| Message ID | 1584880579-12178-20-git-send-email-yi.l.liu@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | intel_iommu: expose Shared Virtual Addressing to VMs | expand |
On Sun, Mar 22, 2020 at 05:36:16AM -0700, Liu Yi L wrote: > This patch adds the basic PASID-based iotlb (piotlb) invalidation > support. piotlb is used during walking Intel VT-d 1st level page > table. This patch only adds the basic processing. Detailed handling > will be added in next patch. > > Cc: Kevin Tian <kevin.tian@intel.com> > Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> > Cc: Peter Xu <peterx@redhat.com> > Cc: Yi Sun <yi.y.sun@linux.intel.com> > Cc: Paolo Bonzini <pbonzini@redhat.com> > Cc: Richard Henderson <rth@twiddle.net> > Cc: Eduardo Habkost <ehabkost@redhat.com> > Signed-off-by: Liu Yi L <yi.l.liu@intel.com> > --- > hw/i386/intel_iommu.c | 57 ++++++++++++++++++++++++++++++++++++++++++ > hw/i386/intel_iommu_internal.h | 13 ++++++++++ > 2 files changed, 70 insertions(+) > > diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c > index b007715..b9ac07d 100644 > --- a/hw/i386/intel_iommu.c > +++ b/hw/i386/intel_iommu.c > @@ -3134,6 +3134,59 @@ static bool vtd_process_pasid_desc(IntelIOMMUState *s, > return (ret == 0) ? true : false; > } > > +static void vtd_piotlb_pasid_invalidate(IntelIOMMUState *s, > + uint16_t domain_id, > + uint32_t pasid) > +{ > +} > + > +static void vtd_piotlb_page_invalidate(IntelIOMMUState *s, uint16_t domain_id, > + uint32_t pasid, hwaddr addr, uint8_t am, bool ih) > +{ > +} > + > +static bool vtd_process_piotlb_desc(IntelIOMMUState *s, > + VTDInvDesc *inv_desc) > +{ > + uint16_t domain_id; > + uint32_t pasid; > + uint8_t am; > + hwaddr addr; > + > + if ((inv_desc->val[0] & VTD_INV_DESC_PIOTLB_RSVD_VAL0) || > + (inv_desc->val[1] & VTD_INV_DESC_PIOTLB_RSVD_VAL1)) { > + error_report_once("non-zero-field-in-piotlb_inv_desc hi: 0x%" PRIx64 > + " lo: 0x%" PRIx64, inv_desc->val[1], inv_desc->val[0]); > + return false; > + } > + > + domain_id = VTD_INV_DESC_PIOTLB_DID(inv_desc->val[0]); > + pasid = VTD_INV_DESC_PIOTLB_PASID(inv_desc->val[0]); > + switch (inv_desc->val[0] & VTD_INV_DESC_IOTLB_G) { > + case VTD_INV_DESC_PIOTLB_ALL_IN_PASID: > + vtd_piotlb_pasid_invalidate(s, domain_id, pasid); > + break; > + > + case VTD_INV_DESC_PIOTLB_PSI_IN_PASID: > + am = VTD_INV_DESC_PIOTLB_AM(inv_desc->val[1]); > + addr = (hwaddr) VTD_INV_DESC_PIOTLB_ADDR(inv_desc->val[1]); > + if (am > VTD_MAMV) { I saw this of spec 10.4.2, MAMV: Independent of value reported in this field, implementations supporting SMTS must support address-selective PASID-based IOTLB invalidations (p_iotlb_inv_dsc) with any defined address mask. Does it mean we should even support larger AM? Besides that, the patch looks good to me. > + error_report_once("Invalid am, > max am value, hi: 0x%" PRIx64 > + " lo: 0x%" PRIx64, inv_desc->val[1], inv_desc->val[0]); > + return false; > + } > + vtd_piotlb_page_invalidate(s, domain_id, pasid, > + addr, am, VTD_INV_DESC_PIOTLB_IH(inv_desc->val[1])); > + break; > + > + default: > + error_report_once("Invalid granularity in P-IOTLB desc hi: 0x%" PRIx64 > + " lo: 0x%" PRIx64, inv_desc->val[1], inv_desc->val[0]); > + return false; > + } > + return true; > +} > + > static