diff mbox series

block: all zones zone management operations

Message ID 20200326043012.600187-1-damien.lemoal@wdc.com (mailing list archive)
State Changes Requested
Headers show
Series block: all zones zone management operations | expand

Commit Message

Damien Le Moal March 26, 2020, 4:30 a.m. UTC
Similarly to the zone write pointer reset operation (REQ_OP_ZONE_RESET),
the zone open, close and finish operations can operate on all zones of a
ZBC or ZAC SMR disk by setting the all bit of the command. Compared to a
loop issuing a request for every zone of the device, the device based
processing of an all zone operation is several orders of magnitude
faster.

While resetting all zones of a device was already supported with
REQ_OP_ZONE_RESET_ALL, a similar implementation for the open, close and
finish operations would introduce 3 more request types and complicate
the code. To avoid this, the REQ_ALL_ZONES request flag is introduced to
indicate that a zone management operation request (REQ_OP_ZONE_RESET,
REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE or REQ_OP_ZONE_FINISH) must operate
on all zones of the target device. This allows removing entirely the
special processing for REQ_OP_ZONE_RESET_ALL.

Since an all zone management operation can only be executed if the
block device represents a physical device, the request queue flag
QUEUE_FLAG_ZONE_RESETALLi is renamed as QUEUE_FLAG_ALL_ZONES_MGMT to
allow device drivers to indicate that the device can accept all zones
zone management requests.

THe scsi sd_zbc code is modified accordingly to allow setting the
all bit in ZBC_OUT commands. The null_blk driver is also modified to
add processing for the open all, close all and finish all operations.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 block/blk-core.c               |   5 -
 block/blk-zoned.c              |  34 +++----
 drivers/block/null_blk_main.c  |   2 +-
 drivers/block/null_blk_zoned.c | 162 +++++++++++++++++++++++++--------
 drivers/scsi/sd.c              |  13 +--
 drivers/scsi/sd.h              |   5 +-
 drivers/scsi/sd_zbc.c          |  10 +-
 include/linux/blk_types.h      |  14 +--
 include/linux/blkdev.h         |   6 +-
 9 files changed, 162 insertions(+), 89 deletions(-)

Comments

Christoph Hellwig March 26, 2020, 7:28 a.m. UTC | #1
On Thu, Mar 26, 2020 at 01:30:12PM +0900, Damien Le Moal wrote:
> Similarly to the zone write pointer reset operation (REQ_OP_ZONE_RESET),
> the zone open, close and finish operations can operate on all zones of a
> ZBC or ZAC SMR disk by setting the all bit of the command. Compared to a
> loop issuing a request for every zone of the device, the device based
> processing of an all zone operation is several orders of magnitude
> faster.

What is the point?  None of these actually seem like remotely useful
operations.  Why would I ever want to open or finish all zones?
Damien Le Moal March 26, 2020, 8:23 a.m. UTC | #2
On 2020/03/26 16:28, Christoph Hellwig wrote:
> On Thu, Mar 26, 2020 at 01:30:12PM +0900, Damien Le Moal wrote:
>> Similarly to the zone write pointer reset operation (REQ_OP_ZONE_RESET),
>> the zone open, close and finish operations can operate on all zones of a
>> ZBC or ZAC SMR disk by setting the all bit of the command. Compared to a
>> loop issuing a request for every zone of the device, the device based
>> processing of an all zone operation is several orders of magnitude
>> faster.
> 
> What is the point?  None of these actually seem like remotely useful
> operations.  Why would I ever want to open or finish all zones?
> 

Open & Close all zones are indeed not super useful, at least on SMR drives. But
finishing all zones does have some benefit, namely the ability to quickly change
all incompletely written zones into "read-only" full zones. For drives with low
zone resources (open or active zones), this can be useful to recover zone
resources. Again, not so much on SMR drives, but this could come in handy for
ZNS drives with low zone resources (max open zones etc).
Christoph Hellwig March 26, 2020, 9:30 a.m. UTC | #3
On Thu, Mar 26, 2020 at 08:23:34AM +0000, Damien Le Moal wrote:
> Open & Close all zones are indeed not super useful, at least on SMR drives. But
> finishing all zones does have some benefit, namely the ability to quickly change
> all incompletely written zones into "read-only" full zones. For drives with low
> zone resources (open or active zones), this can be useful to recover zone
> resources. Again, not so much on SMR drives, but this could come in handy for
> ZNS drives with low zone resources (max open zones etc).

