| Message ID | 1588500367-1056-1-git-send-email-chenhc@lemote.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | KVM: MIPS: Add Loongson-3 support (Host Side) | expand |
нед, 3. мај 2020. у 12:06 Huacai Chen <chenhc@lemote.com> је написао/ла: > > We are preparing to add KVM support for Loongson-3. VZ extension is > fully supported in Loongson-3A R4+, and we will not care about old CPUs > (at least now). We already have a full functional Linux kernel (based > on Linux-5.4.x LTS) and QEMU (based on 5.0.0-rc2) and their git > repositories are here: > > QEMU: https://github.com/chenhuacai/qemu > Kernel: https://github.com/chenhuacai/linux > > Of course these two repositories need to be rework and not suitable for > upstream (especially the commits need to be splitted). We show them here > is just to tell others what we have done, and how KVM/Loongson will look > like. > > Our plan is make the KVM host side be upstream first, and after that, > we will make the KVM guest side and QEMU emulator be upstream. > Huacei, I absolutely salute this series, as it is, in my opinion, of tremendous significance not only for Loongson, but also for KVM for MIPS in general. As you probably know, James Hogan left KVM for MIPS kernel maintainership some time ago. It was really too bad, as he was and still is, from my direct experience, an excellent colleague and engineer. KVM for MIPS kernel maintainership left orphaned put me (as the maintainer for KVM for MIPS in QEMU) in an awkward position. May I ask that you and me jointly assume KVM for MIPS kernel maintainership? For me, it makes perfect sense, and I would certainly enjoy working with you. If you agree, please add such patch at the end of this series, in its next version. Yours, Aleksandar > V1 -> V2: > 1, Remove "mips: define pud_index() regardless of page table folding" > because it has been applied. > 2, Make Loongson-specific code be guarded by CONFIG_CPU_LOONGSON64. > > V2 -> V3: > 1, Emulate a reduced feature list of CPUCFG. > 2, Fix all possible checkpatch.pl errors and warnings. > > Xing Li(2): > KVM: MIPS: Define KVM_ENTRYHI_ASID to cpu_asid_mask(&boot_cpu_data) > KVM: MIPS: Fix VPN2_MASK definition for variable cpu_vmbits > > Huacai Chen(12): > KVM: MIPS: Increase KVM_MAX_VCPUS and KVM_USER_MEM_SLOTS to 16 > KVM: MIPS: Add EVENTFD support which is needed by VHOST > KVM: MIPS: Use lddir/ldpte instructions to lookup gpa_mm.pgd > KVM: MIPS: Introduce and use cpu_guest_has_ldpte > KVM: MIPS: Use root tlb to control guest's CCA for Loongson-3 > KVM: MIPS: Let indexed cacheops cause guest exit on Loongson-3 > KVM: MIPS: Add more types of virtual interrupts > KVM: MIPS: Add Loongson-3 Virtual IPI interrupt support > KVM: MIPS: Add CPUCFG emulation for Loongson-3 > KVM: MIPS: Add CONFIG6 and DIAG registers emulation > KVM: MIPS: Add more MMIO load/store instructions emulation > KVM: MIPS: Enable KVM support for Loongson-3 > > Signed-off-by: Huacai Chen <chenhc@lemote.com> > --- > arch/mips/Kconfig | 1 + > arch/mips/include/asm/cpu-features.h | 3 + > arch/mips/include/asm/kvm_host.h | 52 +++- > arch/mips/include/asm/mipsregs.h | 7 + > arch/mips/include/uapi/asm/inst.h | 11 + > arch/mips/kernel/cpu-probe.c | 2 + > arch/mips/kvm/Kconfig | 1 + > arch/mips/kvm/Makefile | 5 +- > arch/mips/kvm/emulate.c | 503 ++++++++++++++++++++++++++++++++++- > arch/mips/kvm/entry.c | 19 +- > arch/mips/kvm/interrupt.c | 93 +------ > arch/mips/kvm/interrupt.h | 14 +- > arch/mips/kvm/loongson_ipi.c | 214 +++++++++++++++ > arch/mips/kvm/mips.c | 49 +++- > arch/mips/kvm/tlb.c | 41 +++ > arch/mips/kvm/trap_emul.c | 3 + > arch/mips/kvm/vz.c | 235 +++++++++++----- > 17 files changed, 1087 insertions(+), 166 deletions(-) > create mode 100644 arch/mips/kvm/loongson_ipi.c > -- > 2.7.0
