diff mbox series

[V3] clk: imx7ulp: make it easy to change ARM core clk

Message ID 1584347553-2654-1-git-send-email-peng.fan@nxp.com (mailing list archive)
State Awaiting Upstream, archived
Headers show
Series [V3] clk: imx7ulp: make it easy to change ARM core clk | expand

Commit Message

Peng Fan March 16, 2020, 8:32 a.m. UTC
From: Peng Fan <peng.fan@nxp.com>

ARM clk could only source from divcore or hsrun_divcore.

Follow what we already used on i.MX7D and i.MX8M SoCs, use
imx_clk_hw_cpu API. When ARM core is running normaly,
whether divcore or hwrun_divcore will finally source
from SPLL_PFD0. However SPLL_PFD0 is marked with CLK_SET_GATE,
so we need to disable SPLL_PFD0, when configure the rate.
So add CORE and HSRUN_CORE virtual clk to make it easy to
configure the clk using imx_clk_hw_cpu API.

Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no
need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk,
prograting it the parent with CLK_SET_RATE_PARENT will finally set
the SPLL_PFD0 clk.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V3:
 Update commit log. Make this a standalone patch from V2 
V2:
 https://patchwork.kernel.org/patch/11390595/
 No change

 drivers/clk/imx/clk-imx7ulp.c             | 6 ++++--
 include/dt-bindings/clock/imx7ulp-clock.h | 5 ++++-
 2 files changed, 8 insertions(+), 3 deletions(-)

Comments

Peng Fan April 10, 2020, 2:57 a.m. UTC | #1
> Subject: [PATCH V3] clk: imx7ulp: make it easy to change ARM core clk

This patch is important for us to support cpufreq on i.MX7ULP,
Could I have any A-b or R-b tags?

Thanks,
Peng.

> 
> From: Peng Fan <peng.fan@nxp.com>
> 
> ARM clk could only source from divcore or hsrun_divcore.
> 
> Follow what we already used on i.MX7D and i.MX8M SoCs, use
> imx_clk_hw_cpu API. When ARM core is running normaly, whether divcore or
> hwrun_divcore will finally source from SPLL_PFD0. However SPLL_PFD0 is
> marked with CLK_SET_GATE, so we need to disable SPLL_PFD0, when
> configure the rate.
> So add CORE and HSRUN_CORE virtual clk to make it easy to configure the clk
> using imx_clk_hw_cpu API.
> 
> Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no
> need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk,
> prograting it the parent with CLK_SET_RATE_PARENT will finally set the
> SPLL_PFD0 clk.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> 
> V3:
>  Update commit log. Make this a standalone patch from V2
> V2:
>  https://patchwork.kernel.org/patch/11390595/
>  No change
> 
>  drivers/clk/imx/clk-imx7ulp.c             | 6 ++++--
>  include/dt-bindings/clock/imx7ulp-clock.h | 5 ++++-
>  2 files changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
> index 3710aa0dee9b..634c0b6636b0 100644
> --- a/drivers/clk/imx/clk-imx7ulp.c
> +++ b/drivers/clk/imx/clk-imx7ulp.c
> @@ -29,7 +29,7 @@ static const char * const ddr_sels[]		=
> { "apll_pfd_sel", "dummy", "dummy", "dum
>  static const char * const nic_sels[]		= { "firc", "ddr_clk", };
>  static const char * const periph_plat_sels[]	= { "dummy", "nic1_bus_clk",
> "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
>  static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk",
> "dummy", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
> -static const char * const arm_sels[]		= { "divcore", "dummy", "dummy",
> "hsrun_divcore", };
> +static const char * const arm_sels[]		= { "core", "dummy", "dummy",
> "hsrun_core", };
> 
>  /* used by sosc/sirc/firc/ddr/spll/apll dividers */  static const struct
> clk_div_table ulp_div_table[] = { @@ -121,7 +121,9 @@ static void __init
> imx7ulp_clk_scg1_init(struct device_node *np)
>  	hws[IMX7ULP_CLK_DDR_SEL]	= imx_clk_hw_mux_flags("ddr_sel",
> base + 0x30, 24, 2, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT |
> CLK_OPS_PARENT_ENABLE);
> 
>  	hws[IMX7ULP_CLK_CORE_DIV]	= imx_clk_hw_divider_flags("divcore",
> 	"scs_sel",  base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
> +	hws[IMX7ULP_CLK_CORE]		= imx_clk_hw_cpu("core", "divcore",
> hws[IMX7ULP_CLK_CORE_DIV]->clk, hws[IMX7ULP_CLK_SYS_SEL]->clk,
> hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
>  	hws[IMX7ULP_CLK_HSRUN_CORE_DIV] =
> imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16,
> 4, CLK_SET_RATE_PARENT);
> +	hws[IMX7ULP_CLK_HSRUN_CORE] = imx_clk_hw_cpu("hsrun_core",
> +"hsrun_divcore", hws[IMX7ULP_CLK_HSRUN_CORE_DIV]->clk,
> +hws[IMX7ULP_CLK_HSRUN_SYS_SEL]->clk,
> hws[IMX7ULP_CLK_SPLL_SEL]->clk,
> +hws[IMX7ULP_CLK_FIRC]->clk);
> 
>  	hws[IMX7ULP_CLK_DDR_DIV]	= imx_clk_hw_divider_gate("ddr_clk",
> "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
>  							       0, ulp_div_table, &imx_ccm_lock);
> @@ -270,7 +272,7 @@ static void __init imx7ulp_clk_smc1_init(struct
> device_node *np)
>  	base = of_iomap(np, 0);
>  	WARN_ON(!base);
> 
> -	hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10,
> 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_IS_CRITICAL);
> +	hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10,
> 8, 2,
> +arm_sels, ARRAY_SIZE(arm_sels), CLK_SET_RATE_PARENT);
> 
>  	imx_check_clk_hws(hws, clk_data->num);
> 
> diff --git a/include/dt-bindings/clock/imx7ulp-clock.h
> b/include/dt-bindings/clock/imx7ulp-clock.h
> index 38145bdcd975..b58370d146e2 100644
> --- a/include/dt-bindings/clock/imx7ulp-clock.h
> +++ b/include/dt-bindings/clock/imx7ulp-clock.h
> @@ -58,7 +58,10 @@
>  #define IMX7ULP_CLK_HSRUN_SYS_SEL	44
>  #define IMX7ULP_CLK_HSRUN_CORE_DIV	45
> 
> -#define IMX7ULP_CLK_SCG1_END		46
> +#define IMX7ULP_CLK_CORE		46
> +#define IMX7ULP_CLK_HSRUN_CORE		47
> +
> +#define IMX7ULP_CLK_SCG1_END		48
> 
>  /* PCC2 */
>  #define IMX7ULP_CLK_DMA1		0
> --
> 2.16.4
Abel Vesa April 14, 2020, 8:54 a.m. UTC | #2
On 20-03-16 16:32:33, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> ARM clk could only source from divcore or hsrun_divcore.
> 
> Follow what we already used on i.MX7D and i.MX8M SoCs, use
> imx_clk_hw_cpu API. When ARM core is running normaly,
> whether divcore or hwrun_divcore will finally source
> from SPLL_PFD0. However SPLL_PFD0 is marked with CLK_SET_GATE,
> so we need to disable SPLL_PFD0, when configure the rate.
> So add CORE and HSRUN_CORE virtual clk to make it easy to
> configure the clk using imx_clk_hw_cpu API.
> 
> Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no
> need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk,
> prograting it the parent with CLK_SET_RATE_PARENT will finally set
> the SPLL_PFD0 clk.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>

