the S390 diagnose call as supported by KVM, > - refer to Documentation/virt/kvm/s390-diag.txt. > + refer to Documentation/virt/kvm/s390-diag.rst. > > PowerPC: > It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers. > @@ -30,7 +30,7 @@ PowerPC: > > KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions' > property inside the device tree's /hypervisor node. > - For more information refer to Documentation/virt/kvm/ppc-pv.txt > + For more information refer to Documentation/virt/kvm/ppc-pv.rst > > MIPS: > KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall > diff --git a/arch/powerpc/include/uapi/asm/kvm_para.h b/arch/powerpc/include/uapi/asm/kvm_para.h > index be48c2215fa2..a809b1b44ddf 100644 > --- a/arch/powerpc/include/uapi/asm/kvm_para.h > +++ b/arch/powerpc/include/uapi/asm/kvm_para.h > @@ -31,7 +31,7 @@ > * Struct fields are always 32 or 64 bit aligned, depending on them being 32 > * or 64 bit wide respectively. > * > - * See Documentation/virt/kvm/ppc-pv.txt > + * See Documentation/virt/kvm/ppc-pv.rst > */ > struct kvm_vcpu_arch_shared { > __u64 scratch1; > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > index d0aa6cff2e02..df0970994655 100644 > --- a/drivers/gpu/drm/Kconfig > +++ b/drivers/gpu/drm/Kconfig > @@ -164,7 +164,7 @@ config DRM_LOAD_EDID_FIRMWARE > monitor are unable to provide appropriate EDID data. Since this > feature is provided as a workaround for broken hardware, the > default case is N. Details and instructions how to build your own > - EDID data are given in Documentation/driver-api/edid.rst. > + EDID data are given in Documentation/admin-guide/edid.rst. > > config DRM_DP_CEC > bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support" > diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c > index 5afb39688b55..e469e701b381 100644 > --- a/drivers/gpu/drm/drm_ioctl.c > +++ b/drivers/gpu/drm/drm_ioctl.c > @@ -740,7 +740,7 @@ static const struct drm_ioctl_desc drm_ioctls[] = { > * }; > * > * Please make sure that you follow all the best practices from > - * ``Documentation/ioctl/botching-up-ioctls.rst``. Note that drm_ioctl() > + * ``Documentation/process/botching-up-ioctls.rst``. Note that drm_ioctl() > * automatically zero-extends structures, hence make sure you can add more stuff > * at the end, i.e. don't put a variable sized array there. > * > diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig > index 6ff30e25af55..6d42a6d3766f 100644 > --- a/drivers/hwtracing/coresight/Kconfig > +++ b/drivers/hwtracing/coresight/Kconfig > @@ -107,7 +107,7 @@ config CORESIGHT_CPU_DEBUG > can quickly get to know program counter (PC), secure state, > exception level, etc. Before use debugging functionality, platform > needs to ensure the clock domain and power domain are enabled > - properly, please refer Documentation/trace/coresight-cpu-debug.rst > + properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst > for detailed description and the example for usage. > > endif > diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig > index 718163d0c621..ca31993dcb47 100644 > --- a/fs/fat/Kconfig > +++ b/fs/fat/Kconfig > @@ -69,7 +69,7 @@ config VFAT_FS > > The VFAT support enlarges your kernel by about 10 KB and it only > works if you said Y to the "DOS FAT fs support" above. Please read > - the file <file:Documentation/filesystems/vfat.txt> for details. If > + the file <file:Documentation/filesystems/vfat.rst> for details. If > unsure, say Y. > > To compile this as a module, choose M here: the module will be called > @@ -82,7 +82,7 @@ config FAT_DEFAULT_CODEPAGE > help > This option should be set to the codepage of your FAT filesystems. > It can be overridden with the "codepage" mount option. > - See <file:Documentation/filesystems/vfat.txt> for more information. > + See <file:Documentation/filesystems/vfat.rst> for more information. > > config FAT_DEFAULT_IOCHARSET > string "Default iocharset for FAT" > @@ -96,7 +96,7 @@ config FAT_DEFAULT_IOCHARSET > Note that "utf8" is not recommended for FAT filesystems. > If unsure, you shouldn't set "utf8" here - select the next option > instead if you would like to use UTF-8 encoded file names by default. > - See <file:Documentation/filesystems/vfat.txt> for more information. > + See <file:Documentation/filesystems/vfat.rst> for more information. > > Enable any character sets you need in File Systems/Native Language > Support. > @@ -114,4 +114,4 @@ config FAT_DEFAULT_UTF8 > > Say Y if you use UTF-8 encoding for file names, N otherwise. > > - See <file:Documentation/filesystems/vfat.txt> for more information. > + See <file:Documentation/filesystems/vfat.rst> for more information. > diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig > index eb2a585572dc..774b2618018a 100644 > --- a/fs/fuse/Kconfig > +++ b/fs/fuse/Kconfig > @@ -12,7 +12,7 @@ config FUSE_FS > although chances are