Message ID | 20200514131338.v2.1.I68404fc395a3dbc57c8a89ca02490013e8003a87@changeid (mailing list archive) |
---|---|
State | Accepted |
Delegated to: | Marcel Holtmann |
Headers | show |
Series | [v2] Bluetooth: hci_qca: Enable WBS support for wcn3991 | expand |
Hi Abhishek, On Thu, May 14, 2020 at 01:14:04PM -0700, Abhishek Pandit-Subedi wrote: > WCN3991 supports transparent WBS (host encoded mSBC). Add a flag to the > device match data to show WBS is supported. > > This requires the matching firmware for WCN3991 in linux-firmware: > 1a8b0dc00f77 (qca: Enable transparent WBS for WCN3991) > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > --- > > Changes in v2: > - Rename struct to qca_capabilities and fix enum naming > > drivers/bluetooth/hci_qca.c | 23 +++++++++++++++++------ > 1 file changed, 17 insertions(+), 6 deletions(-) > > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c > index b3fd07a6f8127..96799644f0933 100644 > --- a/drivers/bluetooth/hci_qca.c > +++ b/drivers/bluetooth/hci_qca.c > @@ -75,6 +75,9 @@ enum qca_flags { > QCA_HW_ERROR_EVENT > }; > > +enum qca_capabilities { > + QCA_CAP_WIDEBAND_SPEECH_SUPPORTED = BIT(0), nit: the '_SUPPORTED' suffix seems somewhat redundant, given that this is a capability (as 'CAP' indicates). Up to you if you want to keep it. > +}; > > /* HCI_IBS transmit side sleep protocol states */ > enum tx_ibs_states { > @@ -187,10 +190,11 @@ struct qca_vreg { > unsigned int load_uA; > }; > > -struct qca_vreg_data { > +struct qca_device_data { > enum qca_btsoc_type soc_type; > struct qca_vreg *vregs; > size_t num_vregs; > + uint32_t capabilities; > }; > > /* > @@ -1691,7 +1695,7 @@ static const struct hci_uart_proto qca_proto = { > .dequeue = qca_dequeue, > }; > > -static const struct qca_vreg_data qca_soc_data_wcn3990 = { > +static const struct qca_device_data qca_soc_data_wcn3990 = { > .soc_type = QCA_WCN3990, > .vregs = (struct qca_vreg []) { > { "vddio", 15000 }, > @@ -1702,7 +1706,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3990 = { > .num_vregs = 4, > }; > > -static const struct qca_vreg_data qca_soc_data_wcn3991 = { > +static const struct qca_device_data qca_soc_data_wcn3991 = { > .soc_type = QCA_WCN3991, > .vregs = (struct qca_vreg []) { > { "vddio", 15000 }, > @@ -1711,9 +1715,10 @@ static const struct qca_vreg_data qca_soc_data_wcn3991 = { > { "vddch0", 450000 }, > }, > .num_vregs = 4, > + .capabilities = QCA_CAP_WIDEBAND_SPEECH_SUPPORTED, > }; > > -static const struct qca_vreg_data qca_soc_data_wcn3998 = { > +static const struct qca_device_data qca_soc_data_wcn3998 = { > .soc_type = QCA_WCN3998, > .vregs = (struct qca_vreg []) { > { "vddio", 10000 }, > @@ -1724,7 +1729,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3998 = { > .num_vregs = 4, > }; > > -static const struct qca_vreg_data qca_soc_data_qca6390 = { > +static const struct qca_device_data qca_soc_data_qca6390 = { > .soc_type = QCA_QCA6390, > .num_vregs = 0, > }; > @@ -1860,7 +1865,7 @@ static int qca_serdev_probe(struct serdev_device *serdev) > { > struct qca_serdev *qcadev; > struct hci_dev *hdev; > - const struct qca_vreg_data *data; > + const struct qca_device_data *data; > int err; > bool power_ctrl_enabled = true; > > @@ -1948,6 +1953,12 @@ static int qca_serdev_probe(struct serdev_device *serdev) > hdev->shutdown = qca_power_off; > } > > + /* Wideband speech support must be set per driver since it can't be > + * queried via hci. > + */ > + if (data && (data->capabilities & QCA_CAP_WIDEBAND_SPEECH_SUPPORTED)) > + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); > + > return 0; > } Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Hi Abhishek, > WCN3991 supports transparent WBS (host encoded mSBC). Add a flag to the > device match data to show WBS is supported. > > This requires the matching firmware for WCN3991 in linux-firmware: > 1a8b0dc00f77 (qca: Enable transparent WBS for WCN3991) > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > --- > > Changes in v2: > - Rename struct to qca_capabilities and fix enum naming > > drivers/bluetooth/hci_qca.c | 23 +++++++++++++++++------ > 1 file changed, 17 insertions(+), 6 deletions(-) patch has been applied to bluetooth-next tree. Regards Marcel
Thanks Marcel. On Mon, May 18, 2020 at 1:03 AM Marcel Holtmann <marcel@holtmann.org> wrote: > > Hi Abhishek, > > > WCN3991 supports transparent WBS (host encoded mSBC). Add a flag to the > > device match data to show WBS is supported. > > > > This requires the matching firmware for WCN3991 in linux-firmware: > > 1a8b0dc00f77 (qca: Enable transparent WBS for WCN3991) > > > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> > > --- > > > > Changes in v2: > > - Rename struct to qca_capabilities and fix enum naming > > > > drivers/bluetooth/hci_qca.c | 23 +++++++++++++++++------ > > 1 file changed, 17 insertions(+), 6 deletions(-) > > patch has been applied to bluetooth-next tree. > > Regards > > Marcel >
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index b3fd07a6f8127..96799644f0933 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -75,6 +75,9 @@ enum qca_flags { QCA_HW_ERROR_EVENT }; +enum qca_capabilities { + QCA_CAP_WIDEBAND_SPEECH_SUPPORTED = BIT(0), +}; /* HCI_IBS transmit side sleep protocol states */ enum tx_ibs_states { @@ -187,10 +190,11 @@ struct qca_vreg { unsigned int load_uA; }; -struct qca_vreg_data { +struct qca_device_data { enum qca_btsoc_type soc_type; struct qca_vreg *vregs; size_t num_vregs; + uint32_t capabilities; }; /* @@ -1691,7 +1695,7 @@ static const struct hci_uart_proto qca_proto = { .dequeue = qca_dequeue, }; -static const struct qca_vreg_data qca_soc_data_wcn3990 = { +static const struct qca_device_data qca_soc_data_wcn3990 = { .soc_type = QCA_WCN3990, .vregs = (struct qca_vreg []) { { "vddio", 15000 }, @@ -1702,7 +1706,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3990 = { .num_vregs = 4, }; -static const struct qca_vreg_data qca_soc_data_wcn3991 = { +static const struct qca_device_data qca_soc_data_wcn3991 = { .soc_type = QCA_WCN3991, .vregs = (struct qca_vreg []) { { "vddio", 15000 }, @@ -1711,9 +1715,10 @@ static const struct qca_vreg_data qca_soc_data_wcn3991 = { { "vddch0", 450000 }, }, .num_vregs = 4, + .capabilities = QCA_CAP_WIDEBAND_SPEECH_SUPPORTED, }; -static const struct qca_vreg_data qca_soc_data_wcn3998 = { +static const struct qca_device_data qca_soc_data_wcn3998 = { .soc_type = QCA_WCN3998, .vregs = (struct qca_vreg []) { { "vddio", 10000 }, @@ -1724,7 +1729,7 @@ static const struct qca_vreg_data qca_soc_data_wcn3998 = { .num_vregs = 4, }; -static const struct qca_vreg_data qca_soc_data_qca6390 = { +static const struct qca_device_data qca_soc_data_qca6390 = { .soc_type = QCA_QCA6390, .num_vregs = 0, }; @@ -1860,7 +1865,7 @@ static int qca_serdev_probe(struct serdev_device *serdev) { struct qca_serdev *qcadev; struct hci_dev *hdev; - const struct qca_vreg_data *data; + const struct qca_device_data *data; int err; bool power_ctrl_enabled = true; @@ -1948,6 +1953,12 @@ static int qca_serdev_probe(struct serdev_device *serdev) hdev->shutdown = qca_power_off; } + /* Wideband speech support must be set per driver since it can't be + * queried via hci. + */ + if (data && (data->capabilities & QCA_CAP_WIDEBAND_SPEECH_SUPPORTED)) + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); + return 0; }
WCN3991 supports transparent WBS (host encoded mSBC). Add a flag to the device match data to show WBS is supported. This requires the matching firmware for WCN3991 in linux-firmware: 1a8b0dc00f77 (qca: Enable transparent WBS for WCN3991) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> --- Changes in v2: - Rename struct to qca_capabilities and fix enum naming drivers/bluetooth/hci_qca.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-)