What quantifies the "some benefit"?  If you have an application that
micro-manages the zone state it better knows what zones are open.  But
even if we want to add a finish all I'd rather wait for ZNS support
to land and real use cases, as it sounds all rather dubious.
Damien Le Moal March 28, 2020, 8:13 a.m. UTC | #4
On 2020/03/26 18:30, hch@infradead.org wrote:
> On Thu, Mar 26, 2020 at 08:23:34AM +0000, Damien Le Moal wrote:
>> Open & Close all zones are indeed not super useful, at least on SMR drives. But
>> finishing all zones does have some benefit, namely the ability to quickly change
>> all incompletely written zones into "read-only" full zones. For drives with low
>> zone resources (open or active zones), this can be useful to recover zone
>> resources. Again, not so much on SMR drives, but this could come in handy for
>> ZNS drives with low zone resources (max open zones etc).
> 
> What quantifies the "some benefit"?  If you have an application that
> micro-manages the zone state it better knows what zones are open.  But
> even if we want to add a finish all I'd rather wait for ZNS support
> to land and real use cases, as it sounds all rather dubious.

OK. Sure, we can delay this until ZNS. The use case are indeed not super clear yet.

In any case, I think that the patch has value as a nice cleanup of the reset vs
reset all request operations (the latter going away). The side effect of it
being that open/close/finish all come for free with it. I would like to get it
in just for this nice cleanup.
Christoph Hellwig March 28, 2020, 8:22 a.m. UTC | #5
On Sat, Mar 28, 2020 at 08:13:26AM +0000, Damien Le Moal wrote:
> In any case, I think that the patch has value as a nice cleanup of the reset vs
> reset all request operations (the latter going away). The side effect of it
> being that open/close/finish all come for free with it. I would like to get it
> in just for this nice cleanup.

Well, this keeps about the same amount of core code (and I'm not sure
it really is cleaner) while adding significantly more code in sd and
null_blk.  Not my classic definition of a cleanup.
Damien Le Moal March 28, 2020, 8:27 a.m. UTC | #6
On 2020/03/28 17:22, hch@infradead.org wrote:
> On Sat, Mar 28, 2020 at 08:13:26AM +0000, Damien Le Moal wrote:
>> In any case, I think that the patch has value as a nice cleanup of the reset vs
>> reset all request operations (the latter going away). The side effect of it
>> being that open/close/finish all come for free with it. I would like to get it
>> in just for this nice cleanup.
> 
> Well, this keeps about the same amount of core code (and I'm not sure
> it really is cleaner) while adding significantly more code in sd and
> null_blk.  Not my classic definition of a cleanup.

sd is simplified (one less argument for setup of zone mgmt commands). But yes,
agreed that null_blk does need more code.

OK. Let's drop this for now then.
Christoph Hellwig March 28, 2020, 8:31 a.m. UTC | #7
On Sat, Mar 28, 2020 at 08:27:09AM +0000, Damien Le Moal wrote:
> On 2020/03/28 17:22, hch@infradead.org wrote:
> > On Sat, Mar 28, 2020 at 08:13:26AM +0000, Damien Le Moal wrote:
> >> In any case, I think that the patch has value as a nice cleanup of the reset vs
> >> reset all request operations (the latter going away). The side effect of it
> >> being that open/close/finish all come for free with it. I would like to get it
> >> in just for this nice cleanup.
> > 
> > Well, this keeps about the same amount of core code (and I'm not sure
> > it really is cleaner) while adding significantly more code in sd and
> > null_blk.  Not my classic definition of a cleanup.
> 
> sd is simplified (one less argument for setup of zone mgmt commands). But yes,
> agreed that null_blk does need more code.
> 
> OK. Let's drop this for now then.