your distribution already has that library > installed if you've installed the "fuse" package itself. > > - See <file:Documentation/filesystems/fuse.txt> for more information. > + See <file:Documentation/filesystems/fuse.rst> for more information. > See <file:Documentation/Changes> for needed library/utility version. > > If you want to develop a userspace FS, or if you want to use > diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c > index 97eec7522bf2..c7a65cf2bcca 100644 > --- a/fs/fuse/dev.c > +++ b/fs/fuse/dev.c > @@ -2081,7 +2081,7 @@ static void end_polls(struct fuse_conn *fc) > * The same effect is usually achievable through killing the filesystem daemon > * and all users of the filesystem. The exception is the combination of an > * asynchronous request and the tricky deadlock (see > - * Documentation/filesystems/fuse.txt). > + * Documentation/filesystems/fuse.rst). > * > * Aborting requests under I/O goes as follows: 1: Separate out unlocked > * requests, they should be finished off immediately. Locked requests will be > diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig > index 40b6c5ac46c0..88e1763e02f3 100644 > --- a/fs/nfs/Kconfig > +++ b/fs/nfs/Kconfig > @@ -164,7 +164,7 @@ config ROOT_NFS > If you want your system to mount its root file system via NFS, > choose Y here. This is common practice for managing systems > without local permanent storage. For details, read > - <file:Documentation/filesystems/nfs/nfsroot.txt>. > + <file:Documentation/admin-guide/nfs/nfsroot.rst>. > > Most people say N here. > > diff --git a/fs/overlayfs/Kconfig b/fs/overlayfs/Kconfig > index 444e2da4f60e..b35e128ee2fd 100644 > --- a/fs/overlayfs/Kconfig > +++ b/fs/overlayfs/Kconfig > @@ -9,7 +9,7 @@ config OVERLAY_FS > 'lower' filesystem is either hidden or, in the case of directories, > merged with the 'upper' object. > > - For more information see Documentation/filesystems/overlayfs.txt > + For more information see Documentation/filesystems/overlayfs.rst > > config OVERLAY_FS_REDIRECT_DIR > bool "Overlayfs: turn on redirect directory feature by default" > @@ -38,7 +38,7 @@ config OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW > If backward compatibility is not an issue, then it is safe and > recommended to say N here. > > - For more information, see Documentation/filesystems/overlayfs.txt > + For more information, see Documentation/filesystems/overlayfs.rst > > If unsure, say Y. > > @@ -102,7 +102,7 @@ config OVERLAY_FS_XINO_AUTO > If compatibility with applications that expect 32bit inodes is not an > issue, then it is safe and recommended to say Y here. > > - For more information, see Documentation/filesystems/overlayfs.txt > + For more information, see Documentation/filesystems/overlayfs.rst > > If unsure, say N. > > diff --git a/include/linux/mm.h b/include/linux/mm.h > index 9f8fb6a34157..65ced68ab010 100644 > --- a/include/linux/mm.h > +++ b/include/linux/mm.h > @@ -1108,7 +1108,7 @@ void unpin_user_pages(struct page **pages, unsigned long npages); > * used to track the pincount (instead using of the GUP_PIN_COUNTING_BIAS > * scheme). > * > - * For more information, please see Documentation/vm/pin_user_pages.rst. > + * For more information, please see Documentation/core-api/pin_user_pages.rst. > * > * @page: pointer to page to be queried. > * @Return: True, if it is likely that the page has been "dma-pinned". > @@ -2711,7 +2711,7 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address, > * releasing pages: get_user_pages*() pages must be released via put_page(), > * while pin_user_pages*() pages must be released via unpin_user_page(). > * > - * Please see Documentation/vm/pin_user_pages.rst for more information. > + * Please see Documentation/core-api/pin_user_pages.rst for more information. > */ > > static inline int vm_fault_to_errno(vm_fault_t vm_fault, int foll_flags) > diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h > index 7e0b460f872c..76513acc650f 100644 > --- a/include/uapi/linux/ethtool_netlink.h > +++ b/include/uapi/linux/ethtool_netlink.h > @@ -2,7 +2,7 @@ > /* > * include/uapi/linux/ethtool_netlink.h - netlink interface for ethtool > * > - * See Documentation/networking/ethtool-netlink.txt in kernel source tree for > + * See Documentation/networking/ethtool-netlink.rst in kernel source tree for > * doucumentation of the interface. > */ > > diff --git a/include/uapi/rdma/rdma_user_ioctl_cmds.h b/include/uapi/rdma/rdma_user_ioctl_cmds.h > index 7b1ec806f8f9..38ab7accb7be 100644 > --- a/include/uapi/rdma/rdma_user_ioctl_cmds.h > +++ b/include/uapi/rdma/rdma_user_ioctl_cmds.h > @@ -36,7 +36,7 @@ > #include <linux/types.h> > #include <linux/ioctl.h> > > -/* Documentation/ioctl/ioctl-number.rst */ > +/* Documentation/userspace-api/ioctl/ioctl-number.rst */ > #define RDMA_IOCTL_MAGIC 0x1b > #define RDMA_VERBS_IOCTL \ > _IOWR(RDMA_IOCTL_MAGIC, 