| Message ID | 8a9ca8e08d7c4957789a209c77589f1aa4bd2f06.1585297723.git.joglekar@synopsys.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add logic to consolidate TRBs for Synopsys xHC | expand |
On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote: > This commit adds the documentation for consolidate-sgl, and > snps,consolidate-sgl property. These when set enables the quirk for > XHCI driver for consolidation of sg list into a temporary buffer when small > buffer sizes are scattered over the sg list not making up to MPS or total > transfer size within TRB cache size with Synopsys xHC. > > Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> > --- > Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ > Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ > 2 files changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > index 9946ff9ba735..292d1f7969e4 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -104,6 +104,9 @@ Optional properties: > this and tx-thr-num-pkt-prd to a valid, non-zero value > 1-16 (DWC_usb31 programming guide section 1.2.3) to > enable periodic ESS TX threshold. > + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use > + SG buffers of at least MPS size by consolidating smaller SG > + buffers list into a single buffer. > > - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. > - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 > diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt > index 3f378951d624..a90d853557ee 100644 > --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt > +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt > @@ -43,6 +43,9 @@ Optional properties: > - quirk-broken-port-ped: set if the controller has broken port disable mechanism > - imod-interval-ns: default interrupt moderation interval is 5000ns > - phys : see usb-hcd.yaml in the current directory > + - consolidate-sgl: indicate if you need to consolidate sg list into a > + temporary buffer when small SG buffer sizes does not make upto MPS > + size or total transfer size across the TRB cache size. Shouldn't this refer to the fact that the hardware is broken? Otherwise why would anyone know if they should, or should not, enable this option? thanks, greg k-h
Hi, On 3/27/2020 3:24 PM, Greg KH wrote: > On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote: >> This commit adds the documentation for consolidate-sgl, and >> snps,consolidate-sgl property. These when set enables the quirk for >> XHCI driver for consolidation of sg list into a temporary buffer when small >> buffer sizes are scattered over the sg list not making up to MPS or total >> transfer size within TRB cache size with Synopsys xHC. >> >> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> >> --- >> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ >> Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ >> 2 files changed, 6 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >> index 9946ff9ba735..292d1f7969e4 100644 >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >> @@ -104,6 +104,9 @@ Optional properties: >> this and tx-thr-num-pkt-prd to a valid, non-zero value >> 1-16 (DWC_usb31 programming guide section 1.2.3) to >> enable periodic ESS TX threshold. >> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use >> + SG buffers of at least MPS size by consolidating smaller SG >> + buffers list into a single buffer. >> >> - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. >> - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 >> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt >> index 3f378951d624..a90d853557ee 100644 >> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt >> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt >> @@ -43,6 +43,9 @@ Optional properties: >> - quirk-broken-port-ped: set if the controller has broken port disable mechanism >> - imod-interval-ns: default interrupt moderation interval is 5000ns >> - phys : see usb-hcd.yaml in the current directory >> + - consolidate-sgl: indicate if you need to consolidate sg list into a >> + temporary buffer when small SG buffer sizes does not make upto MPS >> + size or total transfer size across the TRB cache size. > > Shouldn't this refer to the fact that the hardware is broken? Otherwise > why would anyone know if they should, or should not, enable this option? > We have not seen issue with Linux environment for now. But with other OS with SG list with very small buffer sizes the xHC controller hang was seen. So currently introducing the binding as optional one. One could enable this option when xHC halt happens due to small SG list sizes. > thanks, > > greg k-h > Thanks & Regards, Tejas Joglekar
On Fri, Mar 27, 2020 at 10:11:59AM +0000, Tejas Joglekar wrote: > Hi, > On 3/27/2020 3:24 PM, Greg KH wrote: > > On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote: > >> This commit adds the documentation for consolidate-sgl, and > >> snps,consolidate-sgl property. These when set enables the quirk for > >> XHCI driver for consolidation of sg list into a temporary buffer when small > >> buffer sizes are scattered over the sg list not making up to MPS or total > >> transfer size within TRB cache size with Synopsys xHC. > >> > >> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> > >> --- > >> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ > >> Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ > >> 2 files changed, 6 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > >> index 9946ff9ba735..292d1f7969e4 100644 > >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt > >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > >> @@ -104,6 +104,9 @@ Optional properties: > >> this and tx-thr-num-pkt-prd to a valid, non-zero value > >> 1-16 (DWC_usb31 programming guide section 1.2.3) to > >> enable periodic ESS TX threshold. > >> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use > >> + SG buffers of at least MPS size by consolidating smaller SG > >> + buffers list into a single buffer. > >> > >> - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. > >> - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 > >> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt > >> index 3f378951d624..a90d853557ee 100644 > >> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt > >> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt > >> @@ -43,6 +43,9 @@ Optional properties: > >> - quirk-broken-port-ped: set if the controller has broken port disable mechanism > >> - imod-interval-ns: default interrupt moderation interval is 5000ns > >> - phys : see usb-hcd.yaml in the current directory > >> + - consolidate-sgl: indicate if you need to consolidate sg list into a > >> + temporary buffer when small SG buffer sizes does not make upto MPS > >> + size or total transfer size across the TRB cache size. > > > > Shouldn't this refer to the fact that the hardware is broken? Otherwise > > why would anyone know if they should, or should not, enable this option? > > > We have not seen issue with Linux environment for now. But with other OS with > SG list with very small buffer sizes the xHC controller hang was seen. So > currently introducing the binding as optional one. One could enable this > option when xHC halt happens due to small SG list sizes. What I mean is this should be something like, "quirk-broken-sg-list-handler" or something like that. Otherwise how does anyone know if this really is needed or not. Reading this would seem like everyone would like to do this, as consolidating links sounds like a good optimization, when instead this really cause more memory allocations, making this possibly worse performance. thanks, greg k-h
On 3/27/2020 3:54 PM, Greg KH wrote: > On Fri, Mar 27, 2020 at 10:11:59AM +0000, Tejas Joglekar wrote: >> Hi, >> On 3/27/2020 3:24 PM, Greg KH wrote: >>> On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote: >>>> This commit adds the documentation for consolidate-sgl, and >>>> snps,consolidate-sgl property. These when set enables the quirk for >>>> XHCI driver for consolidation of sg list into a temporary buffer when small >>>> buffer sizes are scattered over the sg list not making up to MPS or total >>>> transfer size within TRB cache size with Synopsys xHC. >>>> >>>> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> >>>> --- >>>> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ >>>> Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ >>>> 2 files changed, 6 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>> index 9946ff9ba735..292d1f7969e4 100644 >>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>> @@ -104,6 +104,9 @@ Optional properties: >>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>> enable periodic ESS TX threshold. >>>> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use >>>> + SG buffers of at least MPS size by consolidating smaller SG >>>> + buffers list into a single buffer. >>>> >>>> - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. >>>> - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 >>>> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt >>>> index 3f378951d624..a90d853557ee 100644 >>>> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt >>>> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt >>>> @@ -43,6 +43,9 @@ Optional properties: >>>> - quirk-broken-port-ped: set if the controller has broken port disable mechanism >>>> - imod-interval-ns: default interrupt moderation interval is 5000ns >>>> - phys : see usb-hcd.yaml in the current directory >>>> + - consolidate-sgl: indicate if you need to consolidate sg list into a >>>> + temporary buffer when small SG buffer sizes does not make upto MPS >>>> + size or total transfer size across the TRB cache size. >>> >>> Shouldn't this refer to the fact that the hardware is broken? Otherwise >>> why would anyone know if they should, or should not, enable this option? >>> >> We have not seen issue with Linux environment for now. But with other OS with >> SG list with very small buffer sizes the xHC controller hang was seen. So >> currently introducing the binding as optional one. One could enable this >> option when xHC halt happens due to small SG list sizes. > > What I mean is this should be something like, > "quirk-broken-sg-list-handler" or something like that. Otherwise how > does anyone know if this really is needed or not. Reading this would > seem like everyone would like to do this, as consolidating links > sounds like a good optimization, when instead this really cause more > memory allocations, making this possibly worse performance. > Sure, understood. I will rename this entry. > thanks, > > greg k-h > Thanks & Regards, Tejas Joglekar
