[09/13] MIPS: ingenic: DTS: Update JZ4770 support

Commit Message

Paul Cercueil April 13, 2020, 3:26 p.m. UTC

Add support for the RTC, AIC, CODEC, MMC 0/1/2, ADC, GPU, LCD,
USB OTG, USB PHY controllers.

Signed-off-by: Paul Cercueil <[e-mail]>
---
 arch/mips/boot/dts/ingenic/jz4770.dtsi | 177 ++++++++++++++++++++++++-
 1 file changed, 170 insertions(+), 7 deletions(-)

Comments

Thomas Bogendoerfer April 29, 2020, 9:05 p.m. UTC | #1

On Mon, Apr 13, 2020 at 05:26:29PM +0200, Paul Cercueil wrote:
> Add support for the RTC, AIC, CODEC, MMC 0/1/2, ADC, GPU, LCD,
> USB OTG, USB PHY controllers.
> 
> Signed-off-by: Paul Cercueil <[e-mail]>
> ---
>  arch/mips/boot/dts/ingenic/jz4770.dtsi | 177 ++++++++++++++++++++++++-
>  1 file changed, 170 insertions(+), 7 deletions(-)

applied to mips-next.

Thomas.

Patch

diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 3024c360c3ca..fa11ac950499 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -38,13 +38,25 @@  osc32k: osc32k {
 	};
 
 	cgu: jz4770-cgu@10000000 {
-		compatible = "ingenic,jz4770-cgu";
+		compatible = "ingenic,jz4770-cgu", "simple-mfd";
 		reg = <0x10000000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10000000 0x100>;
 
 		clocks = <&ext>, <&osc32k>;
 		clock-names = "ext", "osc32k";
 
 		#clock-cells = <1>;
+
+		otg_phy: usb-phy@3c {
+			compatible = "ingenic,jz4770-phy";
+			reg = <0x3c 0x10>;
+
+			clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+			#phy-cells = <0>;
+		};
 	};
 
 	tcu: timer@10002000 {
@@ -101,6 +113,14 @@  ost: timer@e0 {
 		};
 	};
 
+	rtc: rtc@10003000 {
+		compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
+		reg = <0x10003000 0x40>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
+	};
+
 	pinctrl: pin-controller@10010000 {
 		compatible = "ingenic,jz4770-pinctrl";
 		reg = <0x10010000 0x600>;
@@ -199,6 +219,93 @@  gpf: gpio@5 {
 		};
 	};
 
+	aic: audio-controller@10020000 {
+		compatible = "ingenic,jz4770-i2s";
+		reg = <0x10020000 0x94>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>,
+			 <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>;
+		clock-names = "aic", "i2s", "ext", "pll half";
+
+		interrupt-parent = <&intc>;
+		interrupts = <34>;
+
+		dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
+		dma-names = "rx", "tx";
+	};
+
+	codec: audio-codec@100200a0 {
+		compatible = "ingenic,jz4770-codec";
+		reg = <0x100200a4 0x8>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4770_CLK_AIC>;
+		clock-names = "aic";
+	};
+
+	mmc0: mmc@10021000 {
+		compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+		reg = <0x10021000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_MMC0>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		status = "disabled";
+	};
+
+	mmc1: mmc@10022000 {
+		compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+		reg = <0x10022000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_MMC1>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		status = "disabled";
+	};
+
+	mmc2: mmc@10023000 {
+		compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+		reg = <0x10023000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_MMC2>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <35>;
+
+		dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		status = "disabled";
+	};
+
 	uart0: serial@10030000 {
 		compatible = "ingenic,jz4770-uart";
 		reg = <0x10030000 0x100>;
@@ -251,6 +358,43 @@  uart3: serial@10033000 {
 		status = "disabled";
 	};
 
+	adc: adc@10070000 {
+		compatible = "ingenic,jz4770-adc";
+		reg = <0x10070000 0x30>;
+
+		#io-channel-cells = <1>;
+
+		clocks = <&cgu JZ4770_CLK_ADC>;
+		clock-names = "adc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+	gpu: gpu@13040000 {
+		compatible = "vivante,gc";
+		reg = <0x13040000 0x10000>;
+
+		clocks = <&cgu JZ4770_CLK_GPU>,
+			 <&cgu JZ4770_CLK_GPU>,
+			 <&cgu JZ4770_CLK_GPU>;
+		clock-names = "bus", "core", "shader";
+
+		interrupt-parent = <&intc>;
+		interrupts = <6>;
+	};
+
+	lcd: lcd-controller@13050000 {
+		compatible = "ingenic,jz4770-lcd";
+		reg = <0x13050000 0x300>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <31>;
+
+		clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
+		clock-names = "lcd_pclk";
+	};
+
 	dmac0: dma-controller@13420000 {
 		compatible = "ingenic,jz4770-dma";
 		reg = <0x13420000 0xC0>, <0x13420300 0x20>;
@@ -260,9 +404,6 @@  dmac0: dma-controller@13420000 {
 		clocks = <&cgu JZ4770_CLK_DMA>;
 		interrupt-parent = <&intc>;
 		interrupts = <24>;
-
-		/* Disable dmac0 until we have something that uses it */
-		status = "disabled";
 	};
 
 	dmac1: dma-controller@13420100 {
@@ -274,9 +415,6 @@  dmac1: dma-controller@13420100 {
 		clocks = <&cgu JZ4770_CLK_DMA>;
 		interrupt-parent = <&intc>;
 		interrupts = <23>;
-
-		/* Disable dmac1 until we have something that uses it */
-		status = "disabled";
 	};
 
 	uhc: uhc@13430000 {
@@ -292,4 +430,29 @@  uhc: uhc@13430000 {
 
 		status = "disabled";
 	};
+
+	usb_otg: usb@13440000 {
+		compatible = "ingenic,jz4770-musb";
+		reg = <0x13440000 0x10000>;
+
+		clocks = <&cgu JZ4770_CLK_OTG>;
+		clock-names = "udc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <21>;
+		interrupt-names = "mc";
+
+		phys = <&otg_phy>;
+
+		usb-role-switch;
+	};
+
+	rom: memory@1fc00000 {
+		compatible = "mtd-rom";
+		probe-type = "map_rom";
+		reg = <0x1fc00000 0x2000>;
+
+		bank-width = <4>;
+		device-width = <1>;
+	};
 };