1, struct ib_uverbs_ioctl_hdr) > diff --git a/mm/gup.c b/mm/gup.c > index 441f7a48f370..bbf2d627b7f3 100644 > --- a/mm/gup.c > +++ b/mm/gup.c > @@ -2770,9 +2770,9 @@ EXPORT_SYMBOL_GPL(get_user_pages_fast); > * the arguments here are identical. > * > * FOLL_PIN means that the pages must be released via unpin_user_page(). Please > - * see Documentation/vm/pin_user_pages.rst for further details. > + * see Documentation/core-api/pin_user_pages.rst for further details. > * > - * This is intended for Case 1 (DIO) in Documentation/vm/pin_user_pages.rst. It > + * This is intended for Case 1 (DIO) in Documentation/core-api/pin_user_pages.rst. It > * is NOT intended for Case 2 (RDMA: long-term pins). > */ > int pin_user_pages_fast(unsigned long start, int nr_pages, > @@ -2795,9 +2795,9 @@ EXPORT_SYMBOL_GPL(pin_user_pages_fast); > * the arguments here are identical. > * > * FOLL_PIN means that the pages must be released via unpin_user_page(). Please > - * see Documentation/vm/pin_user_pages.rst for details. > + * see Documentation/core-api/pin_user_pages.rst for details. > * > - * This is intended for Case 1 (DIO) in Documentation/vm/pin_user_pages.rst. It > + * This is intended for Case 1 (DIO) in Documentation/core-api/pin_user_pages.rst. It > * is NOT intended for Case 2 (RDMA: long-term pins). > */ > long pin_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm, > @@ -2822,9 +2822,9 @@ EXPORT_SYMBOL(pin_user_pages_remote); > * FOLL_PIN is set. > * > * FOLL_PIN means that the pages must be released via unpin_user_page(). Please > - * see Documentation/vm/pin_user_pages.rst for details. > + * see Documentation/core-api/pin_user_pages.rst for details. > * > - * This is intended for Case 1 (DIO) in Documentation/vm/pin_user_pages.rst. It > + * This is intended for Case 1 (DIO) in Documentation/core-api/pin_user_pages.rst. It > * is NOT intended for Case 2 (RDMA: long-term pins). > */ > long pin_user_pages(unsigned long start, unsigned long nr_pages, > diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig > index 6490b845e17b..25a8888826b8 100644 > --- a/net/ipv4/Kconfig > +++ b/net/ipv4/Kconfig > @@ -129,7 +129,7 @@ config IP_PNP_DHCP > > If unsure, say Y. Note that if you want to use DHCP, a DHCP server > must be operating on your network. Read > - <file:Documentation/filesystems/nfs/nfsroot.txt> for details. > + <file:Documentation/admin-guide/nfs/nfsroot.rst> for details. > > config IP_PNP_BOOTP > bool "IP: BOOTP support" > @@ -144,7 +144,7 @@ config IP_PNP_BOOTP > does BOOTP itself, providing all necessary information on the kernel > command line, you can say N here. If unsure, say Y. Note that if you > want to use BOOTP, a BOOTP server must be operating on your network. > - Read <file:Documentation/filesystems/nfs/nfsroot.txt> for details. > + Read <file:Documentation/admin-guide/nfs/nfsroot.rst> for details. > > config IP_PNP_RARP > bool "IP: RARP support" > @@ -157,7 +157,7 @@ config IP_PNP_RARP > older protocol which is being obsoleted by BOOTP and DHCP), say Y > here. Note that if you want to use RARP, a RARP server must be > operating on your network. Read > - <file:Documentation/filesystems/nfs/nfsroot.txt> for details. > + <file:Documentation/admin-guide/nfs/nfsroot.rst> for details. > > config NET_IPIP > tristate "IP: tunneling" > diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c > index 4438f6b12335..561f15b5a944 100644 > --- a/net/ipv4/ipconfig.c > +++ b/net/ipv4/ipconfig.c > @@ -1621,7 +1621,7 @@ late_initcall(ip_auto_config); > > /* > * Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel > - * command line parameter. See Documentation/filesystems/nfs/nfsroot.txt. > + * command line parameter. See Documentation/admin-guide/nfs/nfsroot.rst. > */ > static int __init ic_proto_name(char *name) > { > diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c > index ebc218840fc2..84fcd88cc34e 100644 > --- a/virt/kvm/arm/vgic/vgic-mmio-v3.c > +++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c > @@ -252,7 +252,7 @@ static unsigned long vgic_v3_uaccess_read_pending(struct kvm_vcpu *vcpu, > * pending state of interrupt is latched in pending_latch variable. > * Userspace will save and restore pending state and line_level > * separately. > - * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.txt > + * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.rst > * for handling of ISPENDR and ICPENDR. > */ > for (i = 0; i < len * 8; i++) { > diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h > index c7fefd6b1c80..42166ce359b4 100644 > --- a/virt/kvm/arm/vgic/vgic.h > +++ b/virt/kvm/arm/vgic/vgic.h > @@ -42,7 +42,7 @@ > VGIC_AFFINITY_LEVEL(val, 3)) > > /* > - * As per Documentation/virt/kvm/devices/arm-vgic-v3.txt, > + * As per Documentation/virt/kvm/devices/arm-vgic-v3.rst, > * below macros are defined for CPUREG encoding. > */ > #define KVM_REG_ARM_VGIC_SYSREG_OP0_MASK 0x000000000000c000 > @@ -63,7 +63,7 @@ > KVM_REG_ARM_VGIC_SYSREG_OP2_MASK) > > /* > - * As per Documentation/virt/kvm/devices/arm-vgic-its.txt, > + * As per Documentation/virt/kvm/devices/arm-vgic-its.rst, > * below macros are defined for ITS table entry encoding. > */ > #define KVM_ITS_CTE_VALID_SHIFT 63 > -- > 2.24.1 >