> ---
> 
> V3:
>  Update commit log. Make this a standalone patch from V2 
> V2:
>  https://patchwork.kernel.org/patch/11390595/
>  No change
> 
>  drivers/clk/imx/clk-imx7ulp.c             | 6 ++++--
>  include/dt-bindings/clock/imx7ulp-clock.h | 5 ++++-
>  2 files changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
> index 3710aa0dee9b..634c0b6636b0 100644
> --- a/drivers/clk/imx/clk-imx7ulp.c
> +++ b/drivers/clk/imx/clk-imx7ulp.c
> @@ -29,7 +29,7 @@ static const char * const ddr_sels[]		= { "apll_pfd_sel", "dummy", "dummy", "dum
>  static const char * const nic_sels[]		= { "firc", "ddr_clk", };
>  static const char * const periph_plat_sels[]	= { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
>  static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk", "dummy", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
> -static const char * const arm_sels[]		= { "divcore", "dummy", "dummy", "hsrun_divcore", };
> +static const char * const arm_sels[]		= { "core", "dummy", "dummy", "hsrun_core", };
>  
>  /* used by sosc/sirc/firc/ddr/spll/apll dividers */
>  static const struct clk_div_table ulp_div_table[] = {
> @@ -121,7 +121,9 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
>  	hws[IMX7ULP_CLK_DDR_SEL]	= imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 2, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
>  
>  	hws[IMX7ULP_CLK_CORE_DIV]	= imx_clk_hw_divider_flags("divcore",	"scs_sel",  base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
> +	hws[IMX7ULP_CLK_CORE]		= imx_clk_hw_cpu("core", "divcore", hws[IMX7ULP_CLK_CORE_DIV]->clk, hws[IMX7ULP_CLK_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
>  	hws[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
> +	hws[IMX7ULP_CLK_HSRUN_CORE] = imx_clk_hw_cpu("hsrun_core", "hsrun_divcore", hws[IMX7ULP_CLK_HSRUN_CORE_DIV]->clk, hws[IMX7ULP_CLK_HSRUN_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
>  
>  	hws[IMX7ULP_CLK_DDR_DIV]	= imx_clk_hw_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
>  							       0, ulp_div_table, &imx_ccm_lock);
> @@ -270,7 +272,7 @@ static void __init imx7ulp_clk_smc1_init(struct device_node *np)
>  	base = of_iomap(np, 0);
>  	WARN_ON(!base);
>  
> -	hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_IS_CRITICAL);
> +	hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_SET_RATE_PARENT);
>  
>  	imx_check_clk_hws(hws, clk_data->num);
>  
> diff --git a/include/dt-bindings/clock/imx7ulp-clock.h b/include/dt-bindings/clock/imx7ulp-clock.h
> index 38145bdcd975..b58370d146e2 100644
> --- a/include/dt-bindings/clock/imx7ulp-clock.h
> +++ b/include/dt-bindings/clock/imx7ulp-clock.h
> @@ -58,7 +58,10 @@
>  #define IMX7ULP_CLK_HSRUN_SYS_SEL	44
>  #define IMX7ULP_CLK_HSRUN_CORE_DIV	45
>  
> -#define IMX7ULP_CLK_SCG1_END		46
> +#define IMX7ULP_CLK_CORE		46
> +#define IMX7ULP_CLK_HSRUN_CORE		47
> +
> +#define IMX7ULP_CLK_SCG1_END		48
>  
>  /* PCC2 */
>  #define IMX7ULP_CLK_DMA1		0
> -- 
> 2.16.4
>
Shawn Guo April 14, 2020, 1:36 p.m. UTC | #3
On Mon, Mar 16, 2020 at 04:32:33PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> ARM clk could only source from divcore or hsrun_divcore.
> 
> Follow what we already used on i.MX7D and i.MX8M SoCs, use
> imx_clk_hw_cpu API. When ARM core is running normaly,
> whether divcore or hwrun_divcore will finally source
> from SPLL_PFD0. However SPLL_PFD0 is marked with CLK_SET_GATE,
> so we need to disable SPLL_PFD0, when configure the rate.
> So add CORE and HSRUN_CORE virtual clk to make it easy to
> configure the clk using imx_clk_hw_cpu API.
> 
> Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no
> need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk,
> prograting it the parent with CLK_SET_RATE_PARENT will finally set
> the SPLL_PFD0 clk.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
index 3710aa0dee9b..634c0b6636b0 100644
--- a/drivers/clk/imx/clk-imx7ulp.c
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -29,7 +29,7 @@  static const char * const ddr_sels[]		= { "apll_pfd_sel", "dummy", "dummy", "dum
 static const char * const nic_sels[]		= { "firc", "ddr_clk", };
 static const char * const periph_plat_sels[]	= { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
 static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk", "dummy", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
-static const char * const arm_sels[]		= { "divcore", "dummy", "dummy", "hsrun_divcore", };
+static const char * const arm_sels[]		= { "core", "dummy", "dummy", "hsrun_core", };
 
