| Message ID | 20200325130605.2420-2-alexandru.tachici@analog.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | hwmon: pmbus: adm1266: add support | expand |
Hi, On 3/25/20 6:06 AM, alexandru.tachici@analog.com wrote: > From: Alexandru Tachici <alexandru.tachici@analog.com> > > Add pmbus probing driver for the adm1266 Cascadable > Super Sequencer with Margin Control and Fault Recording. > Driver is using the pmbus_core, creating sysfs files > under hwmon for inputs: vh1->vh4 and vp1->vp13. > > Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> It looks like the driver is reduced to just standard functionality. Can you try just adding the device ID to pmbus.c ? Thanks, Guenter > --- > Documentation/hwmon/adm1266.rst | 35 +++++++++++++++++++ > drivers/hwmon/pmbus/Kconfig | 9 +++++ > drivers/hwmon/pmbus/Makefile | 1 + > drivers/hwmon/pmbus/adm1266.c | 62 +++++++++++++++++++++++++++++++++ > 4 files changed, 107 insertions(+) > create mode 100644 Documentation/hwmon/adm1266.rst > create mode 100644 drivers/hwmon/pmbus/adm1266.c > > diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst > new file mode 100644 > index 000000000000..65662115750c > --- /dev/null > +++ b/Documentation/hwmon/adm1266.rst > @@ -0,0 +1,35 @@ > +Kernel driver adm1266 > +===================== > + > +Supported chips: > + * Analog Devices ADM1266 > + Prefix: 'adm1266' > + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf > + > +Author: Alexandru Tachici <alexandru.tachici@analog.com> > + > + > +Description > +----------- > + > +This driver supports hardware monitoring for Analog Devices ADM1266 sequencer. > + > +ADM1266 is a sequencer that features voltage readback from 17 channels via an > +integrated 12 bit SAR ADC, accessed using a PMBus interface. > + > +The driver is a client driver to the core PMBus driver. Please see > +Documentation/hwmon/pmbus for details on PMBus client drivers. > + > + > +Sysfs entries > +------------- > + > +The following attributes are supported. Limits are read-write, history reset > +attributes are write-only, all other attributes are read-only. > + > +inX_label "voutx" > +inX_input Measured voltage. > +inX_min Minimum Voltage. > +inX_max Maximum voltage. > +inX_min_alarm Voltage low alarm. > +inX_max_alarm Voltage high alarm. > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig > index a9ea06204767..3096e46e2212 100644 > --- a/drivers/hwmon/pmbus/Kconfig > +++ b/drivers/hwmon/pmbus/Kconfig > @@ -26,6 +26,15 @@ config SENSORS_PMBUS > This driver can also be built as a module. If so, the module will > be called pmbus. > > +config SENSORS_ADM1266 > + tristate "Analog Devices ADM1266" > + help > + If you say yes here you get hardware monitoring support for Analog > + Devices ADM1266 Cascadable Super Sequencer. > + > + This driver can also be built as a module. If so, the module will > + be called adm1266. > + > config SENSORS_ADM1275 > tristate "Analog Devices ADM1275 and compatibles" > help > diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile > index 5feb45806123..ed38f6d6f845 100644 > --- a/drivers/hwmon/pmbus/Makefile > +++ b/drivers/hwmon/pmbus/Makefile > @@ -5,6 +5,7 @@ > > obj-$(CONFIG_PMBUS) += pmbus_core.o > obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o > +obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o > obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o > obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o > obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o > diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c > new file mode 100644 > index 000000000000..c1df21d564f3 > --- /dev/null > +++ b/drivers/hwmon/pmbus/adm1266.c > @@ -0,0 +1,62 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * ADM1266 - Cascadable Super Sequencer with Margin > + * Control and Fault Recording > + * > + * Copyright 2020 Analog Devices Inc. > + */ > + > +#include <linux/i2c.h> > +#include <linux/init.