diff mbox series

[v5,2/4] thermal: k3: Add support for bandgap sensors

Message ID 20200331075356.19171-3-j-keerthy@ti.com (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series thermal: k3: Add support for bandgap sensors | expand

Commit Message

J, KEERTHY March 31, 2020, 7:53 a.m. UTC
The bandgap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.

Currently reading temperatures only is supported.
There are no active/passive cooling agent supported.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---

Changes in v5:

  * Removed thermal work function which was unused.
  * Removed unused preve_tenmp and a couple more struct variables.
  * Removed couple of redundant header function include.

 drivers/thermal/Kconfig      |  10 ++
 drivers/thermal/Makefile     |   1 +
 drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++
 3 files changed, 279 insertions(+)
 create mode 100644 drivers/thermal/k3_bandgap.c

Comments

J, KEERTHY April 6, 2020, 3:11 a.m. UTC | #1
On 3/31/2020 1:23 PM, Keerthy wrote:
> The bandgap provides current and voltage reference for its internal
> circuits and other analog IP blocks. The analog-to-digital
> converter (ADC) produces an output value that is proportional
> to the silicon temperature.
> 
> Currently reading temperatures only is supported.
> There are no active/passive cooling agent supported.

Daniel,

Let me kow if there are further comments to be addressed.

Regards,
Keerthy

> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
> 
> Changes in v5:
> 
>    * Removed thermal work function which was unused.
>    * Removed unused preve_tenmp and a couple more struct variables.
>    * Removed couple of redundant header function include.
> 
>   drivers/thermal/Kconfig      |  10 ++
>   drivers/thermal/Makefile     |   1 +
>   drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++
>   3 files changed, 279 insertions(+)
>   create mode 100644 drivers/thermal/k3_bandgap.c
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 5a05db5438d6..1df434527f8d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -251,6 +251,16 @@ config IMX_THERMAL
>   	  cpufreq is used as the cooling device to throttle CPUs when the
>   	  passive trip is crossed.
>   
> +config K3_THERMAL
> +	tristate "Texas Instruments K3 thermal support"
> +	depends on ARCH_K3 || COMPILE_TEST
> +	help
> +	  If you say yes here you get thermal support for the Texas Instruments
> +	  K3 SoC family. The current chip supported is:
> +	   - AM654
> +
> +	  This includes temperature reading functionality.
> +
>   config MAX77620_THERMAL
>   	tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
>   	depends on MFD_MAX77620
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 9fb88e26fb10..5ad6535139ae 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL)	+= clock_cooling.o
>   # devfreq cooling
>   thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
>   
> +obj-$(CONFIG_K3_THERMAL)	+= k3_bandgap.o
>   # platform thermal drivers
>   obj-y				+= broadcom/
>   obj-$(CONFIG_THERMAL_MMIO)		+= thermal_mmio.o
> diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
> new file mode 100644
> index 000000000000..1d976af4461a
> --- /dev/null
> +++ b/drivers/thermal/k3_bandgap.c
> @@ -0,0 +1,268 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI Bandgap temperature sensor driver for K3 SoC Family
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/err.h>
> +#include <linux/types.h>
> +#include <linux/of_platform.h>
> +#include <linux/io.h>
> +#include <linux/thermal.h>
> +#include <linux/of.h>
> +
> +#define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
> +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK	0xf
> +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
> +#define K3_VTM_TMPSENS0_CTRL_OFFSET	0x80
> +#define K3_VTM_REGS_PER_TS			0x10
> +#define K3_VTM_TS_STAT_DTEMP_MASK	0x3ff
> +#define K3_VTM_MAX_NUM_TS		8
> +#define K3_VTM_TMPSENS_CTRL_CBIASSEL	BIT(0)
> +#define K3_VTM_TMPSENS_CTRL_SOC		BIT(5)
> +#define K3_VTM_TMPSENS_CTRL_CLRZ		BIT(6)
> +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ	BIT(7)
> +
> +#define K3_VTM_ADC_BEGIN_VAL		540
> +#define K3_VTM_ADC_END_VAL		944
> +
> +static const int k3_adc_to_temp[] = {
> +	-40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
> +	-37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200,
> +	-33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600,
> +	-30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600,
> +	-26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000,
> +	-22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000,
> +	-18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400,
> +	-15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400,
> +	-11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400,
> +	-7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000,
> +	-2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400,
> +	1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600,
> +	7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000,
> +	11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400,
> +	15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400,
> +	19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800,
> +	24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800,
> +	28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900,
> +	32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200,
> +	36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200,
> +	40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600,
> +	45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600,
> +	49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600,
> +	53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000,
> +	57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000,
> +	61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000,
> +	65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000,
> +	69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400,
> +	73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400,
> +	77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400,
> +	81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400,
> +	85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400,
> +	89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400,
> +	93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500,
> +	98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400,
> +	101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000,
> +	105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600,
> +	109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200,
> +	112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800,
> +	116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400,
> +	119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
> +	123400, 123800, 124200, 124600, 124900, 125000,
> +};
> +
> +struct k3_bandgap {
> +	void __iomem *base;
> +	const struct k3_bandgap_data *conf;
> +};
> +
> +/* common data structures */
> +struct k3_thermal_data {
> +	struct thermal_zone_device *ti_thermal;
> +	struct k3_bandgap *bgp;
> +	int sensor_id;
> +	u32 ctrl_offset;
> +	u32 stat_offset;
> +};
> +
> +static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
> +				       unsigned int s2)
> +{
> +	int d01 = abs(s0 - s1);
> +	int d02 = abs(s0 - s2);
> +	int d12 = abs(s1 - s2);
> +
> +	if (d01 <= d02 && d01 <= d12)
> +		return (s0 + s1) / 2;
> +
> +	if (d02 <= d01 && d02 <= d12)
> +		return (s0 + s2) / 2;
> +
> +	return (s1 + s2) / 2;
> +}
> +
> +static int k3_bgp_read_temp(struct k3_thermal_data *devdata,
> +			    int *temp)
> +{
> +	struct k3_bandgap *bgp;
> +	unsigned int dtemp, s0, s1, s2;
> +
> +	bgp = devdata->bgp;
> +
> +	/*
> +	 * Errata is applicable for am654 pg 1.0 silicon. There
> +	 * is a variation of the order for 8-10 degree centigrade.
> +	 * Work around that by getting the average of two closest
> +	 * readings out of three readings everytime we want to
> +	 * report temperatures.
> +	 *
> +	 * Errata workaround.
> +	 */
> +	s0 = readl(bgp->base + devdata->stat_offset) &
> +		K3_VTM_TS_STAT_DTEMP_MASK;
> +	s1 = readl(bgp->base + devdata->stat_offset) &
> +		K3_VTM_TS_STAT_DTEMP_MASK;
> +	s2 = readl(bgp->base + devdata->stat_offset) &
> +		K3_VTM_TS_STAT_DTEMP_MASK;
> +	dtemp = vtm_get_best_value(s0, s1, s2);
> +
> +	if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL)
> +		return -EINVAL;
> +
> +	*temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL];
> +
> +	return 0;
> +}
> +
> +static int k3_thermal_get_temp(void *devdata, int *temp)
> +{
> +	struct k3_thermal_data *data = devdata;
> +	int ret = 0;
> +
> +	ret = k3_bgp_read_temp(data, temp);
> +	if (ret)
> +		return ret;
> +
> +	return ret;
> +}
> +
> +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = {
> +	.get_temp = k3_thermal_get_temp,
> +};
> +
> +static const struct of_device_id of_k3_bandgap_match[];
> +
> +static int k3_bandgap_probe(struct platform_device *pdev)
> +{
> +	int ret = 0, cnt, val, id, reg_cnt = 0;
> +	struct resource *res;
> +	struct device *dev = &pdev->dev;
> +	struct k3_bandgap *bgp;
> +	struct k3_thermal_data *data;
> +
> +	if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 -
> +						K3_VTM_ADC_BEGIN_VAL))
> +		return -EINVAL;
> +
> +	bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
> +	if (!bgp)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	bgp->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(bgp->base))
> +		return PTR_ERR(bgp->base);
> +
> +	pm_runtime_enable(dev);
> +	ret = pm_runtime_get_sync(dev);
> +	if (ret < 0) {
> +		pm_runtime_put_noidle(dev);
> +		pm_runtime_disable(dev);
> +		return ret;
> +	}
> +
> +	/* Get the sensor count in the VTM */
> +	val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
> +	cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
> +	cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
> +
> +	data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL);
> +	if (!data) {
> +		ret = -ENOMEM;
> +		goto err_alloc;
> +	}
> +
> +	/* Register the thermal sensors */
> +	for (id = 0; id < cnt; id++) {
> +		data[id].sensor_id = id;
> +		data[id].bgp = bgp;
> +		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
> +					id * K3_VTM_REGS_PER_TS;
> +		data[id].stat_offset = data[id].ctrl_offset + 0x8;
> +
> +		val = readl(data[id].bgp->base + data[id].ctrl_offset);
> +		val |= (K3_VTM_TMPSENS_CTRL_SOC |
> +			K3_VTM_TMPSENS_CTRL_CLRZ |
> +			K3_VTM_TMPSENS_CTRL_CLKON_REQ);
> +		val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
> +		writel(val, data[id].bgp->base + data[id].ctrl_offset);
> +
> +		data[id].ti_thermal =
> +		devm_thermal_zone_of_sensor_register(dev, id,
> +						     &data[id],
> +						     &k3_of_thermal_ops);
> +		if (IS_ERR(data[id].ti_thermal)) {
> +			dev_err(dev, "thermal zone device is NULL\n");
> +			ret = PTR_ERR(data[id].ti_thermal);
> +			goto err_alloc;
> +		}
> +
> +		reg_cnt++;
> +	}
> +
> +	platform_set_drvdata(pdev, bgp);
> +
> +	return 0;
> +
> +err_alloc:
> +	pm_runtime_put_sync(&pdev->dev);
> +	pm_runtime_disable(&pdev->dev);
> +
> +	return ret;
> +}
> +
> +static int k3_bandgap_remove(struct platform_device *pdev)
> +{
> +	pm_runtime_put_sync(&pdev->dev);
> +	pm_runtime_disable(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id of_k3_bandgap_match[] = {
> +	{
> +		.compatible = "ti,am654-vtm",
> +	},
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, of_k3_bandgap_match);
> +
> +static struct platform_driver k3_bandgap_sensor_driver = {
> +	.probe = k3_bandgap_probe,
> +	.remove = k3_bandgap_remove,
> +	.driver = {
> +		.name = "k3-soc-thermal",
> +		.of_match_table	= of_k3_bandgap_match,
> +	},
> +};
> +
> +module_platform_driver(k3_bandgap_sensor_driver);
> +
> +MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
>
Daniel Lezcano April 6, 2020, 4:40 p.m. UTC | #2
On 31/03/2020 09:53, Keerthy wrote:
> The bandgap provides current and voltage reference for its internal
> circuits and other analog IP blocks. The analog-to-digital
> converter (ADC) produces an output value that is proportional
> to the silicon temperature.
> 
> Currently reading temperatures only is supported.
> There are no active/passive cooling agent supported.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---

[ ... ]

> +static int k3_bandgap_probe(struct platform_device *pdev)
> +{
> +	int ret = 0, cnt, val, id, reg_cnt = 0;

We missed 'reg_cnt' which is not used.

[ ... ]

> +	/* Register the thermal sensors */
> +	for (id = 0; id < cnt; id++) {
> +		data[id].sensor_id = id;
> +		data[id].bgp = bgp;
> +		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
> +					id * K3_VTM_REGS_PER_TS;
> +		data[id].stat_offset = data[id].ctrl_offset + 0x8;
> +
> +		val = readl(data[id].bgp->base + data[id].ctrl_offset);
> +		val |= (K3_VTM_TMPSENS_CTRL_SOC |
> +			K3_VTM_TMPSENS_CTRL_CLRZ |
> +			K3_VTM_TMPSENS_CTRL_CLKON_REQ);
> +		val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
> +		writel(val, data[id].bgp->base + data[id].ctrl_offset);
> +
> +		data[id].ti_thermal =
> +		devm_thermal_zone_of_sensor_register(dev, id,
> +						     &data[id],
> +						     &k3_of_thermal_ops);
> +		if (IS_ERR(data[id].ti_thermal)) {
> +			dev_err(dev, "thermal zone device is NULL\n");
> +			ret = PTR_ERR(data[id].ti_thermal);
> +			goto err_alloc;
> +		}
> +
> +		reg_cnt++;
> +	}

[ ... ]
Amit Kucheria April 6, 2020, 6:55 p.m. UTC | #3
On Tue, Mar 31, 2020 at 1:24 PM Keerthy <j-keerthy@ti.com> wrote:
>
> The bandgap provides current and voltage reference for its internal
> circuits and other analog IP blocks. The analog-to-digital
> converter (ADC) produces an output value that is proportional
> to the silicon temperature.
>
> Currently reading temperatures only is supported.
> There are no active/passive cooling agent supported.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
>
> Changes in v5:
>
>   * Removed thermal work function which was unused.
>   * Removed unused preve_tenmp and a couple more struct variables.
>   * Removed couple of redundant header function include.
>
>  drivers/thermal/Kconfig      |  10 ++
>  drivers/thermal/Makefile     |   1 +
>  drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++
>  3 files changed, 279 insertions(+)
>  create mode 100644 drivers/thermal/k3_bandgap.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 5a05db5438d6..1df434527f8d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -251,6 +251,16 @@ config IMX_THERMAL
>           cpufreq is used as the cooling device to throttle CPUs when the
>           passive trip is crossed.
>
> +config K3_THERMAL
> +       tristate "Texas Instruments K3 thermal support"
> +       depends on ARCH_K3 || COMPILE_TEST
> +       help
> +         If you say yes here you get thermal support for the Texas Instruments
> +         K3 SoC family. The current chip supported is:
> +          - AM654
> +
> +         This includes temperature reading functionality.
> +
>  config MAX77620_THERMAL
>         tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
>         depends on MFD_MAX77620
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 9fb88e26fb10..5ad6535139ae 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL)   += clock_cooling.o
>  # devfreq cooling
>  thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
>
> +obj-$(CONFIG_K3_THERMAL)       += k3_bandgap.o
>  # platform thermal drivers
>  obj-y                          += broadcom/
>  obj-$(CONFIG_THERMAL_MMIO)             += thermal_mmio.o
> diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
> new file mode 100644
> index 000000000000..1d976af4461a
> --- /dev/null
> +++ b/drivers/thermal/k3_bandgap.c
> @@ -0,0 +1,268 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI Bandgap temperature sensor driver for K3 SoC Family
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/err.h>
> +#include <linux/types.h>
> +#include <linux/of_platform.h>
> +#include <linux/io.h>
> +#include <linux/thermal.h>
> +#include <linux/of.h>
> +

Sort these includes alphabetically


> +#define K3_VTM_DEVINFO_PWR0_OFFSET             0x4
> +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK        0xf

Not used, remove.