FYI, if you think the flag is cleaner than a new op you could resubmit
this but keep the flag reset specific for now.  That won't require new
code in null_blk for a use cases no callers uses anyway.
Damien Le Moal March 28, 2020, 8:37 a.m. UTC | #8
On 2020/03/28 17:31, hch@infradead.org wrote:
> On Sat, Mar 28, 2020 at 08:27:09AM +0000, Damien Le Moal wrote:
>> On 2020/03/28 17:22, hch@infradead.org wrote:
>>> On Sat, Mar 28, 2020 at 08:13:26AM +0000, Damien Le Moal wrote:
>>>> In any case, I think that the patch has value as a nice cleanup of the reset vs
>>>> reset all request operations (the latter going away). The side effect of it
>>>> being that open/close/finish all come for free with it. I would like to get it
>>>> in just for this nice cleanup.
>>>
>>> Well, this keeps about the same amount of core code (and I'm not sure
>>> it really is cleaner) while adding significantly more code in sd and
>>> null_blk.  Not my classic definition of a cleanup.
>>
>> sd is simplified (one less argument for setup of zone mgmt commands). But yes,
>> agreed that null_blk does need more code.
>>
>> OK. Let's drop this for now then.
> 
> FYI, if you think the flag is cleaner than a new op you could resubmit
> this but keep the flag reset specific for now.  That won't require new
> code in null_blk for a use cases no callers uses anyway.

OK. I can do that.
diff mbox series

Patch

diff --git a/block/blk-core.c b/block/blk-core.c
index 60dc9552ef8d..ef0c437e8f43 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -131,7 +131,6 @@  static const char *const blk_op_name[] = {
 	REQ_OP_NAME(DISCARD),
 	REQ_OP_NAME(SECURE_ERASE),
 	REQ_OP_NAME(ZONE_RESET),
-	REQ_OP_NAME(ZONE_RESET_ALL),
 	REQ_OP_NAME(ZONE_OPEN),
 	REQ_OP_NAME(ZONE_CLOSE),
 	REQ_OP_NAME(ZONE_FINISH),
@@ -944,10 +943,6 @@  generic_make_request_checks(struct bio *bio)
 		if (!blk_queue_is_zoned(q))
 			goto not_supported;
 		break;
-	case REQ_OP_ZONE_RESET_ALL:
-		if (!blk_queue_is_zoned(q) || !blk_queue_zone_resetall(q))
-			goto not_supported;
-		break;
 	case REQ_OP_WRITE_ZEROES:
 		if (!q->limits.max_write_zeroes_sectors)
 			goto not_supported;
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 05741c6f618b..c0b883ed5fdf 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -123,16 +123,16 @@  int blkdev_report_zones(struct block_device *bdev, sector_t sector,
 }
 EXPORT_SYMBOL_GPL(blkdev_report_zones);
 
-static inline bool blkdev_allow_reset_all_zones(struct block_device *bdev,
-						sector_t sector,
-						sector_t nr_sectors)
+static inline bool blkdev_do_all_zones_mgmt(struct block_device *bdev,
+					    sector_t sector,
+					    sector_t nr_sectors)
 {
-	if (!blk_queue_zone_resetall(bdev_get_queue(bdev)))
+	if (!blk_queue_all_zones_mgmt(bdev_get_queue(bdev)))
 		return false;
 
 	/*
-	 * REQ_OP_ZONE_RESET_ALL can be executed only if the number of sectors
-	 * of the applicable zone range is the entire disk.
+	 * Zone management operations can be executed on all zones only if the
+	 * number of sectors of the applicable zone range is the entire disk.
 	 */
 	return !sector && nr_sectors == get_capacity(bdev->bd_disk);
 }
@@ -162,6 +162,7 @@  int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 	sector_t capacity = get_capacity(bdev->bd_disk);
 	sector_t end_sector = sector + nr_sectors;
 	struct bio *bio = NULL;
+	bool all_zones_mgmt;
 	int ret;
 
 	if (!blk_queue_is_zoned(q))
@@ -184,22 +185,21 @@  int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 	if ((nr_sectors & (zone_sectors - 1)) && end_sector != capacity)
 		return -EINVAL;
 