Quoting Mauro Carvalho Chehab (2020-02-22 01:00:03) > Several references got broken due to txt to ReST conversion. > > Several of them can be automatically fixed with: > > scripts/documentation-file-ref-check --fix > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> > --- > drivers/hwtracing/coresight/Kconfig | 2 +- > > diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig > index 6ff30e25af55..6d42a6d3766f 100644 > --- a/drivers/hwtracing/coresight/Kconfig > +++ b/drivers/hwtracing/coresight/Kconfig > @@ -107,7 +107,7 @@ config CORESIGHT_CPU_DEBUG > can quickly get to know program counter (PC), secure state, > exception level, etc. Before use debugging functionality, platform > needs to ensure the clock domain and power domain are enabled > - properly, please refer Documentation/trace/coresight-cpu-debug.rst > + properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst > for detailed description and the example for usage. > > endif I ran into this today and almost sent a patch. Can you split this patch up into more pieces and send it off to the respective subsystem maintainers?
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8be1d0bbfd16..e0fe9f70d22b 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -957,7 +957,7 @@ edid/1680x1050.bin, or edid/1920x1080.bin is given and no file with the same name exists. Details and instructions how to build your own EDID data are - available in Documentation/driver-api/edid.rst. An EDID + available in Documentation/admin-guide/edid.rst. An EDID data set will only be used for a particular connector, if its name and a colon are prepended to the EDID name. Each connector may use a unique EDID data @@ -1884,7 +1884,7 @@ No delay ip= [IP_PNP] - See Documentation/filesystems/nfs/nfsroot.txt. + See Documentation/admin-guide/nfs/nfsroot.rst. ipcmni_extend [KNL] Extend the maximum number of unique System V IPC identifiers from 32,768 to 16,777,216. @@ -2863,13 +2863,13 @@ Default value is 0. nfsaddrs= [NFS] Deprecated. Use ip= instead. - See Documentation/filesystems/nfs/nfsroot.txt. + See Documentation/admin-guide/nfs/nfsroot.rst. nfsroot= [NFS] nfs root filesystem for disk-less boxes. - See Documentation/filesystems/nfs/nfsroot.txt. + See Documentation/admin-guide/nfs/nfsroot.rst. nfsrootdebug [NFS] enable nfsroot debugging messages. - See Documentation/filesystems/nfs/nfsroot.txt. + See Documentation/admin-guide/nfs/nfsroot.rst. nfs.callback_nr_threads= [NFSv4] set the total number of threads that the diff --git a/Documentation/filesystems/cifs/cifsroot.txt b/Documentation/filesystems/cifs/cifsroot.txt index 0fa1a2c36a40..947b7ec6ce9e 100644 --- a/Documentation/filesystems/cifs/cifsroot.txt +++ b/Documentation/filesystems/cifs/cifsroot.txt @@ -13,7 +13,7 @@ network by utilizing SMB or CIFS protocol. In order to mount, the network stack will also need to be set up by using 'ip=' config option. For more details, see -Documentation/filesystems/nfs/nfsroot.txt. +Documentation/admin-guide/nfs/nfsroot.rst. A CIFS root mount currently requires the use of SMB1+UNIX Extensions which is only supported by the Samba server. SMB1 is the older diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index e1c355e84edd..eaabc3134294 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -620,7 +620,7 @@ because the CPUs that the Linux kernel supports don't do writes until they are certain (1) that the write will actually happen, (2) of the location of the write, and (3) of the value to be written. But please carefully read the "CONTROL DEPENDENCIES" section and the -Documentation/RCU/rcu_dereference.txt file: The compiler can and does +Documentation/RCU/rcu_dereference.rst file: The compiler can and does break dependencies in a great many highly creative ways. CPU 1 CPU 2 diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst index 8e56337d422d..3f8e9d5d95c2 100644 --- a/Documentation/process/submit-checklist.rst +++ b/Documentation/process/submit-checklist.rst @@ -107,7 +107,7 @@ and elsewhere regarding submitting Linux kernel patches. and why. 26) If any ioctl's are added by the patch, then also update - ``Documentation/ioctl/ioctl-number.rst``. + ``Documentation/userspace-api/ioctl/ioctl-number.rst``. 