> +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK   0xf0
> +#define K3_VTM_TMPSENS0_CTRL_OFFSET    0x80
> +#define K3_VTM_REGS_PER_TS                     0x10
> +#define K3_VTM_TS_STAT_DTEMP_MASK      0x3ff
> +#define K3_VTM_MAX_NUM_TS              8

Not used, remove

> +#define K3_VTM_TMPSENS_CTRL_CBIASSEL   BIT(0)
> +#define K3_VTM_TMPSENS_CTRL_SOC                BIT(5)
> +#define K3_VTM_TMPSENS_CTRL_CLRZ               BIT(6)
> +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ  BIT(7)
> +
> +#define K3_VTM_ADC_BEGIN_VAL           540
> +#define K3_VTM_ADC_END_VAL             944
> +
> +static const int k3_adc_to_temp[] = {
> +       -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
> +       -37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200,
> +       -33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600,
> +       -30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600,
> +       -26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000,
> +       -22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000,
> +       -18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400,
> +       -15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400,
> +       -11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400,
> +       -7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000,
> +       -2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400,
> +       1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600,
> +       7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000,
> +       11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400,
> +       15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400,
> +       19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800,
> +       24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800,
> +       28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900,
> +       32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200,
> +       36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200,
> +       40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600,
> +       45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600,
> +       49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600,
> +       53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000,
> +       57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000,
> +       61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000,
> +       65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000,
> +       69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400,
> +       73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400,
> +       77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400,
> +       81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400,
> +       85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400,
> +       89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400,
> +       93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500,
> +       98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400,
> +       101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000,
> +       105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600,
> +       109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200,
> +       112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800,
> +       116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400,
> +       119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
> +       123400, 123800, 124200, 124600, 124900, 125000,
> +};
> +
> +struct k3_bandgap {
> +       void __iomem *base;
> +       const struct k3_bandgap_data *conf;
> +};
> +
> +/* common data structures */
> +struct k3_thermal_data {
> +       struct thermal_zone_device *ti_thermal;

Nit: perhap use tzd/tzdev instead of ti_thermal which doesn't really say much?

> +       struct k3_bandgap *bgp;
> +       int sensor_id;
> +       u32 ctrl_offset;
> +       u32 stat_offset;
> +};
> +
> +static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
> +                                      unsigned int s2)
> +{
> +       int d01 = abs(s0 - s1);
> +       int d02 = abs(s0 - s2);
> +       int d12 = abs(s1 - s2);
> +
> +       if (d01 <= d02 && d01 <= d12)
> +               return (s0 + s1) / 2;
> +
> +       if (d02 <= d01 && d02 <= d12)
> +               return (s0 + s2) / 2;
> +
> +       return (s1 + s2) / 2;
> +}
> +
> +static int k3_bgp_read_temp(struct k3_thermal_data *devdata,
> +                           int *temp)
> +{
> +       struct k3_bandgap *bgp;
> +       unsigned int dtemp, s0, s1, s2;
> +
> +       bgp = devdata->bgp;
> +
> +       /*
> +        * Errata is applicable for am654 pg 1.0 silicon. There
> +        * is a variation of the order for 8-10 degree centigrade.
> +        * Work around that by getting the average of two closest
> +        * readings out of three readings everytime we want to
> +        * report temperatures.
> +        *
> +        * Errata workaround.

So there is no fix in later versions of silicon? If so, shouldn't this
errata only apply to a subset of chips after checking some IP version?


> +        */
> +       s0 = readl(bgp->base + devdata->stat_offset) &
> +               K3_VTM_TS_STAT_DTEMP_MASK;
> +       s1 = readl(bgp->base + devdata->stat_offset) &
> +               K3_VTM_TS_STAT_DTEMP_MASK;
> +       s2 = readl(bgp->base + devdata->stat_offset) &
> +               K3_VTM_TS_STAT_DTEMP_MASK;
> +       dtemp = vtm_get_best_value(s0, s1, s2);
> +
> +       if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL)
> +               return -EINVAL;
> +
> +       *temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL];
> +
> +       return 0;
> +}
> +
> +static int k3_thermal_get_temp(void *devdata, int *temp)
> +{
> +       struct k3_thermal_data *data = devdata;
> +       int ret = 0;
> +
> +       ret = k3_bgp_read_temp(data, temp);
> +       if (ret)
> +               return ret;
> +
> +       return ret;
> +}
> +
> +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = {
> +       .get_temp = k3_thermal_get_temp,
> +};
> +
> +static const struct of_device_id of_k3_bandgap_match[];
> +
> +static int k3_bandgap_probe(struct platform_device *pdev)
> +{
> +       int ret = 0, cnt, val, id, reg_cnt = 0;
> +       struct resource *res;
> +       struct device *dev = &pdev->dev;
> +       struct k3_bandgap *bgp;
> +       struct k3_thermal_data *data;
> +
> +       if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 -
> +                                               K3_VTM_ADC_BEGIN_VAL))
> +               return -EINVAL;
> +
> +       bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
> +       if (!bgp)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       bgp->base = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(bgp->base))
> +               return PTR_ERR(bgp->base);
> +
> +       pm_runtime_enable(dev);
> +       ret = pm_runtime_get_sync(dev);
> +       if (ret < 0) {
> +               pm_runtime_put_noidle(dev);
> +               pm_runtime_disable(dev);
> +               return ret;
> +       }
> +
> +       /* Get the sensor count in the VTM */
> +       val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
> +       cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
> +       cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
> +
> +       data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL);
> +       if (!data) {
> +               ret = -ENOMEM;
> +               goto err_alloc;
> +       }
> +
> +       /* Register the thermal sensors */
> +       for (id = 0; id < cnt; id++) {
> +               data[id].sensor_id = id;
> +               data[id].bgp = bgp;
> +               data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
> +                                       id * K3_VTM_REGS_PER_TS;
> +               data[id].stat_offset = data[id].ctrl_offset + 0x8;
> +
> +               val = readl(data[id].bgp->base + data[id].ctrl_offset);
> +               val |= (K3_VTM_TMPSENS_CTRL_SOC |
> +                       K3_VTM_TMPSENS_CTRL_CLRZ |
> +                       K3_VTM_TMPSENS_CTRL_CLKON_REQ);
> +               val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
> +               writel(val, data[id].bgp->base + data[id].ctrl_offset);
> +
> +               data[id].ti_thermal =
> +               devm_thermal_zone_of_sensor_register(dev, id,
> +                                                    &data[id],
> +                                                    &k3_of_thermal_ops);
> +               if (IS_ERR(data[id].ti_thermal)) {
> +                       dev_err(dev, "thermal zone device is NULL\n");
> +                       ret = PTR_ERR(data[id].ti_thermal);
> +                       goto err_alloc;
> +               }
> +
> +               reg_cnt++;
> +       }
> +
> +       platform_set_drvdata(pdev, bgp);
> +
> +       return 0;
> +
> +err_alloc:
> +       pm_runtime_put_sync(&pdev->dev);
> +       pm_runtime_disable(&pdev->dev);

Just use dev?


> +
> +       return ret;
> +}
> +
> +static int k3_bandgap_remove(struct platform_device *pdev)
> +{
> +       pm_runtime_put_sync(&pdev->dev);
> +       pm_runtime_disable(&pdev->dev);
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id of_k3_bandgap_match[] = {
> +       {
> +               .compatible = "ti,am654-vtm",
> +       },
> +       { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, of_k3_bandgap_match);
> +
> +static struct platform_driver k3_bandgap_sensor_driver = {
> +       .probe = k3_bandgap_probe,
> +       .remove = k3_bandgap_remove,
> +       .driver = {
> +               .name = "k3-soc-thermal",
> +               .of_match_table = of_k3_bandgap_match,
> +       },
> +};
> +
> +module_platform_driver(k3_bandgap_sensor_driver);
> +
> +MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
> --
> 2.17.1
>
Amit Kucheria April 6, 2020, 6:59 p.m. UTC | #4
On Tue, Mar 31, 2020 at 1:24 PM Keerthy <j-keerthy@ti.com> wrote:
>
> The bandgap provides current and voltage reference for its internal
> circuits and other analog IP blocks. The analog-to-digital
> converter (ADC) produces an output value that is proportional
> to the silicon temperature.

Your cover letter seems to have useful information that belongs in
this commit message IMO.