On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote: > This commit adds the documentation for consolidate-sgl, and > snps,consolidate-sgl property. These when set enables the quirk for > XHCI driver for consolidation of sg list into a temporary buffer when small > buffer sizes are scattered over the sg list not making up to MPS or total > transfer size within TRB cache size with Synopsys xHC. > > Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> > --- > Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ > Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ > 2 files changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > index 9946ff9ba735..292d1f7969e4 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -104,6 +104,9 @@ Optional properties: > this and tx-thr-num-pkt-prd to a valid, non-zero value > 1-16 (DWC_usb31 programming guide section 1.2.3) to > enable periodic ESS TX threshold. > + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use > + SG buffers of at least MPS size by consolidating smaller SG > + buffers list into a single buffer. The preference is not to keep adding properties for every single quirk or feature. These should be implied by specific compatibles. As Synopsys knows what quirks/errata/features are in each version of IP, the compatible strings should reflect those versions. (And yes, I'm sure there's customer ECO fixes that aren't reflected in the version, but that's why we have SoC specific compatibles too.) This is the only way we can fix quirks in the OS without doing DT updates. For comparison, do you want to have to update your PC BIOS so an OS can work-around issues? Rob
Hi, On 4/5/2020 7:15 AM, Rob Herring wrote: > On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote: >> This commit adds the documentation for consolidate-sgl, and >> snps,consolidate-sgl property. These when set enables the quirk for >> XHCI driver for consolidation of sg list into a temporary buffer when small >> buffer sizes are scattered over the sg list not making up to MPS or total >> transfer size within TRB cache size with Synopsys xHC. >> >> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> >> --- >> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ >> Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ >> 2 files changed, 6 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >> index 9946ff9ba735..292d1f7969e4 100644 >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >> @@ -104,6 +104,9 @@ Optional properties: >> this and tx-thr-num-pkt-prd to a valid, non-zero value >> 1-16 (DWC_usb31 programming guide section 1.2.3) to >> enable periodic ESS TX threshold. >> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use >> + SG buffers of at least MPS size by consolidating smaller SG >> + buffers list into a single buffer. > > The preference is not to keep adding properties for every single quirk > or feature. These should be implied by specific compatibles. As Synopsys > knows what quirks/errata/features are in each version of IP, the > compatible strings should reflect those versions. (And yes, I'm sure > there's customer ECO fixes that aren't reflected in the version, but > that's why we have SoC specific compatibles too.) This is the only way > we can fix quirks in the OS without doing DT updates. For comparison, do > you want to have to update your PC BIOS so an OS can work-around issues? > Yes, I understand what you want to say here. But I think this compatible string does not work with the platform drivers with PCI based systems. So based on the vendor id and device id then I need to set the quirk required. @Felipe: What do you suggest for setting up quirk without the DT update for dwc3? > Rob > Thanks & Regards, Tejas Joglekar
Hi, Tejas Joglekar <Tejas.Joglekar@synopsys.com> writes: > Hi, > On 4/5/2020 7:15 AM, Rob Herring wrote: >> On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote: >>> This commit adds the documentation for consolidate-sgl, and >>> snps,consolidate-sgl property. These when set enables the quirk for >>> XHCI driver for consolidation of sg list into a temporary buffer when small >>> buffer sizes are scattered over the sg list not making up to MPS or total >>> transfer size within TRB cache size with Synopsys xHC. >>> >>> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> >>> --- >>> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ >>> Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ >>> 2 files changed, 6 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>> index 9946ff9ba735..292d1f7969e4 100644 >>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>> @@ -104,6 +104,9 @@ Optional properties: >>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>> enable periodic ESS TX threshold. >>> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use >>> + SG buffers of at least MPS size by consolidating smaller SG >>> + buffers list into a single buffer. >> >> The preference is not to keep adding properties for every single quirk >> or feature. These should be implied by specific compatibles. As Synopsys >> knows what quirks/errata/features are in each version of IP, the >> compatible strings should reflect those versions. (And yes, I'm sure >> there's customer ECO fixes that aren't reflected in the version, but >> that's why we have SoC specific compatibles too.) This is the only way >> we can fix quirks in the OS without doing DT updates. For comparison, do >> you want to have to update your PC BIOS so an OS can work-around issues? >> > Yes, I understand what you want to say here. But I think this compatible string > does not work with the platform drivers with PCI based systems. So based on the vendor > id and device id then I need to set the quirk required. > > @Felipe: What do you suggest for setting up quirk without the DT update for dwc3? We have been using Synopsys controller's revision register, but that's not visible to xhci driver and we don't have a separate compatible for each synopsys version on the xhci driver side. One option would be to add "snps,xhci-foo-bar" to xhci-plat and use that.