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/slab.h> > + > +#include "pmbus.h" > + > +static int adm1266_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct pmbus_driver_info *info; > + u32 funcs; > + int i; > + > + info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info), > + GFP_KERNEL); > + > + info->pages = 17; > + info->format[PSC_VOLTAGE_OUT] = linear; > + funcs = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; > + for (i = 0; i < info->pages; i++) > + info->func[i] = funcs; > + > + return pmbus_do_probe(client, id, info); > +} > + > +static const struct of_device_id adm1266_of_match[] = { > + { .compatible = "adi,adm1266" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, adm1266_of_match); > + > +static const struct i2c_device_id adm1266_id[] = { > + { "adm1266", 0 }, > + { }, > +}; > +MODULE_DEVICE_TABLE(i2c, adm1266_id); > + > +static struct i2c_driver adm1266_driver = { > + .driver = { > + .name = "adm1266", > + .of_match_table = adm1266_of_match, > + }, > + .probe = adm1266_probe, > + .remove = pmbus_do_remove, > + .id_table = adm1266_id, > +}; > + > +module_i2c_driver(adm1266_driver); > + > +MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>"); > +MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266"); > +MODULE_LICENSE("GPL v2"); >
diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst new file mode 100644 index 000000000000..65662115750c --- /dev/null +++ b/Documentation/hwmon/adm1266.rst @@ -0,0 +1,35 @@ +Kernel driver adm1266 +===================== + +Supported chips: + * Analog Devices ADM1266 + Prefix: 'adm1266' + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf + +Author: Alexandru Tachici <alexandru.tachici@analog.com> + + +Description +----------- + +This driver supports hardware monitoring for Analog Devices ADM1266 sequencer. + +ADM1266 is a sequencer that features voltage readback from 17 channels via an +integrated 12 bit SAR ADC, accessed using a PMBus interface. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write, history reset +attributes are write-only, all other attributes are read-only. + +inX_label "voutx" +inX_input Measured voltage. +inX_min Minimum Voltage. +inX_max Maximum voltage. +inX_min_alarm Voltage low alarm. +inX_max_alarm Voltage high alarm. diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index a9ea06204767..3096e46e2212 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -26,6 +26,15 @@ config SENSORS_PMBUS This driver can also be built as a module. If so, the module will be called pmbus. +config SENSORS_ADM1266 + tristate "Analog Devices ADM1266" + help + If you say yes here you get hardware monitoring support for Analog + Devices ADM1266 Cascadable Super Sequencer. + + This driver can also be built as a module. If so, the module will + be called adm1266. + config SENSORS_ADM1275 tristate "Analog Devices ADM1275 and compatibles" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 5feb45806123..ed38f6d6f845 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_PMBUS) += pmbus_core.o obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o +obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c new file mode 100644 index 000000000000..c1df21d564f3 --- /dev/null +++ b/drivers/hwmon/pmbus/adm1266.c @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ADM1266 - Cascadable Super Sequencer with Margin + * Control and Fault Recording + * + * Copyright 2020 Analog Devices Inc. + */ + +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include "pmbus.h" + +static int adm1266_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pmbus_driver_info *info; + u32 funcs; + int i; + + info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info), + GFP_KERNEL); + + info->pages = 17; + info->format[PSC_VOLTAGE_OUT] = linear; + funcs = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + for (i = 0; i < info->pages; i++) + info->func[i] = funcs; + + return pmbus_do_probe(client, id, info); +} + +static const struct of_device_id adm1266_of_match[] = { + { .compatible = "adi,adm1266" }, + { }, +}; +MODULE_DEVICE_TABLE(of, adm1266_of_match); + +static const struct i2c_device_id adm1266_id[] = { + { "adm1266", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, adm1266_id); + +static struct i2c_driver adm1266_driver = { + .driver = { + .name = "adm1266", + .of_match_table = adm1266_of_match, + }, + .probe = adm1266_probe, + .remove = pmbus_do_remove, + .id_table = adm1266_id, +}; + +module_i2c_driver(adm1266_driver); + +MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>"); +MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266"); +MODULE_LICENSE("GPL v2");