>
> Currently reading temperatures only is supported.
> There are no active/passive cooling agent supported.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
>
> Changes in v5:
>
>   * Removed thermal work function which was unused.
>   * Removed unused preve_tenmp and a couple more struct variables.
>   * Removed couple of redundant header function include.
>
>  drivers/thermal/Kconfig      |  10 ++
>  drivers/thermal/Makefile     |   1 +
>  drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++
>  3 files changed, 279 insertions(+)
>  create mode 100644 drivers/thermal/k3_bandgap.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 5a05db5438d6..1df434527f8d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -251,6 +251,16 @@ config IMX_THERMAL
>           cpufreq is used as the cooling device to throttle CPUs when the
>           passive trip is crossed.
>
> +config K3_THERMAL
> +       tristate "Texas Instruments K3 thermal support"
> +       depends on ARCH_K3 || COMPILE_TEST
> +       help
> +         If you say yes here you get thermal support for the Texas Instruments
> +         K3 SoC family. The current chip supported is:
> +          - AM654
> +
> +         This includes temperature reading functionality.
> +
>  config MAX77620_THERMAL
>         tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
>         depends on MFD_MAX77620
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 9fb88e26fb10..5ad6535139ae 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL)   += clock_cooling.o
>  # devfreq cooling
>  thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
>
> +obj-$(CONFIG_K3_THERMAL)       += k3_bandgap.o
>  # platform thermal drivers
>  obj-y                          += broadcom/
>  obj-$(CONFIG_THERMAL_MMIO)             += thermal_mmio.o
> diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
> new file mode 100644
> index 000000000000..1d976af4461a
> --- /dev/null
> +++ b/drivers/thermal/k3_bandgap.c
> @@ -0,0 +1,268 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI Bandgap temperature sensor driver for K3 SoC Family
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/err.h>
> +#include <linux/types.h>
> +#include <linux/of_platform.h>
> +#include <linux/io.h>
> +#include <linux/thermal.h>
> +#include <linux/of.h>
> +
> +#define K3_VTM_DEVINFO_PWR0_OFFSET             0x4
> +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK        0xf
> +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK   0xf0
> +#define K3_VTM_TMPSENS0_CTRL_OFFSET    0x80
> +#define K3_VTM_REGS_PER_TS                     0x10
> +#define K3_VTM_TS_STAT_DTEMP_MASK      0x3ff
> +#define K3_VTM_MAX_NUM_TS              8
> +#define K3_VTM_TMPSENS_CTRL_CBIASSEL   BIT(0)
> +#define K3_VTM_TMPSENS_CTRL_SOC                BIT(5)
> +#define K3_VTM_TMPSENS_CTRL_CLRZ               BIT(6)
> +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ  BIT(7)
> +
> +#define K3_VTM_ADC_BEGIN_VAL           540
> +#define K3_VTM_ADC_END_VAL             944
> +
> +static const int k3_adc_to_temp[] = {
> +       -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
> +       -37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200,
> +       -33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600,
> +       -30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600,
> +       -26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000,
> +       -22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000,
> +       -18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400,
> +       -15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400,
> +       -11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400,
> +       -7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000,
> +       -2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400,
> +       1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600,
> +       7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000,
> +       11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400,
> +       15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400,
> +       19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800,
> +       24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800,
> +       28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900,
> +       32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200,
> +       36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200,
> +       40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600,
> +       45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600,
> +       49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600,
> +       53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000,
> +       57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000,
> +       61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000,
> +       65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000,
> +       69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400,
> +       73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400,
> +       77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400,
> +       81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400,
> +       85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400,
> +       89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400,
> +       93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500,
> +       98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400,
> +       101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000,
> +       105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600,
> +       109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200,
> +       112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800,
> +       116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400,
> +       119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
> +       123400, 123800, 124200, 124600, 124900, 125000,
> +};
> +
> +struct k3_bandgap {
> +       void __iomem *base;
> +       const struct k3_bandgap_data *conf;
> +};
> +
> +/* common data structures */
> +struct k3_thermal_data {
> +       struct thermal_zone_device *ti_thermal;
> +       struct k3_bandgap *bgp;
> +       int sensor_id;
> +       u32 ctrl_offset;
> +       u32 stat_offset;
> +};
> +
> +static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
> +                                      unsigned int s2)
> +{
> +       int d01 = abs(s0 - s1);
> +       int d02 = abs(s0 - s2);
> +       int d12 = abs(s1 - s2);
> +
> +       if (d01 <= d02 && d01 <= d12)
> +               return (s0 + s1) / 2;
> +
> +       if (d02 <= d01 && d02 <= d12)
> +               return (s0 + s2) / 2;
> +
> +       return (s1 + s2) / 2;
> +}
> +
> +static int k3_bgp_read_temp(struct k3_thermal_data *devdata,
> +                           int *temp)
> +{
> +       struct k3_bandgap *bgp;
> +       unsigned int dtemp, s0, s1, s2;
> +
> +       bgp = devdata->bgp;
> +
> +       /*
> +        * Errata is applicable for am654 pg 1.0 silicon. There
> +        * is a variation of the order for 8-10 degree centigrade.
> +        * Work around that by getting the average of two closest
> +        * readings out of three readings everytime we want to
> +        * report temperatures.
> +        *
> +        * Errata workaround.
> +        */
> +       s0 = readl(bgp->base + devdata->stat_offset) &
> +               K3_VTM_TS_STAT_DTEMP_MASK;
> +       s1 = readl(bgp->base + devdata->stat_offset) &
> +               K3_VTM_TS_STAT_DTEMP_MASK;
> +       s2 = readl(bgp->base + devdata->stat_offset) &
> +               K3_VTM_TS_STAT_DTEMP_MASK;
> +       dtemp = vtm_get_best_value(s0, s1, s2);
> +
> +       if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL)
> +               return -EINVAL;
> +
> +       *temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL];
> +
> +       return 0;
> +}
> +
> +static int k3_thermal_get_temp(void *devdata, int *temp)
> +{
> +       struct k3_thermal_data *data = devdata;
> +       int ret = 0;
> +
> +       ret = k3_bgp_read_temp(data, temp);
> +       if (ret)
> +               return ret;
> +
> +       return ret;
> +}
> +
> +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = {
> +       .get_temp = k3_thermal_get_temp,
> +};
> +
> +static const struct of_device_id of_k3_bandgap_match[];
> +
> +static int k3_bandgap_probe(struct platform_device *pdev)
> +{
> +       int ret = 0, cnt, val, id, reg_cnt = 0;
> +       struct resource *res;
> +       struct device *dev = &pdev->dev;
> +       struct k3_bandgap *bgp;
> +       struct k3_thermal_data *data;
> +
> +       if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 -
> +                                               K3_VTM_ADC_BEGIN_VAL))
> +               return -EINVAL;
> +
> +       bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
> +       if (!bgp)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       bgp->base = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(bgp->base))
> +               return PTR_ERR(bgp->base);
> +
> +       pm_runtime_enable(dev);
> +       ret = pm_runtime_get_sync(dev);
> +       if (ret < 0) {
> +               pm_runtime_put_noidle(dev);
> +               pm_runtime_disable(dev);
> +               return ret;
> +       }
> +
> +       /* Get the sensor count in the VTM */
> +       val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
> +       cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
> +       cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
> +
> +       data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL);
> +       if (!data) {
> +               ret = -ENOMEM;
> +               goto err_alloc;
> +       }
> +
> +       /* Register the thermal sensors */
> +       for (id = 0; id < cnt; id++) {
> +               data[id].sensor_id = id;
> +               data[id].bgp = bgp;
> +               data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
> +                                       id * K3_VTM_REGS_PER_TS;
> +               data[id].stat_offset = data[id].ctrl_offset + 0x8;
> +
> +               val = readl(data[id].bgp->base + data[id].ctrl_offset);
> +               val |= (K3_VTM_TMPSENS_CTRL_SOC |
> +                       K3_VTM_TMPSENS_CTRL_CLRZ |
> +                       K3_VTM_TMPSENS_CTRL_CLKON_REQ);
> +               val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
> +               writel(val, data[id].bgp->base + data[id].ctrl_offset);
> +
> +               data[id].ti_thermal =
> +               devm_thermal_zone_of_sensor_register(dev, id,
> +                                                    &data[id],
> +                                                    &k3_of_thermal_ops);
> +               if (IS_ERR(data[id].ti_thermal)) {
> +                       dev_err(dev, "thermal zone device is NULL\n");
> +                       ret = PTR_ERR(data[id].ti_thermal);
> +                       goto err_alloc;
> +               }
> +
> +               reg_cnt++;
> +       }
> +
> +       platform_set_drvdata(pdev, bgp);
> +
> +       return 0;
> +
> +err_alloc:
> +       pm_runtime_put_sync(&pdev->dev);
> +       pm_runtime_disable(&pdev->dev);
> +
> +       return ret;
> +}
> +
> +static int k3_bandgap_remove(struct platform_device *pdev)
> +{
> +       pm_runtime_put_sync(&pdev->dev);
> +       pm_runtime_disable(&pdev->dev);
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id of_k3_bandgap_match[] = {
> +       {
> +               .compatible = "ti,am654-vtm",
> +       },
> +       { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, of_k3_bandgap_match);
> +
> +static struct platform_driver k3_bandgap_sensor_driver = {
> +       .probe = k3_bandgap_probe,
> +       .remove = k3_bandgap_remove,
> +       .driver = {
> +               .name = "k3-soc-thermal",
> +               .of_match_table = of_k3_bandgap_match,
> +       },
> +};
> +
> +module_platform_driver(k3_bandgap_sensor_driver);
> +
> +MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
> --
> 2.17.1
>
J, KEERTHY April 7, 2020, 1:22 a.m. UTC | #5
On 4/7/2020 12:25 AM, Amit Kucheria wrote:
> On Tue, Mar 31, 2020 at 1:24 PM Keerthy <j-keerthy@ti.com> wrote:
>>
>> The bandgap provides current and voltage reference for its internal
>> circuits and other analog IP blocks. The analog-to-digital
>> converter (ADC) produces an output value that is proportional
>> to the silicon temperature.
>>
>> Currently reading temperatures only is supported.
>> There are no active/passive cooling agent supported.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>
>> Changes in v5:
>>
>>    * Removed thermal work function which was unused.
>>    * Removed unused preve_tenmp and a couple more struct variables.
>>    * Removed couple of redundant header function include.
>>
>>   drivers/thermal/Kconfig      |  10 ++
>>   drivers/thermal/Makefile     |   1 +
>>   drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++
>>   3 files changed, 279 insertions(+)
>>   create mode 100644 drivers/thermal/k3_bandgap.c
>>
>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
>> index 5a05db5438d6..1df434527f8d 100644
>> --- a/drivers/thermal/Kconfig
>> +++ b/drivers/thermal/Kconfig
>> @@ -251,6 +251,16 @@ config IMX_THERMAL
>>            cpufreq is used as the cooling device to throttle CPUs when the
>>            passive trip is crossed.
>>
>> +config K3_THERMAL
>> +       tristate "Texas Instruments K3 thermal support"
>> +       depends on ARCH_K3 || COMPILE_TEST
>> +       help
>> +         If you say yes here you get thermal support for the Texas Instruments
>> +         K3 SoC family. The current chip supported is:
>> +          - AM654
>> +
>> +         This includes temperature reading functionality.
>> +
>>   config MAX77620_THERMAL
>>          tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
>>          depends on MFD_MAX77620
>> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
>> index 9fb88e26fb10..5ad6535139ae 100644
>> --- a/drivers/thermal/Makefile
>> +++ b/drivers/thermal/Makefile
>> @@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL)   += clock_cooling.o
>>   # devfreq cooling
>>   thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
>>
>> +obj-$(CONFIG_K3_THERMAL)       += k3_bandgap.o
>>   # platform thermal drivers
>>   obj-y                          += broadcom/
>>   obj-$(CONFIG_THERMAL_MMIO)             += thermal_mmio.o
>> diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
>> new file mode 100644
>> index 000000000000..1d976af4461a
>> --- /dev/null
>> +++ b/drivers/thermal/k3_bandgap.c
>> @@ -0,0 +1,268 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * TI Bandgap temperature sensor driver for K3 SoC Family
>> + *
>> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/err.h>
>> +#include <linux/types.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/io.h>
>> +#include <linux/thermal.h>
>> +#include <linux/of.h>
>> +
> 
> Sort these includes alphabetically