27) If your modified source code depends on or uses any of the kernel APIs or features that are related to the following ``Kconfig`` symbols, diff --git a/Documentation/translations/it_IT/process/submit-checklist.rst b/Documentation/translations/it_IT/process/submit-checklist.rst index 995ee69fab11..3e575502690f 100644 --- a/Documentation/translations/it_IT/process/submit-checklist.rst +++ b/Documentation/translations/it_IT/process/submit-checklist.rst @@ -117,7 +117,7 @@ sottomissione delle patch, in particolare sorgenti che ne spieghi la logica: cosa fanno e perché. 25) Se la patch aggiunge nuove chiamate ioctl, allora aggiornate - ``Documentation/ioctl/ioctl-number.rst``. + ``Documentation/userspace-api/ioctl/ioctl-number.rst``. 26) Se il codice che avete modificato dipende o usa una qualsiasi interfaccia o funzionalità del kernel che è associata a uno dei seguenti simboli diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index 2e831ece6e26..e50fe6541335 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -641,7 +641,7 @@ P 는 짝수 번호 캐시 라인에 저장되어 있고, 변수 B 는 홀수 리눅스 커널이 지원하는 CPU 들은 (1) 쓰기가 정말로 일어날지, (2) 쓰기가 어디에 이루어질지, 그리고 (3) 쓰여질 값을 확실히 알기 전까지는 쓰기를 수행하지 않기 때문입니다. 하지만 "컨트롤 의존성" 섹션과 -Documentation/RCU/rcu_dereference.txt 파일을 주의 깊게 읽어 주시기 바랍니다: +Documentation/RCU/rcu_dereference.rst 파일을 주의 깊게 읽어 주시기 바랍니다: 컴파일러는 매우 창의적인 많은 방법으로 종속성을 깰 수 있습니다. CPU 1 CPU 2 diff --git a/Documentation/translations/zh_CN/filesystems/sysfs.txt b/Documentation/translations/zh_CN/filesystems/sysfs.txt index ee1f37da5b23..a15c3ebdfa82 100644 --- a/Documentation/translations/zh_CN/filesystems/sysfs.txt +++ b/Documentation/translations/zh_CN/filesystems/sysfs.txt @@ -281,7 +281,7 @@ drivers/ 包含了每个已为特定总线上的设备而挂载的驱动程序 假定驱动没有跨越多个总线类型)。 fs/ 包含了一个为文件系统设立的目录。现在每个想要导出属性的文件系统必须 -在 fs/ 下创建自己的层次结构(参见Documentation/filesystems/fuse.txt)。 +在 fs/ 下创建自己的层次结构(参见Documentation/filesystems/fuse.rst)。 dev/ 包含两个子目录： char/ 和 block/。在这两个子目录中，有以 <major>:<minor> 格式命名的符号链接。这些符号链接指向 sysfs 目录 diff --git a/Documentation/translations/zh_CN/process/submit-checklist.rst b/Documentation/translations/zh_CN/process/submit-checklist.rst index 8738c55e42a2..50386e0e42e7 100644 --- a/Documentation/translations/zh_CN/process/submit-checklist.rst +++ b/Documentation/translations/zh_CN/process/submit-checklist.rst @@ -97,7 +97,7 @@ Linux内核补丁提交清单 24) 所有内存屏障例如 ``barrier()``, ``rmb()``, ``wmb()`` 都需要源代码中的注 释来解释它们正在执行的操作及其原因的逻辑。 -25) 如果补丁添加了任何ioctl，那么也要更新 ``Documentation/ioctl/ioctl-number.rst`` +25) 如果补丁添加了任何ioctl，那么也要更新 ``Documentation/userspace-api/ioctl/ioctl-number.rst`` 26) 如果修改后的源代码依赖或使用与以下 ``Kconfig`` 符号相关的任何内核API或 功能，则在禁用相关 ``Kconfig`` 符号和/或 ``=m`` （如果该选项可用）的情况 diff --git a/Documentation/virt/kvm/arm/pvtime.rst b/Documentation/virt/kvm/arm/pvtime.rst index 2357dd2d8655..687b60d76ca9 100644 --- a/Documentation/virt/kvm/arm/pvtime.rst +++ b/Documentation/virt/kvm/arm/pvtime.rst @@ -76,5 +76,5 @@ It is advisable that one or more 64k pages are set aside for the purpose of these structures and not used for other purposes, this enables the guest to map the region using 64k pages and avoids conflicting attributes with other memory. -For the user space interface see Documentation/virt/kvm/devices/vcpu.txt +For the user space interface see Documentation/virt/kvm/devices/vcpu.rst section "3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL". diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst index 9963e680770a..ca374d3fe085 100644 --- a/Documentation/virt/kvm/devices/vcpu.rst +++ b/Documentation/virt/kvm/devices/vcpu.rst @@ -110,5 +110,5 @@ Returns: Specifies the base address of the stolen time structure for this VCPU. The base address must be 64 byte aligned and exist within a valid guest memory -region. See Documentation/virt/kvm/arm/pvtime.txt for more information +region. See Documentation/virt/kvm/arm/pvtime.rst for more information including the layout of the stolen time structure. diff --git a/Documentation/virt/kvm/hypercalls.rst b/Documentation/virt/kvm/hypercalls.rst index dbaf207e560d..ed4fddd364ea 100644 --- a/Documentation/virt/kvm/hypercalls.rst +++ b/Documentation/virt/kvm/hypercalls.rst @@ -22,7 +22,7 @@ S390: number in R1. For further information on the S390 diagnose call as supported by KVM, - refer to Documentation/virt/kvm/s390-diag.txt. + refer to Documentation/virt/kvm/s390-diag.rst. PowerPC: It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers. @@ -30,7 +30,7 @@ PowerPC: KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions' property inside the device tree's /hypervisor node. - For more information refer to Documentation/virt/kvm/ppc-pv.txt + For more information refer to Documentation/virt/kvm/ppc-pv.rst MIPS: KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall diff --git a/arch/powerpc/include/uapi/asm/kvm_para.h b/arch/powerpc/include/uapi/asm/kvm_para.h index be48c2215fa2..a809b1b44ddf 100644 --- a/arch/powerpc/include/uapi/asm/kvm_para.h +++ b/arch/powerpc/include/uapi/asm/kvm_para.h @@ -31,7 +31,7 @@ * Struct fields are always 32 or 64 bit aligned, depending on them being 32 * or 64 bit wide respectively. * - * See Documentation/virt/kvm/ppc-pv.txt + * See