Hi, Aleksandar, On Fri, May 8, 2020 at 7:43 PM Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> wrote: > > нед, 3. мај 2020. у 12:06 Huacai Chen <chenhc@lemote.com> је написао/ла: > > > > We are preparing to add KVM support for Loongson-3. VZ extension is > > fully supported in Loongson-3A R4+, and we will not care about old CPUs > > (at least now). We already have a full functional Linux kernel (based > > on Linux-5.4.x LTS) and QEMU (based on 5.0.0-rc2) and their git > > repositories are here: > > > > QEMU: https://github.com/chenhuacai/qemu > > Kernel: https://github.com/chenhuacai/linux > > > > Of course these two repositories need to be rework and not suitable for > > upstream (especially the commits need to be splitted). We show them here > > is just to tell others what we have done, and how KVM/Loongson will look > > like. > > > > Our plan is make the KVM host side be upstream first, and after that, > > we will make the KVM guest side and QEMU emulator be upstream. > > > > Huacei, I absolutely salute this series, as it is, in my opinion, of > tremendous significance not only for Loongson, but also for KVM for > MIPS in general. > > As you probably know, James Hogan left KVM for MIPS kernel > maintainership some time ago. It was really too bad, as he was and > still is, from my direct experience, an excellent colleague and > engineer. > > KVM for MIPS kernel maintainership left orphaned put me (as the > maintainer for KVM for MIPS in QEMU) in an awkward position. > > May I ask that you and me jointly assume KVM for MIPS kernel > maintainership? For me, it makes perfect sense, and I would certainly > enjoy working with you. If you agree, please add such patch at the end > of this series, in its next version. I'm very glad to join maintainership with you, thank you for your invitation. Regards, Huacai > > Yours, > Aleksandar > > > > V1 -> V2: > > 1, Remove "mips: define pud_index() regardless of page table folding" > > because it has been applied. > > 2, Make Loongson-specific code be guarded by CONFIG_CPU_LOONGSON64. > > > > V2 -> V3: > > 1, Emulate a reduced feature list of CPUCFG. > > 2, Fix all possible checkpatch.pl errors and warnings. > > > > Xing Li(2): > > KVM: MIPS: Define KVM_ENTRYHI_ASID to cpu_asid_mask(&boot_cpu_data) > > KVM: MIPS: Fix VPN2_MASK definition for variable cpu_vmbits > > > > Huacai Chen(12): > > KVM: MIPS: Increase KVM_MAX_VCPUS and KVM_USER_MEM_SLOTS to 16 > > KVM: MIPS: Add EVENTFD support which is needed by VHOST > > KVM: MIPS: Use lddir/ldpte instructions to lookup gpa_mm.pgd > > KVM: MIPS: Introduce and use cpu_guest_has_ldpte > > KVM: MIPS: Use root tlb to control guest's CCA for Loongson-3 > > KVM: MIPS: Let indexed cacheops cause guest exit on Loongson-3 > > KVM: MIPS: Add more types of virtual interrupts > > KVM: MIPS: Add Loongson-3 Virtual IPI interrupt support > > KVM: MIPS: Add CPUCFG emulation for Loongson-3 > > KVM: MIPS: Add CONFIG6 and DIAG registers emulation > > KVM: MIPS: Add more MMIO load/store instructions emulation > > KVM: MIPS: Enable KVM support for Loongson-3 > > > > Signed-off-by: Huacai Chen <chenhc@lemote.com> > > --- > > arch/mips/Kconfig | 1 + > > arch/mips/include/asm/cpu-features.h | 3 + > > arch/mips/include/asm/kvm_host.h | 52 +++- > > arch/mips/include/asm/mipsregs.h | 7 + > > arch/mips/include/uapi/asm/inst.h | 11 + > > arch/mips/kernel/cpu-probe.c | 2 + > > arch/mips/kvm/Kconfig | 1 + > > arch/mips/kvm/Makefile | 5 +- > > arch/mips/kvm/emulate.c | 503 ++++++++++++++++++++++++++++++++++- > > arch/mips/kvm/entry.c | 19 +- > > arch/mips/kvm/interrupt.c | 93 +------ > > arch/mips/kvm/interrupt.h | 14 +- > > arch/mips/kvm/loongson_ipi.c | 214 +++++++++++++++ > > arch/mips/kvm/mips.c | 49 +++- > > arch/mips/kvm/tlb.c | 41 +++ > > arch/mips/kvm/trap_emul.c | 3 + > > arch/mips/kvm/vz.c | 235 +++++++++++----- > > 17 files changed, 1087 insertions(+), 166 deletions(-) > > create mode 100644 arch/mips/kvm/loongson_ipi.c > > -- > > 2.7.0
We are preparing to add KVM support for Loongson-3. VZ extension is fully supported in Loongson-3A R4+, and we will not care about old CPUs (at least now). We already have a full functional Linux kernel (based on Linux-5.4.x LTS) and QEMU (based on 5.0.0-rc2) and their git repositories are here: QEMU: https://github.com/chenhuacai/qemu Kernel: https://github.com/chenhuacai/linux Of course these two repositories need to be rework and not suitable for upstream (especially the commits need to be splitted). We show them here is just to tell others what we have done, and how KVM/Loongson will look like. Our plan is make the KVM host side be upstream first, and after that, we will make the KVM guest side and QEMU emulator be upstream. V1 -> V2: 1, Remove "mips: define pud_index() regardless of page table folding" because it has been applied. 2, Make Loongson-specific code be guarded by CONFIG_CPU_LOONGSON64. V2 -> V3: 1, Emulate a reduced feature list of CPUCFG. 2, Fix all possible checkpatch.pl errors and warnings. Xing Li(2): KVM: MIPS: Define KVM_ENTRYHI_ASID to cpu_asid_mask(&boot_cpu_data) KVM: MIPS: Fix VPN2_MASK definition for variable cpu_vmbits Huacai Chen(12): KVM: MIPS: Increase KVM_MAX_VCPUS and KVM_USER_MEM_SLOTS to 16 KVM: MIPS: Add EVENTFD support which is needed by VHOST KVM: MIPS: Use lddir/ldpte instructions to lookup gpa_mm.pgd KVM: MIPS: Introduce and use cpu_guest_has_ldpte KVM: MIPS: Use root tlb to control guest's CCA for Loongson-3 KVM: MIPS: Let indexed cacheops cause guest exit on Loongson-3 KVM: MIPS: Add more types of virtual interrupts KVM: MIPS: Add Loongson-3 Virtual IPI interrupt support KVM: MIPS: Add CPUCFG emulation for Loongson-3 KVM: MIPS: Add CONFIG6 and DIAG registers emulation KVM: MIPS: Add more MMIO load/store instructions emulation KVM: MIPS: Enable KVM support for Loongson-3 Signed-off-by: Huacai Chen <chenhc@lemote.com> --- arch/mips/Kconfig | 1 + arch/mips/include/asm/cpu-features.h | 3 + arch/mips/include/asm/kvm_host.h | 52 +++- arch/mips/include/asm/mipsregs.h | 7 + arch/mips/include/uapi/asm/inst.h | 11 + arch/mips/kernel/cpu-probe.c | 2 + arch/mips/kvm/Kconfig | 1 + arch/mips/kvm/Makefile | 5 +- arch/mips/kvm/emulate.c | 503 ++++++++++++++++++++++++++++++++++- arch/mips/kvm/entry.c | 19 +- arch/mips/kvm/interrupt.c | 93 +------ arch/mips/kvm/interrupt.h | 14 +- arch/mips/kvm/loongson_ipi.c | 214 +++++++++++++++ arch/mips/kvm/mips.c | 49 +++- arch/mips/kvm/tlb.c | 41 +++ arch/mips/kvm/trap_emul.c | 3 + arch/mips/kvm/vz.c | 235 +++++++++++----- 17 files changed, 1087 insertions(+), 166 deletions(-) create mode 100644 arch/mips/kvm/loongson_ipi.c -- 2.7.0