Okay

> 
> 
>> +#define K3_VTM_DEVINFO_PWR0_OFFSET             0x4
>> +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK        0xf
> 
> Not used, remove.

Okay

> 
>> +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK   0xf0
>> +#define K3_VTM_TMPSENS0_CTRL_OFFSET    0x80
>> +#define K3_VTM_REGS_PER_TS                     0x10
>> +#define K3_VTM_TS_STAT_DTEMP_MASK      0x3ff
>> +#define K3_VTM_MAX_NUM_TS              8
> 
> Not used, remove

okay

> 
>> +#define K3_VTM_TMPSENS_CTRL_CBIASSEL   BIT(0)
>> +#define K3_VTM_TMPSENS_CTRL_SOC                BIT(5)
>> +#define K3_VTM_TMPSENS_CTRL_CLRZ               BIT(6)
>> +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ  BIT(7)
>> +
>> +#define K3_VTM_ADC_BEGIN_VAL           540
>> +#define K3_VTM_ADC_END_VAL             944
>> +
>> +static const int k3_adc_to_temp[] = {
>> +       -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
>> +       -37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200,
>> +       -33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600,
>> +       -30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600,
>> +       -26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000,
>> +       -22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000,
>> +       -18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400,
>> +       -15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400,
>> +       -11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400,
>> +       -7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000,
>> +       -2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400,
>> +       1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600,
>> +       7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000,
>> +       11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400,
>> +       15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400,
>> +       19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800,
>> +       24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800,
>> +       28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900,
>> +       32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200,
>> +       36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200,
>> +       40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600,
>> +       45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600,
>> +       49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600,
>> +       53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000,
>> +       57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000,
>> +       61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000,
>> +       65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000,
>> +       69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400,
>> +       73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400,
>> +       77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400,
>> +       81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400,
>> +       85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400,
>> +       89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400,
>> +       93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500,
>> +       98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400,
>> +       101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000,
>> +       105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600,
>> +       109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200,
>> +       112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800,
>> +       116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400,
>> +       119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
>> +       123400, 123800, 124200, 124600, 124900, 125000,
>> +};
>> +
>> +struct k3_bandgap {
>> +       void __iomem *base;
>> +       const struct k3_bandgap_data *conf;
>> +};
>> +
>> +/* common data structures */
>> +struct k3_thermal_data {
>> +       struct thermal_zone_device *ti_thermal;
> 
> Nit: perhap use tzd/tzdev instead of ti_thermal which doesn't really say much?

okay

> 
>> +       struct k3_bandgap *bgp;
>> +       int sensor_id;
>> +       u32 ctrl_offset;
>> +       u32 stat_offset;
>> +};
>> +
>> +static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
>> +                                      unsigned int s2)
>> +{
>> +       int d01 = abs(s0 - s1);
>> +       int d02 = abs(s0 - s2);
>> +       int d12 = abs(s1 - s2);
>> +
>> +       if (d01 <= d02 && d01 <= d12)
>> +               return (s0 + s1) / 2;
>> +
>> +       if (d02 <= d01 && d02 <= d12)
>> +               return (s0 + s2) / 2;
>> +
>> +       return (s1 + s2) / 2;
>> +}
>> +
>> +static int k3_bgp_read_temp(struct k3_thermal_data *devdata,
>> +                           int *temp)
>> +{
>> +       struct k3_bandgap *bgp;
>> +       unsigned int dtemp, s0, s1, s2;
>> +
>> +       bgp = devdata->bgp;
>> +
>> +       /*
>> +        * Errata is applicable for am654 pg 1.0 silicon. There
>> +        * is a variation of the order for 8-10 degree centigrade.
>> +        * Work around that by getting the average of two closest
>> +        * readings out of three readings everytime we want to
>> +        * report temperatures.
>> +        *
>> +        * Errata workaround.
> 
> So there is no fix in later versions of silicon? If so, shouldn't this
> errata only apply to a subset of chips after checking some IP version?

The previous version of the driver had a check. Since no version of the 
silcion with that errata fixed it out i was adviced to on keeping this 
default.
Once that is supported will bring in the check.