-	while (sector < end_sector) {
-		bio = blk_next_bio(bio, 0, gfp_mask);
-		bio_set_dev(bio, bdev);
+	all_zones_mgmt = blkdev_do_all_zones_mgmt(bdev, sector, nr_sectors);
 
+	while (sector < end_sector) {
 		/*
-		 * Special case for the zone reset operation that reset all
-		 * zones, this is useful for applications like mkfs.
+		 * There is no point in retrying failed zone management
+		 * requests so fail them fast.
 		 */
-		if (op == REQ_OP_ZONE_RESET &&
-		    blkdev_allow_reset_all_zones(bdev, sector, nr_sectors)) {
-			bio->bi_opf = REQ_OP_ZONE_RESET_ALL;
+		bio = blk_next_bio(bio, 0, gfp_mask);
+		bio_set_dev(bio, bdev);
+		bio->bi_opf = op | REQ_SYNC | REQ_FAILFAST_DEV;
+		bio->bi_iter.bi_sector = sector;
+		if (all_zones_mgmt) {
+			bio->bi_opf |= REQ_ALL_ZONES;
 			break;
 		}
-
-		bio->bi_opf = op | REQ_SYNC;
-		bio->bi_iter.bi_sector = sector;
 		sector += zone_sectors;
 
 		/* This may take a while, so be nice to others */
diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 133060431dbd..6665f905169a 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1746,7 +1746,7 @@  static int null_add_dev(struct nullb_device *dev)
 			goto out_cleanup_blk_queue;
 
 		nullb->q->limits.zoned = BLK_ZONED_HM;
-		blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, nullb->q);
+		blk_queue_flag_set(QUEUE_FLAG_ALL_ZONES_MGMT, nullb->q);
 		blk_queue_required_elevator_features(nullb->q,
 						ELEVATOR_F_ZBD_SEQ_WRITE);
 	}
diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c
index ed34785dd64b..43b01d58d366 100644
--- a/drivers/block/null_blk_zoned.c
+++ b/drivers/block/null_blk_zoned.c
@@ -151,59 +151,142 @@  static blk_status_t null_zone_write(struct nullb_cmd *cmd, sector_t sector,
 	return BLK_STS_OK;
 }
 
