| Message ID | 20200327130005.20340-1-m.szyprowski@samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [v2,1/4] ARM: dts: exynos: Enable WLAN support for the UniversalC210 board | expand |
On Fri, Mar 27, 2020 at 02:00:05PM +0100, Marek Szyprowski wrote: > Add a node for BCM4330/2 SDIO chip on SDHCI bus #3 and the required MMC > power sequence node for the Exynos4210-based UniversalC210 board. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > .../boot/dts/exynos4210-universal_c210.dts | 28 +++++++++++++++++++ Thanks, applied. Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 9dda6bdb9253..c78423a2d10f 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -50,6 +50,11 @@ enable-active-high; }; + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>; + }; + gpio-keys { compatible = "gpio-keys"; @@ -563,6 +568,29 @@ status = "okay"; }; +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&ldo5_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac"; + reg = <1>; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + &serial_0 { status = "okay"; /delete-property/dmas;
Add a node for BCM4330/2 SDIO chip on SDHCI bus #3 and the required MMC power sequence node for the Exynos4210-based UniversalC210 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- .../boot/dts/exynos4210-universal_c210.dts | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+)