> 
> 
>> +        */
>> +       s0 = readl(bgp->base + devdata->stat_offset) &
>> +               K3_VTM_TS_STAT_DTEMP_MASK;
>> +       s1 = readl(bgp->base + devdata->stat_offset) &
>> +               K3_VTM_TS_STAT_DTEMP_MASK;
>> +       s2 = readl(bgp->base + devdata->stat_offset) &
>> +               K3_VTM_TS_STAT_DTEMP_MASK;
>> +       dtemp = vtm_get_best_value(s0, s1, s2);
>> +
>> +       if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL)
>> +               return -EINVAL;
>> +
>> +       *temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL];
>> +
>> +       return 0;
>> +}
>> +
>> +static int k3_thermal_get_temp(void *devdata, int *temp)
>> +{
>> +       struct k3_thermal_data *data = devdata;
>> +       int ret = 0;
>> +
>> +       ret = k3_bgp_read_temp(data, temp);
>> +       if (ret)
>> +               return ret;
>> +
>> +       return ret;
>> +}
>> +
>> +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = {
>> +       .get_temp = k3_thermal_get_temp,
>> +};
>> +
>> +static const struct of_device_id of_k3_bandgap_match[];
>> +
>> +static int k3_bandgap_probe(struct platform_device *pdev)
>> +{
>> +       int ret = 0, cnt, val, id, reg_cnt = 0;
>> +       struct resource *res;
>> +       struct device *dev = &pdev->dev;
>> +       struct k3_bandgap *bgp;
>> +       struct k3_thermal_data *data;
>> +
>> +       if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 -
>> +                                               K3_VTM_ADC_BEGIN_VAL))
>> +               return -EINVAL;
>> +
>> +       bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
>> +       if (!bgp)
>> +               return -ENOMEM;
>> +
>> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +       bgp->base = devm_ioremap_resource(dev, res);
>> +       if (IS_ERR(bgp->base))
>> +               return PTR_ERR(bgp->base);
>> +
>> +       pm_runtime_enable(dev);
>> +       ret = pm_runtime_get_sync(dev);
>> +       if (ret < 0) {
>> +               pm_runtime_put_noidle(dev);
>> +               pm_runtime_disable(dev);
>> +               return ret;
>> +       }
>> +
>> +       /* Get the sensor count in the VTM */
>> +       val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
>> +       cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
>> +       cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
>> +
>> +       data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL);
>> +       if (!data) {
>> +               ret = -ENOMEM;
>> +               goto err_alloc;
>> +       }
>> +
>> +       /* Register the thermal sensors */
>> +       for (id = 0; id < cnt; id++) {
>> +               data[id].sensor_id = id;
>> +               data[id].bgp = bgp;
>> +               data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
>> +                                       id * K3_VTM_REGS_PER_TS;
>> +               data[id].stat_offset = data[id].ctrl_offset + 0x8;
>> +
>> +               val = readl(data[id].bgp->base + data[id].ctrl_offset);
>> +               val |= (K3_VTM_TMPSENS_CTRL_SOC |
>> +                       K3_VTM_TMPSENS_CTRL_CLRZ |
>> +                       K3_VTM_TMPSENS_CTRL_CLKON_REQ);
>> +               val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
>> +               writel(val, data[id].bgp->base + data[id].ctrl_offset);
>> +
>> +               data[id].ti_thermal =
>> +               devm_thermal_zone_of_sensor_register(dev, id,
>> +                                                    &data[id],
>> +                                                    &k3_of_thermal_ops);
>> +               if (IS_ERR(data[id].ti_thermal)) {
>> +                       dev_err(dev, "thermal zone device is NULL\n");
>> +                       ret = PTR_ERR(data[id].ti_thermal);
>> +                       goto err_alloc;
>> +               }
>> +
>> +               reg_cnt++;
>> +       }
>> +
>> +       platform_set_drvdata(pdev, bgp);
>> +
>> +       return 0;
>> +
>> +err_alloc:
>> +       pm_runtime_put_sync(&pdev->dev);
>> +       pm_runtime_disable(&pdev->dev);
> 
> Just use dev?

Okay

Thanks for the review.

Regards,
Keerthy
> 
> 
>> +
>> +       return ret;
>> +}
>> +
>> +static int k3_bandgap_remove(struct platform_device *pdev)
>> +{
>> +       pm_runtime_put_sync(&pdev->dev);
>> +       pm_runtime_disable(&pdev->dev);
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct of_device_id of_k3_bandgap_match[] = {
>> +       {
>> +               .compatible = "ti,am654-vtm",
>> +       },
>> +       { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, of_k3_bandgap_match);
>> +
>> +static struct platform_driver k3_bandgap_sensor_driver = {
>> +       .probe = k3_bandgap_probe,
>> +       .remove = k3_bandgap_remove,
>> +       .driver = {
>> +               .name = "k3-soc-thermal",
>> +               .of_match_table = of_k3_bandgap_match,
>> +       },
>> +};
>> +
>> +module_platform_driver(k3_bandgap_sensor_driver);
>> +
>> +MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
>> --
>> 2.17.1
>>
J, KEERTHY April 7, 2020, 1:24 a.m. UTC | #6
On 4/7/2020 12:29 AM, Amit Kucheria wrote:
> On Tue, Mar 31, 2020 at 1:24 PM Keerthy <j-keerthy@ti.com> wrote:
>>
>> The bandgap provides current and voltage reference for its internal
>> circuits and other analog IP blocks. The analog-to-digital
>> converter (ADC) produces an output value that is proportional
>> to the silicon temperature.
> 
> Your cover letter seems to have useful information that belongs in
> this commit message IMO.

Okay. I will add that information here as well.