bool vtd_process_inv_iec_desc(IntelIOMMUState *s, > VTDInvDesc *inv_desc) > { > @@ -3248,6 +3301,10 @@ static bool vtd_process_inv_desc(IntelIOMMUState *s) > break; > > case VTD_INV_DESC_PIOTLB: > + trace_vtd_inv_desc("p-iotlb", inv_desc.val[1], inv_desc.val[0]); > + if (!vtd_process_piotlb_desc(s, &inv_desc)) { > + return false; > + } > break; > > case VTD_INV_DESC_WAIT: > diff --git a/hw/i386/intel_iommu_internal.h b/hw/i386/intel_iommu_internal.h > index 6f32d7b..314e2c4 100644 > --- a/hw/i386/intel_iommu_internal.h > +++ b/hw/i386/intel_iommu_internal.h > @@ -457,6 +457,19 @@ typedef union VTDInvDesc VTDInvDesc; > #define VTD_INV_DESC_PASIDC_PASID_SI (1ULL << 4) > #define VTD_INV_DESC_PASIDC_GLOBAL (3ULL << 4) > > +#define VTD_INV_DESC_PIOTLB_ALL_IN_PASID (2ULL << 4) > +#define VTD_INV_DESC_PIOTLB_PSI_IN_PASID (3ULL << 4) > + > +#define VTD_INV_DESC_PIOTLB_RSVD_VAL0 0xfff000000000ffc0ULL > +#define VTD_INV_DESC_PIOTLB_RSVD_VAL1 0xf80ULL > + > +#define VTD_INV_DESC_PIOTLB_PASID(val) (((val) >> 32) & 0xfffffULL) > +#define VTD_INV_DESC_PIOTLB_DID(val) (((val) >> 16) & \ > + VTD_DOMAIN_ID_MASK) > +#define VTD_INV_DESC_PIOTLB_ADDR(val) ((val) & ~0xfffULL) > +#define VTD_INV_DESC_PIOTLB_AM(val) ((val) & 0x3fULL) > +#define VTD_INV_DESC_PIOTLB_IH(val) (((val) >> 6) & 0x1) > + > /* Information about page-selective IOTLB invalidate */ > struct VTDIOTLBPageInvInfo { > uint16_t domain_id; > -- > 2.7.4 >
> From: Peter Xu <peterx@redhat.com> > Sent: Wednesday, March 25, 2020 2:26 AM > To: Liu, Yi L <yi.l.liu@intel.com> > Subject: Re: [PATCH v1 19/22] intel_iommu: process PASID-based iotlb invalidation > > On Sun, Mar 22, 2020 at 05:36:16AM -0700, Liu Yi L wrote: > > This patch adds the basic PASID-based iotlb (piotlb) invalidation > > support. piotlb is used during walking Intel VT-d 1st level page > > table. This patch only adds the basic processing. Detailed handling > > will be added in next patch. > > > > Cc: Kevin Tian <kevin.tian@intel.com> > > Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> > > Cc: Peter Xu <peterx@redhat.com> > > Cc: Yi Sun <yi.y.sun@linux.intel.com> > > Cc: Paolo Bonzini <pbonzini@redhat.com> > > Cc: Richard Henderson <rth@twiddle.net> > > Cc: Eduardo Habkost <ehabkost@redhat.com> > > Signed-off-by: Liu Yi L <yi.l.liu@intel.com> > > --- > > hw/i386/intel_iommu.c | 57 > ++++++++++++++++++++++++++++++++++++++++++ > > hw/i386/intel_iommu_internal.h | 13 ++++++++++ > > 2 files changed, 70 insertions(+) > > > > diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c index > > b007715..b9ac07d 100644 > > --- a/hw/i386/intel_iommu.c > > +++ b/hw/i386/intel_iommu.c > > @@ -3134,6 +3134,59 @@ static bool vtd_process_pasid_desc(IntelIOMMUState > *s, > > return (ret == 0) ? true : false; } > > > > +static void vtd_piotlb_pasid_invalidate(IntelIOMMUState *s, > > + uint16_t domain_id, > > + uint32_t pasid) { } > > + > > +static void vtd_piotlb_page_invalidate(IntelIOMMUState *s, uint16_t domain_id, > > + uint32_t pasid, hwaddr addr, uint8_t am, > > +bool ih) { } > > + > > +static bool vtd_process_piotlb_desc(IntelIOMMUState *s, > > + VTDInvDesc *inv_desc) { > > + uint16_t domain_id; > > + uint32_t pasid; > > + uint8_t am; > > + hwaddr addr; > > + > > + if ((inv_desc->val[0] & VTD_INV_DESC_PIOTLB_RSVD_VAL0) || > > + (inv_desc->val[1] & VTD_INV_DESC_PIOTLB_RSVD_VAL1)) { > > + error_report_once("non-zero-field-in-piotlb_inv_desc hi: 0x%" PRIx64 > > + " lo: 0x%" PRIx64, inv_desc->val[1], inv_desc->val[0]); > > + return false; > > + } > > + > > + domain_id = VTD_INV_DESC_PIOTLB_DID(inv_desc->val[0]); > > + pasid = VTD_INV_DESC_PIOTLB_PASID(inv_desc->val[0]); > > + switch (inv_desc->val[0] & VTD_INV_DESC_IOTLB_G) { > > + case VTD_INV_DESC_PIOTLB_ALL_IN_PASID: > > + vtd_piotlb_pasid_invalidate(s, domain_id, pasid); > > + break; > > + > > + case VTD_INV_DESC_PIOTLB_PSI_IN_PASID: > > + am = VTD_INV_DESC_PIOTLB_AM(inv_desc->val[1]); > > + addr = (hwaddr) VTD_INV_DESC_PIOTLB_ADDR(inv_desc->val[1]); > > + if (am > VTD_MAMV) { > > I saw this of spec 10.4.2, MAMV: > > Independent of value reported in this field, implementations > supporting SMTS must support address-selective PASID-based > IOTLB invalidations (p_iotlb_inv_dsc) with any defined address > mask. > > Does it mean we should even support larger AM? > > Besides that, the patch looks good to me. I don't think so. This field is for second-level table in scalable mode and the translation table in legacy mode. For first-level table, it always supports page selective invalidation and all the supported masks regardless of the PSI support bit and the MAMV field in the CAP_REG. Regards, Yi Liu
On Wed, Mar 25, 2020 at 01:36:03PM +0000, Liu, Yi L wrote: > > From: Peter Xu <peterx@redhat.com> > > Sent: Wednesday, March 25, 2020 2:26 AM > > To: Liu, Yi L <yi.l.liu@intel.com> > > Subject: Re: [PATCH v1 19/22] intel_iommu: process PASID-based iotlb invalidation > > > > On Sun, Mar 22, 2020 at 05:36:16AM -0700, Liu Yi L wrote: > > > This patch adds the basic PASID-based iotlb (piotlb) invalidation > > > support. piotlb is used during walking Intel VT-d 1st level page > > > table. This patch only adds the basic processing. Detailed handling > > > will be added in next patch. > > > > > > Cc: Kevin Tian <kevin.tian@intel.com> > > > Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> > > > Cc: Peter Xu <peterx@redhat.com> > > > Cc: Yi Sun <yi.y.sun@linux.intel.com> > > > Cc: Paolo Bonzini <pbonzini@redhat.com> > > > Cc: Richard Henderson <rth@twiddle.net> > > > Cc: Eduardo Habkost <ehabkost@redhat.com> > > > Signed-off-by: Liu Yi L <yi.l.liu@intel.com> > > > --- > > > hw/i386/intel_iommu.c | 57 > > ++++++++++++++++++++++++++++++++++++++++++ > > > hw/i386/intel_iommu_internal.h | 13 ++++++++++ > > > 2 files changed, 70 insertions(+) > > > > > > diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c index > > > b007715..b9ac07d 100644 > > > --- a/hw/i386/intel_iommu.c > > > +++ b/hw/i386/intel_iommu.c > > > @@ -3134,6 +3134,59 @@ static bool vtd_process_pasid_desc(IntelIOMMUState > > *s, > > > return (ret == 0) ? true : false; } > > > > > > +static void vtd_piotlb_pasid_invalidate(IntelIOMMUState *s, > > > + uint16_t domain_id, > > > + uint32_t pasid) { } > > > + > > > +static void vtd_piotlb_page_invalidate(IntelIOMMUState *s, uint16_t domain_id, > > > + uint32_t pasid, hwaddr addr, uint8_t am, > > > +bool ih) { } > > > + > > > +static bool vtd_process_piotlb_desc(IntelIOMMUState *s, > > > + VTDInvDesc *inv_desc) { > > > + uint16_t domain_id; > > > + uint32_t pasid; > > > + uint8_t am; > > > + hwaddr addr; > > > + > > > + if ((inv_desc->val[0] & VTD_INV_DESC_PIOTLB_RSVD_VAL0) || > > > + (inv_desc->val[1] & VTD_INV_DESC_PIOTLB_RSVD_VAL1)) { > > > + error_report_once("non-zero-field-in-piotlb_inv_desc hi: 0x%" PRIx64 > > > + " lo: 0x%" PRIx64, inv_desc->val[1], inv_desc->val[0]); > > > + return false; > > > + } > > > + > > > + domain_id = VTD_INV_DESC_PIOTLB_DID(inv_desc->val[0]); > > > + pasid = VTD_INV_DESC_PIOTLB_PASID(inv_desc->val[0]); > > > + switch (inv_desc->val[0] & VTD_INV_DESC_IOTLB_G) { > > > + case VTD_INV_DESC_PIOTLB_ALL_IN_PASID: > > > + vtd_piotlb_pasid_invalidate(s, domain_id, pasid); > > > + break; > > > + > > > + case VTD_INV_DESC_PIOTLB_PSI_IN_PASID: > > > + am = VTD_INV_DESC_PIOTLB_AM(inv_desc->val[1]); > > > + addr = (hwaddr) VTD_INV_DESC_PIOTLB_ADDR(inv_desc->val[1]); > > > + if (am > VTD_MAMV) { > > > > I saw this of spec 10.4.2, MAMV: > > > > Independent of value reported in this field, implementations > > supporting SMTS must support address-selective PASID-based > > IOTLB invalidations (p_iotlb_inv_dsc) with any defined address > > mask. > > > > Does it mean we should even support larger AM? > > > > Besides that, the patch looks good to me. > > I don't think so. This field is for second-level table in scalable mode > and the translation table in legacy mode. For first-level table, it always > supports page selective invalidation and all the supported masks > regardless of the PSI support bit and the MAMV field in the CAP_REG. Yes that's exactly what I wanted to ask... Let me try again. I thought VTD_MAMV was only for 2nd level page table, not for pasid-iotlb invalidations. So I think we should remove this "if" check (that corresponds to "we should even support larger AM"), right?
> From: Peter Xu <peterx@redhat.com> > Sent: Wednesday, March 25, 2020 11:16 PM > To: Liu, Yi L <yi.l.liu@intel.com> > Subject: Re: [PATCH v1 19/22] intel_iommu: process PASID-based iotlb invalidation > > On Wed, Mar 25, 2020 at 01:36:03PM +0000, Liu, Yi L wrote: > > > From: Peter Xu <peterx@redhat.com> > > > Sent: Wednesday, March 25, 2020 2:26 AM > > > To: Liu, Yi L <yi.l.liu@intel.com> > > > Subject: Re: [PATCH v1 19/22] intel_iommu: process PASID-based iotlb > > > invalidation > > > > > > On Sun, Mar 22, 2020 at 05:36:16AM -0700, Liu Yi L wrote: > > > > This patch adds the basic PASID-based iotlb (piotlb) invalidation > > > > support. piotlb is used during walking Intel VT-d 1st level page > > > > table. This patch only adds the basic processing. Detailed > > > > handling will be added in next patch. > > > > > > > > Cc: Kevin Tian <kevin.tian@intel.com> > > > > Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> > > > > Cc: Peter Xu <peterx@redhat.com> > > > > Cc: Yi Sun <yi.y.sun@linux.intel.com> > > > > Cc: Paolo Bonzini <pbonzini@redhat.com> > > > > Cc: Richard Henderson <rth@twiddle.net> > > > > Cc: Eduardo Habkost <ehabkost@redhat.com> > > > > Signed-off-by: Liu Yi L <yi.l.liu@intel.com> > > > > --- > > > > hw/i386/intel_iommu.c | 57 > > > ++++++++++++++++++++++++++++++++++++++++++ > > > > hw/i386/intel_iommu_internal.h | 13 ++++++++++ > > > > 2 files changed, 70 insertions(+) > > > > > > > > diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c index > > > > b007715..b9ac07d 100644 > > > > --- a/hw/i386/intel_iommu.c > > > > +++ b/hw/i386/intel_iommu.c > > > > @@ -3134,6 +3134,59 @@ static bool > > > > vtd_process_pasid_desc(IntelIOMMUState > > > *s, > > > > return (ret == 0) ? true : false; } > > > > > > > > +static void vtd_piotlb_pasid_invalidate(IntelIOMMUState *s, > > > > + uint16_t domain_id, > > > > + uint32_t pasid) { } > > > > + > > > > +static void vtd_piotlb_page_invalidate(IntelIOMMUState *s, uint16_t > domain_id, > > > > + uint32_t pasid, hwaddr addr, uint8_t > > > > +am, bool ih) { } > > > > + > > > > +static bool vtd_process_piotlb_desc(IntelIOMMUState *s, > > > > + VTDInvDesc *inv_desc) { > > > > + uint16_t domain_id; > > > > + uint32_t pasid; > > > > + uint8_t am; > > > > + hwaddr addr; > > > > + > > > > + if ((inv_desc->val[0] & VTD_INV_DESC_PIOTLB_RSVD_VAL0) || > > > > + (inv_desc->val[1] & VTD_INV_DESC_PIOTLB_RSVD_VAL1)) { > > > > + error_report_once("non-zero-field-in-piotlb_inv_desc hi: 0x%" PRIx64 > > > > + " lo: 0x%" PRIx64, inv_desc->val[1], inv_desc->val[0]); > > > > + return false; > > > > + } > > > > + > > > > + domain_id = VTD_INV_DESC_PIOTLB_DID(inv_desc->val[0]); > > > > + pasid = VTD_INV_DESC_PIOTLB_PASID(inv_desc->val[0]); > > > > + switch (inv_desc->val[0] & VTD_INV_DESC_IOTLB_G) { > > > > + case VTD_INV_DESC_PIOTLB_ALL_IN_PASID: > > > > + vtd_piotlb_pasid_invalidate(s, domain_id, pasid); > > > > + break; > > > > + > > > > + case VTD_INV_DESC_PIOTLB_PSI_IN_PASID: > > > > + am = VTD_INV_DESC_PIOTLB_AM(inv_desc->val[1]); > > > > + addr = (hwaddr) VTD_INV_DESC_PIOTLB_ADDR(inv_desc->val[1]); > > > > + if (am > VTD_MAMV) { > > > > > > I saw this of spec 10.4.2, MAMV: > > > > > > Independent of value reported in this field, implementations > > > supporting SMTS must support address-selective PASID-based > > > IOTLB invalidations (p_iotlb_inv_dsc) with any defined address > > > mask. > > > > > > Does it mean we should even support larger AM? > > > > > > Besides that, the patch looks good to me. > > > > I don't think so. This field is for second-level table in scalable > > mode and the translation table in legacy mode. For first-level table, > > it always supports page selective invalidation and all the supported > > masks regardless of the PSI support bit and the MAMV field in the CAP_REG. > > Yes that's exactly what I wanted to ask... Let me try again. > > I thought VTD_MAMV was only for 2nd level page table, not for pasid-iotlb > invalidations. So I think we should remove this "if" > check (that corresponds to "we should even support larger AM"), right? Right. I confirmed with spec owner. Will remove it. :-) Regards, Yi Liu
diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c index b007715..b9ac07d 100644 --- a/hw/i386/intel_iommu.c +++ b/hw/i386/intel_iommu.c @@ -3134,6 +3134,59 @@ static bool vtd_process_pasid_desc(IntelIOMMUState *s, return (ret == 0) ? true : false; } +static void vtd_piotlb_pasid_invalidate(IntelIOMMUState *s, + uint16_t domain_id, + uint32_t pasid) +{ +} + +static void vtd_piotlb_page_invalidate(IntelIOMMUState *s, uint16_t domain_id, + uint32_t pasid, hwaddr addr, uint8_t am, bool ih) +{ +} + +static bool vtd_process_piotlb_desc(IntelIOMMUState *s, + VTDInvDesc *inv_desc) +{ + uint16_t domain_id; + uint32_t pasid; + uint8_t am; + hwaddr addr; + + if ((inv_desc->val[0] & VTD_INV_DESC_PIOTLB_RSVD_VAL0) || + (inv_desc->val[1] & VTD_INV_DESC_PIOTLB_RSVD_VAL1)) { + error_report_once("non-zero-field-in-piotlb_inv_desc hi: 0x%" PRIx64 + " lo: 0x%" PRIx64, inv_desc->val[1], inv_desc->val[0]); + return false; + } + + domain_id = VTD_INV_DESC_PIOTLB_DID(inv_desc->val[0]); + pasid = VTD_INV_DESC_PIOTLB_PASID(inv_desc->val[0]); + switch (inv_desc->val[0] & VTD_INV_DESC_IOTLB_G) { + case VTD_INV_DESC_PIOTLB_ALL_IN_PASID: + vtd_piotlb_pasid_invalidate(s, domain_id, pasid); + break; + + case VTD_INV_DESC_PIOTLB_PSI_IN_PASID: + am = VTD_INV_DESC_PIOTLB_AM(inv_desc->val[1]); + addr = (hwaddr) VTD_INV_DESC_PIOTLB_ADDR(inv_desc->val[1]); + if (am > VTD_MAMV) { + error_report_once("Invalid am, > max am value, hi: 0x%" PRIx64 + " lo: 0x%" PRIx64, inv_desc->val[1], inv_desc->val[0]); + return false; + } + vtd_piotlb_page_invalidate(s, domain_id, pasid, + addr, am, VTD_INV_DESC_PIOTLB_IH(inv_desc->val[1])); + break; + + default: + error_report_once("Invalid granularity in P-IOTLB desc hi: 0x%" PRIx64 + " lo: 0x%" PRIx64, inv_desc->val[1], inv_desc->val[0]); + return false; + } + return true; +} + static bool vtd_process_inv_iec_desc(IntelIOMMUState *s, VTDInvDesc *inv_desc) { @@ -3248,6 +3301,10 @@ static bool vtd_process_inv_desc(IntelIOMMUState *s) break; case VTD_INV_DESC_PIOTLB: + trace_vtd_inv_desc("p-iotlb", inv_desc.val[1], inv_desc.val[0]); + if (!vtd_process_piotlb_desc(s, &inv_desc)) { + return false; + } break; case VTD_INV_DESC_WAIT: diff --git a/hw/i386/intel_iommu_internal.h b/hw/i386/intel_iommu_internal.h index 6f32d7b..314e2c4 100644 --- a/hw/i386/intel_iommu_internal.h +++ b/hw/i386/intel_iommu_internal.h @@ -457,6 +457,19 @@ typedef union VTDInvDesc VTDInvDesc; #define VTD_INV_DESC_PASIDC_PASID_SI (1ULL << 4) #define VTD_INV_DESC_PASIDC_GLOBAL (3ULL << 4) +#define VTD_INV_DESC_PIOTLB_ALL_IN_PASID (2ULL << 4) +#define VTD_INV_DESC_PIOTLB_PSI_IN_PASID (3ULL << 4) + +#define VTD_INV_DESC_PIOTLB_RSVD_VAL0 0xfff000000000ffc0ULL +#define VTD_INV_DESC_PIOTLB_RSVD_VAL1 0xf80ULL + +#define VTD_INV_DESC_PIOTLB_PASID(val) (((val) >> 32) & 0xfffffULL) +#define VTD_INV_DESC_PIOTLB_DID(val) (((val) >> 16) & \ + VTD_DOMAIN_ID_MASK) +#define VTD_INV_DESC_PIOTLB_ADDR(val) ((val) & ~0xfffULL) +#define VTD_INV_DESC_PIOTLB_AM(val) ((val) & 0x3fULL) +#define VTD_INV_DESC_PIOTLB_IH(val) (((val) >> 6) & 0x1) + /* Information about page-selective IOTLB invalidate */ struct VTDIOTLBPageInvInfo { uint16_t domain_id;
This patch adds the basic PASID-based iotlb (piotlb) invalidation support. piotlb is used during walking Intel VT-d 1st level page table. This patch only adds the basic processing. Detailed handling will be added in next patch. Cc: Kevin Tian <kevin.tian@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Yi Sun <yi.y.sun@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> --- hw/i386/intel_iommu.c | 57 ++++++++++++++++++++++++++++++++++++++++++ hw/i386/intel_iommu_internal.h | 13 ++++++++++ 2 files changed, 70 insertions(+)