+static inline void __null_zone_reset(struct blk_zone *zone)
+{
+	zone->cond = BLK_ZONE_COND_EMPTY;
+	zone->wp = zone->start;
+}
+
+static blk_status_t null_zone_reset(struct nullb_device *dev,
+				    struct blk_zone *zone, bool all)
+{
+	if (all) {
+		int i;
+
+		/* Reset all sequential zones */
+		for (i = dev->zone_nr_conv; i < dev->nr_zones; i++)
+			__null_zone_reset(&zone[i]);
+		return BLK_STS_OK;
+	}
+
+	__null_zone_reset(zone);
+
+	return BLK_STS_OK;
+}
+
+static inline void __null_zone_open(struct blk_zone *zone)
+{
+	zone->cond = BLK_ZONE_COND_EXP_OPEN;
+}
+
+static blk_status_t null_zone_open(struct nullb_device *dev,
+				   struct blk_zone *zone, bool all)
+{
+	if (all) {
+		int i;
+
+		/* Explicitly open all non-full zones */
+		for (i = dev->zone_nr_conv; i < dev->nr_zones; i++) {
+			if (zone->cond != BLK_ZONE_COND_FULL)
+				__null_zone_open(&zone[i]);
+		}
+		return BLK_STS_OK;
+	}
+
+	if (zone->cond == BLK_ZONE_COND_FULL)
+		return BLK_STS_IOERR;
+
+	__null_zone_open(zone);
+
+	return BLK_STS_OK;
+}
+
+static inline void __null_zone_close(struct blk_zone *zone)
+{
+	if (zone->wp == zone->start)
+		zone->cond = BLK_ZONE_COND_EMPTY;
+	else
+		zone->cond = BLK_ZONE_COND_CLOSED;
+}
+
+static blk_status_t null_zone_close(struct nullb_device *dev,
+				    struct blk_zone *zone, bool all)
+{
+	if (all) {
+		int i;
+
+		/* Close all non-full zones */
+		for (i = dev->zone_nr_conv; i < dev->nr_zones; i++) {
+			if (zone->cond != BLK_ZONE_COND_FULL)
+				__null_zone_close(&zone[i]);
+		}
+		return BLK_STS_OK;
+	}
+
+	if (zone->cond == BLK_ZONE_COND_FULL)
+		return BLK_STS_IOERR;
+
+	__null_zone_close(zone);
+
+	return BLK_STS_OK;
+}
+
+static inline void __null_zone_finish(struct blk_zone *zone)
+{
+	zone->cond = BLK_ZONE_COND_FULL;
+	zone->wp = zone->start + zone->len;
+}
+
+static blk_status_t null_zone_finish(struct nullb_device *dev,
+				     struct blk_zone *zone, bool all)
+{
+	if (all) {
+		int i;
+
+		/* Finish all open (implicit and explicit) and closed zones */
+		for (i = dev->zone_nr_conv; i < dev->nr_zones; i++) {
+			if (zone->cond != BLK_ZONE_COND_EMPTY)
+				__null_zone_finish(&zone[i]);
+		}
+		return BLK_STS_OK;
+	}
+
+	__null_zone_finish(zone);
+
+	return BLK_STS_OK;
+}
+
 static blk_status_t null_zone_mgmt(struct nullb_cmd *cmd, enum req_opf op,
 				   sector_t sector)
 {
 	struct nullb_device *dev = cmd->nq->dev;
 	struct blk_zone *zone = &dev->zones[null_zone_no(dev, sector)];
-	size_t i;
+	bool all;
+
+	if (cmd->bio)
+		all = cmd->bio->bi_opf & REQ_ALL_ZONES;
+	else
+		all = cmd->rq->cmd_flags & REQ_ALL_ZONES;
+
+	/*
+	 * Conventional zones are ignored for an all zones management operation
+	 * but they cannot be targeted for a single zone operation.
+	 */
+	if (!all && zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
+		return BLK_STS_IOERR;
 
 	switch (op) {
-	case REQ_OP_ZONE_RESET_ALL:
-		for (i = 0; i < dev->nr_zones; i++) {
-			if (zone[i].type == BLK_ZONE_TYPE_CONVENTIONAL)
-				continue;
-			zone[i].cond = BLK_ZONE_COND_EMPTY;
-			zone[i].wp = zone[i].start;
-		}
-		break;
 	case REQ_OP_ZONE_RESET:
-		if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
-			return BLK_STS_IOERR;
-
-		zone->cond = BLK_ZONE_COND_EMPTY;
-		zone->wp = zone->start;
-		break;
+		return null_zone_reset(dev, zone, all);
 	case REQ_OP_ZONE_OPEN:
-		if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
-			return BLK_STS_IOERR;
-		if (zone->cond == BLK_ZONE_COND_FULL)
-			return BLK_STS_IOERR;
-
-		zone->cond = BLK_ZONE_COND_EXP_OPEN;
-		break;
+		return null_zone_open(dev, zone, all);
 	case REQ_OP_ZONE_CLOSE:
-		if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
-			return BLK_STS_IOERR;
-		if (zone->cond == BLK_ZONE_COND_FULL)
-			return BLK_STS_IOERR;
-
-		if (zone->wp == zone->start)
-			zone->cond = BLK_ZONE_COND_EMPTY;
-		else
-			zone->cond = BLK_ZONE_COND_CLOSED;
-		break;
+		return null_zone_close(dev, zone, all);
 	case REQ_OP_ZONE_FINISH:
-		if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
-			return BLK_STS_IOERR;
-
-		zone->cond = BLK_ZONE_COND_FULL;
-		zone->wp = zone->start + zone->len;
-		break;
+		return null_zone_finish(dev, zone, all);
 	default:
 		return BLK_STS_NOTSUPP;
 	}
-	return BLK_STS_OK;
 }
 
