diff mbox series

[6/8] drm: decouple from CONFIG_FB

Message ID 20200417155553.675905-7-arnd@arndb.de (mailing list archive)
State New, archived
Headers show
Series drm, fbdev: rework dependencies | expand

Commit Message

Arnd Bergmann April 17, 2020, 3:55 p.m. UTC
CONFIG_DRM_KMS_FB_HELPER selects CONFIG_FB, which is something it
really should not, to avoid circular dependencies and accidentally
including potentially dangerous user interfaces in the kernel,
so change this into a 'depends on' check.

Two device drivers currently select CONFIG_DRM_KMS_FB_HELPER, but
as far as I can tell, they do not really need to any more, so those
selects can be removed.

This leaves DRM_FBDEV_EMULATION as the only thing that rightfully
selects CONFIG_DRM_KMS_FB_HELPER, and this now has to depend on
CONFIG_FB and its dependencies.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/gpu/drm/Kconfig       | 5 +++--
 drivers/gpu/drm/mxsfb/Kconfig | 1 -
 drivers/gpu/drm/zte/Kconfig   | 1 -
 3 files changed, 3 insertions(+), 4 deletions(-)

Comments

Sam Ravnborg April 17, 2020, 4:50 p.m. UTC | #1
Hi Arnd.

On Fri, Apr 17, 2020 at 05:55:51PM +0200, Arnd Bergmann wrote:
> CONFIG_DRM_KMS_FB_HELPER selects CONFIG_FB, which is something it
> really should not, to avoid circular dependencies and accidentally
> including potentially dangerous user interfaces in the kernel,
> so change this into a 'depends on' check.
> 
> Two device drivers currently select CONFIG_DRM_KMS_FB_HELPER, but
> as far as I can tell, they do not really need to any more, so those
> selects can be removed.
> 
> This leaves DRM_FBDEV_EMULATION as the only thing that rightfully
> selects CONFIG_DRM_KMS_FB_HELPER, and this now has to depend on
> CONFIG_FB and its dependencies.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  drivers/gpu/drm/Kconfig       | 5 +++--
>  drivers/gpu/drm/mxsfb/Kconfig | 1 -
>  drivers/gpu/drm/zte/Kconfig   | 1 -
>  3 files changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 43594978958e..7c3109133685 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -80,7 +80,7 @@ config DRM_KMS_HELPER
>  config DRM_KMS_FB_HELPER
>  	bool
>  	depends on DRM_KMS_HELPER
> -	select FB
> +	depends on FB
>  	select FRAMEBUFFER_CONSOLE if !EXPERT
>  	select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
>  	select FB_SYS_FOPS
> @@ -111,7 +111,8 @@ config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
>  
>  config DRM_FBDEV_EMULATION
>  	bool "Enable legacy fbdev support for your modesetting driver"
> -	depends on DRM
> +	depends on DRM && FB
> +	depends on FB=y || DRM=m
>  	select DRM_KMS_HELPER
>  	select DRM_KMS_FB_HELPER
>  	default y
This statement:

	depends on DRM && FB

tell us that both symbols must be either y or m. Any combination of y
and m will do the trick


Then we have this statement:

	depends on FB=y || DRM=m

It tells us that either FB equals y or DRM equals m.

So we have following table

	FB	DRM	Result
	n	n	n
	n	y	n
	n	m	n
	y	n	n
	y	y	y
	y	m	y
	m	n	n
	m	y	N
	m	m	y

So what this try to say is that we cannot have FB a module while DRM is
built-in (marked N in the above).

Could you explain in the changelog why this combination is not good.
(Or tell me if my analysis was flawed).

With this fixed (assuming I am right):
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

	Sam

> diff --git a/drivers/gpu/drm/mxsfb/Kconfig b/drivers/gpu/drm/mxsfb/Kconfig
> index 0dca8f27169e..33916b7b2c50 100644
> --- a/drivers/gpu/drm/mxsfb/Kconfig
> +++ b/drivers/gpu/drm/mxsfb/Kconfig
> @@ -10,7 +10,6 @@ config DRM_MXSFB
>  	depends on COMMON_CLK
>  	select DRM_MXS
>  	select DRM_KMS_HELPER
> -	select DRM_KMS_FB_HELPER
>  	select DRM_KMS_CMA_HELPER
>  	select DRM_PANEL
>  	help
> diff --git a/drivers/gpu/drm/zte/Kconfig b/drivers/gpu/drm/zte/Kconfig
> index 90ebaedc11fd..aa8594190b50 100644
> --- a/drivers/gpu/drm/zte/Kconfig
> +++ b/drivers/gpu/drm/zte/Kconfig
> @@ -3,7 +3,6 @@ config DRM_ZTE
>  	tristate "DRM Support for ZTE SoCs"
>  	depends on DRM && ARCH_ZX
>  	select DRM_KMS_CMA_HELPER
> -	select DRM_KMS_FB_HELPER
>  	select DRM_KMS_HELPER
>  	select SND_SOC_HDMI_CODEC if SND_SOC
>  	select VIDEOMODE_HELPERS
> -- 
> 2.26.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Arnd Bergmann April 17, 2020, 8:03 p.m. UTC | #2
On Fri, Apr 17, 2020 at 6:50 PM Sam Ravnborg <sam@ravnborg.org> wrote:

>
> So what this try to say is that we cannot have FB a module while DRM is
> built-in (marked N in the above).

