Message ID | 20200424135303.20952-1-a.filippov@yadro.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v5] ARM: DTS: Aspeed: Add YADRO Nicole BMC | expand |
On Fri, 24 Apr 2020 at 13:53, Alexander Filippov <a.filippov@yadro.com> wrote: > > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > by YADRO. > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> This looks good to me. Andrew, do you have any comments before I merge? > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 316 ++++++++++++++++++++ > 2 files changed, 317 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index e8dd99201397..6f9fe0f959f2 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1347,6 +1347,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-microsoft-olympus.dtb \ > aspeed-bmc-opp-lanyang.dtb \ > aspeed-bmc-opp-mihawk.dtb \ > + aspeed-bmc-opp-nicole.dtb \ > aspeed-bmc-opp-palmetto.dtb \ > aspeed-bmc-opp-romulus.dtb \ > aspeed-bmc-opp-swift.dtb \ > diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts > new file mode 100644 > index 000000000000..31b7e83adc46 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts > @@ -0,0 +1,316 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +// Copyright 2019 YADRO > +/dts-v1/; > +#include "aspeed-g5.dtsi" > +#include <dt-bindings/gpio/aspeed-gpio.h> > + > +/ { > + model = "Nicole BMC"; > + compatible = "yadro,nicole-bmc", "aspeed,ast2500"; > + > + chosen { > + stdout-path = &uart5; > + bootargs = "console=ttyS4,115200 earlyprintk"; > + }; > + > + memory@80000000 { > + reg = <0x80000000 0x20000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + vga_memory: framebuffer@9f000000 { > + no-map; > + reg = <0x9f000000 0x01000000>; /* 16M */ > + }; > + > + flash_memory: region@98000000 { > + no-map; > + reg = <0x98000000 0x04000000>; /* 64M */ > + }; > + > + coldfire_memory: codefire_memory@9ef00000 { > + reg = <0x9ef00000 0x00100000>; > + no-map; > + }; > + > + gfx_memory: framebuffer { > + size = <0x01000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + video_engine_memory: jpegbuffer { > + size = <0x02000000>; /* 32M */ > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + power { > + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>; > + }; > + > + identify { > + gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; > + }; > + > + alarm_red { > + gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>; > + }; > + > + alarm_yellow { > + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + fsi: gpio-fsi { > + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; > + #address-cells = <2>; > + #size-cells = <0>; > + no-gpio-delays; > + > + memory-region = <&coldfire_memory>; > + aspeed,sram = <&sram>; > + aspeed,cvic = <&cvic>; > + > + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; > + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; > + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; > + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; > + trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + checkstop { > + label = "checkstop"; > + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(J, 2)>; > + }; > + }; > + > + iio-hwmon-battery { > + compatible = "iio-hwmon"; > + io-channels = <&adc 12>; > + }; > +}; > + > +&fmc { > + status = "okay"; > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "bmc"; > + spi-max-frequency = <50000000>; > +#include "openbmc-flash-layout.dtsi" > + }; > +}; > + > +&spi1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1_default>; > + > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "pnor"; > + spi-max-frequency = <100000000>; > + }; > +}; > + > +&lpc_ctrl { > + status = "okay"; > + memory-region = <&flash_memory>; > + flash = <&spi1>; > +}; > + > +&uart1 { > + /* Rear RS-232 connector */ > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd1_default > + &pinctrl_rxd1_default > + &pinctrl_nrts1_default > + &pinctrl_ndtr1_default > + &pinctrl_ndsr1_default > + &pinctrl_ncts1_default > + &pinctrl_ndcd1_default > + &pinctrl_nri1_default>; > +}; > + > +&uart5 { > + status = "okay"; > +}; > + > +&mac0 { > + status = "okay"; > + > + use-ncsi; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rmii1_default>; > + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, > + <&syscon ASPEED_CLK_MAC1RCLK>; > + clock-names = "MACCLK", "RCLK"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + eeprom@50 { > + compatible = "atmel,24c256"; > + reg = <0x50>; > + pagesize = <64>; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + /* CPU0 characterization connector */ > +}; > + > +&i2c3 { > + status = "okay"; > + /* CLK GEN SI5338 */ > +}; > + > +&i2c4 { > + status = "okay"; > + /* Voltage regulators for CPU0 */ > +}; > + > +&i2c5 { > + status = "okay"; > + /* Voltage regulators for CPU1 */ > +}; > + > +&i2c6 { > + status = "okay"; > + > + rtc@32 { > + compatible = "epson,rx8900"; > + reg = <0x32>; > + }; > +}; > + > +&i2c7 { > + status = "okay"; > + /* CPLD */ > +}; > + > +&gpio { > + gpio-line-names = > + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", > + /*B0-B7*/ "","","","","","","","", > + /*C0-C7*/ "","","","","","","","", > + /*D0-D7*/ "fsi-enable","","","nic_func_mode0","nic_func_mode1","","","", > + /*E0-E7*/ "","ncsi_cfg","","","","","","", > + /*F0-F7*/ "","","","","","","","", > + /*G0-G7*/ "","","","","","","","", > + /*H0-H7*/ "","","","","","","","", > + /*I0-I7*/ "","","","","","","","", > + /*J0-J7*/ "","","checkstop","","","","","", > + /*K0-K7*/ "","","","","","","","", > + /*L0-L7*/ "","","","","","","","", > + /*M0-M7*/ "","","","","","","","", > + /*N0-N7*/ "","","","","","","","", > + /*O0-O7*/ "","","id-button","","","","","", > + /*P0-P7*/ "","fsi-trans","","","","","","", > + /*Q0-Q7*/ "","","","","","","","", > + /*R0-R7*/ "","","","","","","","", > + /*S0-S7*/ "","","","","","","","seq_cont", > + /*T0-T7*/ "","","","","","","","", > + /*U0-U7*/ "","","","","","","","", > + /*V0-V7*/ "","","","","","","","", > + /*W0-W7*/ "","","","","","","","", > + /*X0-X7*/ "","","","","","","","", > + /*Y0-Y7*/ "","","","","","","","", > + /*Z0-Z7*/ "","","","","","","","", > + /*AA0-AA7*/ "fsi-clock","led_alarm_yellow","fsi-data","led_alarm_red", > + "led_power","","","led_identify", > + /*AB0-AB7*/ "","","","","","","","", > + /*AC0-AC7*/ "","","","","","","",""; > + > + nic_func_mode0 { > + gpio-hog; > + gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>; > + output-low; > + }; > + nic_func_mode1 { > + gpio-hog; > + gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>; > + output-low; > + }; > + seq_cont { > + gpio-hog; > + gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; > + output-low; > + }; > + ncsi_cfg { > + gpio-hog; > + input; > + gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>; > + }; > +}; > + > +&vuart { > + status = "okay"; > +}; > + > +&gfx { > + status = "okay"; > + memory-region = <&gfx_memory>; > +}; > + > +&pinctrl { > + aspeed,external-nodes = <&gfx &lhc>; > +}; > + > +&ibt { > + status = "okay"; > +}; > + > +&vhub { > + status = "okay"; > +}; > + > +&adc { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc0_default > + &pinctrl_adc1_default > + &pinctrl_adc2_default > + &pinctrl_adc3_default > + &pinctrl_adc4_default > + &pinctrl_adc5_default > + &pinctrl_adc6_default > + &pinctrl_adc7_default > + &pinctrl_adc8_default > + &pinctrl_adc9_default > + &pinctrl_adc10_default > + &pinctrl_adc11_default > + &pinctrl_adc12_default > + &pinctrl_adc13_default > + &pinctrl_adc14_default > + &pinctrl_adc15_default>; > +}; > + > +&video { > + status = "okay"; > + memory-region = <&video_engine_memory>; > +}; > + > +#include "ibm-power9-dual.dtsi" > -- > 2.21.1 >
On Mon, 27 Apr 2020, at 20:41, Joel Stanley wrote: > On Fri, 24 Apr 2020 at 13:53, Alexander Filippov <a.filippov@yadro.com> wrote: > > > > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > > by YADRO. > > > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > > This looks good to me. > > Andrew, do you have any comments before I merge? Not other than muxing all the ADC lines to enable just one seems a bit strange, but Alexander mentioned previously that the rest were simply grounded so it's not going to cause any problems in practice. Andrew
On Mon, 4 May 2020 at 11:04, Andrew Jeffery <andrew@aj.id.au> wrote: > > > > On Mon, 27 Apr 2020, at 20:41, Joel Stanley wrote: > > On Fri, 24 Apr 2020 at 13:53, Alexander Filippov <a.filippov@yadro.com> wrote: > > > > > > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > > > by YADRO. > > > > > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > > > > This looks good to me. > > > > Andrew, do you have any comments before I merge? > > Not other than muxing all the ADC lines to enable just one seems a bit strange, > but Alexander mentioned previously that the rest were simply grounded so it's > not going to cause any problems in practice. Thanks. Can you say the magic words for patchwork to pick up?
On Mon, 4 May 2020, at 22:14, Joel Stanley wrote: > On Mon, 4 May 2020 at 11:04, Andrew Jeffery <andrew@aj.id.au> wrote: > > > > > > > > On Mon, 27 Apr 2020, at 20:41, Joel Stanley wrote: > > > On Fri, 24 Apr 2020 at 13:53, Alexander Filippov <a.filippov@yadro.com> wrote: > > > > > > > > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > > > > by YADRO. > > > > > > > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > > > > > > This looks good to me. > > > > > > Andrew, do you have any comments before I merge? > > > > Not other than muxing all the ADC lines to enable just one seems a bit strange, > > but Alexander mentioned previously that the rest were simply grounded so it's > > not going to cause any problems in practice. > > Thanks. Can you say the magic words for patchwork to pick up? > Acked-by: Andrew Jeffery <andrew@aj.id.au>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd99201397..6f9fe0f959f2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1347,6 +1347,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ + aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-swift.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts new file mode 100644 index 000000000000..31b7e83adc46 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 YADRO +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Nicole BMC"; + compatible = "yadro,nicole-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; + }; + + alarm_red { + gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>; + }; + + alarm_yellow { + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>; + }; + }; + + fsi: gpio-fsi { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c2 { + status = "okay"; + /* CPU0 characterization connector */ +}; + +&i2c3 { + status = "okay"; + /* CLK GEN SI5338 */ +}; + +&i2c4 { + status = "okay"; + /* Voltage regulators for CPU0 */ +}; + +&i2c5 { + status = "okay"; + /* Voltage regulators for CPU1 */ +}; + +&i2c6 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c7 { + status = "okay"; + /* CPLD */ +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","","","nic_func_mode0","nic_func_mode1","","","", + /*E0-E7*/ "","ncsi_cfg","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","id-button","","","","","", + /*P0-P7*/ "","fsi-trans","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","seq_cont", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","led_alarm_yellow","fsi-data","led_alarm_red", + "led_power","","","led_identify", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + + nic_func_mode0 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + output-low; + }; + nic_func_mode1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + output-low; + }; + seq_cont { + gpio-hog; + gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-low; + }; + ncsi_cfg { + gpio-hog; + input; + gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>; + }; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&ibt { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi"
Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured by YADRO. Signed-off-by: Alexander Filippov <a.filippov@yadro.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 316 ++++++++++++++++++++ 2 files changed, 317 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts