diff mbox series

[v3] usb: typec: mux: intel: Fix DP_HPD_LVL bit field

Message ID 20200511091837.102508-1-pmalani@chromium.org (mailing list archive)
State Mainlined
Commit 5c4edcdbcd97fb3fb657898d0463afb84e4fbbb3
Headers show
Series [v3] usb: typec: mux: intel: Fix DP_HPD_LVL bit field | expand

Commit Message

Prashant Malani May 11, 2020, 9:18 a.m. UTC
According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.6, the PMC HPD request LVL bit field is bit 4.
Fix the definition here to match the programming guide.

Since this bit field is changing, explicitly define a field for the
HPD_HIGH mode data bit.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Reviewed-by: Benson Leung <bleung@chromium.org>
---

Changes in v3:
- Fixed sorting of the bit field after modification.

Changes in v2:
- Fixed bit error in commit message.

 drivers/usb/typec/mux/intel_pmc_mux.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Heikki Krogerus May 11, 2020, 10:19 a.m. UTC | #1
On Mon, May 11, 2020 at 02:18:34AM -0700, Prashant Malani wrote:
> According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
> 0.6, the PMC HPD request LVL bit field is bit 4.
> Fix the definition here to match the programming guide.
> 
> Since this bit field is changing, explicitly define a field for the
> HPD_HIGH mode data bit.
> 
> Signed-off-by: Prashant Malani <pmalani@chromium.org>
> Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
> Reviewed-by: Benson Leung <bleung@chromium.org>

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
> 
> Changes in v3:
> - Fixed sorting of the bit field after modification.
> 
> Changes in v2:
> - Fixed bit error in commit message.
> 
>  drivers/usb/typec/mux/intel_pmc_mux.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
> index 67c5139cfa0d..c22e5c4bbf1a 100644
> --- a/drivers/usb/typec/mux/intel_pmc_mux.c
> +++ b/drivers/usb/typec/mux/intel_pmc_mux.c
> @@ -63,6 +63,7 @@ enum {
>  #define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
>  
>  /* TBT specific Mode Data bits */
> +#define PMC_USB_ALTMODE_HPD_HIGH	BIT(14)
>  #define PMC_USB_ALTMODE_TBT_TYPE	BIT(17)
>  #define PMC_USB_ALTMODE_CABLE_TYPE	BIT(18)
>  #define PMC_USB_ALTMODE_ACTIVE_LINK	BIT(20)
> @@ -74,8 +75,8 @@ enum {
>  #define PMC_USB_ALTMODE_TBT_GEN(_g_)	(((_g_) & GENMASK(1, 0)) << 28)
>  
>  /* Display HPD Request bits */
> +#define PMC_USB_DP_HPD_LVL		BIT(4)
>  #define PMC_USB_DP_HPD_IRQ		BIT(5)
> -#define PMC_USB_DP_HPD_LVL		BIT(6)
>  
>  struct pmc_usb;
>  
> @@ -158,8 +159,7 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
>  			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
>  
>  	if (data->status & DP_STATUS_HPD_STATE)
> -		req.mode_data |= PMC_USB_DP_HPD_LVL <<
> -				 PMC_USB_ALTMODE_DP_MODE_SHIFT;
> +		req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH;
>  
>  	return pmc_usb_command(port, (void *)&req, sizeof(req));
>  }
> -- 
> 2.26.2.645.ge9eca65c58-goog
diff mbox series

Patch

diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index 67c5139cfa0d..c22e5c4bbf1a 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -63,6 +63,7 @@  enum {
 #define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
 
 /* TBT specific Mode Data bits */
+#define PMC_USB_ALTMODE_HPD_HIGH	BIT(14)
 #define PMC_USB_ALTMODE_TBT_TYPE	BIT(17)
 #define PMC_USB_ALTMODE_CABLE_TYPE	BIT(18)
 #define PMC_USB_ALTMODE_ACTIVE_LINK	BIT(20)
@@ -74,8 +75,8 @@  enum {
 #define PMC_USB_ALTMODE_TBT_GEN(_g_)	(((_g_) & GENMASK(1, 0)) << 28)
 
 /* Display HPD Request bits */
+#define PMC_USB_DP_HPD_LVL		BIT(4)
 #define PMC_USB_DP_HPD_IRQ		BIT(5)
-#define PMC_USB_DP_HPD_LVL		BIT(6)
 
 struct pmc_usb;
 
@@ -158,8 +159,7 @@  pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
 			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
 
 	if (data->status & DP_STATUS_HPD_STATE)
-		req.mode_data |= PMC_USB_DP_HPD_LVL <<
-				 PMC_USB_ALTMODE_DP_MODE_SHIFT;
+		req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH;
 
 	return pmc_usb_command(port, (void *)&req, sizeof(req));
 }