Documentation/virt/kvm/ppc-pv.rst */ struct kvm_vcpu_arch_shared { __u64 scratch1; diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index d0aa6cff2e02..df0970994655 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -164,7 +164,7 @@ config DRM_LOAD_EDID_FIRMWARE monitor are unable to provide appropriate EDID data. Since this feature is provided as a workaround for broken hardware, the default case is N. Details and instructions how to build your own - EDID data are given in Documentation/driver-api/edid.rst. + EDID data are given in Documentation/admin-guide/edid.rst. config DRM_DP_CEC bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support" diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c index 5afb39688b55..e469e701b381 100644 --- a/drivers/gpu/drm/drm_ioctl.c +++ b/drivers/gpu/drm/drm_ioctl.c @@ -740,7 +740,7 @@ static const struct drm_ioctl_desc drm_ioctls[] = { * }; * * Please make sure that you follow all the best practices from - * ``Documentation/ioctl/botching-up-ioctls.rst``. Note that drm_ioctl() + * ``Documentation/process/botching-up-ioctls.rst``. Note that drm_ioctl() * automatically zero-extends structures, hence make sure you can add more stuff * at the end, i.e. don't put a variable sized array there. * diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig index 6ff30e25af55..6d42a6d3766f 100644 --- a/drivers/hwtracing/coresight/Kconfig +++ b/drivers/hwtracing/coresight/Kconfig @@ -107,7 +107,7 @@ config CORESIGHT_CPU_DEBUG can quickly get to know program counter (PC), secure state, exception level, etc. Before use debugging functionality, platform needs to ensure the clock domain and power domain are enabled - properly, please refer Documentation/trace/coresight-cpu-debug.rst + properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst for detailed description and the example for usage. endif diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig index 718163d0c621..ca31993dcb47 100644 --- a/fs/fat/Kconfig +++ b/fs/fat/Kconfig @@ -69,7 +69,7 @@ config VFAT_FS The VFAT support enlarges your kernel by about 10 KB and it only works if you said Y to the "DOS FAT fs support" above. Please read - the file <file:Documentation/filesystems/vfat.txt> for details. If + the file <file:Documentation/filesystems/vfat.rst> for details. If unsure, say Y. To compile this as a module, choose M here: the module will be called @@ -82,7 +82,7 @@ config FAT_DEFAULT_CODEPAGE help This option should be set to the codepage of your FAT filesystems. It can be overridden with the "codepage" mount option. - See <file:Documentation/filesystems/vfat.txt> for more information. + See <file:Documentation/filesystems/vfat.rst> for more information. config FAT_DEFAULT_IOCHARSET string "Default iocharset for FAT" @@ -96,7 +96,7 @@ config FAT_DEFAULT_IOCHARSET Note that "utf8" is not recommended for FAT filesystems. If unsure, you shouldn't set "utf8" here - select the next option instead if you would like to use UTF-8 encoded file names by default. - See <file:Documentation/filesystems/vfat.txt> for more information. + See <file:Documentation/filesystems/vfat.rst> for more information. Enable any character sets you need in File Systems/Native Language Support. @@ -114,4 +114,4 @@ config FAT_DEFAULT_UTF8 Say Y if you use UTF-8 encoding for file names, N otherwise. - See <file:Documentation/filesystems/vfat.txt> for more information. + See <file:Documentation/filesystems/vfat.rst> for more information. diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig index eb2a585572dc..774b2618018a 100644 --- a/fs/fuse/Kconfig +++ b/fs/fuse/Kconfig @@ -12,7 +12,7 @@ config FUSE_FS although chances are your distribution already has that library installed if you've installed the "fuse" package itself. - See <file:Documentation/filesystems/fuse.txt> for more information. + See <file:Documentation/filesystems/fuse.rst> for more information. See <file:Documentation/Changes> for needed library/utility version. If you want to develop a userspace FS, or if you want to use diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 97eec7522bf2..c7a65cf2bcca 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -2081,7 +2081,7 @@ static void end_polls(struct fuse_conn *fc) * The same effect is usually achievable through killing the filesystem daemon * and all users of the filesystem. The exception is the combination of an * asynchronous request and the tricky deadlock (see - * Documentation/filesystems/fuse.txt). + * Documentation/filesystems/fuse.rst). * * Aborting requests under I/O goes as follows: 1: Separate out unlocked * requests, they should be finished off immediately. Locked requests will be diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig index 40b6c5ac46c0..88e1763e02f3 100644 --- a/fs/nfs/Kconfig +++ b/fs/nfs/Kconfig @@ -164,7 +164,7 @@ config ROOT_NFS If you want