Hi, On 4/16/2020 1:52 PM, Felipe Balbi wrote: > > Hi, > > Tejas Joglekar <Tejas.Joglekar@synopsys.com> writes: >> Hi, >> On 4/5/2020 7:15 AM, Rob Herring wrote: >>> On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote: >>>> This commit adds the documentation for consolidate-sgl, and >>>> snps,consolidate-sgl property. These when set enables the quirk for >>>> XHCI driver for consolidation of sg list into a temporary buffer when small >>>> buffer sizes are scattered over the sg list not making up to MPS or total >>>> transfer size within TRB cache size with Synopsys xHC. >>>> >>>> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> >>>> --- >>>> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ >>>> Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ >>>> 2 files changed, 6 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>> index 9946ff9ba735..292d1f7969e4 100644 >>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>> @@ -104,6 +104,9 @@ Optional properties: >>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>> enable periodic ESS TX threshold. >>>> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use >>>> + SG buffers of at least MPS size by consolidating smaller SG >>>> + buffers list into a single buffer. >>> >>> The preference is not to keep adding properties for every single quirk >>> or feature. These should be implied by specific compatibles. As Synopsys >>> knows what quirks/errata/features are in each version of IP, the >>> compatible strings should reflect those versions. (And yes, I'm sure >>> there's customer ECO fixes that aren't reflected in the version, but >>> that's why we have SoC specific compatibles too.) This is the only way >>> we can fix quirks in the OS without doing DT updates. For comparison, do >>> you want to have to update your PC BIOS so an OS can work-around issues? >>> >> Yes, I understand what you want to say here. But I think this compatible string >> does not work with the platform drivers with PCI based systems. So based on the vendor >> id and device id then I need to set the quirk required. >> >> @Felipe: What do you suggest for setting up quirk without the DT update for dwc3? > > We have been using Synopsys controller's revision register, but that's > not visible to xhci driver and we don't have a separate compatible for > each synopsys version on the xhci driver side. One option would be to > add "snps,xhci-foo-bar" to xhci-plat and use that. > @Felipe: Thanks for suggestion @Mathias: Do you prefer parameter passed this way? I can send the v2 patch set, after your input. Thanks & Regards, Tejas Joglekar
On 16.4.2020 19.37, Tejas Joglekar wrote: > Hi, > On 4/16/2020 1:52 PM, Felipe Balbi wrote: >> >> Hi, >> >> Tejas Joglekar <Tejas.Joglekar@synopsys.com> writes: >>> Hi, >>> On 4/5/2020 7:15 AM, Rob Herring wrote: >>>> On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote: >>>>> This commit adds the documentation for consolidate-sgl, and >>>>> snps,consolidate-sgl property. These when set enables the quirk for >>>>> XHCI driver for consolidation of sg list into a temporary buffer when small >>>>> buffer sizes are scattered over the sg list not making up to MPS or total >>>>> transfer size within TRB cache size with Synopsys xHC. >>>>> >>>>> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> >>>>> --- >>>>> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ >>>>> Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ >>>>> 2 files changed, 6 insertions(+) >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>> index 9946ff9ba735..292d1f7969e4 100644 >>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>>> @@ -104,6 +104,9 @@ Optional properties: >>>>> this and tx-thr-num-pkt-prd to a valid, non-zero value >>>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to >>>>> enable periodic ESS TX threshold. >>>>> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use >>>>> + SG buffers of at least MPS size by consolidating smaller SG >>>>> + buffers list into a single buffer. >>>> >>>> The preference is not to keep adding properties for every single quirk >>>> or feature. These should be implied by specific compatibles. As Synopsys >>>> knows what quirks/errata/features are in each version of IP, the >>>> compatible strings should reflect those versions. (And yes, I'm sure >>>> there's customer ECO fixes that aren't reflected in the version, but >>>> that's why we have SoC specific compatibles too.) This is the only way >>>> we can fix quirks in the OS without doing DT updates. For comparison, do >>>> you want to have to update your PC BIOS so an OS can work-around issues? >>>> >>> Yes, I understand what you want to say here. But I think this compatible string >>> does not work with the platform drivers with PCI based systems. So based on the vendor >>> id and device id then I need to set the quirk required. >>> >>> @Felipe: What do you suggest for setting up quirk without the DT update for dwc3? >> >> We have been using Synopsys controller's revision register, but that's >> not visible to xhci driver and we don't have a separate compatible for >> each synopsys version on the xhci driver side. One option would be to >> add "snps,xhci-foo-bar" to xhci-plat and use that. >> > @Felipe: Thanks for suggestion > > @Mathias: Do you prefer parameter passed this way? I can send the v2 patch set, > after your input. should work, I don't see any issues with that. -Mathias
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 9946ff9ba735..292d1f7969e4 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -104,6 +104,9 @@ Optional properties: this and tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 programming guide section 1.2.3) to enable periodic ESS TX threshold. + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use + SG buffers of at least MPS size by consolidating smaller SG + buffers list into a single buffer. - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 3f378951d624..a90d853557ee 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -43,6 +43,9 @@ Optional properties: - quirk-broken-port-ped: set if the controller has broken port disable mechanism - imod-interval-ns: default interrupt moderation interval is 5000ns - phys : see usb-hcd.yaml in the current directory + - consolidate-sgl: indicate if you need to consolidate sg list into a + temporary buffer when small SG buffer sizes does not make upto MPS + size or total transfer size across the TRB cache size. additionally the properties from usb-hcd.yaml (in the current directory) are supported.
This commit adds the documentation for consolidate-sgl, and snps,consolidate-sgl property. These when set enables the quirk for XHCI driver for consolidation of sg list into a temporary buffer when small buffer sizes are scattered over the sg list not making up to MPS or total transfer size within TRB cache size with Synopsys xHC. Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> --- Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++ 2 files changed, 6 insertions(+)