- Keerthy
> 
>>
>> Currently reading temperatures only is supported.
>> There are no active/passive cooling agent supported.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>
>> Changes in v5:
>>
>>    * Removed thermal work function which was unused.
>>    * Removed unused preve_tenmp and a couple more struct variables.
>>    * Removed couple of redundant header function include.
>>
>>   drivers/thermal/Kconfig      |  10 ++
>>   drivers/thermal/Makefile     |   1 +
>>   drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++
>>   3 files changed, 279 insertions(+)
>>   create mode 100644 drivers/thermal/k3_bandgap.c
>>
>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
>> index 5a05db5438d6..1df434527f8d 100644
>> --- a/drivers/thermal/Kconfig
>> +++ b/drivers/thermal/Kconfig
>> @@ -251,6 +251,16 @@ config IMX_THERMAL
>>            cpufreq is used as the cooling device to throttle CPUs when the
>>            passive trip is crossed.
>>
>> +config K3_THERMAL
>> +       tristate "Texas Instruments K3 thermal support"
>> +       depends on ARCH_K3 || COMPILE_TEST
>> +       help
>> +         If you say yes here you get thermal support for the Texas Instruments
>> +         K3 SoC family. The current chip supported is:
>> +          - AM654
>> +
>> +         This includes temperature reading functionality.
>> +
>>   config MAX77620_THERMAL
>>          tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
>>          depends on MFD_MAX77620
>> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
>> index 9fb88e26fb10..5ad6535139ae 100644
>> --- a/drivers/thermal/Makefile
>> +++ b/drivers/thermal/Makefile
>> @@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL)   += clock_cooling.o
>>   # devfreq cooling
>>   thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
>>
>> +obj-$(CONFIG_K3_THERMAL)       += k3_bandgap.o
>>   # platform thermal drivers
>>   obj-y                          += broadcom/
>>   obj-$(CONFIG_THERMAL_MMIO)             += thermal_mmio.o
>> diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
>> new file mode 100644
>> index 000000000000..1d976af4461a
>> --- /dev/null
>> +++ b/drivers/thermal/k3_bandgap.c
>> @@ -0,0 +1,268 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * TI Bandgap temperature sensor driver for K3 SoC Family
>> + *
>> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/err.h>
>> +#include <linux/types.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/io.h>
>> +#include <linux/thermal.h>
>> +#include <linux/of.h>
>> +
>> +#define K3_VTM_DEVINFO_PWR0_OFFSET             0x4
>> +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK        0xf
>> +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK   0xf0
>> +#define K3_VTM_TMPSENS0_CTRL_OFFSET    0x80
>> +#define K3_VTM_REGS_PER_TS                     0x10
>> +#define K3_VTM_TS_STAT_DTEMP_MASK      0x3ff
>> +#define K3_VTM_MAX_NUM_TS              8
>> +#define K3_VTM_TMPSENS_CTRL_CBIASSEL   BIT(0)
>> +#define K3_VTM_TMPSENS_CTRL_SOC                BIT(5)
>> +#define K3_VTM_TMPSENS_CTRL_CLRZ               BIT(6)
>> +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ  BIT(7)
>> +
>> +#define K3_VTM_ADC_BEGIN_VAL           540
>> +#define K3_VTM_ADC_END_VAL             944
>> +
>> +static const int k3_adc_to_temp[] = {
>> +       -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
>> +       -37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200,
>> +       -33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600,
>> +       -30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600,
>> +       -26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000,
>> +       -22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000,
>> +       -18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400,
>> +       -15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400,
>> +       -11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400,
>> +       -7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000,
>> +       -2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400,
>> +       1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600,
>> +       7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000,
>> +       11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400,
>> +       15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400,
>> +       19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800,
>> +       24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800,
>> +       28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900,
>> +       32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200,
>> +       36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200,
>> +       40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600,
>> +       45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600,
>> +       49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600,
>> +       53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000,
>> +       57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000,
>> +       61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000,
>> +       65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000,
>> +       69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400,
>> +       73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400,
>> +       77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400,
>> +       81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400,
>> +       85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400,
>> +       89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400,
>> +       93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500,
>> +       98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400,
>> +       101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000,
>> +       105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600,
>> +       109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200,
>> +       112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800,
>> +       116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400,
>> +       119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
>> +       123400, 123800, 124200, 124600, 124900, 125000,
>> +};
>> +
>> +struct k3_bandgap {
>> +       void __iomem *base;
>> +       const struct k3_bandgap_data *conf;
>> +};
>> +
>> +/* common data structures */
>> +struct k3_thermal_data {
>> +       struct thermal_zone_device *ti_thermal;
>> +       struct k3_bandgap *bgp;
>> +       int sensor_id;
>> +       u32 ctrl_offset;
>> +       u32 stat_offset;
>> +};
>> +
>> +static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
>> +                                      unsigned int s2)
>> +{
>> +       int d01 = abs(s0 - s1);
>> +       int d02 = abs(s0 - s2);
>> +       int d12 = abs(s1 - s2);
>> +
>> +       if (d01 <= d02 && d01 <= d12)
>> +               return (s0 + s1) / 2;
>> +
>> +       if (d02 <= d01 && d02 <= d12)
>> +               return (s0 + s2) / 2;
>> +
>> +       return (s1 + s2) / 2;
>> +}
>> +
>> +static int k3_bgp_read_temp(struct k3_thermal_data *devdata,
>> +                           int *temp)
>> +{
>> +       struct k3_bandgap *bgp;
>> +       unsigned int dtemp, s0, s1, s2;
>> +
>> +       bgp = devdata->bgp;
>> +
>> +       /*
>> +        * Errata is applicable for am654 pg 1.0 silicon. There
>> +        * is a variation of the order for 8-10 degree centigrade.
>> +        * Work around that by getting the average of two closest
>> +        * readings out of three readings everytime we want to
>> +        * report temperatures.
>> +        *
>> +        * Errata workaround.
>> +        */
>> +       s0 = readl(bgp->base + devdata->stat_offset) &
>> +               K3_VTM_TS_STAT_DTEMP_MASK;
>> +       s1 = readl(bgp->base + devdata->stat_offset) &
>> +               K3_VTM_TS_STAT_DTEMP_MASK;
>> +       s2 = readl(bgp->base + devdata->stat_offset) &
>> +               K3_VTM_TS_STAT_DTEMP_MASK;
>> +       dtemp = vtm_get_best_value(s0, s1, s2);
>> +
>> +       if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL)
>> +               return -EINVAL;
>> +
>> +       *temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL];
>> +
>> +       return 0;
>> +}
>> +
>> +static int k3_thermal_get_temp(void *devdata, int *temp)
>> +{
>> +       struct k3_thermal_data *data = devdata;
>> +       int ret = 0;
>> +
>> +       ret = k3_bgp_read_temp(data, temp);
>> +       if (ret)
>> +               return ret;
>> +
>> +       return ret;
>> +}
>> +
>> +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = {
>> +       .get_temp = k3_thermal_get_temp,
>> +};
>> +
>> +static const struct of_device_id of_k3_bandgap_match[];
>> +
>> +static int k3_bandgap_probe(struct platform_device *pdev)
>> +{
>> +       int ret = 0, cnt, val, id, reg_cnt = 0;
>> +       struct resource *res;
>> +       struct device *dev = &pdev->dev;
>> +       struct k3_bandgap *bgp;
>> +       struct k3_thermal_data *data;
>> +
>> +       if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 -
>> +                                               K3_VTM_ADC_BEGIN_VAL))
>> +               return -EINVAL;
>> +
>> +       bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
>> +       if (!bgp)
>> +               return -ENOMEM;
>> +
>> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +       bgp->base = devm_ioremap_resource(dev, res);
>> +       if (IS_ERR(bgp->base))
>> +               return PTR_ERR(bgp->base);
>> +
>> +       pm_runtime_enable(dev);
>> +       ret = pm_runtime_get_sync(dev);
>> +       if (ret < 0) {
>> +               pm_runtime_put_noidle(dev);
>> +               pm_runtime_disable(dev);
>> +               return ret;
>> +       }
>> +
>> +       /* Get the sensor count in the VTM */
>> +       val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
>> +       cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
>> +       cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
>> +
>> +       data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL);
>> +       if (!data) {
>> +               ret = -ENOMEM;
>> +               goto err_alloc;
>> +       }
>> +
>> +       /* Register the thermal sensors */
>> +       for (id = 0; id < cnt; id++) {
>> +               data[id].sensor_id = id;
>> +               data[id].bgp = bgp;
>> +               data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
>> +                                       id * K3_VTM_REGS_PER_TS;
>> +               data[id].stat_offset = data[id].ctrl_offset + 0x8;
>> +
>> +               val = readl(data[id].bgp->base + data[id].ctrl_offset);
>> +               val |= (K3_VTM_TMPSENS_CTRL_SOC |
>> +                       K3_VTM_TMPSENS_CTRL_CLRZ |
>> +                       K3_VTM_TMPSENS_CTRL_CLKON_REQ);
>> +               val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
>> +               writel(val, data[id].bgp->base + data[id].ctrl_offset);
>> +
>> +               data[id].ti_thermal =
>> +               devm_thermal_zone_of_sensor_register(dev, id,
>> +                                                    &data[id],
>> +                                                    &k3_of_thermal_ops);
>> +               if (IS_ERR(data[id].ti_thermal)) {
>> +                       dev_err(dev, "thermal zone device is NULL\n");
>> +                       ret = PTR_ERR(data[id].ti_thermal);
>> +                       goto err_alloc;
>> +               }
>> +
>> +               reg_cnt++;
>> +       }
>> +
>> +       platform_set_drvdata(pdev, bgp);
>> +
>> +       return 0;
>> +
>> +err_alloc:
>> +       pm_runtime_put_sync(&pdev->dev);
>> +       pm_runtime_disable(&pdev->dev);
>> +
>> +       return ret;
>> +}
>> +
>> +static int k3_bandgap_remove(struct platform_device *pdev)
>> +{
>> +       pm_runtime_put_sync(&pdev->dev);
>> +       pm_runtime_disable(&pdev->dev);
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct of_device_id of_k3_bandgap_match[] = {
>> +       {
>> +               .compatible = "ti,am654-vtm",
>> +       },
>> +       { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, of_k3_bandgap_match);
>> +
>> +static struct platform_driver k3_bandgap_sensor_driver = {
>> +       .probe = k3_bandgap_probe,
>> +       .remove = k3_bandgap_remove,
>> +       .driver = {
>> +               .name = "k3-soc-thermal",
>> +               .of_match_table = of_k3_bandgap_match,
>> +       },
>> +};
>> +
>> +module_platform_driver(k3_bandgap_sensor_driver);
>> +
>> +MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
>> --
>> 2.17.1
>>
diff mbox series

Patch

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 5a05db5438d6..1df434527f8d 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -251,6 +251,16 @@  config IMX_THERMAL
 	  cpufreq is used as the cooling device to throttle CPUs when the
 	  passive trip is crossed.
 