Correct

>
> Could you explain in the changelog why this combination is not good.
> (Or tell me if my analysis was flawed).

I agree in hindsight this was less obvious than I thought ;-)

Added this text to the changelog:

|  When CONFIG_FB is a loadable module, DRM_KMS_FB_HELPER cannot be
| part of the built-in subsystem, so add dependency to ensure this
| can only be enabled if the DRM module can successfully be linked.

and this comment in the Kconfig file:

@@ -112,7 +112,7 @@ config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
 config DRM_FBDEV_EMULATION
        bool "Enable legacy fbdev support for your modesetting driver"
        depends on DRM && FB
-       depends on FB=y || DRM=m
+       depends on FB=y || DRM=m # DRM_KMS_FB_HELPER links against FB
        select DRM_KMS_HELPER
        select DRM_KMS_FB_HELPER
        default y

Let me know if you think those changes are sufficient

> With this fixed (assuming I am right):
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

Thanks!

        Arnd
Sam Ravnborg April 17, 2020, 8:29 p.m. UTC | #3
Hi Arnd.

On Fri, Apr 17, 2020 at 10:03:23PM +0200, Arnd Bergmann wrote:
> On Fri, Apr 17, 2020 at 6:50 PM Sam Ravnborg <sam@ravnborg.org> wrote:
> 
> >
> > So what this try to say is that we cannot have FB a module while DRM is
> > built-in (marked N in the above).
> 
> Correct
> 
> >
> > Could you explain in the changelog why this combination is not good.
> > (Or tell me if my analysis was flawed).
> 
> I agree in hindsight this was less obvious than I thought ;-)
> 
> Added this text to the changelog:
> 
> |  When CONFIG_FB is a loadable module, DRM_KMS_FB_HELPER cannot be
> | part of the built-in subsystem, so add dependency to ensure this
> | can only be enabled if the DRM module can successfully be linked.
> 
> and this comment in the Kconfig file:
> 
> @@ -112,7 +112,7 @@ config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
>  config DRM_FBDEV_EMULATION
>         bool "Enable legacy fbdev support for your modesetting driver"
>         depends on DRM && FB
> -       depends on FB=y || DRM=m
> +       depends on FB=y || DRM=m # DRM_KMS_FB_HELPER links against FB
>         select DRM_KMS_HELPER
>         select DRM_KMS_FB_HELPER
>         default y
> 
> Let me know if you think those changes are sufficient
> 
> > With this fixed (assuming I am right):
> > Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

Yes, that explains it nicely - thanks.
But unless Daniel decides otherwise we do not get it applied.
He was not too happy with it.

	Sam
diff mbox series

Patch

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 43594978958e..7c3109133685 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -80,7 +80,7 @@  config DRM_KMS_HELPER
 config DRM_KMS_FB_HELPER
 	bool
 	depends on DRM_KMS_HELPER
-	select FB
+	depends on FB
 	select FRAMEBUFFER_CONSOLE if !EXPERT
 	select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
 	select FB_SYS_FOPS
@@ -111,7 +111,8 @@  config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
 
 config DRM_FBDEV_EMULATION
 	bool "Enable legacy fbdev support for your modesetting driver"
-	depends on DRM
+	depends on DRM && FB
+	depends on FB=y || DRM=m
 	select DRM_KMS_HELPER
 	select DRM_KMS_FB_HELPER
 	default y
diff --git a/drivers/gpu/drm/mxsfb/Kconfig b/drivers/gpu/drm/mxsfb/Kconfig
index 0dca8f27169e..33916b7b2c50 100644
--- a/drivers/gpu/drm/mxsfb/Kconfig
+++ b/drivers/gpu/drm/mxsfb/Kconfig
@@ -10,7 +10,6 @@  config DRM_MXSFB
 	depends on COMMON_CLK
 	select DRM_MXS
 	select DRM_KMS_HELPER
-	select DRM_KMS_FB_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_PANEL
 	help
diff --git a/drivers/gpu/drm/zte/Kconfig b/drivers/gpu/drm/zte/Kconfig
index 90ebaedc11fd..aa8594190b50 100644
--- a/drivers/gpu/drm/zte/Kconfig
+++ b/drivers/gpu/drm/zte/Kconfig
@@ -3,7 +3,6 @@  config DRM_ZTE
 	tristate "DRM Support for ZTE SoCs"
 	depends on DRM && ARCH_ZX
 	select DRM_KMS_CMA_HELPER
-	select DRM_KMS_FB_HELPER
 	select DRM_KMS_HELPER
 	select SND_SOC_HDMI_CODEC if SND_SOC
 	select VIDEOMODE_HELPERS