your system to mount its root file system via NFS, choose Y here. This is common practice for managing systems without local permanent storage. For details, read - <file:Documentation/filesystems/nfs/nfsroot.txt>. + <file:Documentation/admin-guide/nfs/nfsroot.rst>. Most people say N here. diff --git a/fs/overlayfs/Kconfig b/fs/overlayfs/Kconfig index 444e2da4f60e..b35e128ee2fd 100644 --- a/fs/overlayfs/Kconfig +++ b/fs/overlayfs/Kconfig @@ -9,7 +9,7 @@ config OVERLAY_FS 'lower' filesystem is either hidden or, in the case of directories, merged with the 'upper' object. - For more information see Documentation/filesystems/overlayfs.txt + For more information see Documentation/filesystems/overlayfs.rst config OVERLAY_FS_REDIRECT_DIR bool "Overlayfs: turn on redirect directory feature by default" @@ -38,7 +38,7 @@ config OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW If backward compatibility is not an issue, then it is safe and recommended to say N here. - For more information, see Documentation/filesystems/overlayfs.txt + For more information, see Documentation/filesystems/overlayfs.rst If unsure, say Y. @@ -102,7 +102,7 @@ config OVERLAY_FS_XINO_AUTO If compatibility with applications that expect 32bit inodes is not an issue, then it is safe and recommended to say Y here. - For more information, see Documentation/filesystems/overlayfs.txt + For more information, see Documentation/filesystems/overlayfs.rst If unsure, say N. diff --git a/include/linux/mm.h b/include/linux/mm.h index 9f8fb6a34157..65ced68ab010 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1108,7 +1108,7 @@ void unpin_user_pages(struct page **pages, unsigned long npages); * used to track the pincount (instead using of the GUP_PIN_COUNTING_BIAS * scheme). * - * For more information, please see Documentation/vm/pin_user_pages.rst. + * For more information, please see Documentation/core-api/pin_user_pages.rst. * * @page: pointer to page to be queried. * @Return: True, if it is likely that the page has been "dma-pinned". @@ -2711,7 +2711,7 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address, * releasing pages: get_user_pages*() pages must be released via put_page(), * while pin_user_pages*() pages must be released via unpin_user_page(). * - * Please see Documentation/vm/pin_user_pages.rst for more information. + * Please see Documentation/core-api/pin_user_pages.rst for more information. */ static inline int vm_fault_to_errno(vm_fault_t vm_fault, int foll_flags) diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 7e0b460f872c..76513acc650f 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -2,7 +2,7 @@ /* * include/uapi/linux/ethtool_netlink.h - netlink interface for ethtool * - * See Documentation/networking/ethtool-netlink.txt in kernel source tree for + * See Documentation/networking/ethtool-netlink.rst in kernel source tree for * doucumentation of the interface. */ diff --git a/include/uapi/rdma/rdma_user_ioctl_cmds.h b/include/uapi/rdma/rdma_user_ioctl_cmds.h index 7b1ec806f8f9..38ab7accb7be 100644 --- a/include/uapi/rdma/rdma_user_ioctl_cmds.h +++ b/include/uapi/rdma/rdma_user_ioctl_cmds.h @@ -36,7 +36,7 @@ #include <linux/types.h> #include <linux/ioctl.h> -/* Documentation/ioctl/ioctl-number.rst */ +/* Documentation/userspace-api/ioctl/ioctl-number.rst */ #define RDMA_IOCTL_MAGIC 0x1b #define RDMA_VERBS_IOCTL \ _IOWR(RDMA_IOCTL_MAGIC, 1, struct ib_uverbs_ioctl_hdr) diff --git a/mm/gup.c b/mm/gup.c index 441f7a48f370..bbf2d627b7f3 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -2770,9 +2770,9 @@ EXPORT_SYMBOL_GPL(get_user_pages_fast); * the arguments here are identical. * * FOLL_PIN means that the pages must be released via unpin_user_page(). Please - * see Documentation/vm/pin_user_pages.rst for further details. + * see Documentation/core-api/pin_user_pages.rst for further details. * - * This is intended for Case 1 (DIO) in Documentation/vm/pin_user_pages.rst. It + * This is intended for Case 1 (DIO) in Documentation/core-api/pin_user_pages.rst. It * is NOT intended for Case 2 (RDMA: long-term pins). */ int pin_user_pages_fast(unsigned long start, int nr_pages, @@ -2795,9 +2795,9 @@ EXPORT_SYMBOL_GPL(pin_user_pages_fast); * the arguments here are identical. * * FOLL_PIN means that the pages must be released via unpin_user_page(). Please - * see Documentation/vm/pin_user_pages.rst for details. + * see Documentation/core-api/pin_user_pages.rst for details. * - * This is intended for Case 1 (DIO) in Documentation/vm/pin_user_pages.rst. It + * This is intended for Case 1 (DIO) in Documentation/core-api/pin_user_pages.rst. It * is NOT intended for Case 2 (RDMA: long-term pins). */ long pin_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm, @@ -2822,9 +2822,9 @@ EXPORT_SYMBOL(pin_user_pages_remote); * FOLL_PIN is set. * * FOLL_PIN means that the pages must be released via unpin_user_page(). Please - * see Documentation/vm/pin_user_pages.rst for details. + * see Documentation/core-api/pin_user_pages.rst for details. * - * This is intended for Case 1 (DIO) in Documentation/vm/pin_user_pages.rst. It + * This is intended for Case 1 (DIO) in Documentation/core-api/pin_user_pages.rst. It * is NOT intended for Case 2 (RDMA: long-term pins). */ long pin_user_pages(unsigned long start, unsigned long nr_pages, diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 6490b845e17b..25a8888826b8 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -129,7 +129,7 @@ config IP_PNP_DHCP If unsure, say Y. Note that if you want to use DHCP, a DHCP server must be operating on your network. Read - <file:Documentation/filesystems/nfs/nfsroot.txt> for details. + <file:Documentation/admin-guide/nfs/nfsroot.rst> for details. config IP_PNP_BOOTP bool "IP: BOOTP support" @@ -144,7 +144,7 @@ config IP_PNP_BOOTP does BOOTP itself, providing all necessary information on the kernel command line, you can say N here. If unsure, say Y. Note that if you want to use BOOTP, a BOOTP server must be operating on your network. - Read <file:Documentation/filesystems/nfs/nfsroot.txt> for details. + Read <file:Documentation/admin-guide/nfs/nfsroot.rst> for details. config IP_PNP_RARP bool "IP: RARP support" @@ -157,7 +157,7 @@ config IP_PNP_RARP older protocol which is being obsoleted by BOOTP and DHCP), say Y here. Note that if you want to use RARP, a RARP server must be operating on your network. Read - <file:Documentation/filesystems/nfs/nfsroot.txt> for details. + <file:Documentation/admin-guide/nfs/nfsroot.rst> for details. config NET_IPIP tristate "IP: tunneling" diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 4438f6b12335..561f15b5a944 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -1621,7 +1621,7 @@ late_initcall(ip_auto_config); /* * Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel - * command line parameter. See Documentation/filesystems/nfs/nfsroot.txt. + * command line parameter. See Documentation/admin-guide/nfs/nfsroot.rst. */ static int __init ic_proto_name(char *name) { diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c index ebc218840fc2..84fcd88cc34e 100644 --- a/virt/kvm/arm/vgic/vgic-mmio-v3.c +++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c @@ -252,7 +252,7 @@ static unsigned long vgic_v3_uaccess_read_pending(struct kvm_vcpu *vcpu, * pending state of interrupt is latched in pending_latch variable. * Userspace will save and restore pending state and line_level * separately. - * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.txt + * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.rst * for handling of ISPENDR and ICPENDR. */ for (i = 0; i < len * 8; i++) { diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h index c7fefd6b1c80..42166ce359b4 100644 --- a/virt/kvm/arm/vgic/vgic.h +++ b/virt/kvm/arm/vgic/vgic.h @@ -42,7 +42,7 @@ VGIC_AFFINITY_LEVEL(val, 3)) /* - * As per Documentation/virt/kvm/devices/arm-vgic-v3.txt, + * As per Documentation/virt/kvm/devices/arm-vgic-v3.rst, * below macros are defined for CPUREG encoding. */ #define KVM_REG_ARM_VGIC_SYSREG_OP0_MASK 0x000000000000c000 @@ -63,7 +63,7 @@ KVM_REG_ARM_VGIC_SYSREG_OP2_MASK) /* - * As per Documentation/virt/kvm/devices/arm-vgic-its.txt, + * As per Documentation/virt/kvm/devices/arm-vgic-its.rst, * below macros are defined for ITS table entry encoding. */ #define KVM_ITS_CTE_VALID_SHIFT 63
Several references got broken due to txt to ReST conversion. Several of them can be automatically fixed with: scripts/documentation-file-ref-check --fix Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- Documentation/admin-guide/kernel-parameters.txt | 10 +++++----- Documentation/filesystems/cifs/cifsroot.txt | 2 +- Documentation/memory-barriers.txt | 2 +- Documentation/process/submit-checklist.rst | 2 +- .../translations/it_IT/process/submit-checklist.rst | 2 +- Documentation/translations/ko_KR/memory-barriers.txt | 2 +- .../translations/zh_CN/filesystems/sysfs.txt | 2 +- .../translations/zh_CN/process/submit-checklist.rst | 2 +- Documentation/virt/kvm/arm/pvtime.rst | 2 +- Documentation/virt/kvm/devices/vcpu.rst | 2 +- Documentation/virt/kvm/hypercalls.rst | 4 ++-- arch/powerpc/include/uapi/asm/kvm_para.h | 2 +- drivers/gpu/drm/Kconfig | 2 +- drivers/gpu/drm/drm_ioctl.c | 2 +- drivers/hwtracing/coresight/Kconfig | 2 +- fs/fat/Kconfig | 8 ++++---- fs/fuse/Kconfig | 2 +- fs/fuse/dev.c | 2 +- fs/nfs/Kconfig | 2 +- fs/overlayfs/Kconfig | 6 +++--- include/linux/mm.h | 4 ++-- include/uapi/linux/ethtool_netlink.h | 2 +- include/uapi/rdma/rdma_user_ioctl_cmds.h | 2 +- mm/gup.c | 12 ++++++------ net/ipv4/Kconfig | 6 +++--- net/ipv4/ipconfig.c | 2 +- virt/kvm/arm/vgic/vgic-mmio-v3.c | 2 +- virt/kvm/arm/vgic/vgic.h | 4 ++-- 28 files changed, 47 insertions(+), 47 deletions(-)