diff mbox series

[13/13] dt-bindings: usb: amlogic,dwc3: remove old DWC3 wrapper

Message ID 20200324102030.31000-14-narmstrong@baylibre.com (mailing list archive)
State Superseded
Headers show
Series usb: dwc3: meson: add OTG support for GXL/GXM | expand

Commit Message

Neil Armstrong March 24, 2020, 10:20 a.m. UTC
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

There is now an updated bindings for these SoCs making the old
compatible obsolete.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/usb/amlogic,dwc3.txt  | 42 -------------------
 1 file changed, 42 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/usb/amlogic,dwc3.txt

Comments

Rob Herring (Arm) March 31, 2020, 7:58 p.m. UTC | #1
On Tue, 24 Mar 2020 11:20:30 +0100, Neil Armstrong wrote:
> From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> 
> There is now an updated bindings for these SoCs making the old
> compatible obsolete.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/usb/amlogic,dwc3.txt  | 42 -------------------
>  1 file changed, 42 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
deleted file mode 100644
index 9a8b631904fd..000000000000
--- a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
+++ /dev/null
@@ -1,42 +0,0 @@ 
-Amlogic Meson GX DWC3 USB SoC controller
-
-Required properties:
-- compatible:	depending on the SoC this should contain one of:
-			* amlogic,meson-axg-dwc3
-			* amlogic,meson-gxl-dwc3
-- clocks:	a handle for the "USB general" clock
-- clock-names:	must be "usb_general"
-- resets:	a handle for the shared "USB OTG" reset line
-- reset-names:	must be "usb_otg"
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-PHY documentation is provided in the following places:
-- Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt
-- Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt
-
-Example device nodes:
-		usb0: usb@ff500000 {
-			compatible = "amlogic,meson-axg-dwc3";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			clocks = <&clkc CLKID_USB>;
-			clock-names = "usb_general";
-			resets = <&reset RESET_USB_OTG>;
-			reset-names = "usb_otg";
-
-			dwc3: dwc3@ff500000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0xff500000 0x0 0x100000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				dr_mode = "host";
-				maximum-speed = "high-speed";
-				snps,dis_u2_susphy_quirk;
-				phys = <&usb3_phy>, <&usb2_phy0>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};