 blk_status_t null_handle_zoned(struct nullb_cmd *cmd, enum req_opf op,
@@ -213,7 +296,6 @@  blk_status_t null_handle_zoned(struct nullb_cmd *cmd, enum req_opf op,
 	case REQ_OP_WRITE:
 		return null_zone_write(cmd, sector, nr_sectors);
 	case REQ_OP_ZONE_RESET:
-	case REQ_OP_ZONE_RESET_ALL:
 	case REQ_OP_ZONE_OPEN:
 	case REQ_OP_ZONE_CLOSE:
 	case REQ_OP_ZONE_FINISH:
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 8ca9299ffd36..9fc4ebd64752 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1289,17 +1289,13 @@  static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 	case REQ_OP_WRITE:
 		return sd_setup_read_write_cmnd(cmd);
 	case REQ_OP_ZONE_RESET:
-		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER,
-						   false);
-	case REQ_OP_ZONE_RESET_ALL:
-		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER,
-						   true);
+		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER);
 	case REQ_OP_ZONE_OPEN:
-		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_OPEN_ZONE, false);
+		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_OPEN_ZONE);
 	case REQ_OP_ZONE_CLOSE:
-		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_CLOSE_ZONE, false);
+		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_CLOSE_ZONE);
 	case REQ_OP_ZONE_FINISH:
-		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_FINISH_ZONE, false);
+		return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_FINISH_ZONE);
 	default:
 		WARN_ON_ONCE(1);
 		return BLK_STS_NOTSUPP;
@@ -1964,7 +1960,6 @@  static int sd_done(struct scsi_cmnd *SCpnt)
 	case REQ_OP_WRITE_ZEROES:
 	case REQ_OP_WRITE_SAME:
 	case REQ_OP_ZONE_RESET:
-	case REQ_OP_ZONE_RESET_ALL:
 	case REQ_OP_ZONE_OPEN:
 	case REQ_OP_ZONE_CLOSE:
 	case REQ_OP_ZONE_FINISH:
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 50fff0bf8c8e..17bca569f68d 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -210,7 +210,7 @@  static inline int sd_is_zoned(struct scsi_disk *sdkp)
 extern int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
 extern void sd_zbc_print_zones(struct scsi_disk *sdkp);
 blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
-					 unsigned char op, bool all);
+					 unsigned char op);
 extern void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 			    struct scsi_sense_hdr *sshdr);
 int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
@@ -227,8 +227,7 @@  static inline int sd_zbc_read_zones(struct scsi_disk *sdkp,
 static inline void sd_zbc_print_zones(struct scsi_disk *sdkp) {}
 
 static inline blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
-						       unsigned char op,
-						       bool all)
+						       unsigned char op)
 {
 	return BLK_STS_TARGET;
 }
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index f45c22b09726..23099d37f78e 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -214,18 +214,18 @@  int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
  *			can be RESET WRITE POINTER, OPEN, CLOSE or FINISH.
  * @cmd: the command to setup
  * @op: Operation to be performed
- * @all: All zones control
  *
- * Called from sd_init_command() for REQ_OP_ZONE_RESET, REQ_OP_ZONE_RESET_ALL,
- * REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE or REQ_OP_ZONE_FINISH requests.
+ * Called from sd_init_command() for REQ_OP_ZONE_RESET, REQ_OP_ZONE_OPEN,
+ * REQ_OP_ZONE_CLOSE or REQ_OP_ZONE_FINISH requests.
  */
 blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
-					 unsigned char op, bool all)
+					 unsigned char op)
 {
 	struct request *rq = cmd->request;
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
 	sector_t sector = blk_rq_pos(rq);
 	sector_t block = sectors_to_logical(sdkp->device, sector);
+	bool all = rq->cmd_flags & REQ_ALL_ZONES;
 
 	if (!sd_is_zoned(sdkp))
 		/* Not a zoned device */
@@ -407,7 +407,7 @@  int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
 		goto err;
 