+config K3_THERMAL
+	tristate "Texas Instruments K3 thermal support"
+	depends on ARCH_K3 || COMPILE_TEST
+	help
+	  If you say yes here you get thermal support for the Texas Instruments
+	  K3 SoC family. The current chip supported is:
+	   - AM654
+
+	  This includes temperature reading functionality.
+
 config MAX77620_THERMAL
 	tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
 	depends on MFD_MAX77620
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 9fb88e26fb10..5ad6535139ae 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -28,6 +28,7 @@  thermal_sys-$(CONFIG_CLOCK_THERMAL)	+= clock_cooling.o
 # devfreq cooling
 thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
 
+obj-$(CONFIG_K3_THERMAL)	+= k3_bandgap.o
 # platform thermal drivers
 obj-y				+= broadcom/
 obj-$(CONFIG_THERMAL_MMIO)		+= thermal_mmio.o
diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c
new file mode 100644
index 000000000000..1d976af4461a
--- /dev/null
+++ b/drivers/thermal/k3_bandgap.c
@@ -0,0 +1,268 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI Bandgap temperature sensor driver for K3 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pm_runtime.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/thermal.h>
+#include <linux/of.h>
+
+#define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
+#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK	0xf
+#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
+#define K3_VTM_TMPSENS0_CTRL_OFFSET	0x80
+#define K3_VTM_REGS_PER_TS			0x10
+#define K3_VTM_TS_STAT_DTEMP_MASK	0x3ff
+#define K3_VTM_MAX_NUM_TS		8
+#define K3_VTM_TMPSENS_CTRL_CBIASSEL	BIT(0)
+#define K3_VTM_TMPSENS_CTRL_SOC		BIT(5)
+#define K3_VTM_TMPSENS_CTRL_CLRZ		BIT(6)
+#define K3_VTM_TMPSENS_CTRL_CLKON_REQ	BIT(7)
+
+#define K3_VTM_ADC_BEGIN_VAL		540
+#define K3_VTM_ADC_END_VAL		944
+
+static const int k3_adc_to_temp[] = {
+	-40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200,
+	-37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200,
+	-33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600,
+	-30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600,
+	-26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000,
+	-22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000,
+	-18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400,
+	-15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400,
+	-11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400,
+	-7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000,
+	-2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400,
+	1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600,
+	7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000,
+	11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400,
+	15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400,
+	19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800,
+	24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800,
+	28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900,
+	32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200,
+	36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200,
+	40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600,
+	45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600,
+	49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600,
+	53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000,
+	57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000,
+	61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000,
+	65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000,
+	69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400,
+	73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400,
+	77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400,
+	81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400,
+	85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400,
+	89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400,
+	93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500,
+	98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400,
+	101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000,
+	105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600,
+	109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200,
+	112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800,
+	116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400,
+	119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000,
+	123400, 123800, 124200, 124600, 124900, 125000,
+};
+
+struct k3_bandgap {
+	void __iomem *base;
+	const struct k3_bandgap_data *conf;
+};
+
+/* common data structures */
+struct k3_thermal_data {
+	struct thermal_zone_device *ti_thermal;
+	struct k3_bandgap *bgp;
+	int sensor_id;
+	u32 ctrl_offset;
+	u32 stat_offset;
+};
+
+static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
+				       unsigned int s2)
+{
+	int d01 = abs(s0 - s1);
+	int d02 = abs(s0 - s2);
+	int d12 = abs(s1 - s2);
+
+	if (d01 <= d02 && d01 <= d12)
+		return (s0 + s1) / 2;
+
+	if (d02 <= d01 && d02 <= d12)
+		return (s0 + s2) / 2;
+
+	return (s1 + s2) / 2;
+}
+
+static int k3_bgp_read_temp(struct k3_thermal_data *devdata,
+			    int *temp)
+{
+	struct k3_bandgap *bgp;
+	unsigned int dtemp, s0, s1, s2;
+
+	bgp = devdata->bgp;
+
+	/*
+	 * Errata is applicable for am654 pg 1.0 silicon. There
+	 * is a variation of the order for 8-10 degree centigrade.
+	 * Work around that by getting the average of two closest
+	 * readings out of three readings everytime we want to
+	 * report temperatures.
+	 *
+	 * Errata workaround.
+	 */
+	s0 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s1 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s2 = readl(bgp->base + devdata->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	dtemp = vtm_get_best_value(s0, s1, s2);
+
+	if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL)
+		return -EINVAL;
+
+	*temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL];
+
+	return 0;
+}
+
+static int k3_thermal_get_temp(void *devdata, int *temp)
+{
+	struct k3_thermal_data *data = devdata;
+	int ret = 0;
+
+	ret = k3_bgp_read_temp(data, temp);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+static const struct thermal_zone_of_device_ops k3_of_thermal_ops = {
+	.get_temp = k3_thermal_get_temp,
+};
+
+static const struct of_device_id of_k3_bandgap_match[];
+
+static int k3_bandgap_probe(struct platform_device *pdev)
+{
+	int ret = 0, cnt, val, id, reg_cnt = 0;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct k3_bandgap *bgp;
+	struct k3_thermal_data *data;
+
+	if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 -
+						K3_VTM_ADC_BEGIN_VAL))
+		return -EINVAL;
+
+	bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
+	if (!bgp)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bgp->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bgp->base))
+		return PTR_ERR(bgp->base);
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
+	/* Get the sensor count in the VTM */
+	val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
+	cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
+	cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
+
+	data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	/* Register the thermal sensors */
+	for (id = 0; id < cnt; id++) {
+		data[id].sensor_id = id;
+		data[id].bgp = bgp;
+		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET +
+					id * K3_VTM_REGS_PER_TS;
+		data[id].stat_offset = data[id].ctrl_offset + 0x8;
+
+		val = readl(data[id].bgp->base + data[id].ctrl_offset);
+		val |= (K3_VTM_TMPSENS_CTRL_SOC |
+			K3_VTM_TMPSENS_CTRL_CLRZ |
+			K3_VTM_TMPSENS_CTRL_CLKON_REQ);
+		val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL;
+		writel(val, data[id].bgp->base + data[id].ctrl_offset);
+
+		data[id].ti_thermal =
+		devm_thermal_zone_of_sensor_register(dev, id,
+						     &data[id],
+						     &k3_of_thermal_ops);
+		if (IS_ERR(data[id].ti_thermal)) {
+			dev_err(dev, "thermal zone device is NULL\n");
+			ret = PTR_ERR(data[id].ti_thermal);
+			goto err_alloc;
+		}
+
+		reg_cnt++;
+	}
+
+	platform_set_drvdata(pdev, bgp);
+
+	return 0;
+
+err_alloc:
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int k3_bandgap_remove(struct platform_device *pdev)
+{
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id of_k3_bandgap_match[] = {
+	{
+		.compatible = "ti,am654-vtm",
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_k3_bandgap_match);
+
+static struct platform_driver k3_bandgap_sensor_driver = {
+	.probe = k3_bandgap_probe,
+	.remove = k3_bandgap_remove,
+	.driver = {
+		.name = "k3-soc-thermal",
+		.of_match_table	= of_k3_bandgap_match,
+	},
+};
+
+module_platform_driver(k3_bandgap_sensor_driver);
+
+MODULE_DESCRIPTION("K3 bandgap temperature sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");