diff mbox series

[v6,3/5] remoteproc: Add support for runtime PM

Message ID 20200417170040.174319-3-paul@crapouillou.net (mailing list archive)
State Superseded
Headers show
Series [v6,1/5] dt-bindings: Document JZ47xx VPU auxiliary processor | expand

Commit Message

Paul Cercueil April 17, 2020, 5 p.m. UTC 
Call pm_runtime_get_sync() before the firmware is loaded, and
pm_runtime_put() after the remote processor has been stopped.

Even though the remoteproc device has no PM callbacks, this allows the
parent device's PM callbacks to be properly called.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v2-v4: No change
    v5: Move calls to prepare/unprepare to rproc_fw_boot/rproc_shutdown
    v6: Instead of prepare/unprepare callbacks, use PM runtime callbacks

 drivers/remoteproc/remoteproc_core.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

Comments

Bjorn Andersson April 20, 2020, 6:49 a.m. UTC | #1 
On Fri 17 Apr 10:00 PDT 2020, Paul Cercueil wrote:

> Call pm_runtime_get_sync() before the firmware is loaded, and
> pm_runtime_put() after the remote processor has been stopped.
> 
> Even though the remoteproc device has no PM callbacks, this allows the
> parent device's PM callbacks to be properly called.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> 
> Notes:
>     v2-v4: No change
>     v5: Move calls to prepare/unprepare to rproc_fw_boot/rproc_shutdown
>     v6: Instead of prepare/unprepare callbacks, use PM runtime callbacks
> 
>  drivers/remoteproc/remoteproc_core.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index a7f96bc98406..d391b054efd8 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -29,6 +29,7 @@
>  #include <linux/devcoredump.h>
>  #include <linux/rculist.h>
>  #include <linux/remoteproc.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/iommu.h>
>  #include <linux/idr.h>
>  #include <linux/elf.h>
> @@ -1384,6 +1385,8 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
>  
>  	dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
>  
> +	pm_runtime_get_sync(dev);

This can return an error, should we ignore this?

Apart from that this looks good.

Regards,
Bjorn

> +
>  	/*
>  	 * if enabling an IOMMU isn't relevant for this rproc, this is
>  	 * just a nop
> @@ -1391,7 +1394,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
>  	ret = rproc_enable_iommu(rproc);
>  	if (ret) {
>  		dev_err(dev, "can't enable iommu: %d\n", ret);
> -		return ret;
> +		goto put_pm_runtime;
>  	}
>  
>  	rproc->bootaddr = rproc_get_boot_addr(rproc, fw);
> @@ -1435,6 +1438,8 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
>  	rproc->table_ptr = NULL;
>  disable_iommu:
>  	rproc_disable_iommu(rproc);
> +put_pm_runtime:
> +	pm_runtime_put(dev);
>  	return ret;
>  }
>  
> @@ -1840,6 +1845,8 @@ void rproc_shutdown(struct rproc *rproc)
>  
>  	rproc_disable_iommu(rproc);
>  
> +	pm_runtime_put(dev);
> +
>  	/* Free the copy of the resource table */
>  	kfree(rproc->cached_table);
>  	rproc->cached_table = NULL;
> @@ -2118,6 +2125,9 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
>  
>  	rproc->state = RPROC_OFFLINE;
>  
> +	pm_runtime_no_callbacks(&rproc->dev);
> +	pm_runtime_enable(&rproc->dev);
> +
>  	return rproc;
>  }
>  EXPORT_SYMBOL(rproc_alloc);
> @@ -2133,6 +2143,7 @@ EXPORT_SYMBOL(rproc_alloc);
>   */
>  void rproc_free(struct rproc *rproc)
>  {
> +	pm_runtime_disable(&rproc->dev);
>  	put_device(&rproc->dev);
>  }
>  EXPORT_SYMBOL(rproc_free);
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index a7f96bc98406..d391b054efd8 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -29,6 +29,7 @@ 
 #include <linux/devcoredump.h>
 #include <linux/rculist.h>
 #include <linux/remoteproc.h>
+#include <linux/pm_runtime.h>
 #include <linux/iommu.h>
 #include <linux/idr.h>
 #include <linux/elf.h>
@@ -1384,6 +1385,8 @@  static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 
 	dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
 
+	pm_runtime_get_sync(dev);
+
 	/*
 	 * if enabling an IOMMU isn't relevant for this rproc, this is
 	 * just a nop
@@ -1391,7 +1394,7 @@  static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	ret = rproc_enable_iommu(rproc);
 	if (ret) {
 		dev_err(dev, "can't enable iommu: %d\n", ret);
-		return ret;
+		goto put_pm_runtime;
 	}
 
 	rproc->bootaddr = rproc_get_boot_addr(rproc, fw);
@@ -1435,6 +1438,8 @@  static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	rproc->table_ptr = NULL;
 disable_iommu:
 	rproc_disable_iommu(rproc);
+put_pm_runtime:
+	pm_runtime_put(dev);
 	return ret;
 }
 
@@ -1840,6 +1845,8 @@  void rproc_shutdown(struct rproc *rproc)
 
 	rproc_disable_iommu(rproc);
 
+	pm_runtime_put(dev);
+
 	/* Free the copy of the resource table */
 	kfree(rproc->cached_table);
 	rproc->cached_table = NULL;
@@ -2118,6 +2125,9 @@  struct rproc *rproc_alloc(struct device *dev, const char *name,
 
 	rproc->state = RPROC_OFFLINE;
 
+	pm_runtime_no_callbacks(&rproc->dev);
+	pm_runtime_enable(&rproc->dev);
+
 	return rproc;
 }
 EXPORT_SYMBOL(rproc_alloc);
@@ -2133,6 +2143,7 @@  EXPORT_SYMBOL(rproc_alloc);
  */
 void rproc_free(struct rproc *rproc)
 {
+	pm_runtime_disable(&rproc->dev);
 	put_device(&rproc->dev);
 }
 EXPORT_SYMBOL(rproc_free);