diff mbox series

[v6,6/7] ASoC: dt-bindings: fsl_easrc: Add document for EASRC

Message ID 68208297b49e85adfddf843bc205d154790a49de.1585726761.git.shengjiu.wang@nxp.com (mailing list archive)
State New, archived
Headers show
Series ASoC: Add new module driver for new ASRC | expand

Commit Message

Shengjiu Wang April 1, 2020, 8:45 a.m. UTC 
EASRC (Enhanced Asynchronous Sample Rate Converter) is a new
IP module found on i.MX8MN.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 .../devicetree/bindings/sound/fsl,easrc.yaml  | 101 ++++++++++++++++++
 1 file changed, 101 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml

Comments

Rob Herring April 14, 2020, 3:46 p.m. UTC | #1 
On Wed, Apr 01, 2020 at 04:45:39PM +0800, Shengjiu Wang wrote:
> EASRC (Enhanced Asynchronous Sample Rate Converter) is a new
> IP module found on i.MX8MN.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---
>  .../devicetree/bindings/sound/fsl,easrc.yaml  | 101 ++++++++++++++++++
>  1 file changed, 101 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> new file mode 100644
> index 000000000000..14ea60084420
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
> +
> +maintainers:
> +  - Shengjiu Wang <shengjiu.wang@nxp.com>
> +
> +properties:
> +  $nodename:
> +    pattern: "^easrc@.*"
> +
> +  compatible:
> +    const: fsl,imx8mn-easrc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Peripheral clock
> +
> +  clock-names:
> +    items:
> +      - const: mem
> +
> +  dmas:
> +    maxItems: 8
> +
> +  dma-names:
> +    items:
> +      - const: ctx0_rx
> +      - const: ctx0_tx
> +      - const: ctx1_rx
> +      - const: ctx1_tx
> +      - const: ctx2_rx
> +      - const: ctx2_tx
> +      - const: ctx3_rx
> +      - const: ctx3_tx
> +
> +  firmware-name:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/string
> +      - const: imx/easrc/easrc-imx8mn.bin
> +    description: The coefficient table for the filters
> +
> +  fsl,asrc-rate:

fsl,asrc-rate-hz

> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32

And then you can drop this.

> +      - minimum: 8000
> +      - maximum: 192000
> +    description: Defines a mutual sample rate used by DPCM Back Ends
> +
> +  fsl,asrc-format:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [2, 6, 10, 32, 36]
> +        default: 2
> +    description:
> +      Defines a mutual sample format used by DPCM Back Ends
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - dmas
> +  - dma-names
> +  - firmware-name
> +  - fsl,asrc-rate
> +  - fsl,asrc-format
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mn-clock.h>
> +
> +    easrc: easrc@300C0000 {

Lowercase hex

> +           compatible = "fsl,imx8mn-easrc";
> +           reg = <0x0 0x300C0000 0x0 0x10000>;
> +           interrupts = <0x0 122 0x4>;
> +           clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
> +           clock-names = "mem";
> +           dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
> +                  <&sdma2 18 23 0> , <&sdma2 19 23 0>,
> +                  <&sdma2 20 23 0> , <&sdma2 21 23 0>,
> +                  <&sdma2 22 23 0> , <&sdma2 23 23 0>;
> +           dma-names = "ctx0_rx", "ctx0_tx",
> +                       "ctx1_rx", "ctx1_tx",
> +                       "ctx2_rx", "ctx2_tx",
> +                       "ctx3_rx", "ctx3_tx";
> +           firmware-name = "imx/easrc/easrc-imx8mn.bin";
> +           fsl,asrc-rate  = <8000>;
> +           fsl,asrc-format = <2>;
> +    };
> -- 
> 2.21.0
>
Shengjiu Wang April 15, 2020, 2:55 a.m. UTC | #2 
Hi Rob

On Tue, Apr 14, 2020 at 11:49 PM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Apr 01, 2020 at 04:45:39PM +0800, Shengjiu Wang wrote:
> > EASRC (Enhanced Asynchronous Sample Rate Converter) is a new
> > IP module found on i.MX8MN.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > ---
> >  .../devicetree/bindings/sound/fsl,easrc.yaml  | 101 ++++++++++++++++++
> >  1 file changed, 101 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> > new file mode 100644
> > index 000000000000..14ea60084420
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> > @@ -0,0 +1,101 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
> > +
> > +maintainers:
> > +  - Shengjiu Wang <shengjiu.wang@nxp.com>
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^easrc@.*"
> > +
> > +  compatible:
> > +    const: fsl,imx8mn-easrc
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Peripheral clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: mem
> > +
> > +  dmas:
> > +    maxItems: 8
> > +
> > +  dma-names:
> > +    items:
> > +      - const: ctx0_rx
> > +      - const: ctx0_tx
> > +      - const: ctx1_rx
> > +      - const: ctx1_tx
> > +      - const: ctx2_rx
> > +      - const: ctx2_tx
> > +      - const: ctx3_rx
> > +      - const: ctx3_tx
> > +
> > +  firmware-name:
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#/definitions/string
> > +      - const: imx/easrc/easrc-imx8mn.bin
> > +    description: The coefficient table for the filters
> > +
> > +  fsl,asrc-rate:
>
> fsl,asrc-rate-hz