 /* used by sosc/sirc/firc/ddr/spll/apll dividers */
 static const struct clk_div_table ulp_div_table[] = {
@@ -121,7 +121,9 @@  static void __init imx7ulp_clk_scg1_init(struct device_node *np)
 	hws[IMX7ULP_CLK_DDR_SEL]	= imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 2, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
 
 	hws[IMX7ULP_CLK_CORE_DIV]	= imx_clk_hw_divider_flags("divcore",	"scs_sel",  base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
+	hws[IMX7ULP_CLK_CORE]		= imx_clk_hw_cpu("core", "divcore", hws[IMX7ULP_CLK_CORE_DIV]->clk, hws[IMX7ULP_CLK_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
 	hws[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
+	hws[IMX7ULP_CLK_HSRUN_CORE] = imx_clk_hw_cpu("hsrun_core", "hsrun_divcore", hws[IMX7ULP_CLK_HSRUN_CORE_DIV]->clk, hws[IMX7ULP_CLK_HSRUN_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
 
 	hws[IMX7ULP_CLK_DDR_DIV]	= imx_clk_hw_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
 							       0, ulp_div_table, &imx_ccm_lock);
@@ -270,7 +272,7 @@  static void __init imx7ulp_clk_smc1_init(struct device_node *np)
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 
-	hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_IS_CRITICAL);
+	hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_SET_RATE_PARENT);
 
 	imx_check_clk_hws(hws, clk_data->num);
 
diff --git a/include/dt-bindings/clock/imx7ulp-clock.h b/include/dt-bindings/clock/imx7ulp-clock.h
index 38145bdcd975..b58370d146e2 100644
--- a/include/dt-bindings/clock/imx7ulp-clock.h
+++ b/include/dt-bindings/clock/imx7ulp-clock.h
@@ -58,7 +58,10 @@ 
 #define IMX7ULP_CLK_HSRUN_SYS_SEL	44
 #define IMX7ULP_CLK_HSRUN_CORE_DIV	45
 
-#define IMX7ULP_CLK_SCG1_END		46
+#define IMX7ULP_CLK_CORE		46
+#define IMX7ULP_CLK_HSRUN_CORE		47
+
+#define IMX7ULP_CLK_SCG1_END		48
 
 /* PCC2 */
 #define IMX7ULP_CLK_DMA1		0