@@ -29,58 +29,6 @@ static struct au1550nd_ctx *chip_to_au_ctx(struct nand_chip *this)
return container_of(this, struct au1550nd_ctx, chip);
}
-/**
- * au_read_byte - read one byte from the chip
- * @this: NAND chip object
- *
- * read function for 8bit buswidth
- */
-static u_char au_read_byte(struct nand_chip *this)
-{
- u_char ret = readb(this->legacy.IO_ADDR_R);
- wmb(); /* drain writebuffer */
- return ret;
-}
-
-/**
- * au_write_byte - write one byte to the chip
- * @this: NAND chip object
- * @byte: pointer to data byte to write
- *
- * write function for 8it buswidth
- */
-static void au_write_byte(struct nand_chip *this, u_char byte)
-{
- writeb(byte, this->legacy.IO_ADDR_W);
- wmb(); /* drain writebuffer */
-}
-
-/**
- * au_read_byte16 - read one byte endianness aware from the chip
- * @this: NAND chip object
- *
- * read function for 16bit buswidth with endianness conversion
- */
-static u_char au_read_byte16(struct nand_chip *this)
-{
- u_char ret = (u_char) cpu_to_le16(readw(this->legacy.IO_ADDR_R));
- wmb(); /* drain writebuffer */
- return ret;
-}
-
-/**
- * au_write_byte16 - write one byte endianness aware to the chip
- * @this: NAND chip object
- * @byte: pointer to data byte to write
- *
- * write function for 16bit buswidth with endianness conversion
- */
-static void au_write_byte16(struct nand_chip *this, u_char byte)
-{
- writew(le16_to_cpu((u16) byte), this->legacy.IO_ADDR_W);
- wmb(); /* drain writebuffer */
-}
-
/**
* au_write_buf - write buffer to chip
* @this: NAND chip object
@@ -162,206 +110,6 @@ static void au_read_buf16(struct nand_chip *this, u_char *buf, int len)
}
}
-/* Select the chip by setting nCE to low */
-#define NAND_CTL_SETNCE 1
-/* Deselect the chip by setting nCE to high */
-#define NAND_CTL_CLRNCE 2
-/* Select the command latch by setting CLE to high */
-#define NAND_CTL_SETCLE 3
-/* Deselect the command latch by setting CLE to low */
-#define NAND_CTL_CLRCLE 4
-/* Select the address latch by setting ALE to high */
-#define NAND_CTL_SETALE 5
-/* Deselect the address latch by setting ALE to low */
-#define NAND_CTL_CLRALE 6
-
-static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
-{
- struct nand_chip *this = mtd_to_nand(mtd);
- struct au1550nd_ctx *ctx = container_of(this, struct au1550nd_ctx,
- chip);
-
- switch (cmd) {
-
- case NAND_CTL_SETCLE:
- this->legacy.IO_ADDR_W = ctx->base + MEM_STNAND_CMD;
- break;
-
- case NAND_CTL_CLRCLE:
- this->legacy.IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
- break;
-
- case NAND_CTL_SETALE:
- this->legacy.IO_ADDR_W = ctx->base + MEM_STNAND_ADDR;
- break;
-
- case NAND_CTL_CLRALE:
- this->legacy.IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
- /* FIXME: Nobody knows why this is necessary,
- * but it works only that way */
- udelay(1);
- break;
-
- case NAND_CTL_SETNCE:
- /* assert (force assert) chip enable */
- alchemy_wrsmem((1 << (4 + ctx->cs)), AU1000_MEM_STNDCTL);
- break;
-
- case NAND_CTL_CLRNCE:
- /* deassert chip enable */
- alchemy_wrsmem(0, AU1000_MEM_STNDCTL);
- break;
- }
-
- this->legacy.IO_ADDR_R = this->legacy.IO_ADDR_W;
-
- wmb(); /* Drain the writebuffer */
-}
-
-int au1550_device_ready(struct nand_chip *this)
-{
- return (alchemy_rdsmem(AU1000_MEM_STSTAT) & 0x1) ? 1 : 0;
-}
-
-/**
- * au1550_select_chip - control -CE line
- * Forbid driving -CE manually permitting the NAND controller to do this.
- * Keeping -CE asserted during the whole sector reads interferes with the
- * NOR flash and PCMCIA drivers as it causes contention on the static bus.
- * We only have to hold -CE low for the NAND read commands since the flash
- * chip needs it to be asserted during chip not ready time but the NAND
- * controller keeps it released.
- *
- * @this: NAND chip object
- * @chip: chipnumber to select, -1 for deselect
- */
-static void au1550_select_chip(struct nand_chip *this, int chip)
-{
-}
-
-/**
- * au1550_command - Send command to NAND device
- * @this: NAND chip object
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
- */
-static void au1550_command(struct nand_chip *this, unsigned command,
- int column, int page_addr)
-{
- struct mtd_info *mtd = nand_to_mtd(this);
- struct au1550nd_ctx *ctx = container_of(this, struct au1550nd_ctx,
- chip);
- int ce_override = 0, i;
- unsigned long flags = 0;
-
- /* Begin command latch cycle */
- au1550_hwcontrol(mtd, NAND_CTL_SETCLE);
- /*
- * Write out the command to the device.
- */
- if (command == NAND_CMD_SEQIN) {
- int readcmd;
-
- if (column >= mtd->writesize) {
- /* OOB area */
- column -= mtd->writesize;
- readcmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- /* First 256 bytes --> READ0 */
- readcmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- readcmd = NAND_CMD_READ1;
- }
- ctx->write_byte(this, readcmd);
- }
- ctx->write_byte(this, command);
-
- /* Set ALE and clear CLE to start address cycle */
- au1550_hwcontrol(mtd, NAND_CTL_CLRCLE);
-
- if (column != -1 || page_addr != -1) {
- au1550_hwcontrol(mtd, NAND_CTL_SETALE);
-
- /* Serially input address */
- if (column != -1) {
- /* Adjust columns for 16 bit buswidth */
- if (this->options & NAND_BUSWIDTH_16 &&
- !nand_opcode_8bits(command))
- column >>= 1;
- ctx->write_byte(this, column);
- }
- if (page_addr != -1) {
- ctx->write_byte(this, (u8)(page_addr & 0xff));
-
- if (command == NAND_CMD_READ0 ||
- command == NAND_CMD_READ1 ||
- command == NAND_CMD_READOOB) {
- /*
- * NAND controller will release -CE after
- * the last address byte is written, so we'll
- * have to forcibly assert it. No interrupts
- * are allowed while we do this as we don't
- * want the NOR flash or PCMCIA drivers to
- * steal our precious bytes of data...
- */
- ce_override = 1;
- local_irq_save(flags);
- au1550_hwcontrol(mtd, NAND_CTL_SETNCE);
- }
-
- ctx->write_byte(this, (u8)(page_addr >> 8));
-
- if (this->options & NAND_ROW_ADDR_3)
- ctx->write_byte(this,
- ((page_addr >> 16) & 0x0f));
- }
- /* Latch in address */
- au1550_hwcontrol(mtd, NAND_CTL_CLRALE);
- }
-
- /*
- * Program and erase have their own busy handlers.
- * Status and sequential in need no delay.
- */
- switch (command) {
-
- case NAND_CMD_PAGEPROG:
- case NAND_CMD_ERASE1:
- case NAND_CMD_ERASE2:
- case NAND_CMD_SEQIN:
- case NAND_CMD_STATUS:
- return;
-
- case NAND_CMD_RESET:
- break;
-
- case NAND_CMD_READ0:
- case NAND_CMD_READ1:
- case NAND_CMD_READOOB:
- /* Check if we're really driving -CE low (just in case) */
- if (unlikely(!ce_override))
- break;
-
- /* Apply a short delay always to ensure that we do wait tWB. */
- ndelay(100);
- /* Wait for a chip to become ready... */
- for (i = this->legacy.chip_delay;
- !this->legacy.dev_ready(this) && i > 0; --i)
- udelay(1);
-
- /* Release -CE and re-enable interrupts. */
- au1550_hwcontrol(mtd, NAND_CTL_CLRNCE);
- local_irq_restore(flags);
- return;
- }
- /* Apply this short delay always to ensure that we do wait tWB. */
- ndelay(100);
-
- while(!this->legacy.dev_ready(this));
-}
-
static int find_nand_cs(unsigned long nand_base)
{
void __iomem *base =
@@ -540,12 +288,6 @@ static int au1550nd_probe(struct platform_device *pdev)
}
ctx->cs = cs;
- this->legacy.dev_ready = au1550_device_ready;
- this->legacy.select_chip = au1550_select_chip;
- this->legacy.cmdfunc = au1550_command;
-
- /* 30 us command delay time */
- this->legacy.chip_delay = 30;
nand_controller_init(&ctx->controller);
ctx->controller.ops = &au1550nd_ops;
this->controller = &ctx->controller;
@@ -555,11 +297,6 @@ static int au1550nd_probe(struct platform_device *pdev)
if (pd->devwidth)
this->options |= NAND_BUSWIDTH_16;
- this->legacy.read_byte = (pd->devwidth) ? au_read_byte16 : au_read_byte;
- ctx->write_byte = (pd->devwidth) ? au_write_byte16 : au_write_byte;
- this->legacy.write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf;
- this->legacy.read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf;
-
ret = nand_scan(this, 1);
if (ret) {
dev_err(&pdev->dev, "NAND scan failed with %d\n", ret);
Now that exec_op() is implemented we can get rid of all other hooks. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> --- drivers/mtd/nand/raw/au1550nd.c | 263 -------------------------------- 1 file changed, 263 deletions(-)