Can we keep "fsl,asrc-rate", because I want this property
align with the one in fsl,asrc.txt.  These two asrc modules
can share same property name.

best regards
wang shengjiu
Rob Herring April 15, 2020, 2:11 p.m. UTC | #3 
On Tue, Apr 14, 2020 at 9:56 PM Shengjiu Wang <shengjiu.wang@gmail.com> wrote:
>
> Hi Rob
>
> On Tue, Apr 14, 2020 at 11:49 PM Rob Herring <robh@kernel.org> wrote:
> >
> > On Wed, Apr 01, 2020 at 04:45:39PM +0800, Shengjiu Wang wrote:
> > > EASRC (Enhanced Asynchronous Sample Rate Converter) is a new
> > > IP module found on i.MX8MN.
> > >
> > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > > ---
> > >  .../devicetree/bindings/sound/fsl,easrc.yaml  | 101 ++++++++++++++++++
> > >  1 file changed, 101 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> > > new file mode 100644
> > > index 000000000000..14ea60084420
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> > > @@ -0,0 +1,101 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
> > > +
> > > +maintainers:
> > > +  - Shengjiu Wang <shengjiu.wang@nxp.com>
> > > +
> > > +properties:
> > > +  $nodename:
> > > +    pattern: "^easrc@.*"
> > > +
> > > +  compatible:
> > > +    const: fsl,imx8mn-easrc
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: Peripheral clock
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: mem
> > > +
> > > +  dmas:
> > > +    maxItems: 8
> > > +
> > > +  dma-names:
> > > +    items:
> > > +      - const: ctx0_rx
> > > +      - const: ctx0_tx
> > > +      - const: ctx1_rx
> > > +      - const: ctx1_tx
> > > +      - const: ctx2_rx
> > > +      - const: ctx2_tx
> > > +      - const: ctx3_rx
> > > +      - const: ctx3_tx
> > > +
> > > +  firmware-name:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/string
> > > +      - const: imx/easrc/easrc-imx8mn.bin
> > > +    description: The coefficient table for the filters
> > > +
> > > +  fsl,asrc-rate:
> >
> > fsl,asrc-rate-hz
>
> Can we keep "fsl,asrc-rate", because I want this property
> align with the one in fsl,asrc.txt.  These two asrc modules
> can share same property name.

Oh, yes.

So with the example fixed:

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
new file mode 100644
index 000000000000..14ea60084420
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -0,0 +1,101 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  $nodename:
+    pattern: "^easrc@.*"
+
+  compatible:
+    const: fsl,imx8mn-easrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: mem
+
+  dmas:
+    maxItems: 8
+
+  dma-names:
+    items:
+      - const: ctx0_rx
+      - const: ctx0_tx
+      - const: ctx1_rx
+      - const: ctx1_tx
+      - const: ctx2_rx
+      - const: ctx2_tx
+      - const: ctx3_rx
+      - const: ctx3_tx
+
+  firmware-name:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/string
+      - const: imx/easrc/easrc-imx8mn.bin
+    description: The coefficient table for the filters
+
+  fsl,asrc-rate:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 8000
+      - maximum: 192000
+    description: Defines a mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-format:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [2, 6, 10, 32, 36]
+        default: 2
+    description:
+      Defines a mutual sample format used by DPCM Back Ends
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - firmware-name
+  - fsl,asrc-rate
+  - fsl,asrc-format
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+
+    easrc: easrc@300C0000 {
+           compatible = "fsl,imx8mn-easrc";
+           reg = <0x0 0x300C0000 0x0 0x10000>;
+           interrupts = <0x0 122 0x4>;
+           clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+           clock-names = "mem";
+           dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+                  <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+                  <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+                  <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+           dma-names = "ctx0_rx", "ctx0_tx",
+                       "ctx1_rx", "ctx1_tx",
+                       "ctx2_rx", "ctx2_tx",
+                       "ctx3_rx", "ctx3_tx";
+           firmware-name = "imx/easrc/easrc-imx8mn.bin";
+           fsl,asrc-rate  = <8000>;
+           fsl,asrc-format = <2>;
+    };