 	/* The drive satisfies the kernel restrictions: set it up */
-	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, sdkp->disk->queue);
+	blk_queue_flag_set(QUEUE_FLAG_ALL_ZONES_MGMT, sdkp->disk->queue);
 	blk_queue_required_elevator_features(sdkp->disk->queue,
 					     ELEVATOR_F_ZBD_SEQ_WRITE);
 	nr_zones = round_up(sdkp->capacity, zone_blocks) >> ilog2(zone_blocks);
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 70254ae11769..48a464724500 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -286,8 +286,6 @@  enum req_opf {
 	REQ_OP_ZONE_RESET	= 6,
 	/* write the same sector many times */
 	REQ_OP_WRITE_SAME	= 7,
-	/* reset all the zone present on the device */
-	REQ_OP_ZONE_RESET_ALL	= 8,
 	/* write the zero filled sector many times */
 	REQ_OP_WRITE_ZEROES	= 9,
 	/* Open a zone */
@@ -338,6 +336,12 @@  enum req_flag_bits {
 
 	__REQ_HIPRI,
 
+	/*
+	 * For REQ_OP_ZONE_[RESET|OPEN|CLOSE|FINISH]: tell the driver that
+	 * the request operation must target all zones.
+	 */
+	__REQ_ALL_ZONES,
+
 	/* for driver use */
 	__REQ_DRV,
 	__REQ_SWAP,		/* swapping request. */
@@ -363,6 +367,7 @@  enum req_flag_bits {
 
 #define REQ_NOUNMAP		(1ULL << __REQ_NOUNMAP)
 #define REQ_HIPRI		(1ULL << __REQ_HIPRI)
+#define REQ_ALL_ZONES		(1ULL << __REQ_ALL_ZONES)
 
 #define REQ_DRV			(1ULL << __REQ_DRV)
 #define REQ_SWAP		(1ULL << __REQ_SWAP)
@@ -425,10 +430,7 @@  static inline bool op_is_discard(unsigned int op)
 }
 
 /*
- * Check if a bio or request operation is a zone management operation, with
- * the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
- * due to its different handling in the block layer and device response in
- * case of command failure.
+ * Check if a bio or request operation is a zone management operation.
  */
 static inline bool op_is_zone_mgmt(enum req_opf op)
 {
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index f629d40c645c..3ef3bd6df579 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -610,7 +610,7 @@  struct request_queue {
 #define QUEUE_FLAG_SCSI_PASSTHROUGH 23	/* queue supports SCSI commands */
 #define QUEUE_FLAG_QUIESCED	24	/* queue has been quiesced */
 #define QUEUE_FLAG_PCI_P2PDMA	25	/* device supports PCI p2p requests */
-#define QUEUE_FLAG_ZONE_RESETALL 26	/* supports Zone Reset All */
+#define QUEUE_FLAG_ALL_ZONES_MGMT 26	/* device supports all zones zone mgmt */
 #define QUEUE_FLAG_RQ_ALLOC_TIME 27	/* record rq->alloc_time_ns */
 
 #define QUEUE_FLAG_MQ_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
@@ -631,8 +631,8 @@  bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
 #define blk_queue_io_stat(q)	test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
 #define blk_queue_add_random(q)	test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
 #define blk_queue_discard(q)	test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
-#define blk_queue_zone_resetall(q)	\
-	test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
+#define blk_queue_all_zones_mgmt(q)	\
+	test_bit(QUEUE_FLAG_ALL_ZONES_MGMT, &(q)->queue_flags)
 #define blk_queue_secure_erase(q) \
 	(test_bit(QUEUE_FLAG_SECERASE, &(q)->queue_flags))
 #define blk_queue_dax(q)	test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags)