diff mbox series

[2/5] blktrace: fix debugfs use after free

Message ID 20200414041902.16769-3-mcgrof@kernel.org (mailing list archive)
State New, archived
Headers show
Series blktrace: fix use after free | expand

Commit Message

Luis Chamberlain April 14, 2020, 4:18 a.m. UTC
On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash, if you
happen to abuse blktrace in a way it was not intended.

Namely, if you loop adding a device, setup the blktrace with BLKTRACESETUP,
forget to BLKTRACETEARDOWN, and then just remove the device you end up
with a panic:

[  107.193134] debugfs: Directory 'loop0' with parent 'block' already present!
[  107.254615] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[  107.258785] #PF: supervisor write access in kernel mode
[  107.262035] #PF: error_code(0x0002) - not-present page
[  107.264106] PGD 0 P4D 0
[  107.264404] Oops: 0002 [#1] SMP NOPTI
[  107.264803] CPU: 8 PID: 674 Comm: kworker/8:2 Tainted: G            E 5.6.0-rc7-next-20200327 #1
[  107.265712] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[  107.266553] Workqueue: events __blk_release_queue
[  107.267051] RIP: 0010:down_write+0x15/0x40
[  107.267488] Code: eb ca e8 ee a5 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f  65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d
[  107.269300] RSP: 0018:ffff9927c06efda8 EFLAGS: 00010246
[  107.269841] RAX: 0000000000000000 RBX: ffff8be7e73b0600 RCX: ffffff8100000000
[  107.270559] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[  107.271281] RBP: 00000000000000a0 R08: ffff8be7ebc80fa8 R09: ffff8be7ebc80fa8
[  107.272001] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[  107.272722] R13: ffff8be7efc30400 R14: ffff8be7e0571200 R15: 00000000000000a0
[  107.273475] FS:  0000000000000000(0000) GS:ffff8be7efc00000(0000) knlGS:0000000000000000
[  107.274346] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  107.274968] CR2: 00000000000000a0 CR3: 000000042abee003 CR4: 0000000000360ee0
[  107.275710] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  107.276465] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  107.277214] Call Trace:
[  107.277532]  simple_recursive_removal+0x4e/0x2e0
[  107.278049]  ? debugfs_remove+0x60/0x60
[  107.278493]  debugfs_remove+0x40/0x60
[  107.278922]  blk_trace_free+0xd/0x50
[  107.279339]  __blk_trace_remove+0x27/0x40
[  107.279797]  blk_trace_shutdown+0x30/0x40
[  107.280256]  __blk_release_queue+0xab/0x110
[  107.280734]  process_one_work+0x1b4/0x380
[  107.281194]  worker_thread+0x50/0x3c0
[  107.281622]  kthread+0xf9/0x130
[  107.281994]  ? process_one_work+0x380/0x380
[  107.282467]  ? kthread_park+0x90/0x90
[  107.282895]  ret_from_fork+0x1f/0x40
[  107.283316] Modules linked in: loop(E) <etc>
[  107.288562] CR2: 00000000000000a0
[  107.288957] ---[ end trace b885d243d441bbce ]---

This splat happens to be very similar to the one reported via
kernel.org korg#205713, only that korg#205713 was for v4.19.83
and the above now includes the simple_recursive_removal() introduced
via commit a3d1e7eb5abe ("simple_recursive_removal(): kernel-side rm
-rf for ramfs-style filesystems") merged on v5.6.

korg#205713 then was used to create CVE-2019-19770 and claims that
the bug is in a use-after-free in the debugfs core code. The
implications of this being a generic UAF on debugfs would be
much more severe, as it would imply parent dentries can sometimes
not be positive, which we hold by design is just not possible.

Below is the splat explained with a bit more details, explaining
what is happening in userspace, kernel, and a print of the CPU on,
which the code runs on:

load loopback module
[   13.603371] == blk_mq_debugfs_register(12) start
[   13.604040] == blk_mq_debugfs_register(12) q->debugfs_dir created
[   13.604934] == blk_mq_debugfs_register(12) end
[   13.627382] == blk_mq_debugfs_register(12) start
[   13.628041] == blk_mq_debugfs_register(12) q->debugfs_dir created
[   13.629240] == blk_mq_debugfs_register(12) end
[   13.651667] == blk_mq_debugfs_register(12) start
[   13.652836] == blk_mq_debugfs_register(12) q->debugfs_dir created
[   13.655107] == blk_mq_debugfs_register(12) end
[   13.684917] == blk_mq_debugfs_register(12) start
[   13.687876] == blk_mq_debugfs_register(12) q->debugfs_dir created
[   13.691588] == blk_mq_debugfs_register(13) end
[   13.707320] == blk_mq_debugfs_register(13) start
[   13.707863] == blk_mq_debugfs_register(13) q->debugfs_dir created
[   13.708856] == blk_mq_debugfs_register(13) end
[   13.735623] == blk_mq_debugfs_register(13) start
[   13.736656] == blk_mq_debugfs_register(13) q->debugfs_dir created
[   13.738411] == blk_mq_debugfs_register(13) end
[   13.763326] == blk_mq_debugfs_register(13) start
[   13.763972] == blk_mq_debugfs_register(13) q->debugfs_dir created
[   13.765167] == blk_mq_debugfs_register(13) end
[   13.779510] == blk_mq_debugfs_register(13) start
[   13.780522] == blk_mq_debugfs_register(13) q->debugfs_dir created
[   13.782338] == blk_mq_debugfs_register(13) end
[   13.783521] loop: module loaded

LOOP_CTL_DEL(loop0) #1
[   13.803550] = __blk_release_queue(4) start
[   13.807772] == blk_trace_shutdown(4) start
[   13.810749] == blk_trace_shutdown(4) end
[   13.813437] = __blk_release_queue(4) calling blk_mq_debugfs_unregister()
[   13.817593] ==== blk_mq_debugfs_unregister(4) begin
[   13.817621] ==== blk_mq_debugfs_unregister(4) debugfs_remove_recursive(q->debugfs_dir)
[   13.821203] ==== blk_mq_debugfs_unregister(4) end q->debugfs_dir is NULL
[   13.826166] = __blk_release_queue(4) blk_mq_debugfs_unregister() end
[   13.832992] = __blk_release_queue(4) end

LOOP_CTL_ADD(loop0) #1
[   13.843742] == blk_mq_debugfs_register(7) start
[   13.845569] == blk_mq_debugfs_register(7) q->debugfs_dir created
[   13.848628] == blk_mq_debugfs_register(7) end

BLKTRACE_SETUP(loop0) #1
[   13.850924] == blk_trace_ioctl(7, BLKTRACESETUP) start
[   13.852852] === do_blk_trace_setup(7) start
[   13.854580] === do_blk_trace_setup(7) creating directory
[   13.856620] === do_blk_trace_setup(7) using what debugfs_lookup() gave
[   13.860635] === do_blk_trace_setup(7) end with ret: 0
[   13.862615] == blk_trace_ioctl(7, BLKTRACESETUP) end

LOOP_CTL_DEL(loop0) #2
[   13.883304] = __blk_release_queue(7) start
[   13.885324] == blk_trace_shutdown(7) start
[   13.887197] == blk_trace_shutdown(7) calling __blk_trace_remove()
[   13.889807] == __blk_trace_remove(7) start
[   13.891669] === blk_trace_cleanup(7) start
[   13.911656] ====== blk_trace_free(7) start

LOOP_CTL_ADD(loop0) #2
[   13.912709] == blk_mq_debugfs_register(2) start

---> From LOOP_CTL_DEL(loop0) #2
[   13.915887] ====== blk_trace_free(7) end

---> From LOOP_CTL_ADD(loop0) #2
[   13.918359] debugfs: Directory 'loop0' with parent 'block' already present!
[   13.926433] == blk_mq_debugfs_register(2) q->debugfs_dir created
[   13.930373] == blk_mq_debugfs_register(2) end

BLKTRACE_SETUP(loop0) #2
[   13.933961] == blk_trace_ioctl(2, BLKTRACESETUP) start
[   13.936758] === do_blk_trace_setup(2) start
[   13.938944] === do_blk_trace_setup(2) creating directory
[   13.941029] === do_blk_trace_setup(2) using what debugfs_lookup() gave

---> From LOOP_CTL_DEL(loop0) #2
[   13.971046] === blk_trace_cleanup(7) end
[   13.973175] == __blk_trace_remove(7) end
[   13.975352] == blk_trace_shutdown(7) end
[   13.977415] = __blk_release_queue(7) calling blk_mq_debugfs_unregister()
[   13.980645] ==== blk_mq_debugfs_unregister(7) begin
[   13.980696] ==== blk_mq_debugfs_unregister(7) debugfs_remove_recursive(q->debugfs_dir)
[   13.983118] ==== blk_mq_debugfs_unregister(7) end q->debugfs_dir is NULL
[   13.986945] = __blk_release_queue(7) blk_mq_debugfs_unregister() end
[   13.993155] = __blk_release_queue(7) end

---> From BLKTRACE_SETUP(loop0) #2
[   13.995928] === do_blk_trace_setup(2) end with ret: 0
[   13.997623] == blk_trace_ioctl(2, BLKTRACESETUP) end

LOOP_CTL_DEL(loop0) #3
[   14.035119] = __blk_release_queue(2) start
[   14.036925] == blk_trace_shutdown(2) start
[   14.038518] == blk_trace_shutdown(2) calling __blk_trace_remove()
[   14.040829] == __blk_trace_remove(2) start
[   14.042413] === blk_trace_cleanup(2) start

LOOP_CTL_ADD(loop0) #3
[   14.072522] == blk_mq_debugfs_register(6) start

---> From LOOP_CTL_DEL(loop0) #3
[   14.075151] ====== blk_trace_free(2) start

---> From LOOP_CTL_ADD(loop0) #3
[   14.075882] == blk_mq_debugfs_register(6) q->debugfs_dir created

---> From LOOP_CTL_DEL(loop0) #3
[   14.078624] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[   14.084332] == blk_mq_debugfs_register(6) end
[   14.086971] #PF: supervisor write access in kernel mode
[   14.086974] #PF: error_code(0x0002) - not-present page
[   14.086977] PGD 0 P4D 0
[   14.086984] Oops: 0002 [#1] SMP NOPTI
[   14.086990] CPU: 2 PID: 287 Comm: kworker/2:2 Tainted: G            E 5.6.0-next-20200403+ #54
[   14.086991] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[   14.087002] Workqueue: events __blk_release_queue
[   14.087011] RIP: 0010:down_write+0x15/0x40
[   14.090300] == blk_trace_ioctl(6, BLKTRACESETUP) start
[   14.093277] Code: eb ca e8 3e 34 8d ff cc cc cc cc cc cc cc cc cc cc
cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00
00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d
[   14.093280] RSP: 0018:ffffc28a00533da8 EFLAGS: 00010246
[   14.093284] RAX: 0000000000000000 RBX: ffff9f7a24d07980 RCX: ffffff8100000000
[   14.093286] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[   14.093287] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000019
[   14.093289] R10: 0000000000000774 R11: 0000000000000000 R12: 0000000000000000
[   14.093291] R13: ffff9f7a2fab0400 R14: ffff9f7a21dd1140 R15: 00000000000000a0
[   14.093294] FS:  0000000000000000(0000) GS:ffff9f7a2fa80000(0000) knlGS:0000000000000000
[   14.093296] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   14.093298] CR2: 00000000000000a0 CR3: 00000004293d2003 CR4: 0000000000360ee0
[   14.093307] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   14.093308] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   14.093310] Call Trace:
[   14.093324]  simple_recursive_removal+0x4e/0x2e0
[   14.093330]  ? debugfs_remove+0x60/0x60
[   14.093334]  debugfs_remove+0x40/0x60
[   14.093339]  blk_trace_free+0x20/0x70
[   14.093346]  __blk_trace_remove+0x54/0x90
[   14.096704] === do_blk_trace_setup(6) start
[   14.098534]  blk_trace_shutdown+0x74/0x80
[   14.100958] === do_blk_trace_setup(6) creating directory
[   14.104575]  __blk_release_queue+0xbe/0x160
[   14.104580]  process_one_work+0x1b4/0x380
[   14.104585]  worker_thread+0x50/0x3c0
[   14.104589]  kthread+0xf9/0x130
[   14.104593]  ? process_one_work+0x380/0x380
[   14.104596]  ? kthread_park+0x90/0x90
[   14.104599]  ret_from_fork+0x1f/0x40
[   14.104603] Modules linked in: loop(E) xfs(E) libcrc32c(E)
crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) joydev(E)
serio_raw(E) aesni_intel(E) glue_helper(E) virtio_balloon(E) evdev(E)
crypto_simd(E) pcspkr(E) cryptd(E) i6300esb(E) button(E) ip_tables(E)
x_tables(E) autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E)
jbd2(E) virtio_net(E) net_failover(E) failover(E) virtio_blk(E)
ata_generic(E) uhci_hcd(E) ata_piix(E) ehci_hcd(E) nvme(E) libata(E)
crc32c_intel(E) usbcore(E) psmouse(E) nvme_core(E) virtio_pci(E)
scsi_mod(E) virtio_ring(E) t10_pi(E) virtio(E) i2c_piix4(E) floppy(E)
[   14.107400] === do_blk_trace_setup(6) using what debugfs_lookup() gave
[   14.108939] CR2: 00000000000000a0
[   14.110589] === do_blk_trace_setup(6) end with ret: 0
[   14.111592] ---[ end trace 7a783b33b9614db9 ]---

The root cause to this issue is that debugfs_lookup() can find a
previous incarnation's dir of the same name which is about to get
removed from a not yet schedule work.

We can fix the UAF by simply using a debugfs directory which moving
forward will always be accessible if debugfs is enabled, this way,
its allocated and avaialble always for both request-based block
drivers or make_request drivers (multiqueue) block drivers.

This simplifies the code considerably, with the only penalty now being
that we're always creating the request queue debugfs directory for the
request-based block device drivers.

The UAF then is not a core debugfs issue, but instead a misuse of
debugfs, and this issue can only be triggered if you are root, and
misuse blktrace.

This issue can be reproduced with break-blktrace [2] using:

  break-blktrace -c 10 -d -s

This patch fixes this issue. Note that there is also another
respective UAF but from the ioctl path [3], this should also fix
that issue.

This patch then also disputes the severity of CVE-2019-19770 as
this issue is only possible by being root and using blktrace.

It is not a core debugfs issue.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=205713
[1] https://nvd.nist.gov/vuln/detail/CVE-2019-19770
[2] https://github.com/mcgrof/break-blktrace
[3] https://lore.kernel.org/lkml/000000000000ec635b059f752700@google.com/

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: yu kuai <yukuai3@huawei.com>
Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com
Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
---
 block/blk-debugfs.c          | 12 ++++++++++++
 block/blk-mq-debugfs.c       |  5 -----
 block/blk-sysfs.c            |  3 +++
 block/blk.h                  | 10 ++++++++++
 include/linux/blkdev.h       |  5 ++++-
 include/linux/blktrace_api.h |  1 -
 kernel/trace/blktrace.c      | 19 ++++++++-----------
 7 files changed, 37 insertions(+), 18 deletions(-)

Comments

Greg Kroah-Hartman April 14, 2020, 7:37 a.m. UTC | #1
On Tue, Apr 14, 2020 at 04:18:59AM +0000, Luis Chamberlain wrote:
> On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
> merged on v4.12 Omar fixed the original blktrace code for request-based
> drivers (multiqueue). This however left in place a possible crash, if you
> happen to abuse blktrace in a way it was not intended.
> 
> Namely, if you loop adding a device, setup the blktrace with BLKTRACESETUP,
> forget to BLKTRACETEARDOWN, and then just remove the device you end up
> with a panic:
> 
> [  107.193134] debugfs: Directory 'loop0' with parent 'block' already present!
> [  107.254615] BUG: kernel NULL pointer dereference, address: 00000000000000a0
> [  107.258785] #PF: supervisor write access in kernel mode
> [  107.262035] #PF: error_code(0x0002) - not-present page
> [  107.264106] PGD 0 P4D 0
> [  107.264404] Oops: 0002 [#1] SMP NOPTI
> [  107.264803] CPU: 8 PID: 674 Comm: kworker/8:2 Tainted: G            E 5.6.0-rc7-next-20200327 #1
> [  107.265712] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
> [  107.266553] Workqueue: events __blk_release_queue
> [  107.267051] RIP: 0010:down_write+0x15/0x40
> [  107.267488] Code: eb ca e8 ee a5 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f  65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d
> [  107.269300] RSP: 0018:ffff9927c06efda8 EFLAGS: 00010246
> [  107.269841] RAX: 0000000000000000 RBX: ffff8be7e73b0600 RCX: ffffff8100000000
> [  107.270559] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
> [  107.271281] RBP: 00000000000000a0 R08: ffff8be7ebc80fa8 R09: ffff8be7ebc80fa8
> [  107.272001] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
> [  107.272722] R13: ffff8be7efc30400 R14: ffff8be7e0571200 R15: 00000000000000a0
> [  107.273475] FS:  0000000000000000(0000) GS:ffff8be7efc00000(0000) knlGS:0000000000000000
> [  107.274346] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  107.274968] CR2: 00000000000000a0 CR3: 000000042abee003 CR4: 0000000000360ee0
> [  107.275710] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [  107.276465] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [  107.277214] Call Trace:
> [  107.277532]  simple_recursive_removal+0x4e/0x2e0
> [  107.278049]  ? debugfs_remove+0x60/0x60
> [  107.278493]  debugfs_remove+0x40/0x60
> [  107.278922]  blk_trace_free+0xd/0x50
> [  107.279339]  __blk_trace_remove+0x27/0x40
> [  107.279797]  blk_trace_shutdown+0x30/0x40
> [  107.280256]  __blk_release_queue+0xab/0x110
> [  107.280734]  process_one_work+0x1b4/0x380
> [  107.281194]  worker_thread+0x50/0x3c0
> [  107.281622]  kthread+0xf9/0x130
> [  107.281994]  ? process_one_work+0x380/0x380
> [  107.282467]  ? kthread_park+0x90/0x90
> [  107.282895]  ret_from_fork+0x1f/0x40
> [  107.283316] Modules linked in: loop(E) <etc>
> [  107.288562] CR2: 00000000000000a0
> [  107.288957] ---[ end trace b885d243d441bbce ]---
> 
> This splat happens to be very similar to the one reported via
> kernel.org korg#205713, only that korg#205713 was for v4.19.83
> and the above now includes the simple_recursive_removal() introduced
> via commit a3d1e7eb5abe ("simple_recursive_removal(): kernel-side rm
> -rf for ramfs-style filesystems") merged on v5.6.
> 
> korg#205713 then was used to create CVE-2019-19770 and claims that
> the bug is in a use-after-free in the debugfs core code. The
> implications of this being a generic UAF on debugfs would be
> much more severe, as it would imply parent dentries can sometimes
> not be positive, which we hold by design is just not possible.
> 
> Below is the splat explained with a bit more details, explaining
> what is happening in userspace, kernel, and a print of the CPU on,
> which the code runs on:
> 
> load loopback module
> [   13.603371] == blk_mq_debugfs_register(12) start
> [   13.604040] == blk_mq_debugfs_register(12) q->debugfs_dir created
> [   13.604934] == blk_mq_debugfs_register(12) end
> [   13.627382] == blk_mq_debugfs_register(12) start
> [   13.628041] == blk_mq_debugfs_register(12) q->debugfs_dir created
> [   13.629240] == blk_mq_debugfs_register(12) end
> [   13.651667] == blk_mq_debugfs_register(12) start
> [   13.652836] == blk_mq_debugfs_register(12) q->debugfs_dir created
> [   13.655107] == blk_mq_debugfs_register(12) end
> [   13.684917] == blk_mq_debugfs_register(12) start
> [   13.687876] == blk_mq_debugfs_register(12) q->debugfs_dir created
> [   13.691588] == blk_mq_debugfs_register(13) end
> [   13.707320] == blk_mq_debugfs_register(13) start
> [   13.707863] == blk_mq_debugfs_register(13) q->debugfs_dir created
> [   13.708856] == blk_mq_debugfs_register(13) end
> [   13.735623] == blk_mq_debugfs_register(13) start
> [   13.736656] == blk_mq_debugfs_register(13) q->debugfs_dir created
> [   13.738411] == blk_mq_debugfs_register(13) end
> [   13.763326] == blk_mq_debugfs_register(13) start
> [   13.763972] == blk_mq_debugfs_register(13) q->debugfs_dir created
> [   13.765167] == blk_mq_debugfs_register(13) end
> [   13.779510] == blk_mq_debugfs_register(13) start
> [   13.780522] == blk_mq_debugfs_register(13) q->debugfs_dir created
> [   13.782338] == blk_mq_debugfs_register(13) end
> [   13.783521] loop: module loaded
> 
> LOOP_CTL_DEL(loop0) #1
> [   13.803550] = __blk_release_queue(4) start
> [   13.807772] == blk_trace_shutdown(4) start
> [   13.810749] == blk_trace_shutdown(4) end
> [   13.813437] = __blk_release_queue(4) calling blk_mq_debugfs_unregister()
> [   13.817593] ==== blk_mq_debugfs_unregister(4) begin
> [   13.817621] ==== blk_mq_debugfs_unregister(4) debugfs_remove_recursive(q->debugfs_dir)
> [   13.821203] ==== blk_mq_debugfs_unregister(4) end q->debugfs_dir is NULL
> [   13.826166] = __blk_release_queue(4) blk_mq_debugfs_unregister() end
> [   13.832992] = __blk_release_queue(4) end
> 
> LOOP_CTL_ADD(loop0) #1
> [   13.843742] == blk_mq_debugfs_register(7) start
> [   13.845569] == blk_mq_debugfs_register(7) q->debugfs_dir created
> [   13.848628] == blk_mq_debugfs_register(7) end
> 
> BLKTRACE_SETUP(loop0) #1
> [   13.850924] == blk_trace_ioctl(7, BLKTRACESETUP) start
> [   13.852852] === do_blk_trace_setup(7) start
> [   13.854580] === do_blk_trace_setup(7) creating directory
> [   13.856620] === do_blk_trace_setup(7) using what debugfs_lookup() gave
> [   13.860635] === do_blk_trace_setup(7) end with ret: 0
> [   13.862615] == blk_trace_ioctl(7, BLKTRACESETUP) end
> 
> LOOP_CTL_DEL(loop0) #2
> [   13.883304] = __blk_release_queue(7) start
> [   13.885324] == blk_trace_shutdown(7) start
> [   13.887197] == blk_trace_shutdown(7) calling __blk_trace_remove()
> [   13.889807] == __blk_trace_remove(7) start
> [   13.891669] === blk_trace_cleanup(7) start
> [   13.911656] ====== blk_trace_free(7) start
> 
> LOOP_CTL_ADD(loop0) #2
> [   13.912709] == blk_mq_debugfs_register(2) start
> 
> ---> From LOOP_CTL_DEL(loop0) #2
> [   13.915887] ====== blk_trace_free(7) end
> 
> ---> From LOOP_CTL_ADD(loop0) #2
> [   13.918359] debugfs: Directory 'loop0' with parent 'block' already present!
> [   13.926433] == blk_mq_debugfs_register(2) q->debugfs_dir created
> [   13.930373] == blk_mq_debugfs_register(2) end
> 
> BLKTRACE_SETUP(loop0) #2
> [   13.933961] == blk_trace_ioctl(2, BLKTRACESETUP) start
> [   13.936758] === do_blk_trace_setup(2) start
> [   13.938944] === do_blk_trace_setup(2) creating directory
> [   13.941029] === do_blk_trace_setup(2) using what debugfs_lookup() gave
> 
> ---> From LOOP_CTL_DEL(loop0) #2
> [   13.971046] === blk_trace_cleanup(7) end
> [   13.973175] == __blk_trace_remove(7) end
> [   13.975352] == blk_trace_shutdown(7) end
> [   13.977415] = __blk_release_queue(7) calling blk_mq_debugfs_unregister()
> [   13.980645] ==== blk_mq_debugfs_unregister(7) begin
> [   13.980696] ==== blk_mq_debugfs_unregister(7) debugfs_remove_recursive(q->debugfs_dir)
> [   13.983118] ==== blk_mq_debugfs_unregister(7) end q->debugfs_dir is NULL
> [   13.986945] = __blk_release_queue(7) blk_mq_debugfs_unregister() end
> [   13.993155] = __blk_release_queue(7) end
> 
> ---> From BLKTRACE_SETUP(loop0) #2
> [   13.995928] === do_blk_trace_setup(2) end with ret: 0
> [   13.997623] == blk_trace_ioctl(2, BLKTRACESETUP) end
> 
> LOOP_CTL_DEL(loop0) #3
> [   14.035119] = __blk_release_queue(2) start
> [   14.036925] == blk_trace_shutdown(2) start
> [   14.038518] == blk_trace_shutdown(2) calling __blk_trace_remove()
> [   14.040829] == __blk_trace_remove(2) start
> [   14.042413] === blk_trace_cleanup(2) start
> 
> LOOP_CTL_ADD(loop0) #3
> [   14.072522] == blk_mq_debugfs_register(6) start
> 
> ---> From LOOP_CTL_DEL(loop0) #3
> [   14.075151] ====== blk_trace_free(2) start
> 
> ---> From LOOP_CTL_ADD(loop0) #3
> [   14.075882] == blk_mq_debugfs_register(6) q->debugfs_dir created
> 
> ---> From LOOP_CTL_DEL(loop0) #3
> [   14.078624] BUG: kernel NULL pointer dereference, address: 00000000000000a0
> [   14.084332] == blk_mq_debugfs_register(6) end
> [   14.086971] #PF: supervisor write access in kernel mode
> [   14.086974] #PF: error_code(0x0002) - not-present page
> [   14.086977] PGD 0 P4D 0
> [   14.086984] Oops: 0002 [#1] SMP NOPTI
> [   14.086990] CPU: 2 PID: 287 Comm: kworker/2:2 Tainted: G            E 5.6.0-next-20200403+ #54
> [   14.086991] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
> [   14.087002] Workqueue: events __blk_release_queue
> [   14.087011] RIP: 0010:down_write+0x15/0x40
> [   14.090300] == blk_trace_ioctl(6, BLKTRACESETUP) start
> [   14.093277] Code: eb ca e8 3e 34 8d ff cc cc cc cc cc cc cc cc cc cc
> cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00
> 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d
> [   14.093280] RSP: 0018:ffffc28a00533da8 EFLAGS: 00010246
> [   14.093284] RAX: 0000000000000000 RBX: ffff9f7a24d07980 RCX: ffffff8100000000
> [   14.093286] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
> [   14.093287] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000019
> [   14.093289] R10: 0000000000000774 R11: 0000000000000000 R12: 0000000000000000
> [   14.093291] R13: ffff9f7a2fab0400 R14: ffff9f7a21dd1140 R15: 00000000000000a0
> [   14.093294] FS:  0000000000000000(0000) GS:ffff9f7a2fa80000(0000) knlGS:0000000000000000
> [   14.093296] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   14.093298] CR2: 00000000000000a0 CR3: 00000004293d2003 CR4: 0000000000360ee0
> [   14.093307] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   14.093308] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [   14.093310] Call Trace:
> [   14.093324]  simple_recursive_removal+0x4e/0x2e0
> [   14.093330]  ? debugfs_remove+0x60/0x60
> [   14.093334]  debugfs_remove+0x40/0x60
> [   14.093339]  blk_trace_free+0x20/0x70
> [   14.093346]  __blk_trace_remove+0x54/0x90
> [   14.096704] === do_blk_trace_setup(6) start
> [   14.098534]  blk_trace_shutdown+0x74/0x80
> [   14.100958] === do_blk_trace_setup(6) creating directory
> [   14.104575]  __blk_release_queue+0xbe/0x160
> [   14.104580]  process_one_work+0x1b4/0x380
> [   14.104585]  worker_thread+0x50/0x3c0
> [   14.104589]  kthread+0xf9/0x130
> [   14.104593]  ? process_one_work+0x380/0x380
> [   14.104596]  ? kthread_park+0x90/0x90
> [   14.104599]  ret_from_fork+0x1f/0x40
> [   14.104603] Modules linked in: loop(E) xfs(E) libcrc32c(E)
> crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) joydev(E)
> serio_raw(E) aesni_intel(E) glue_helper(E) virtio_balloon(E) evdev(E)
> crypto_simd(E) pcspkr(E) cryptd(E) i6300esb(E) button(E) ip_tables(E)
> x_tables(E) autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E)
> jbd2(E) virtio_net(E) net_failover(E) failover(E) virtio_blk(E)
> ata_generic(E) uhci_hcd(E) ata_piix(E) ehci_hcd(E) nvme(E) libata(E)
> crc32c_intel(E) usbcore(E) psmouse(E) nvme_core(E) virtio_pci(E)
> scsi_mod(E) virtio_ring(E) t10_pi(E) virtio(E) i2c_piix4(E) floppy(E)
> [   14.107400] === do_blk_trace_setup(6) using what debugfs_lookup() gave
> [   14.108939] CR2: 00000000000000a0
> [   14.110589] === do_blk_trace_setup(6) end with ret: 0
> [   14.111592] ---[ end trace 7a783b33b9614db9 ]---
> 
> The root cause to this issue is that debugfs_lookup() can find a
> previous incarnation's dir of the same name which is about to get
> removed from a not yet schedule work.
> 
> We can fix the UAF by simply using a debugfs directory which moving
> forward will always be accessible if debugfs is enabled, this way,
> its allocated and avaialble always for both request-based block
> drivers or make_request drivers (multiqueue) block drivers.
> 
> This simplifies the code considerably, with the only penalty now being
> that we're always creating the request queue debugfs directory for the
> request-based block device drivers.
> 
> The UAF then is not a core debugfs issue, but instead a misuse of
> debugfs, and this issue can only be triggered if you are root, and
> misuse blktrace.
> 
> This issue can be reproduced with break-blktrace [2] using:
> 
>   break-blktrace -c 10 -d -s
> 
> This patch fixes this issue. Note that there is also another
> respective UAF but from the ioctl path [3], this should also fix
> that issue.
> 
> This patch then also disputes the severity of CVE-2019-19770 as
> this issue is only possible by being root and using blktrace.
> 
> It is not a core debugfs issue.
> 
> [0] https://bugzilla.kernel.org/show_bug.cgi?id=205713
> [1] https://nvd.nist.gov/vuln/detail/CVE-2019-19770
> [2] https://github.com/mcgrof/break-blktrace
> [3] https://lore.kernel.org/lkml/000000000000ec635b059f752700@google.com/
> 
> Cc: Bart Van Assche <bvanassche@acm.org>
> Cc: Omar Sandoval <osandov@fb.com>
> Cc: Hannes Reinecke <hare@suse.com>
> Cc: Nicolai Stange <nstange@suse.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Michal Hocko <mhocko@kernel.org>
> Cc: yu kuai <yukuai3@huawei.com>
> Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com
> Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig April 14, 2020, 3:38 p.m. UTC | #2
Looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>
Bart Van Assche April 15, 2020, 2:46 a.m. UTC | #3
On 2020-04-13 21:18, Luis Chamberlain wrote:
> On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
> merged on v4.12 Omar fixed the original blktrace code for request-based
> drivers (multiqueue). This however left in place a possible crash, if you
> happen to abuse blktrace in a way it was not intended.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Eric Sandeen April 15, 2020, 5:38 p.m. UTC | #4
On 4/13/20 11:18 PM, Luis Chamberlain wrote:
> On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
> merged on v4.12 Omar fixed the original blktrace code for request-based
> drivers (multiqueue). This however left in place a possible crash, if you
> happen to abuse blktrace in a way it was not intended.
> 
> Namely, if you loop adding a device, setup the blktrace with BLKTRACESETUP,
> forget to BLKTRACETEARDOWN, and then just remove the device you end up
> with a panic:

I think this patch makes this all cleaner anyway, but - without the apparent
loop bug mentioned by Bart which allows removal of the loop device while blktrace
is active (if I read that right), can this still happen?

-Eric

> [  107.193134] debugfs: Directory 'loop0' with parent 'block' already present!
> [  107.254615] BUG: kernel NULL pointer dereference, address: 00000000000000a0
> [  107.258785] #PF: supervisor write access in kernel mode
> [  107.262035] #PF: error_code(0x0002) - not-present page
> [  107.264106] PGD 0 P4D 0
> [  107.264404] Oops: 0002 [#1] SMP NOPTI
> [  107.264803] CPU: 8 PID: 674 Comm: kworker/8:2 Tainted: G            E 5.6.0-rc7-next-20200327 #1
> [  107.265712] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
> [  107.266553] Workqueue: events __blk_release_queue
> [  107.267051] RIP: 0010:down_write+0x15/0x40
> [  107.267488] Code: eb ca e8 ee a5 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f  65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d
> [  107.269300] RSP: 0018:ffff9927c06efda8 EFLAGS: 00010246
> [  107.269841] RAX: 0000000000000000 RBX: ffff8be7e73b0600 RCX: ffffff8100000000
> [  107.270559] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
> [  107.271281] RBP: 00000000000000a0 R08: ffff8be7ebc80fa8 R09: ffff8be7ebc80fa8
> [  107.272001] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
> [  107.272722] R13: ffff8be7efc30400 R14: ffff8be7e0571200 R15: 00000000000000a0
> [  107.273475] FS:  0000000000000000(0000) GS:ffff8be7efc00000(0000) knlGS:0000000000000000
> [  107.274346] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  107.274968] CR2: 00000000000000a0 CR3: 000000042abee003 CR4: 0000000000360ee0
> [  107.275710] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [  107.276465] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [  107.277214] Call Trace:
> [  107.277532]  simple_recursive_removal+0x4e/0x2e0
> [  107.278049]  ? debugfs_remove+0x60/0x60
> [  107.278493]  debugfs_remove+0x40/0x60
> [  107.278922]  blk_trace_free+0xd/0x50
> [  107.279339]  __blk_trace_remove+0x27/0x40
> [  107.279797]  blk_trace_shutdown+0x30/0x40
> [  107.280256]  __blk_release_queue+0xab/0x110
> [  107.280734]  process_one_work+0x1b4/0x380
> [  107.281194]  worker_thread+0x50/0x3c0
> [  107.281622]  kthread+0xf9/0x130
> [  107.281994]  ? process_one_work+0x380/0x380
> [  107.282467]  ? kthread_park+0x90/0x90
> [  107.282895]  ret_from_fork+0x1f/0x40
> [  107.283316] Modules linked in: loop(E) <etc>
> [  107.288562] CR2: 00000000000000a0
> [  107.288957] ---[ end trace b885d243d441bbce ]---
Bart Van Assche April 15, 2020, 9:48 p.m. UTC | #5
On 2020-04-15 10:38, Eric Sandeen wrote:
> On 4/13/20 11:18 PM, Luis Chamberlain wrote:
>> On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
>> merged on v4.12 Omar fixed the original blktrace code for request-based
>> drivers (multiqueue). This however left in place a possible crash, if you
>> happen to abuse blktrace in a way it was not intended.
>>
>> Namely, if you loop adding a device, setup the blktrace with BLKTRACESETUP,
>> forget to BLKTRACETEARDOWN, and then just remove the device you end up
>> with a panic:
> 
> I think this patch makes this all cleaner anyway, but - without the apparent
> loop bug mentioned by Bart which allows removal of the loop device while blktrace
> is active (if I read that right), can this still happen?

That's a great question. Even if the loop driver fix would be sufficient
to fix the blktrace debugfs use-after free I think the block layer
patches from this series are still very valuable. As explained in the
cover letter this patch series fixes more than only the blktrace debugfs
use-after-free.

Thanks,

Bart.
Luis Chamberlain April 16, 2020, 12:56 a.m. UTC | #6
On Wed, Apr 15, 2020 at 12:38:26PM -0500, Eric Sandeen wrote:
> On 4/13/20 11:18 PM, Luis Chamberlain wrote:
> > On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
> > merged on v4.12 Omar fixed the original blktrace code for request-based
> > drivers (multiqueue). This however left in place a possible crash, if you
> > happen to abuse blktrace in a way it was not intended.
> > 
> > Namely, if you loop adding a device, setup the blktrace with BLKTRACESETUP,
> > forget to BLKTRACETEARDOWN, and then just remove the device you end up
> > with a panic:
> 
> I think this patch makes this all cleaner anyway, but - without the apparent
> loop bug mentioned by Bart which allows removal of the loop device while blktrace
> is active (if I read that right), can this still happen?

I have not tested that, but some modifications of the break-blktrace
program could enable us to test that, however I don't think the race
would be possible after patch 3/5 "blktrace: refcount the request_queue
during ioctl" is merged, as removal then a pending blktrace would
refcount the request_queue and the removal would have to wait until
the refcount is decremeneted, until after the blktrace ioctl.

  Luis
Eric Sandeen April 16, 2020, 1:02 a.m. UTC | #7
On 4/15/20 7:56 PM, Luis Chamberlain wrote:
> On Wed, Apr 15, 2020 at 12:38:26PM -0500, Eric Sandeen wrote:
>> On 4/13/20 11:18 PM, Luis Chamberlain wrote:
>>> On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
>>> merged on v4.12 Omar fixed the original blktrace code for request-based
>>> drivers (multiqueue). This however left in place a possible crash, if you
>>> happen to abuse blktrace in a way it was not intended.
>>>
>>> Namely, if you loop adding a device, setup the blktrace with BLKTRACESETUP,
>>> forget to BLKTRACETEARDOWN, and then just remove the device you end up
>>> with a panic:
>>
>> I think this patch makes this all cleaner anyway, but - without the apparent
>> loop bug mentioned by Bart which allows removal of the loop device while blktrace
>> is active (if I read that right), can this still happen?
> 
> I have not tested that, but some modifications of the break-blktrace
> program could enable us to test that

FWIW, I modified it to modprobe & rmmod scsi_debug instead of the loop ioctls,
and the module can't be unloaded after the blktrace is started since it's busy.

Not sure that's equivalent tho.

> however I don't think the race
> would be possible after patch 3/5 "blktrace: refcount the request_queue
> during ioctl" is merged, as removal then a pending blktrace would
> refcount the request_queue and the removal would have to wait until
> the refcount is decremeneted, until after the blktrace ioctl.

I'm out of my depth in the block layer, not sure who's supposed to take
refs on what. ;)

-Eric
Luis Chamberlain April 16, 2020, 1:20 a.m. UTC | #8
On Wed, Apr 15, 2020 at 08:02:04PM -0500, Eric Sandeen wrote:
> 
> 
> On 4/15/20 7:56 PM, Luis Chamberlain wrote:
> > On Wed, Apr 15, 2020 at 12:38:26PM -0500, Eric Sandeen wrote:
> >> On 4/13/20 11:18 PM, Luis Chamberlain wrote:
> >>> On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
> >>> merged on v4.12 Omar fixed the original blktrace code for request-based
> >>> drivers (multiqueue). This however left in place a possible crash, if you
> >>> happen to abuse blktrace in a way it was not intended.
> >>>
> >>> Namely, if you loop adding a device, setup the blktrace with BLKTRACESETUP,
> >>> forget to BLKTRACETEARDOWN, and then just remove the device you end up
> >>> with a panic:
> >>
> >> I think this patch makes this all cleaner anyway, but - without the apparent
> >> loop bug mentioned by Bart which allows removal of the loop device while blktrace
> >> is active (if I read that right), can this still happen?
> > 
> > I have not tested that, but some modifications of the break-blktrace
> > program could enable us to test that
> 
> FWIW, I modified it to modprobe & rmmod scsi_debug instead of the loop ioctls,
> and the module can't be unloaded after the blktrace is started since it's busy.
> 
> Not sure that's equivalent tho.

Given what Bart mentioned about sd_open, that might be the saving grace
for blocking async behaviour on scsi. If it only refcounted the
request_queue as the loop driver it would have been exposed to the
same bug.

> > however I don't think the race
> > would be possible after patch 3/5 "blktrace: refcount the request_queue
> > during ioctl" is merged, as removal then a pending blktrace would
> > refcount the request_queue and the removal would have to wait until
> > the refcount is decremeneted, until after the blktrace ioctl.
> 
> I'm out of my depth in the block layer, not sure who's supposed to take
> refs on what. ;)

I'm new to all this code, only been a few weeks looking into it, but am
trying to do my best ot make sense of it. So the above is what I can
tell would be needed.

  Luis
Ming Lei April 16, 2020, 2:10 a.m. UTC | #9
On Tue, Apr 14, 2020 at 04:18:59AM +0000, Luis Chamberlain wrote:
> On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
> merged on v4.12 Omar fixed the original blktrace code for request-based
> drivers (multiqueue). This however left in place a possible crash, if you
> happen to abuse blktrace in a way it was not intended.
> 
> Namely, if you loop adding a device, setup the blktrace with BLKTRACESETUP,
> forget to BLKTRACETEARDOWN, and then just remove the device you end up
> with a panic:
> 
> [  107.193134] debugfs: Directory 'loop0' with parent 'block' already present!
> [  107.254615] BUG: kernel NULL pointer dereference, address: 00000000000000a0
> [  107.258785] #PF: supervisor write access in kernel mode
> [  107.262035] #PF: error_code(0x0002) - not-present page
> [  107.264106] PGD 0 P4D 0
> [  107.264404] Oops: 0002 [#1] SMP NOPTI
> [  107.264803] CPU: 8 PID: 674 Comm: kworker/8:2 Tainted: G            E 5.6.0-rc7-next-20200327 #1
> [  107.265712] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
> [  107.266553] Workqueue: events __blk_release_queue
> [  107.267051] RIP: 0010:down_write+0x15/0x40
> [  107.267488] Code: eb ca e8 ee a5 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f  65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d
> [  107.269300] RSP: 0018:ffff9927c06efda8 EFLAGS: 00010246
> [  107.269841] RAX: 0000000000000000 RBX: ffff8be7e73b0600 RCX: ffffff8100000000
> [  107.270559] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
> [  107.271281] RBP: 00000000000000a0 R08: ffff8be7ebc80fa8 R09: ffff8be7ebc80fa8
> [  107.272001] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
> [  107.272722] R13: ffff8be7efc30400 R14: ffff8be7e0571200 R15: 00000000000000a0
> [  107.273475] FS:  0000000000000000(0000) GS:ffff8be7efc00000(0000) knlGS:0000000000000000
> [  107.274346] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  107.274968] CR2: 00000000000000a0 CR3: 000000042abee003 CR4: 0000000000360ee0
> [  107.275710] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [  107.276465] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [  107.277214] Call Trace:
> [  107.277532]  simple_recursive_removal+0x4e/0x2e0
> [  107.278049]  ? debugfs_remove+0x60/0x60
> [  107.278493]  debugfs_remove+0x40/0x60
> [  107.278922]  blk_trace_free+0xd/0x50
> [  107.279339]  __blk_trace_remove+0x27/0x40
> [  107.279797]  blk_trace_shutdown+0x30/0x40
> [  107.280256]  __blk_release_queue+0xab/0x110
> [  107.280734]  process_one_work+0x1b4/0x380
> [  107.281194]  worker_thread+0x50/0x3c0
> [  107.281622]  kthread+0xf9/0x130
> [  107.281994]  ? process_one_work+0x380/0x380
> [  107.282467]  ? kthread_park+0x90/0x90
> [  107.282895]  ret_from_fork+0x1f/0x40
> [  107.283316] Modules linked in: loop(E) <etc>
> [  107.288562] CR2: 00000000000000a0
> [  107.288957] ---[ end trace b885d243d441bbce ]---
> 
> This splat happens to be very similar to the one reported via
> kernel.org korg#205713, only that korg#205713 was for v4.19.83
> and the above now includes the simple_recursive_removal() introduced
> via commit a3d1e7eb5abe ("simple_recursive_removal(): kernel-side rm
> -rf for ramfs-style filesystems") merged on v5.6.
> 
> korg#205713 then was used to create CVE-2019-19770 and claims that
> the bug is in a use-after-free in the debugfs core code. The
> implications of this being a generic UAF on debugfs would be
> much more severe, as it would imply parent dentries can sometimes
> not be positive, which we hold by design is just not possible.
> 
> Below is the splat explained with a bit more details, explaining
> what is happening in userspace, kernel, and a print of the CPU on,
> which the code runs on:
> 
> load loopback module
> [   13.603371] == blk_mq_debugfs_register(12) start
> [   13.604040] == blk_mq_debugfs_register(12) q->debugfs_dir created
> [   13.604934] == blk_mq_debugfs_register(12) end
> [   13.627382] == blk_mq_debugfs_register(12) start
> [   13.628041] == blk_mq_debugfs_register(12) q->debugfs_dir created
> [   13.629240] == blk_mq_debugfs_register(12) end
> [   13.651667] == blk_mq_debugfs_register(12) start
> [   13.652836] == blk_mq_debugfs_register(12) q->debugfs_dir created
> [   13.655107] == blk_mq_debugfs_register(12) end
> [   13.684917] == blk_mq_debugfs_register(12) start
> [   13.687876] == blk_mq_debugfs_register(12) q->debugfs_dir created
> [   13.691588] == blk_mq_debugfs_register(13) end
> [   13.707320] == blk_mq_debugfs_register(13) start
> [   13.707863] == blk_mq_debugfs_register(13) q->debugfs_dir created
> [   13.708856] == blk_mq_debugfs_register(13) end
> [   13.735623] == blk_mq_debugfs_register(13) start
> [   13.736656] == blk_mq_debugfs_register(13) q->debugfs_dir created
> [   13.738411] == blk_mq_debugfs_register(13) end
> [   13.763326] == blk_mq_debugfs_register(13) start
> [   13.763972] == blk_mq_debugfs_register(13) q->debugfs_dir created
> [   13.765167] == blk_mq_debugfs_register(13) end
> [   13.779510] == blk_mq_debugfs_register(13) start
> [   13.780522] == blk_mq_debugfs_register(13) q->debugfs_dir created
> [   13.782338] == blk_mq_debugfs_register(13) end
> [   13.783521] loop: module loaded
> 
> LOOP_CTL_DEL(loop0) #1
> [   13.803550] = __blk_release_queue(4) start
> [   13.807772] == blk_trace_shutdown(4) start
> [   13.810749] == blk_trace_shutdown(4) end
> [   13.813437] = __blk_release_queue(4) calling blk_mq_debugfs_unregister()
> [   13.817593] ==== blk_mq_debugfs_unregister(4) begin
> [   13.817621] ==== blk_mq_debugfs_unregister(4) debugfs_remove_recursive(q->debugfs_dir)
> [   13.821203] ==== blk_mq_debugfs_unregister(4) end q->debugfs_dir is NULL
> [   13.826166] = __blk_release_queue(4) blk_mq_debugfs_unregister() end
> [   13.832992] = __blk_release_queue(4) end
> 
> LOOP_CTL_ADD(loop0) #1
> [   13.843742] == blk_mq_debugfs_register(7) start
> [   13.845569] == blk_mq_debugfs_register(7) q->debugfs_dir created
> [   13.848628] == blk_mq_debugfs_register(7) end
> 
> BLKTRACE_SETUP(loop0) #1
> [   13.850924] == blk_trace_ioctl(7, BLKTRACESETUP) start
> [   13.852852] === do_blk_trace_setup(7) start
> [   13.854580] === do_blk_trace_setup(7) creating directory
> [   13.856620] === do_blk_trace_setup(7) using what debugfs_lookup() gave
> [   13.860635] === do_blk_trace_setup(7) end with ret: 0
> [   13.862615] == blk_trace_ioctl(7, BLKTRACESETUP) end
> 
> LOOP_CTL_DEL(loop0) #2
> [   13.883304] = __blk_release_queue(7) start
> [   13.885324] == blk_trace_shutdown(7) start
> [   13.887197] == blk_trace_shutdown(7) calling __blk_trace_remove()
> [   13.889807] == __blk_trace_remove(7) start
> [   13.891669] === blk_trace_cleanup(7) start
> [   13.911656] ====== blk_trace_free(7) start
> 
> LOOP_CTL_ADD(loop0) #2
> [   13.912709] == blk_mq_debugfs_register(2) start
> 
> ---> From LOOP_CTL_DEL(loop0) #2
> [   13.915887] ====== blk_trace_free(7) end
> 
> ---> From LOOP_CTL_ADD(loop0) #2
> [   13.918359] debugfs: Directory 'loop0' with parent 'block' already present!
> [   13.926433] == blk_mq_debugfs_register(2) q->debugfs_dir created
> [   13.930373] == blk_mq_debugfs_register(2) end
> 
> BLKTRACE_SETUP(loop0) #2
> [   13.933961] == blk_trace_ioctl(2, BLKTRACESETUP) start
> [   13.936758] === do_blk_trace_setup(2) start
> [   13.938944] === do_blk_trace_setup(2) creating directory
> [   13.941029] === do_blk_trace_setup(2) using what debugfs_lookup() gave
> 
> ---> From LOOP_CTL_DEL(loop0) #2
> [   13.971046] === blk_trace_cleanup(7) end
> [   13.973175] == __blk_trace_remove(7) end
> [   13.975352] == blk_trace_shutdown(7) end
> [   13.977415] = __blk_release_queue(7) calling blk_mq_debugfs_unregister()
> [   13.980645] ==== blk_mq_debugfs_unregister(7) begin
> [   13.980696] ==== blk_mq_debugfs_unregister(7) debugfs_remove_recursive(q->debugfs_dir)
> [   13.983118] ==== blk_mq_debugfs_unregister(7) end q->debugfs_dir is NULL
> [   13.986945] = __blk_release_queue(7) blk_mq_debugfs_unregister() end
> [   13.993155] = __blk_release_queue(7) end
> 
> ---> From BLKTRACE_SETUP(loop0) #2
> [   13.995928] === do_blk_trace_setup(2) end with ret: 0
> [   13.997623] == blk_trace_ioctl(2, BLKTRACESETUP) end
> 
> LOOP_CTL_DEL(loop0) #3
> [   14.035119] = __blk_release_queue(2) start
> [   14.036925] == blk_trace_shutdown(2) start
> [   14.038518] == blk_trace_shutdown(2) calling __blk_trace_remove()
> [   14.040829] == __blk_trace_remove(2) start
> [   14.042413] === blk_trace_cleanup(2) start
> 
> LOOP_CTL_ADD(loop0) #3
> [   14.072522] == blk_mq_debugfs_register(6) start
> 
> ---> From LOOP_CTL_DEL(loop0) #3
> [   14.075151] ====== blk_trace_free(2) start
> 
> ---> From LOOP_CTL_ADD(loop0) #3
> [   14.075882] == blk_mq_debugfs_register(6) q->debugfs_dir created
> 
> ---> From LOOP_CTL_DEL(loop0) #3
> [   14.078624] BUG: kernel NULL pointer dereference, address: 00000000000000a0
> [   14.084332] == blk_mq_debugfs_register(6) end
> [   14.086971] #PF: supervisor write access in kernel mode
> [   14.086974] #PF: error_code(0x0002) - not-present page
> [   14.086977] PGD 0 P4D 0
> [   14.086984] Oops: 0002 [#1] SMP NOPTI
> [   14.086990] CPU: 2 PID: 287 Comm: kworker/2:2 Tainted: G            E 5.6.0-next-20200403+ #54
> [   14.086991] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
> [   14.087002] Workqueue: events __blk_release_queue
> [   14.087011] RIP: 0010:down_write+0x15/0x40
> [   14.090300] == blk_trace_ioctl(6, BLKTRACESETUP) start
> [   14.093277] Code: eb ca e8 3e 34 8d ff cc cc cc cc cc cc cc cc cc cc
> cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00
> 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d
> [   14.093280] RSP: 0018:ffffc28a00533da8 EFLAGS: 00010246
> [   14.093284] RAX: 0000000000000000 RBX: ffff9f7a24d07980 RCX: ffffff8100000000
> [   14.093286] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
> [   14.093287] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000019
> [   14.093289] R10: 0000000000000774 R11: 0000000000000000 R12: 0000000000000000
> [   14.093291] R13: ffff9f7a2fab0400 R14: ffff9f7a21dd1140 R15: 00000000000000a0
> [   14.093294] FS:  0000000000000000(0000) GS:ffff9f7a2fa80000(0000) knlGS:0000000000000000
> [   14.093296] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   14.093298] CR2: 00000000000000a0 CR3: 00000004293d2003 CR4: 0000000000360ee0
> [   14.093307] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   14.093308] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [   14.093310] Call Trace:
> [   14.093324]  simple_recursive_removal+0x4e/0x2e0
> [   14.093330]  ? debugfs_remove+0x60/0x60
> [   14.093334]  debugfs_remove+0x40/0x60
> [   14.093339]  blk_trace_free+0x20/0x70
> [   14.093346]  __blk_trace_remove+0x54/0x90
> [   14.096704] === do_blk_trace_setup(6) start
> [   14.098534]  blk_trace_shutdown+0x74/0x80
> [   14.100958] === do_blk_trace_setup(6) creating directory
> [   14.104575]  __blk_release_queue+0xbe/0x160
> [   14.104580]  process_one_work+0x1b4/0x380
> [   14.104585]  worker_thread+0x50/0x3c0
> [   14.104589]  kthread+0xf9/0x130
> [   14.104593]  ? process_one_work+0x380/0x380
> [   14.104596]  ? kthread_park+0x90/0x90
> [   14.104599]  ret_from_fork+0x1f/0x40
> [   14.104603] Modules linked in: loop(E) xfs(E) libcrc32c(E)
> crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) joydev(E)
> serio_raw(E) aesni_intel(E) glue_helper(E) virtio_balloon(E) evdev(E)
> crypto_simd(E) pcspkr(E) cryptd(E) i6300esb(E) button(E) ip_tables(E)
> x_tables(E) autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E)
> jbd2(E) virtio_net(E) net_failover(E) failover(E) virtio_blk(E)
> ata_generic(E) uhci_hcd(E) ata_piix(E) ehci_hcd(E) nvme(E) libata(E)
> crc32c_intel(E) usbcore(E) psmouse(E) nvme_core(E) virtio_pci(E)
> scsi_mod(E) virtio_ring(E) t10_pi(E) virtio(E) i2c_piix4(E) floppy(E)
> [   14.107400] === do_blk_trace_setup(6) using what debugfs_lookup() gave
> [   14.108939] CR2: 00000000000000a0
> [   14.110589] === do_blk_trace_setup(6) end with ret: 0
> [   14.111592] ---[ end trace 7a783b33b9614db9 ]---
> 
> The root cause to this issue is that debugfs_lookup() can find a
> previous incarnation's dir of the same name which is about to get
> removed from a not yet schedule work.
> 
> We can fix the UAF by simply using a debugfs directory which moving
> forward will always be accessible if debugfs is enabled, this way,
> its allocated and avaialble always for both request-based block
> drivers or make_request drivers (multiqueue) block drivers.
> 
> This simplifies the code considerably, with the only penalty now being
> that we're always creating the request queue debugfs directory for the
> request-based block device drivers.

This patch is indeed a big simplification, just a minor comment.

> 
> The UAF then is not a core debugfs issue, but instead a misuse of
> debugfs, and this issue can only be triggered if you are root, and
> misuse blktrace.
> 
> This issue can be reproduced with break-blktrace [2] using:
> 
>   break-blktrace -c 10 -d -s
> 
> This patch fixes this issue. Note that there is also another
> respective UAF but from the ioctl path [3], this should also fix
> that issue.
> 
> This patch then also disputes the severity of CVE-2019-19770 as
> this issue is only possible by being root and using blktrace.
> 
> It is not a core debugfs issue.
> 
> [0] https://bugzilla.kernel.org/show_bug.cgi?id=205713
> [1] https://nvd.nist.gov/vuln/detail/CVE-2019-19770
> [2] https://github.com/mcgrof/break-blktrace
> [3] https://lore.kernel.org/lkml/000000000000ec635b059f752700@google.com/
> 
> Cc: Bart Van Assche <bvanassche@acm.org>
> Cc: Omar Sandoval <osandov@fb.com>
> Cc: Hannes Reinecke <hare@suse.com>
> Cc: Nicolai Stange <nstange@suse.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Michal Hocko <mhocko@kernel.org>
> Cc: yu kuai <yukuai3@huawei.com>
> Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com
> Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
> ---
>  block/blk-debugfs.c          | 12 ++++++++++++
>  block/blk-mq-debugfs.c       |  5 -----
>  block/blk-sysfs.c            |  3 +++
>  block/blk.h                  | 10 ++++++++++
>  include/linux/blkdev.h       |  5 ++++-
>  include/linux/blktrace_api.h |  1 -
>  kernel/trace/blktrace.c      | 19 ++++++++-----------
>  7 files changed, 37 insertions(+), 18 deletions(-)
> 
> diff --git a/block/blk-debugfs.c b/block/blk-debugfs.c
> index 19091e1effc0..db982688cf46 100644
> --- a/block/blk-debugfs.c
> +++ b/block/blk-debugfs.c
> @@ -13,3 +13,15 @@ void blk_debugfs_register(void)
>  {
>  	blk_debugfs_root = debugfs_create_dir("block", NULL);
>  }
> +
> +void blk_queue_debugfs_register(struct request_queue *q)
> +{
> +	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> +					    blk_debugfs_root);
> +}
> +
> +void blk_queue_debugfs_unregister(struct request_queue *q)
> +{
> +	debugfs_remove_recursive(q->debugfs_dir);
> +	q->debugfs_dir = NULL;
> +}
> diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
> index b3f2ba483992..bda9378eab90 100644
> --- a/block/blk-mq-debugfs.c
> +++ b/block/blk-mq-debugfs.c
> @@ -823,9 +823,6 @@ void blk_mq_debugfs_register(struct request_queue *q)
>  	struct blk_mq_hw_ctx *hctx;
>  	int i;
>  
> -	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> -					    blk_debugfs_root);
> -
>  	debugfs_create_files(q->debugfs_dir, q, blk_mq_debugfs_queue_attrs);
>  
>  	/*
> @@ -856,9 +853,7 @@ void blk_mq_debugfs_register(struct request_queue *q)
>  
>  void blk_mq_debugfs_unregister(struct request_queue *q)
>  {
> -	debugfs_remove_recursive(q->debugfs_dir);
>  	q->sched_debugfs_dir = NULL;
> -	q->debugfs_dir = NULL;
>  }
>  
>  static void blk_mq_debugfs_register_ctx(struct blk_mq_hw_ctx *hctx,
> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index fca9b158f4a0..0285d67e1e4c 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -895,6 +895,7 @@ static void __blk_release_queue(struct work_struct *work)
>  
>  	blk_trace_shutdown(q);
>  
> +	blk_queue_debugfs_unregister(q);
>  	if (queue_is_mq(q))
>  		blk_mq_debugfs_unregister(q);
>  
> @@ -975,6 +976,8 @@ int blk_register_queue(struct gendisk *disk)
>  		goto unlock;
>  	}
>  
> +	blk_queue_debugfs_register(q);
> +
>  	if (queue_is_mq(q)) {
>  		__blk_mq_register_dev(dev, q);
>  		blk_mq_debugfs_register(q);
> diff --git a/block/blk.h b/block/blk.h
> index 86a66b614f08..813b8513fc1a 100644
> --- a/block/blk.h
> +++ b/block/blk.h
> @@ -489,10 +489,20 @@ int __bio_add_pc_page(struct request_queue *q, struct bio *bio,
>  		bool *same_page);
>  #ifdef CONFIG_DEBUG_FS
>  void blk_debugfs_register(void);
> +void blk_queue_debugfs_register(struct request_queue *q);
> +void blk_queue_debugfs_unregister(struct request_queue *q);
>  #else
>  static inline void blk_debugfs_register(void)
>  {
>  }
> +
> +static inline void blk_queue_debugfs_register(struct request_queue *q)
> +{
> +}
> +
> +static inline void blk_queue_debugfs_unregister(struct request_queue *q)
> +{
> +}
>  #endif /* CONFIG_DEBUG_FS */
>  
>  #endif /* BLK_INTERNAL_H */
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index 32868fbedc9e..cc43c8e6516c 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -569,8 +569,11 @@ struct request_queue {
>  	struct list_head	tag_set_list;
>  	struct bio_set		bio_split;
>  
> -#ifdef CONFIG_BLK_DEBUG_FS
> +#ifdef CONFIG_DEBUG_FS
> +	/* Used by block/blk-*debugfs.c and kernel/trace/blktrace.c */
>  	struct dentry		*debugfs_dir;
> +#endif
> +#ifdef CONFIG_BLK_DEBUG_FS
>  	struct dentry		*sched_debugfs_dir;
>  	struct dentry		*rqos_debugfs_dir;
>  #endif
> diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
> index 3b6ff5902edc..eb6db276e293 100644
> --- a/include/linux/blktrace_api.h
> +++ b/include/linux/blktrace_api.h
> @@ -22,7 +22,6 @@ struct blk_trace {
>  	u64 end_lba;
>  	u32 pid;
>  	u32 dev;
> -	struct dentry *dir;
>  	struct dentry *dropped_file;
>  	struct dentry *msg_file;
>  	struct list_head running_list;
> diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
> index ca39dc3230cb..15086227592f 100644
> --- a/kernel/trace/blktrace.c
> +++ b/kernel/trace/blktrace.c
> @@ -311,7 +311,6 @@ static void blk_trace_free(struct blk_trace *bt)
>  	debugfs_remove(bt->msg_file);
>  	debugfs_remove(bt->dropped_file);
>  	relay_close(bt->rchan);
> -	debugfs_remove(bt->dir);
>  	free_percpu(bt->sequence);
>  	free_percpu(bt->msg_data);
>  	kfree(bt);
> @@ -476,7 +475,6 @@ static int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
>  			      struct blk_user_trace_setup *buts)
>  {
>  	struct blk_trace *bt = NULL;
> -	struct dentry *dir = NULL;
>  	int ret;
>  
>  	if (!buts->buf_size || !buts->buf_nr)
> @@ -485,6 +483,9 @@ static int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
>  	if (!blk_debugfs_root)
>  		return -ENOENT;
>  
> +	if (!q->debugfs_dir)
> +		return -ENOENT;
> +
>  	strncpy(buts->name, name, BLKTRACE_BDEV_SIZE);
>  	buts->name[BLKTRACE_BDEV_SIZE - 1] = '\0';
>  
> @@ -509,21 +510,19 @@ static int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
>  
>  	ret = -ENOENT;
>  
> -	dir = debugfs_lookup(buts->name, blk_debugfs_root);
> -	if (!dir)
> -		bt->dir = dir = debugfs_create_dir(buts->name, blk_debugfs_root);
> -
>  	bt->dev = dev;
>  	atomic_set(&bt->dropped, 0);
>  	INIT_LIST_HEAD(&bt->running_list);
>  
>  	ret = -EIO;
> -	bt->dropped_file = debugfs_create_file("dropped", 0444, dir, bt,
> +	bt->dropped_file = debugfs_create_file("dropped", 0444,
> +					       q->debugfs_dir, bt,
>  					       &blk_dropped_fops);
>  
> -	bt->msg_file = debugfs_create_file("msg", 0222, dir, bt, &blk_msg_fops);
> +	bt->msg_file = debugfs_create_file("msg", 0222, q->debugfs_dir,
> +					   bt, &blk_msg_fops);
>  
> -	bt->rchan = relay_open("trace", dir, buts->buf_size,
> +	bt->rchan = relay_open("trace", q->debugfs_dir, buts->buf_size,
>  				buts->buf_nr, &blk_relay_callbacks, bt);

In theory, multiple partitions can be traced concurrently, but looks
it never works, so it won't cause trouble for multiple partition trace.

One userspace visible change is that blktrace debugfs dir name is switched 
to disk name from partition name in case of partition trace, will it
break some utilities?

Thanks,
Ming
Luis Chamberlain April 16, 2020, 5:25 a.m. UTC | #10
On Thu, Apr 16, 2020 at 10:10:36AM +0800, Ming Lei wrote:
> In theory, multiple partitions can be traced concurrently, but looks
> it never works, so it won't cause trouble for multiple partition trace.
> 
> One userspace visible change is that blktrace debugfs dir name is switched 
> to disk name from partition name in case of partition trace, will it
> break some utilities?

How is this possible, its not clear to me, we go from:

-	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
-					    blk_debugfs_root);

To this:

+	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
+					    blk_debugfs_root);


Maybe I am overlooking something.

  Luis
Ming Lei April 16, 2020, 5:47 a.m. UTC | #11
On Thu, Apr 16, 2020 at 05:25:24AM +0000, Luis Chamberlain wrote:
> On Thu, Apr 16, 2020 at 10:10:36AM +0800, Ming Lei wrote:
> > In theory, multiple partitions can be traced concurrently, but looks
> > it never works, so it won't cause trouble for multiple partition trace.
> > 
> > One userspace visible change is that blktrace debugfs dir name is switched 
> > to disk name from partition name in case of partition trace, will it
> > break some utilities?
> 
> How is this possible, its not clear to me, we go from:
> 
> -	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> -					    blk_debugfs_root);
> 
> To this:
> 
> +	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> +					    blk_debugfs_root);
> 
> 
> Maybe I am overlooking something.

Your patch removes the blktrace debugfs dir:

do_blk_trace_setup()

-       dir = debugfs_lookup(buts->name, blk_debugfs_root);
-       if (!dir)
-               bt->dir = dir = debugfs_create_dir(buts->name, blk_debugfs_root);
-

Then create blktrace attributes under the dir of q->debugfs_dir.

However, buts->name could be one partition device name, but
q->debugfs_dir has to be disk name.

This change is visible to blktrace utilities.

Thanks,
Ming
Ming Lei April 16, 2020, 6:09 a.m. UTC | #12
On Thu, Apr 16, 2020 at 01:47:50PM +0800, Ming Lei wrote:
> On Thu, Apr 16, 2020 at 05:25:24AM +0000, Luis Chamberlain wrote:
> > On Thu, Apr 16, 2020 at 10:10:36AM +0800, Ming Lei wrote:
> > > In theory, multiple partitions can be traced concurrently, but looks
> > > it never works, so it won't cause trouble for multiple partition trace.
> > > 
> > > One userspace visible change is that blktrace debugfs dir name is switched 
> > > to disk name from partition name in case of partition trace, will it
> > > break some utilities?
> > 
> > How is this possible, its not clear to me, we go from:
> > 
> > -	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > -					    blk_debugfs_root);
> > 
> > To this:
> > 
> > +	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > +					    blk_debugfs_root);
> > 
> > 
> > Maybe I am overlooking something.
> 
> Your patch removes the blktrace debugfs dir:
> 
> do_blk_trace_setup()
> 
> -       dir = debugfs_lookup(buts->name, blk_debugfs_root);
> -       if (!dir)
> -               bt->dir = dir = debugfs_create_dir(buts->name, blk_debugfs_root);
> -
> 
> Then create blktrace attributes under the dir of q->debugfs_dir.
> 
> However, buts->name could be one partition device name, but
> q->debugfs_dir has to be disk name.
> 
> This change is visible to blktrace utilities.

Just test the 1st two patches via "blktrace /dev/sda2", follows the
result, so this way can't be accepted.

[root@ktest-01 ~]# blktrace /dev/sda2
Thread 0 failed open /sys/kernel/debug/block/sda2/trace0: 2/No such file or directory
Thread 4 failed open /sys/kernel/debug/block/sda2/trace4: 2/No such file or directory
Thread 1 failed open /sys/kernel/debug/block/sda2/trace1: 2/No such file or directory
Thread 2 failed open /sys/kernel/debug/block/sda2/trace2: 2/No such file or directory
Thread 5 failed open /sys/kernel/debug/block/sda2/trace5: 2/No such file or directory
Thread 3 failed open /sys/kernel/debug/block/sda2/trace3: 2/No such file or directory
Thread 6 failed open /sys/kernel/debug/block/sda2/trace6: 2/No such file or directory
Thread 7 failed open /sys/kernel/debug/block/sda2/trace7: 2/No such file or directory
FAILED to start thread on CPU 0: 1/Operation not permitted
FAILED to start thread on CPU 1: 1/Operation not permitted
FAILED to start thread on CPU 2: 1/Operation not permitted
FAILED to start thread on CPU 3: 1/Operation not permitted
FAILED to start thread on CPU 4: 1/Operation not permitted
FAILED to start thread on CPU 5: 1/Operation not permitted
FAILED to start thread on CPU 6: 1/Operation not permitted
FAILED to start thread on CPU 7: 1/Operation not permitted



Thanks, 
Ming
Luis Chamberlain April 16, 2020, 6:20 a.m. UTC | #13
On Thu, Apr 16, 2020 at 01:47:50PM +0800, Ming Lei wrote:
> On Thu, Apr 16, 2020 at 05:25:24AM +0000, Luis Chamberlain wrote:
> > On Thu, Apr 16, 2020 at 10:10:36AM +0800, Ming Lei wrote:
> > > In theory, multiple partitions can be traced concurrently, but looks
> > > it never works, so it won't cause trouble for multiple partition trace.
> > > 
> > > One userspace visible change is that blktrace debugfs dir name is switched 
> > > to disk name from partition name in case of partition trace, will it
> > > break some utilities?
> > 
> > How is this possible, its not clear to me, we go from:
> > 
> > -	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > -					    blk_debugfs_root);
> > 
> > To this:
> > 
> > +	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > +					    blk_debugfs_root);
> > 
> > 
> > Maybe I am overlooking something.
> 
> Your patch removes the blktrace debugfs dir:
> 
> do_blk_trace_setup()
> 
> -       dir = debugfs_lookup(buts->name, blk_debugfs_root);
> -       if (!dir)
> -               bt->dir = dir = debugfs_create_dir(buts->name, blk_debugfs_root);
> -
> 
> Then create blktrace attributes under the dir of q->debugfs_dir.
> 
> However, buts->name could be one partition device name, but

I can see how buts->name is set to bdevname() which expands to
disk_name(bdev->bd_disk, bdev->bd_part->partno, buf).

> q->debugfs_dir has to be disk name.

I can't see this, can you point me to where it is clear the
request_queue kobject's parent is sure to be the disk name?

If it is different, the issue I don't think should be debugfs, but
the bigger issue would be that blktrace on two different partitions
would clash.

Also, the *old* lookup intent on partitions always would fail on mq
and we'd end up creating a directory.

I think we'd need to create a directory per partition, even when we
don't use blktrace. That makes this more complex than I'd hope for.

  Luis
Luis Chamberlain April 16, 2020, 6:22 a.m. UTC | #14
On Thu, Apr 16, 2020 at 02:09:21PM +0800, Ming Lei wrote:
> On Thu, Apr 16, 2020 at 01:47:50PM +0800, Ming Lei wrote:
> > On Thu, Apr 16, 2020 at 05:25:24AM +0000, Luis Chamberlain wrote:
> > > On Thu, Apr 16, 2020 at 10:10:36AM +0800, Ming Lei wrote:
> > > > In theory, multiple partitions can be traced concurrently, but looks
> > > > it never works, so it won't cause trouble for multiple partition trace.
> > > > 
> > > > One userspace visible change is that blktrace debugfs dir name is switched 
> > > > to disk name from partition name in case of partition trace, will it
> > > > break some utilities?
> > > 
> > > How is this possible, its not clear to me, we go from:
> > > 
> > > -	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > > -					    blk_debugfs_root);
> > > 
> > > To this:
> > > 
> > > +	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > > +					    blk_debugfs_root);
> > > 
> > > 
> > > Maybe I am overlooking something.
> > 
> > Your patch removes the blktrace debugfs dir:
> > 
> > do_blk_trace_setup()
> > 
> > -       dir = debugfs_lookup(buts->name, blk_debugfs_root);
> > -       if (!dir)
> > -               bt->dir = dir = debugfs_create_dir(buts->name, blk_debugfs_root);
> > -
> > 
> > Then create blktrace attributes under the dir of q->debugfs_dir.
> > 
> > However, buts->name could be one partition device name, but
> > q->debugfs_dir has to be disk name.
> > 
> > This change is visible to blktrace utilities.
> 
> Just test the 1st two patches via "blktrace /dev/sda2", follows the
> result, so this way can't be accepted.
> 
> [root@ktest-01 ~]# blktrace /dev/sda2
> Thread 0 failed open /sys/kernel/debug/block/sda2/trace0: 2/No such file or directory
> Thread 4 failed open /sys/kernel/debug/block/sda2/trace4: 2/No such file or directory
> Thread 1 failed open /sys/kernel/debug/block/sda2/trace1: 2/No such file or directory
> Thread 2 failed open /sys/kernel/debug/block/sda2/trace2: 2/No such file or directory
> Thread 5 failed open /sys/kernel/debug/block/sda2/trace5: 2/No such file or directory
> Thread 3 failed open /sys/kernel/debug/block/sda2/trace3: 2/No such file or directory
> Thread 6 failed open /sys/kernel/debug/block/sda2/trace6: 2/No such file or directory
> Thread 7 failed open /sys/kernel/debug/block/sda2/trace7: 2/No such file or directory
> FAILED to start thread on CPU 0: 1/Operation not permitted
> FAILED to start thread on CPU 1: 1/Operation not permitted
> FAILED to start thread on CPU 2: 1/Operation not permitted
> FAILED to start thread on CPU 3: 1/Operation not permitted
> FAILED to start thread on CPU 4: 1/Operation not permitted
> FAILED to start thread on CPU 5: 1/Operation not permitted
> FAILED to start thread on CPU 6: 1/Operation not permitted
> FAILED to start thread on CPU 7: 1/Operation not permitted

Thanks, as I noted, I think we'd need to pre-create the directories per
parition. Let me know if you think of a better alternative.

  Luis
Ming Lei April 16, 2020, 6:28 a.m. UTC | #15
On Thu, Apr 16, 2020 at 06:20:54AM +0000, Luis Chamberlain wrote:
> On Thu, Apr 16, 2020 at 01:47:50PM +0800, Ming Lei wrote:
> > On Thu, Apr 16, 2020 at 05:25:24AM +0000, Luis Chamberlain wrote:
> > > On Thu, Apr 16, 2020 at 10:10:36AM +0800, Ming Lei wrote:
> > > > In theory, multiple partitions can be traced concurrently, but looks
> > > > it never works, so it won't cause trouble for multiple partition trace.
> > > > 
> > > > One userspace visible change is that blktrace debugfs dir name is switched 
> > > > to disk name from partition name in case of partition trace, will it
> > > > break some utilities?
> > > 
> > > How is this possible, its not clear to me, we go from:
> > > 
> > > -	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > > -					    blk_debugfs_root);
> > > 
> > > To this:
> > > 
> > > +	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > > +					    blk_debugfs_root);
> > > 
> > > 
> > > Maybe I am overlooking something.
> > 
> > Your patch removes the blktrace debugfs dir:
> > 
> > do_blk_trace_setup()
> > 
> > -       dir = debugfs_lookup(buts->name, blk_debugfs_root);
> > -       if (!dir)
> > -               bt->dir = dir = debugfs_create_dir(buts->name, blk_debugfs_root);
> > -
> > 
> > Then create blktrace attributes under the dir of q->debugfs_dir.
> > 
> > However, buts->name could be one partition device name, but
> 
> I can see how buts->name is set to bdevname() which expands to
> disk_name(bdev->bd_disk, bdev->bd_part->partno, buf).
> 
> > q->debugfs_dir has to be disk name.
> 
> I can't see this, can you point me to where it is clear the
> request_queue kobject's parent is sure to be the disk name?

blk_register_queue():
	...
	ret = kobject_add(&q->kobj, kobject_get(&dev->kobj), "%s", "queue");
	...
> 
> If it is different, the issue I don't think should be debugfs, but
> the bigger issue would be that blktrace on two different partitions
> would clash.
> 
> Also, the *old* lookup intent on partitions always would fail on mq
> and we'd end up creating a directory.
> 
> I think we'd need to create a directory per partition, even when we
> don't use blktrace. That makes this more complex than I'd hope for.

Anyway, the current ABI can't be broken, also I'd suggest to understand
how the userpace utility uses blktrace syscall interfaces first before
figuring any new approach.

Thanks, 
Ming
Luis Chamberlain April 17, 2020, 4:09 a.m. UTC | #16
On Thu, Apr 16, 2020 at 12:29 AM Ming Lei <ming.lei@redhat.com> wrote:
>
> On Thu, Apr 16, 2020 at 06:20:54AM +0000, Luis Chamberlain wrote:
> > On Thu, Apr 16, 2020 at 01:47:50PM +0800, Ming Lei wrote:
> > > On Thu, Apr 16, 2020 at 05:25:24AM +0000, Luis Chamberlain wrote:
> > > > On Thu, Apr 16, 2020 at 10:10:36AM +0800, Ming Lei wrote:
> > > > > In theory, multiple partitions can be traced concurrently, but looks
> > > > > it never works, so it won't cause trouble for multiple partition trace.
> > > > >
> > > > > One userspace visible change is that blktrace debugfs dir name is switched
> > > > > to disk name from partition name in case of partition trace, will it
> > > > > break some utilities?
> > > >
> > > > How is this possible, its not clear to me, we go from:
> > > >
> > > > - q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > > > -                                     blk_debugfs_root);
> > > >
> > > > To this:
> > > >
> > > > + q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
> > > > +                                     blk_debugfs_root);
> > > >
> > > >
> > > > Maybe I am overlooking something.
> > >
> > > Your patch removes the blktrace debugfs dir:
> > >
> > > do_blk_trace_setup()
> > >
> > > -       dir = debugfs_lookup(buts->name, blk_debugfs_root);
> > > -       if (!dir)
> > > -               bt->dir = dir = debugfs_create_dir(buts->name, blk_debugfs_root);
> > > -
> > >
> > > Then create blktrace attributes under the dir of q->debugfs_dir.
> > >
> > > However, buts->name could be one partition device name, but
> >
> > I can see how buts->name is set to bdevname() which expands to
> > disk_name(bdev->bd_disk, bdev->bd_part->partno, buf).
> >
> > > q->debugfs_dir has to be disk name.
> >
> > I can't see this, can you point me to where it is clear the
> > request_queue kobject's parent is sure to be the disk name?
>
> blk_register_queue():
>         ...
>         ret = kobject_add(&q->kobj, kobject_get(&dev->kobj), "%s", "queue");
>         ...

Alright, I have a fix for this now, and I do have also a further
explanation as to *why* the debugfs_lookup() doesn't help us here.
I'll follow up with more patches.

  Luis
diff mbox series

Patch

diff --git a/block/blk-debugfs.c b/block/blk-debugfs.c
index 19091e1effc0..db982688cf46 100644
--- a/block/blk-debugfs.c
+++ b/block/blk-debugfs.c
@@ -13,3 +13,15 @@  void blk_debugfs_register(void)
 {
 	blk_debugfs_root = debugfs_create_dir("block", NULL);
 }
+
+void blk_queue_debugfs_register(struct request_queue *q)
+{
+	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
+					    blk_debugfs_root);
+}
+
+void blk_queue_debugfs_unregister(struct request_queue *q)
+{
+	debugfs_remove_recursive(q->debugfs_dir);
+	q->debugfs_dir = NULL;
+}
diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
index b3f2ba483992..bda9378eab90 100644
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -823,9 +823,6 @@  void blk_mq_debugfs_register(struct request_queue *q)
 	struct blk_mq_hw_ctx *hctx;
 	int i;
 
-	q->debugfs_dir = debugfs_create_dir(kobject_name(q->kobj.parent),
-					    blk_debugfs_root);
-
 	debugfs_create_files(q->debugfs_dir, q, blk_mq_debugfs_queue_attrs);
 
 	/*
@@ -856,9 +853,7 @@  void blk_mq_debugfs_register(struct request_queue *q)
 
 void blk_mq_debugfs_unregister(struct request_queue *q)
 {
-	debugfs_remove_recursive(q->debugfs_dir);
 	q->sched_debugfs_dir = NULL;
-	q->debugfs_dir = NULL;
 }
 
 static void blk_mq_debugfs_register_ctx(struct blk_mq_hw_ctx *hctx,
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index fca9b158f4a0..0285d67e1e4c 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -895,6 +895,7 @@  static void __blk_release_queue(struct work_struct *work)
 
 	blk_trace_shutdown(q);
 
+	blk_queue_debugfs_unregister(q);
 	if (queue_is_mq(q))
 		blk_mq_debugfs_unregister(q);
 
@@ -975,6 +976,8 @@  int blk_register_queue(struct gendisk *disk)
 		goto unlock;
 	}
 
+	blk_queue_debugfs_register(q);
+
 	if (queue_is_mq(q)) {
 		__blk_mq_register_dev(dev, q);
 		blk_mq_debugfs_register(q);
diff --git a/block/blk.h b/block/blk.h
index 86a66b614f08..813b8513fc1a 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -489,10 +489,20 @@  int __bio_add_pc_page(struct request_queue *q, struct bio *bio,
 		bool *same_page);
 #ifdef CONFIG_DEBUG_FS
 void blk_debugfs_register(void);
+void blk_queue_debugfs_register(struct request_queue *q);
+void blk_queue_debugfs_unregister(struct request_queue *q);
 #else
 static inline void blk_debugfs_register(void)
 {
 }
+
+static inline void blk_queue_debugfs_register(struct request_queue *q)
+{
+}
+
+static inline void blk_queue_debugfs_unregister(struct request_queue *q)
+{
+}
 #endif /* CONFIG_DEBUG_FS */
 
 #endif /* BLK_INTERNAL_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 32868fbedc9e..cc43c8e6516c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -569,8 +569,11 @@  struct request_queue {
 	struct list_head	tag_set_list;
 	struct bio_set		bio_split;
 
-#ifdef CONFIG_BLK_DEBUG_FS
+#ifdef CONFIG_DEBUG_FS
+	/* Used by block/blk-*debugfs.c and kernel/trace/blktrace.c */
 	struct dentry		*debugfs_dir;
+#endif
+#ifdef CONFIG_BLK_DEBUG_FS
 	struct dentry		*sched_debugfs_dir;
 	struct dentry		*rqos_debugfs_dir;
 #endif
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 3b6ff5902edc..eb6db276e293 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -22,7 +22,6 @@  struct blk_trace {
 	u64 end_lba;
 	u32 pid;
 	u32 dev;
-	struct dentry *dir;
 	struct dentry *dropped_file;
 	struct dentry *msg_file;
 	struct list_head running_list;
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index ca39dc3230cb..15086227592f 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -311,7 +311,6 @@  static void blk_trace_free(struct blk_trace *bt)
 	debugfs_remove(bt->msg_file);
 	debugfs_remove(bt->dropped_file);
 	relay_close(bt->rchan);
-	debugfs_remove(bt->dir);
 	free_percpu(bt->sequence);
 	free_percpu(bt->msg_data);
 	kfree(bt);
@@ -476,7 +475,6 @@  static int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
 			      struct blk_user_trace_setup *buts)
 {
 	struct blk_trace *bt = NULL;
-	struct dentry *dir = NULL;
 	int ret;
 
 	if (!buts->buf_size || !buts->buf_nr)
@@ -485,6 +483,9 @@  static int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
 	if (!blk_debugfs_root)
 		return -ENOENT;
 
+	if (!q->debugfs_dir)
+		return -ENOENT;
+
 	strncpy(buts->name, name, BLKTRACE_BDEV_SIZE);
 	buts->name[BLKTRACE_BDEV_SIZE - 1] = '\0';
 
@@ -509,21 +510,19 @@  static int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
 
 	ret = -ENOENT;
 
-	dir = debugfs_lookup(buts->name, blk_debugfs_root);
-	if (!dir)
-		bt->dir = dir = debugfs_create_dir(buts->name, blk_debugfs_root);
-
 	bt->dev = dev;
 	atomic_set(&bt->dropped, 0);
 	INIT_LIST_HEAD(&bt->running_list);
 
 	ret = -EIO;
-	bt->dropped_file = debugfs_create_file("dropped", 0444, dir, bt,
+	bt->dropped_file = debugfs_create_file("dropped", 0444,
+					       q->debugfs_dir, bt,
 					       &blk_dropped_fops);
 
-	bt->msg_file = debugfs_create_file("msg", 0222, dir, bt, &blk_msg_fops);
+	bt->msg_file = debugfs_create_file("msg", 0222, q->debugfs_dir,
+					   bt, &blk_msg_fops);
 
-	bt->rchan = relay_open("trace", dir, buts->buf_size,
+	bt->rchan = relay_open("trace", q->debugfs_dir, buts->buf_size,
 				buts->buf_nr, &blk_relay_callbacks, bt);
 	if (!bt->rchan)
 		goto err;
@@ -551,8 +550,6 @@  static int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
 
 	ret = 0;
 err:
-	if (dir && !bt->dir)
-		dput(dir);
 	if (ret)
 		blk_trace_free(bt);
 	return ret;