Message ID | 20200330113542.181752-6-adrian.ratiu@collabora.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Genericize DW MIPI DSI bridge and add i.MX 6 driver | expand |
On Mon, Mar 30, 2020 at 8:35 AM Adrian Ratiu <adrian.ratiu@collabora.com> wrote: > + panel@0 { > + compatible = "sharp,ls032b3sx01"; > + reg = <0>; > + reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; > + ports { > + port@0 { There is a unit address here without a corresponding reg property. This gives warning with 'make dt_binding_check'
On Mon, 30 Mar 2020 14:35:42 +0300, Adrian Ratiu wrote: > This provides an example DT binding for the MIPI DSI host controller > present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP. > > Cc: Rob Herring <robh@kernel.org> > Cc: Neil Armstrong <narmstrong@baylibre.com> > Cc: devicetree@vger.kernel.org > Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.com> > Signed-off-by: Martyn Welch <martyn.welch@collabora.com> > Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> > --- > Changes since v4: > - Fixed yaml binding to pass `make dt_binding_check dtbs_check` > and addressed received binding feedback (Rob) > > Changes since v3: > - Added commit message (Neil) > - Converted to yaml format (Neil) > - Minor dt node + driver fixes (Rob) > - Added small panel example to the host controller binding > > Changes since v2: > - Fixed commit tags (Emil) > --- > .../display/imx/fsl,mipi-dsi-imx6.yaml | 134 ++++++++++++++++++ > 1 file changed, 134 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:34.21-31: Warning (reg_format): /example-0/dsi@21e0000/ports/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:33.24-38.19: Warning (avoid_default_addr_size): /example-0/dsi@21e0000/ports/port@1: Relying on default #address-cells value Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:33.24-38.19: Warning (avoid_default_addr_size): /example-0/dsi@21e0000/ports/port@1: Relying on default #size-cells value Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:33.24-38.19: Warning (graph_port): /example-0/dsi@21e0000/ports/port@1: graph node '#address-cells' is -1, must be 1 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:33.24-38.19: Warning (graph_port): /example-0/dsi@21e0000/ports/port@1: graph node '#size-cells' is -1, must be 0 See https://patchwork.ozlabs.org/patch/1263893 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml new file mode 100644 index 000000000000..59146df11510 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,mipi-dsi-imx6.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 DW MIPI DSI Host Controller + +maintainers: + - Adrian Ratiu <adrian.ratiu@collabora.com> + +description: | + The i.MX6 DSI host controller is a Synopsys DesignWare MIPI DSI v1.01 + IP block with a companion PHY IP. + + These DT bindings follow the Synopsys DW MIPI DSI bindings defined in + Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt with + the following device-specific properties. + +properties: + compatible: + items: + - const: fsl,imx6q-mipi-dsi + - const: snps,dw-mipi-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Module Clock + - description: DSI bus clock + + clock-names: + items: + - const: ref + - const: pclk + + fsl,gpr: + description: Phandle to the iomuxc-gpr region containing the multiplexer control register. + $ref: /schemas/types.yaml#/definitions/phandle + + ports: + type: object + description: | + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + properties: + port@0: + type: object + description: + DSI input port node, connected to the ltdc rgb output port. + + port@1: + type: object + description: + DSI output port node, connected to a panel or a bridge input port" + +patternProperties: + "^panel@[0-3]$": + type: object + description: | + A node containing the panel or bridge description as documented in + Documentation/devicetree/bindings/display/mipi-dsi-bus.txt + properties: + port: + type: object + description: + Panel or bridge port node, connected to the DSI output port (port@1) + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - |+ + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/gpio/gpio.h> + + dsi: dsi@21e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x021e0000 0x4000>; + interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; + fsl,gpr = <&gpr>; + clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>, + <&clks IMX6QDL_CLK_MIPI_IPG>; + clock-names = "ref", "pclk"; + + ports { + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel@0 { + compatible = "sharp,ls032b3sx01"; + reg = <0>; + reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; + ports { + port@0 { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + }; + +...